Texas Instruments

TLV2462IP - Dual 6.4MHz RRIO Op Amp | Texas Instruments

Référence : TLV2462IP ✓ Actif
6 V Vdss 80 mA Id 8-pin PDIP Package
MOQ : 1 |

TLV2462IP Présentation

Texas Instruments TLV2462IP is a dual, low-power, rail-to-rail input/output operational amplifier with a 6 V maximum supply and 6.4 MHz gain-bandwidth product. The device is offered in an 8-pin PDIP package and combines two amplifier channels for signal conditioning, buffering, filtering, analog measurement, current sensing, and precision control. Its rail-to-rail input and output characteristics support signal operation near the supply limits, while the extended input common-mode range increases usable dynamic range in low-voltage systems.

An operational amplifier is a voltage-gain building block used to amplify weak sensor signals, buffer inputs and outputs, implement active filters, compare voltages, and drive analog stages. Within the power-management and signal-chain hierarchy, the TLV2462IP belongs to the operational-amplifier family, combines a rail-to-rail input stage with a rail-to-rail output stage, and provides two independent channels in one package. A dual amplifier can reduce board area when two related analog functions require similar supply and bandwidth characteristics.

The principal operating characteristics are a 6 V maximum supply, 6.4 MHz typical gain-bandwidth product, and rail-to-rail input/output operation. The manufacturer describes the TLV2462 family as a low-power family intended for portable applications. Its input common-mode range extends beyond the supply rails, which can improve signal-headroom utilization in low-voltage designs. The PDIP package also supports conventional through-hole assembly, prototyping, repair, and applications where a surface-mount package is not required.

Two channels give designers flexibility to implement differential sensing, signal filtering, level conversion, active gain stages, or paired analog channels. The 6.4 MHz bandwidth provides useful response for low- and mid-frequency instrumentation, industrial control, portable measurement, and sensor-conditioning circuits. Because the device operates from a maximum total supply of 6 V, it is particularly relevant to 3.3 V and 5 V systems, although exact common-mode, output-swing, and stability behavior must be checked against the operating conditions in the manufacturer datasheet.

Typical uses include current-sense amplifier front ends, buffered sensor channels, low-frequency active filters, portable measurement equipment, analog control loops, and dual-channel signal conditioning. The extended input range is particularly useful when signals approach either supply rail, while the low-power family positioning supports battery-powered and portable systems. Independent dual channels can also implement matched gain stages when component matching is adequate for the required precision.

A practical design should verify input common-mode limits, output swing, capacitive-load stability, noise, offset, and supply-current behavior for the intended signal amplitude and frequency. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be biased so they remain in their valid operating region. The 8-pin PDIP footprint should also be checked against the PCB drill pattern before assembly.

This page organizes the TLV2462IP operating characteristics, sourcing information, practical applications, and package guidance into an engineering-focused reference. It also identifies qualified same-brand alternatives and highlights the trade-offs involved when replacing an existing dual rail-to-rail amplifier.

Alternatives de remplacement direct pour TLV2462IP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec TLV2462IP (même facteur de forme et même empreinte) — différant par Mounting Type, Amplifier Type, Maximum Supply Voltage, Package, Rail-to-Rail Input.

Texas Instruments
Mounting Type: Surface Mount
Amplifier Type: Operational Amplifier
Maximum Supply Voltage: 6 V
Comparer avec TLV2462IP →
Texas Instruments
Mounting Type: Through hole
Amplifier Type: Single CMOS operational amplifier
Maximum Supply Voltage: 5.5 V
Comparer avec TLV2462IP →

TLV2462AIP

✅ Remplacement direct
📦 8-pin PDIP
Same dual rail-to-rail architecture and 8-PDIP footprint; documented headline differences are 0% in package form factor, with grade-specific electrical limits requiring review.

📋 Alternative de référence (hors catalogue)

TLV2462CP

✅ Remplacement direct
Texas Instruments
📦 8-pin PDIP
Dual operational amplifier · 2 channels · 6 V · 6.4 MHz · Rail-to-rail · Rail-to-rail · 500 µA/channel · 80 mA

Contactez-nous pour le prix

Voir la fiche technique →

TLV2462CPE4

✅ Remplacement direct
📦 8-pin PDIP
Same TLV2462-family dual rail-to-rail configuration in PDIP form; package dimensions are unchanged, with grade-specific electrical tolerances requiring review.

