STM32L151C8U6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics
부품 번호: STM32L151C8U6 ✗ 단종STM32L151C8U6 개요
A microcontroller is a compact embedded-computing IC that integrates a processor core, Flash program memory, RAM, peripherals, and communication interfaces on one semiconductor device. The STM32L151 belongs to the STM32L1 ultra-low-power MCU family, where the hierarchy extends from Arm Cortex-M microcontroller to embedded processor, embedded controller, and semiconductor. This positioning makes it suitable for compact, battery-operated, or energy-conscious systems that require more processing capability than a basic 8-bit controller.
The STM32L151C8U6 provides 64 KB of Flash organized as 64K x 8, 10 KB of SRAM, and a maximum CPU frequency of 32 MHz. Its STM32L1 feature set includes USB connectivity, an RTC with low-power timekeeping capability, LCD drive support, an ultra-low-power 12-bit ADC, comparators, and operational amplifiers. These integrated resources can reduce external component count in sensing, logging, control, and USB-connected embedded products.
The manufacturer describes the STM32L151x6/8/B family as ultra-low-power and suitable for both consumer and industrial embedded systems. The Cortex-M3 architecture supports efficient event-driven firmware, while the large set of timers, serial interfaces, and general-purpose I/O enables motor monitoring, sensor acquisition, communications, and local control without requiring a separate processor.
Typical uses include compact USB data loggers, industrial sensor nodes, low-power environmental monitors, building-automation controllers, portable measurement equipment, and small motor-control systems. The integrated USB interface is especially useful when a product must exchange configuration or logged data with a host computer while maintaining a low component count.
PCB implementation requires careful treatment of the exposed thermal pad, supply decoupling, clock stability, and exposed-pad soldering. Follow the STM32L151/152 datasheet pin definition and recommended land pattern when assigning tracks, and use the manufacturer's recommended decoupling network close to the supply pins. Confirm oscillator, reset, boot, and unused-pin requirements before releasing the PCB.
This product page combines manufacturer specifications, family-level alternatives, package information, and design guidance to support component selection and PCB planning. It also distinguishes genuine same-footprint replacements from related devices that require different packages or different memory configurations.
드롭인 대체품: STM32L151C8U6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32L151C8U6 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, SRAM, Product Type, ADC.
STM32L151C8U6A
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L151C8T6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32L151C8T6A
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L151CBT6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L152C8U6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32L151C8U6 최대 정격 & 전기적 특성
| Product Type | Ultra-low-power 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 10 KB |
| CPU Architecture | Arm Cortex-M3 |
| Instruction Width | 32 bit |
| Operating Voltage | 3 V |
| 패키지 | 48-UFQFPN, 7 x 7 mm |
| 실장 유형 | Surface mount |
| Package Pin Count | 48 pins |
| Exposed Pad | Present |
| USB Connectivity | USB device connectivity |
| ADC | Ultra-low-power 12-bit ADC |
| Analog Peripherals | Operational amplifier and comparator |
| Real-Time Clock | RTC with low-power timekeeping |
| LCD Support | LCD driver support |
STM32L151C8U6 48 pins 핀 구성 가이드
STM32L151C8U6(48 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32L151C8U6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32L151C8U6 적합 용도: 6 애플리케이션s: USB-connected environmental sensor node, Industrial data logger, Battery-powered building sensor, Compact USB control and configuration interface, Low-power instrumentation controller, Small motor and actuator monitor.
USB-connected environmental sensor node
STM32L151C8U6 fits a compact environmental sensor node because its 32 MHz Cortex-M3 core can process sensor readings while the integrated USB connectivity avoids a separate USB interface controller. The ultra-low-power 12-bit ADC supports analog sensor acquisition, while 64 KB of Flash and 10 KB of SRAM provide space for conversion routines, filtering, calibration, and USB data handling. The device is placed between the sensor outputs and a USB connector, with the firmware controlling conversion timing, threshold evaluation, and data transfer. Its low-power STM32L1 positioning is valuable for periodically active nodes, although average current must be calculated from the real sampling and communication duty cycle.
추천
Industrial data logger
STM32L151C8U6 supports an industrial data logger that must combine local control, event timestamping, and host connectivity in a compact board. The 32 MHz Cortex-M3 processor can supervise multiple sensors, format records, and manage logging intervals, while the RTC provides timekeeping for timestamped events. USB connectivity allows a notebook or service computer to retrieve stored data without adding a separate USB transceiver or communications processor. With 64 KB of Flash and 10 KB of RAM, the MCU is best suited to moderate data volumes and targeted firmware; larger image buffers or extensive logs favor the 128 KB STM32L151CBT6 option after confirming the same footprint.
