STMicroelectronics

STM32L151C8U6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics

Référence : STM32L151C8U6 ✗ Fin de vie
3 V Vdss 48-UFQFPN, 7 x 7 mm Package 32 MHz Speed 64 KB (64K x 8) Memory
MOQ : 1 |

STM32L151C8U6 Présentation

The STMicroelectronics STM32L151C8U6 is an ultra-low-power 32-bit microcontroller built around an ARM Cortex-M3 core, operating at up to 32 MHz with 64 KB of Flash memory and 10 KB of RAM in a 48-UFQFPN 7 x 7 mm surface-mount package. It combines low-power embedded control with USB connectivity, an RTC, analog conversion, and programmable I/O.

A microcontroller is a compact embedded-computing IC that integrates a processor core, Flash program memory, RAM, peripherals, and communication interfaces on one semiconductor device. The STM32L151 belongs to the STM32L1 ultra-low-power MCU family, where the hierarchy extends from Arm Cortex-M microcontroller to embedded processor, embedded controller, and semiconductor. This positioning makes it suitable for compact, battery-operated, or energy-conscious systems that require more processing capability than a basic 8-bit controller.

The STM32L151C8U6 provides 64 KB of Flash organized as 64K x 8, 10 KB of SRAM, and a maximum CPU frequency of 32 MHz. Its STM32L1 feature set includes USB connectivity, an RTC with low-power timekeeping capability, LCD drive support, an ultra-low-power 12-bit ADC, comparators, and operational amplifiers. These integrated resources can reduce external component count in sensing, logging, control, and USB-connected embedded products.

The manufacturer describes the STM32L151x6/8/B family as ultra-low-power and suitable for both consumer and industrial embedded systems. The Cortex-M3 architecture supports efficient event-driven firmware, while the large set of timers, serial interfaces, and general-purpose I/O enables motor monitoring, sensor acquisition, communications, and local control without requiring a separate processor.

Typical uses include compact USB data loggers, industrial sensor nodes, low-power environmental monitors, building-automation controllers, portable measurement equipment, and small motor-control systems. The integrated USB interface is especially useful when a product must exchange configuration or logged data with a host computer while maintaining a low component count.

PCB implementation requires careful treatment of the exposed thermal pad, supply decoupling, clock stability, and exposed-pad soldering. Follow the STM32L151/152 datasheet pin definition and recommended land pattern when assigning tracks, and use the manufacturer's recommended decoupling network close to the supply pins. Confirm oscillator, reset, boot, and unused-pin requirements before releasing the PCB.

This product page combines manufacturer specifications, family-level alternatives, package information, and design guidance to support component selection and PCB planning. It also distinguishes genuine same-footprint replacements from related devices that require different packages or different memory configurations.

Alternatives de remplacement direct pour STM32L151C8U6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec STM32L151C8U6 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, SRAM, Product Type, ADC.

STMicroelectronics
Package: LQFP-48 (7x7 mm)
Flash Memory: 64 KB
SRAM: 16 KB
Comparer avec STM32L151C8U6 →
STMicroelectronics
Package: 48-LQFP, 7 x 7 mm
Flash Memory: 128 KB
SRAM: 16 KB
Comparer avec STM32L151C8U6 →
STMicroelectronics
Package: 48-UFQFPN (7x7 mm)
Flash Memory: 128 KB (128K x 8)
SRAM: 16 KB
Comparer avec STM32L151C8U6 →
STMicroelectronics
Package: LQFP-48 (7x7 mm)
Flash Memory: 256 KB
SRAM: 32 KB
Comparer avec STM32L151C8U6 →
STMicroelectronics
Package: 48-pin UFQFPN
Flash Memory: 256 KB
SRAM: 32 KB
Comparer avec STM32L151C8U6 →
STMicroelectronics
Package: 48-pin UFQFPN, 7 mm x 7 mm
Flash Memory: 64 KB
Product Type: 32-bit ARM Cortex-M3 microcontroller
Comparer avec STM32L151C8U6 →

STM32L151C8U6A

✅ Remplacement direct
📦 48-UFQFPN (7 x 7 mm)
Same 32 MHz Cortex-M3 core and 64 KB Flash configuration in the same 48-UFQFPN footprint; the -A ordering code identifies a later device generation.