📋 Alternative de référence (hors catalogue)

TLV2462IP Valeurs maximales et caractéristiques électriques

Number of Amplifier Channels 2 channels
Maximum Total Supply Voltage 6 V
Typical Gain-Bandwidth Product 6.4 MHz
Rail-to-Rail Input Rail-to-rail
Rail-to-Rail Output Rail-to-rail
Input Common-Mode Range Extends beyond the supply rails
Output Current 80 mA
Minimum Total Supply Voltage 2.7 V
Maximum Total Supply Voltage (Cross-Reference Data) 6 V
Plage de température de fonctionnement -40 °C to +125 °C
Package Type 8-pin PDIP
Nombre de broches 8 pins
Type de montage Through-hole
Product Family TLV246x low-power rail-to-rail input/output operational amplifier family
Primary Application Portable low-voltage signal conditioning
Statut RoHS RoHS compliant

Guide de configuration des broches du TLV2462IP 8-pin pdip

Configuration des broches du TLV2462IP (boîtier 8-pin pdip). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-pin pdip pour le TLV2462IP

Aucune donnée de brochage détaillée disponible pour TLV2462IP.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TLV2462IP convient pour 6 applications: Current-Sense Signal Conditioning, Portable Sensor Signal Conditioning, Active Filtering and Buffering, Industrial Process-Control Loops, Low-Voltage Audio and Communication Interfaces, Precision Control and Measurement.

⚡

Current-Sense Signal Conditioning

The TLV2462IP fits a current-measurement front end when the shunt voltage must be amplified before conversion by an ADC or controller. Its two rail-to-rail amplifier channels can support gain and filtering functions within one package, while the 6.4 MHz gain-bandwidth product provides useful bandwidth for many low- and mid-frequency current-control loops. The rail-to-rail output is valuable near supply limits, but the common-mode voltage of the shunt signal must remain within the amplifier's operating range. Gain resistor ratios should preserve output headroom, and filtering should be set below the bandwidth required for the measured current.

📱

Portable Sensor Signal Conditioning

The TLV2462IP is suitable for battery-powered sensing because the manufacturer positions the TLV2462 family as a low-power amplifier family for portable applications. Two channels can amplify or buffer two related sensor outputs without requiring separate packages, and the input common-mode range extending beyond the supply rails improves signal headroom in compact 3.3 V or 5 V systems. The design should verify input bias current, offset, noise, and quiescent current against the sensor impedance and available battery energy. Bypass capacitors and input biasing are especially important when preserving weak sensor signals.

🔧

Active Filtering and Buffering

The TLV2462IP can implement active filters or buffer high-impedance sources because it provides two rail-to-rail channels with a 6.4 MHz gain-bandwidth product. One channel may perform amplification while the other buffers an ADC input or reference node, reducing component count on a mixed analog board. The 6 V maximum supply supports low-voltage operation, and the extended input range can preserve signal excursion near a supply rail. Component tolerances and the amplifier's gain-bandwidth and noise characteristics must be included when calculating filter response, and stability should be checked for the intended capacitive load.

🏭

Industrial Process-Control Loops

The TLV2462IP is applicable to low-voltage industrial control circuitry that must amplify sensor signals and drive an analog control input. Its dual-channel configuration can process a feedback signal and a reference or monitor signal, while rail-to-rail input and output behavior provides useful range in compact control boards. The 6.4 MHz bandwidth is more than adequate for many slow process loops but does not remove the need for loop compensation. Designers should verify output swing, offset, noise, and supply behavior over the full process temperature range, and use stable reference networks to avoid control drift.

🎧

Low-Voltage Audio and Communication Interfaces

The TLV2462IP can serve as a general-purpose dual amplifier in low-voltage audio or communication interface blocks where the signal remains within the amplifier's common-mode and output limits. Rail-to-rail input and output stages are useful for compact systems whose signals approach the supply rails, and the 6.4 MHz gain-bandwidth product covers a broad range of audio and control-frequency tasks. The 8-pin PDIP package is useful in prototypes and legacy through-hole assemblies. Audio designs should still examine output distortion, slew rate, noise, and capacitive-load stability rather than assuming the headline bandwidth alone determines fidelity.

🖥️

Precision Control and Measurement

The TLV2462IP is suitable for precision measurement and control blocks that require two amplifier channels, rail-to-rail signal handling, and operation from a supply no higher than 6 V. It can provide differential input amplification, offsetting, or level shifting before an ADC, particularly where available board area is constrained. Its input common-mode range extending beyond the rails helps preserve dynamic range in low-voltage systems. Precision performance must be assessed from the exact offset, bias-current, drift, noise, and open-loop-gain limits; those characteristics should be checked against the required error budget before production release.