추천
Battery-powered building sensor
STM32L151C8U6 is suitable for a battery-powered building sensor where the MCU must wake periodically, acquire a reading, evaluate a threshold, and return to a low-power state. Its Arm Cortex-M3 processing capability supports more sophisticated local filtering than a basic 8-bit controller, while the integrated RTC, comparator, and low-power 12-bit ADC reduce the need for discrete supporting components. The device can supervise occupancy, temperature, or environmental sensors and preserve event timestamps in Flash. Duty-cycle planning and selection of the correct low-power mode are critical because average battery life depends more on wake frequency and peripheral behavior than on the 32 MHz maximum CPU frequency.
추천
Compact USB control and configuration interface
STM32L151C8U6 can act as the embedded controller for a compact USB configuration interface connected to sensors, relays, or a local display. Its integrated USB device connectivity and 32 MHz Cortex-M3 core handle enumeration, command parsing, device control, and status reporting in one component. The LCD drive capability and analog peripherals allow the same MCU to support a local human interface and threshold control, reducing board area and firmware coordination across multiple devices. Pin assignment should prioritize USB, power, clock, reset, and exposed-pad requirements, while the manufacturer reference circuit should guide decoupling and USB signal routing.
추천
Low-power instrumentation controller
STM32L151C8U6 is appropriate for portable instrumentation that combines analog measurement, local processing, and digital connectivity. The ultra-low-power 12-bit ADC performs measurements, the operational amplifier and comparator support conditioning and threshold detection, and the Cortex-M3 core can calibrate readings and prepare data for transfer. USB connectivity offers a convenient configuration and data path during bench use or service. The 10 KB of SRAM is suitable for modest sample buffers and control state, but designs requiring long acquisition windows should evaluate the 128 KB STM32L151CBT6 and confirm whether the extra Flash affects the application's operating strategy.
추천
Small motor and actuator monitor
STM32L151C8U6 can monitor a small motor or actuator system where position sensing, current or temperature evaluation, fault handling, and diagnostic reporting are required. The timers and GPIO resources support periodic sensing and control tasks, while the comparators and 12-bit ADC can evaluate analogue feedback signals. The RTC allows operating events to be timestamped, and USB connectivity simplifies service diagnostics without requiring a separate communications controller. The MCU is appropriate for supervisory rather than high-power motor drive functions; external power transistors remain necessary for load switching, and the exact timer outputs and ADC channels must be assigned against the package pin table.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L151C8U6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L151C8U6A | STM32L151C8T6 | STM32L151C8T6A | STM32L151CBT6 | STM32L152C8U6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 64 KB |
| USB Connectivity | Yes | Yes | Yes | Yes | Yes | Yes |
| RTC | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Combines USB and low-power analog control in one MCU (vs STM32L151CBT6)
- Direct same-footprint modernization path (vs STM32L151C8T6)
- Same package family with larger embedded memory option (vs STM32L151C8U6)
설계 노트
Use the manufacturer STM32L151/152 package drawing for the 48-UFQFPN land pattern, including its exposed thermal pad. Place the required supply capacitors adjacent to their corresponding power pins and keep the exposed-pad solder process consistent with the manufacturer's assembly recommendations. Preserve access to the pad during inspection because incomplete void control or insufficient solder can affect thermal performance and electrical continuity.
Route USB differential pairs as a short, continuous pair with closely matched geometry, continuous reference-plane support, and minimal vias or stubs. Keep crystal and precision analog paths away from the USB pair and switching-node areas. Follow the manufacturer reference schematic for oscillator, reset, and decoupling connections rather than improvising values, since incorrect oscillator loading or long supply loops can create intermittent clock and communication failures.
Calculate average power from the actual clock, GPIO loading, active-mode duration, and sleep-mode period rather than the 32 MHz maximum frequency alone. For a duty-cycled sensor node, the sleep current and wake-up behavior may dominate energy use. Validate the regulator's startup behavior, USB suspend requirements, and analog-reference stability across every operating mode before finalizing the power architecture.
규정 준수 정보
The device is a lead-free surface-mount MCU. Exact RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from current STMicroelectronics compliance documentation. AEC-Q100 is not assumed from the commercial ordering code.