📋 Alternative de référence (hors catalogue)

STM32L151C8T6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
STMicroelectronics
📦 48-UFQFPN (7 x 7 mm)
ARM Cortex-M3 · 32 MHz · 64 KB · 16 KB · 1.8 V to 3.6 V · LQFP-48 (7x7 mm) · -40C to +85C · 12-bit, 16 channels

Contactez-nous pour le prix

Voir la fiche technique →

STM32L151C8T6A

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 48-UFQFPN (7 x 7 mm)
Same 32 MHz Cortex-M3 core, 64 KB Flash, and 48-UFQFPN footprint; combines the -A device generation with a different final ordering code.

📋 Alternative de référence (hors catalogue)

STM32L151CBT6

✅ Remplacement direct
STMicroelectronics
📦 48-UFQFPN (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 128 KB · 16 KB · 4 KB · ARM 32-bit Cortex-M3 · Integrated USB · Integrated LCD controller

Contactez-nous pour le prix

Voir la fiche technique →

STM32L152C8U6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
STMicroelectronics
📦 48-UFQFPN (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 64 KB · 32-bit ARM Cortex-M3 · 64K x 8 bits · 48-pin UFQFPN, 7 mm x 7 mm · Surface mount · Supported by STM32L152 family

Contactez-nous pour le prix

Voir la fiche technique →

STM32L151C8U6 Valeurs maximales et caractéristiques électriques

Product Type Ultra-low-power 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 64 KB (64K x 8)
SRAM 10 KB
CPU Architecture Arm Cortex-M3
Instruction Width 32 bit
Operating Voltage 3 V
Boîtier 48-UFQFPN, 7 x 7 mm
Type de montage Surface mount
Package Pin Count 48 pins
Exposed Pad Present
USB Connectivity USB device connectivity
ADC Ultra-low-power 12-bit ADC
Analog Peripherals Operational amplifier and comparator
Real-Time Clock RTC with low-power timekeeping
LCD Support LCD driver support

Guide de configuration des broches du STM32L151C8U6 48 pins

Configuration des broches du STM32L151C8U6 (boîtier 48 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 48 pins pour le STM32L151C8U6

Aucune donnée de brochage détaillée disponible pour STM32L151C8U6.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

STM32L151C8U6 convient pour 6 applications: USB-connected environmental sensor node, Industrial data logger, Battery-powered building sensor, Compact USB control and configuration interface, Low-power instrumentation controller, Small motor and actuator monitor.

🧩

USB-connected environmental sensor node

STM32L151C8U6 fits a compact environmental sensor node because its 32 MHz Cortex-M3 core can process sensor readings while the integrated USB connectivity avoids a separate USB interface controller. The ultra-low-power 12-bit ADC supports analog sensor acquisition, while 64 KB of Flash and 10 KB of SRAM provide space for conversion routines, filtering, calibration, and USB data handling. The device is placed between the sensor outputs and a USB connector, with the firmware controlling conversion timing, threshold evaluation, and data transfer. Its low-power STM32L1 positioning is valuable for periodically active nodes, although average current must be calculated from the real sampling and communication duty cycle.

🏭

Industrial data logger

STM32L151C8U6 supports an industrial data logger that must combine local control, event timestamping, and host connectivity in a compact board. The 32 MHz Cortex-M3 processor can supervise multiple sensors, format records, and manage logging intervals, while the RTC provides timekeeping for timestamped events. USB connectivity allows a notebook or service computer to retrieve stored data without adding a separate USB transceiver or communications processor. With 64 KB of Flash and 10 KB of RAM, the MCU is best suited to moderate data volumes and targeted firmware; larger image buffers or extensive logs favor the 128 KB STM32L151CBT6 option after confirming the same footprint.