What are the key specifications of TLV2462IP that engineers should know?
The TLV2462IP is a dual operational amplifier with a 6 V maximum total supply, 6.4 MHz typical gain-bandwidth product, and rail-to-rail input/output operation in an 8-pin PDIP package. According to the Texas Instruments TLV2462 product page, its input common-mode range extends beyond the supply rails, while cross-reference information identifies an operating range of -40 °C to +125 °C. It is intended for portable, low-voltage signal-conditioning applications using two amplifier channels.
What is the operating voltage of TLV2462IP?
The TLV2462IP operates with a maximum total supply voltage of 6 V. Texas Instruments identifies the device as a 6 V, dual rail-to-rail input/output operational amplifier, and comparison data lists a minimum total supply of 2.7 V. These figures make the part applicable to common 3.3 V and 5 V systems, subject to checking the input and output signal limits in the manufacturer datasheet.
Where can I download the TLV2462IP datasheet PDF?
The official TLV2462 datasheet and product information are available from the Texas Instruments TLV2462 product page at https://www.ti.com/product/TLV2462. The exact TLV2462IP ordering entry is identified as a dual, 6 V, 6.4 MHz, rail-to-rail input/output amplifier in an 8-pin PDIP package. Use the manufacturer document for the complete pin descriptions, electrical limits, and recommended operating conditions.
Where is the TLV2462IP pinout located?
The TLV2462IP pinout and pin descriptions are located in the manufacturer datasheet linked from the official TLV2462 product page. The exact device uses an 8-pin PDIP package with two operational-amplifier channels. Use the pin-description table when assigning power, input, output, and supply pins, and confirm the counter-clockwise numbering against the PCB footprint before fabrication.
Is TLV2462IP the same as TLV2462AIP?
The TLV2462IP and TLV2462AIP are both listed as 8-PDIP, dual, general-purpose rail-to-rail operational amplifiers from Texas Instruments. The TLV2462AIP is an ordering variant within the same product family and is therefore a strong same-brand replacement candidate when its electrical limits and grade requirements satisfy the design. Review the manufacturer ordering table and datasheet before making a production substitution.
What is the best drop-in replacement for TLV2462IP?
TLV2462AIP is the closest documented same-brand drop-in candidate because it is explicitly listed as a dual, 8-PDIP TLV2462-family amplifier. TLV2462CP and TLV2462CPE4 are additional PDIP package options identified in cross-reference information, but their exact electrical tolerances and grade-specific limits must be checked. No cross-brand part with verified pin compatibility and an 8-PDIP footprint was identified, so an unqualified substitution is not recommended.
Can TLV2462CP replace TLV2462IP?
TLV2462CP can be considered for replacement when its 8-PDIP pinout and electrical limits match the application requirements. Cross-reference information identifies TLV2462CP as part of the same TLV246x low-power rail-to-rail input/output amplifier family and directly compares it with TLV2462IP. The final choice should account for grade, temperature range, offset, noise, stability, and supply requirements rather than package shape alone.
When should I choose TLV2462IP over TLV2462CP?
Choose TLV2462IP when its specified electrical characteristics, temperature grade, and sourcing requirements are already validated for the design. Choose TLV2462CP when it provides a suitable lifecycle or availability advantage and its manufacturer-defined limits remain acceptable. Both appear in the same TLV246x family with rail-to-rail input/output characteristics, so the decisive factors are the exact ordering-table ratings rather than application type alone.
Is TLV2462IP suitable for low-voltage sensor conditioning?
The TLV2462IP is suitable for many low-voltage sensor-conditioning applications because its input common-mode range extends beyond the supply rails and its output is rail-to-rail. A 6.4 MHz gain-bandwidth product is adequate for many low- and mid-frequency measurement paths. The sensor signal must remain within the amplifier's stated input limits, and filtering and gain must be selected to preserve the required bandwidth and noise performance.
What is TLV2462IP used for in current sensing?
The TLV2462IP can provide gain and buffering in a current-sense signal path because it contains two rail-to-rail operational-amplifier channels. A typical arrangement scales the voltage across a shunt and feeds that signal to an ADC or controller. The shunt voltage, common-mode level, gain, output range, and required conversion bandwidth must all be evaluated before the amplifier configuration is finalized.
What is the lead time for TLV2462IP?
The current lead time for TLV2462IP should be requested through the Request a Quote form on this page. Manufacturer and distributor catalog records confirm the device as an active Texas Instruments product, but a fixed production lead time must not be inferred from a general listing. Providing the required quantity, package, and target date will allow an accurate purchasing response.
Is TLV2462IP in stock?
Current TLV2462IP inventory should be confirmed through the Request a Quote form on this page. The verified listings show the part at multiple suppliers, but catalog presence does not guarantee stock at the requested quantity or delivery date. Submit the required order quantity and destination so the latest availability can be matched to the actual procurement need.
Where can I buy TLV2462IP online?
Use the Request a Quote form on this page to purchase TLV2462IP and request current price, stock, and lead time. The verified manufacturer page identifies TLV2462IP as an 8-pin PDIP ordering option within the TLV2462 family. Submitting the exact MPN helps avoid confusion with similarly named TLV2462 variants, packages, or automotive-grade order codes.
What is the price of TLV2462IP?
The current TLV2462IP price is best requested through the Request a Quote form on this page because commercial pricing and inventory can change with order quantity and market conditions. The structured listing information on this page preserves current price evidence when available, while the Request a Quote form provides a direct response for the required quantity, package, and delivery destination.
Does the TLV2462IP have a shutdown function?
The accessible TLV2462 family description identifies a family of low-power rail-to-rail input/output operational amplifiers with shutdown capability, while the exact ordering suffix determines the device configuration. Before designing around shutdown, confirm that TLV2462IP itself exposes the shutdown function and verify its logic level and operating sequence in the manufacturer pin description and electrical tables. Do not infer shutdown control from the broader family description alone.