🏠

Battery-powered building sensor

STM32L151C8U6 is suitable for a battery-powered building sensor where the MCU must wake periodically, acquire a reading, evaluate a threshold, and return to a low-power state. Its Arm Cortex-M3 processing capability supports more sophisticated local filtering than a basic 8-bit controller, while the integrated RTC, comparator, and low-power 12-bit ADC reduce the need for discrete supporting components. The device can supervise occupancy, temperature, or environmental sensors and preserve event timestamps in Flash. Duty-cycle planning and selection of the correct low-power mode are critical because average battery life depends more on wake frequency and peripheral behavior than on the 32 MHz maximum CPU frequency.

🔧

Compact USB control and configuration interface

STM32L151C8U6 can act as the embedded controller for a compact USB configuration interface connected to sensors, relays, or a local display. Its integrated USB device connectivity and 32 MHz Cortex-M3 core handle enumeration, command parsing, device control, and status reporting in one component. The LCD drive capability and analog peripherals allow the same MCU to support a local human interface and threshold control, reducing board area and firmware coordination across multiple devices. Pin assignment should prioritize USB, power, clock, reset, and exposed-pad requirements, while the manufacturer reference circuit should guide decoupling and USB signal routing.

📟

Low-power instrumentation controller

STM32L151C8U6 is appropriate for portable instrumentation that combines analog measurement, local processing, and digital connectivity. The ultra-low-power 12-bit ADC performs measurements, the operational amplifier and comparator support conditioning and threshold detection, and the Cortex-M3 core can calibrate readings and prepare data for transfer. USB connectivity offers a convenient configuration and data path during bench use or service. The 10 KB of SRAM is suitable for modest sample buffers and control state, but designs requiring long acquisition windows should evaluate the 128 KB STM32L151CBT6 and confirm whether the extra Flash affects the application's operating strategy.

⚙️

Small motor and actuator monitor

STM32L151C8U6 can monitor a small motor or actuator system where position sensing, current or temperature evaluation, fault handling, and diagnostic reporting are required. The timers and GPIO resources support periodic sensing and control tasks, while the comparators and 12-bit ADC can evaluate analogue feedback signals. The RTC allows operating events to be timestamped, and USB connectivity simplifies service diagnostics without requiring a separate communications controller. The MCU is appropriate for supervisory rather than high-power motor drive functions; external power transistors remain necessary for load switching, and the exact timer outputs and ADC channels must be assigned against the package pin table.

Récapitulatif des produits recommandés

STM32L151C8U6A Same-family 64 KB Flash upgrade candidate Utilisé dans : USB-connected environmental sensor node, Industrial data logger, Low-power instrumentation controller STM32L152C8U6 STMicroelectronics Utilisé dans : USB-connected environmental sensor node, Compact USB control and configuration interface, Small motor and actuator monitor STM32L151CBT6 STMicroelectronics Utilisé dans : Industrial data logger, Compact USB control and configuration interface, Low-power instrumentation controller STM32L151C8T6 STMicroelectronics Utilisé dans : Battery-powered building sensor STM32L151C8T6A Same-family -A ordering option Utilisé dans : Battery-powered building sensor, Small motor and actuator monitor
What are the key specifications of STM32L151C8U6 that engineers should know?
The STM32L151C8U6 is a 32 MHz, 32-bit Arm Cortex-M3 microcontroller with 64 KB of Flash, 10 KB of SRAM, and a 48-UFQFPN 7 x 7 mm package. According to the STMicroelectronics product page, the STM32L151 family also provides USB connectivity, an RTC, LCD drive support, an ultra-low-power 12-bit ADC, comparators, and operational amplifiers. These features make it appropriate for compact embedded systems where a separate USB interface and several analog functions would otherwise increase board complexity.
Where can I download the STM32L151C8U6 datasheet PDF?
The STM32L151C8U6 technical documentation is available from the official STMicroelectronics product page at the datasheet link on this page. The manufacturer product page identifies the device as part of the STM32L151x6/8/B family, while the family datasheet covers ordering information, pin definitions, electrical characteristics, memory organization, USB, analog functions, timers, and package mechanics. Use the manufacturer copy for design sign-off because it provides the authoritative UFQFPN land pattern, pin table, and recommended application circuits.
Where can I find the STM32L151C8U6 pinout and package drawing?
The STM32L151C8U6 pinout is documented in the pin-description and package sections of the STM32L151/152 manufacturer datasheet. The device is packaged in 48-UFQFPN with a 7 x 7 mm body and an exposed thermal pad. Use the pin-description table to map supply, ground, reset, boot, clocks, USB, analog, and GPIO functions before assigning PCB tracks. The exposed pad is part of the thermal and electrical design and should be connected according to the manufacturer layout guidance.
What is the difference between STM32L151C8U6 and STM32L151C8U6A?
STM32L151C8U6 and STM32L151C8U6A are closely related 32 MHz Cortex-M3 devices, and both are identified as 64 KB Flash members in the 48-UFQFPN format. The manufacturer maintains separate product entries for the original device and the -A generation, so the current ordering information, revision status, and qualification details should be checked for the selected ordering code. For existing production designs, the -A listing can provide a same-family modernization path, but firmware and device-change-control review remain necessary before substitution.
STM32L151C8U6 vs STM32L152C8U6: which MCU is better for USB sensing?
STM32L151C8U6 is the preferred choice when the design primarily needs the STM32L151 feature set, while STM32L152C8U6 belongs to the closely related STM32L152 family and should be selected when its additional capabilities are specifically required. According to the STMicroelectronics family description, both families combine USB, an RTC, LCD support, analog conversion, comparators, and operational amplifiers. The decisive engineering point is the peripheral-feature difference between the L151 and L152 families, not the shared 32 MHz Cortex-M3 architecture.
When should I choose STM32L151C8U6 instead of STM32L151CBT6?
Choose STM32L151C8U6 when 64 KB of Flash is sufficient and the design does not require the larger internal Flash capacity associated with the STM32L151CBT6. Both devices are members of the same STM32L151 family and can use the same 48-pin UFQFPN land pattern when their ordering codes specify that package. The larger-memory alternative is useful for larger protocol stacks, bootloader space, diagnostics, or application firmware, but its memory difference must be checked against firmware partition and update requirements.
What is the best drop-in replacement for STM32L151C8U6?
STM32L151C8U6A is the closest same-family, same-package replacement identified for the STM32L151C8U6 because both provide a 64 KB Cortex-M3 configuration in 48-UFQFPN. STM32L151C8T6 and STM32L151C8T6A provide additional same-footprint options, while STM32L151CBT6 offers more Flash memory. Before approving any substitution, compare the exact ordering code, temperature grade, pin definitions, memory size, peripheral configuration, device revision, and qualification status in the manufacturer documentation.
Can STM32L152C8U6 replace STM32L151C8U6 on the same PCB?
STM32L152C8U6 can be evaluated as a same-footprint STM32L1-family option when its 48-UFQFPN pin definitions and required peripherals are compatible with the completed board. It is not an unconditional substitute because the STM32L151 and STM32L152 families are related but not identical feature sets. Review USB, timer, ADC, LCD, RTC, GPIO, boot, clock, and peripheral assignments, then validate the revised firmware against the exact STM32L152 device identifier and errata information.
Is STM32L151C8U6 suitable for low-power sensor and IoT nodes?
Yes, STM32L151C8U6 is suitable for low-power sensor and IoT nodes because it is an ultra-low-power STM32L1-family device with a 32 MHz Cortex-M3 core and integrated USB connectivity. The manufacturer highlights low active-current capability, an RTC, LCD support, an ultra-low-power 12-bit ADC, comparators, and operational amplifiers. These resources support periodic sensing, local filtering, timestamping, and USB data exchange without requiring separate analog or interface ICs, subject to the device's specified low-power operating modes.
How much power does the STM32L151C8U6 consume?
STM32L151C8U6 consumption depends on the selected operating mode, CPU activity, peripherals, clock rate, and supply voltage. The manufacturer describes the STM32L151 family as ultra-low-power, but a single current figure cannot be applied to every operating condition. Use the DC and sleep-mode characteristics, GPIO drive settings, peripheral configuration, and clock tree in the manufacturer datasheet to estimate average current for the actual duty cycle. The Request a Quote form can confirm availability and lead time for the exact ordering code.
What tools are compatible with STM32L151C8U6 development?
STM32L151C8U6 is programmed through the STM32 microcontroller development ecosystem, including ST-LINK debug and programming tools and compatible ARM Cortex-M toolchains. The Arm Cortex-M3 core supports the standard debug, breakpoint, and memory-access functions expected by IDEs and embedded debuggers. The manufacturer device page and programming manual should be used to select the correct device family, flash algorithm, boot configuration, and debugger settings. Verify peripheral clocks and low-power debug behavior before automating production programming.
Is STM32L151C8U6 in stock and what is its lead time?
Current inventory and lead time should be requested through the Request a Quote form on this page using the exact MPN STM32L151C8U6. Quote requests can confirm orderable packaging, current production status, available quantities, and the applicable lead time. Because availability can vary by region, quantity, and shipment schedule, do not base a build plan on an unconfirmed stock count. The manufacturer and distributor product links on this page provide additional ordering references.
How much does STM32L151C8U6 cost?
The current unit price for STM32L151C8U6 is displayed through the platform pricing area and can also be confirmed by submitting the exact MPN through the Request a Quote form on this page. Pricing depends on order quantity, package or reel configuration, current availability, and sourcing conditions. Use the quote form for purchasing decisions and schedule consistency, while the manufacturer product page remains the source for technical specifications and ordering information.
Where can I buy STM32L151C8U6 online?
Use the Request a Quote form on this page to request STM32L151C8U6 with the required quantity, packaging, and delivery destination. The form provides a direct purchasing path tied to the exact manufacturer ordering code and helps clarify current availability, MOQ, lead time, and shipment options. Technical documentation and manufacturer references are linked on this page as well, allowing engineering review and commercial inquiry to be handled together.
What can replace STM32L151C8U6?
The closest documented replacement is STM32L151C8U6A, which retains the 64 KB Flash, 32 MHz Cortex-M3 configuration, and 48-UFQFPN format. Same-footprint STM32L151 family options also include STM32L151C8T6, STM32L151C8T6A, and STM32L151CBT6, but each may change the temperature ordering code, silicon generation, or Flash capacity. Treat all candidates as controlled substitution decisions: confirm pin compatibility, memory, peripherals, qualification, lifecycle status, and firmware support before production use.
Is STM32L151C8U6 the same as STM32L151C8T6?
STM32L151C8U6 and STM32L151C8T6 are closely related STM32L151C8 devices with the same 64 KB core configuration and a common 48-UFQFPN footprint, but their ordering codes can denote different package or temperature details. The exact meaning must be confirmed from the manufacturer ordering-information table for each device. Do not treat the final code letters as interchangeable without checking the package outline, temperature range, tape-and-reel configuration, and product-status definitions.
Does STM32L151C8U6 meet RoHS and REACH requirements?
The STM32L151C8U6 is a lead-free surface-mount microcontroller, but the exact RoHS and REACH declarations should be confirmed in the current manufacturer product documentation and material-compliance records. The manufacturer page is the appropriate source for the current declarations and supporting documentation. Request the latest compliance paperwork through the Request a Quote form when a customer specification requires certificate-level evidence rather than a general device-category statement.

Données de référence d'ingénierie pour STM32L151C8U6 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose STM32L151C8U6 when the design needs an ultra-low-power 32 MHz Cortex-M3 controller with 64 KB of Flash, integrated USB, an RTC, and low-power 12-bit conversion in a compact 48-UFQFPN footprint. Select STM32L151C8U6A when a newer same-capacity family member is preferred and its device-specific revision, qualification, and lifecycle details meet the project requirements. STM32L151C8T6 and STM32L151C8T6A are useful same-footprint alternatives when the ordering-code differences align with the required temperature, packaging, or qualification conditions. Consider STM32L151CBT6 when the same MCU family and footprint must support 128 KB of Flash for a larger application, bootloader, or diagnostics partition; changing Flash capacity can affect firmware organization and update design. Evaluate STM32L152C8U6 when the STM32L152 family provides a required peripheral advantage, but do not substitute it without reviewing family-specific features and firmware configuration. No cross-brand drop-in replacement was established because MCU pin, clock, peripheral, bootloader, and firmware compatibility are more restrictive than package similarity alone.

Comparaison avec les alternatives

Paramètre Ce produit STM32L151C8U6A STM32L151C8T6 STM32L151C8T6A STM32L151CBT6 STM32L152C8U6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm)
CPU Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 128 KB 64 KB
USB Connectivity Yes Yes Yes Yes Yes Yes
RTC Yes Yes Yes Yes Yes Yes

Principaux différenciateurs

  • Combines USB and low-power analog control in one MCU (vs STM32L151CBT6)
  • Direct same-footprint modernization path (vs STM32L151C8T6)
  • Same package family with larger embedded memory option (vs STM32L151C8U6)

Notes de conception

Use the manufacturer STM32L151/152 package drawing for the 48-UFQFPN land pattern, including its exposed thermal pad. Place the required supply capacitors adjacent to their corresponding power pins and keep the exposed-pad solder process consistent with the manufacturer's assembly recommendations. Preserve access to the pad during inspection because incomplete void control or insufficient solder can affect thermal performance and electrical continuity.

Route USB differential pairs as a short, continuous pair with closely matched geometry, continuous reference-plane support, and minimal vias or stubs. Keep crystal and precision analog paths away from the USB pair and switching-node areas. Follow the manufacturer reference schematic for oscillator, reset, and decoupling connections rather than improvising values, since incorrect oscillator loading or long supply loops can create intermittent clock and communication failures.

Calculate average power from the actual clock, GPIO loading, active-mode duration, and sleep-mode period rather than the 32 MHz maximum frequency alone. For a duty-cycled sensor node, the sleep current and wake-up behavior may dominate energy use. Validate the regulator's startup behavior, USB suspend requirements, and analog-reference stability across every operating mode before finalizing the power architecture.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Yes
Sans halogène
Unknown
Minerais de conflit
Unknown

The device is a lead-free surface-mount MCU. Exact RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from current STMicroelectronics compliance documentation. AEC-Q100 is not assumed from the commercial ordering code.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

STM32L151C8U6 datasheet STM32L151C8U6 pinout STM32L151C8U6 datasheet pdf STM32L151C8U6 equivalent STM32L151C8U6 replacement STM32L151C8U6 footprint STM32L151C8U6 price STM32L151C8U6 stock STM32L151C8U6 vs STM32L151C8U6A STM32L151C8U6 48 UFQFPN STM32L151C8U6 USB sensor application STMicroelectronics STM32L151C8U6

Composants & termes associés

STMicroelectronics STM32L151C8U6 STM32L151C8U6A STM32L151C8T6 STM32L151C8T6A STM32L151CBT6 STM32L152C8U6 Arm Cortex-M3 STM32L1 STM32L151 STM32L152 microcontroller embedded controller ultra-low-power MCU semiconductor USB device RTC 12-bit ADC operational amplifier comparator LCD driver 64 KB Flash 10 KB SRAM 48-UFQFPN surface-mount package
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