Données de référence d'ingénierie pour TLV2462IP — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the TLV2462IP when the design needs a dual, low-power operational amplifier with a 6 V maximum supply, 6.4 MHz typical gain-bandwidth product, rail-to-rail input/output behavior, and an 8-pin PDIP footprint. Choose TLV2462AIP when its specific grade ratings and availability provide a better fit for an existing board, but confirm the complete electrical limits before substitution. Consider TLV2462CP or TLV2462CPE4 when their ordering-grade characteristics meet the accuracy, temperature, and lifecycle requirements. No verified cross-brand 8-PDIP equivalent was established, so changing manufacturers should not be attempted without a separate pinout and parametric review. For every choice, validate common-mode range, output swing, noise, offset, stability, and the exact operating temperature range.

Comparaison avec les alternatives

Paramètre Ce produit TLV2462AIP TLV2462CP TLV2462CPE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Amplifier Channels 2 channels 2 channels 2 channels 2 channels
Rail-to-Rail Input and Output Input and output rail-to-rail Input and output rail-to-rail Input and output rail-to-rail Input and output rail-to-rail
Special Feature Low-power family with extended input common-mode range TLV2462-family general-purpose amplifier TLV246x low-power rail-to-rail family TLV246x low-power rail-to-rail family

Principaux différenciateurs

  • Two rail-to-rail amplifier channels in one package (vs TLV2462CP)
  • Documented 6.4 MHz gain-bandwidth product (vs TLV2462AIP)
  • Exact 8-pin PDIP package with extended-range input (vs TLV2462CPE4)

Notes de conception

Place the supply-bypass capacitor directly between each supply pin and ground, with the ground return kept short to reduce supply impedance. Because the TLV2462IP supports a maximum total supply of 6 V, verify the complete circuit including transient margin before applying a 5 V rail. Check quiescent current and output-current demand against the system's power budget; both values must be taken from the exact ordering variant rather than inferred from the 6.4 MHz bandwidth.

Do not assume that rail-to-rail input operation permits arbitrary input voltages. Confirm the exact common-mode limits, output swing, and supply range for the selected grade in the manufacturer datasheet. Likewise, route unused amplifier inputs to a defined bias point so they remain in a valid common-mode region. These checks are especially important when the input approaches 0 V or the maximum 6 V total supply.

Use the manufacturer's 8-pin PDIP footprint and preserve the standard through-hole drill pattern. Keep the two channels' feedback components close to their corresponding amplifier pins to minimize parasitic coupling and feedback-loop delay. For high-frequency filtering or capacitive ADC drives, establish the intended load, include output isolation where appropriate, and verify stability against the actual PCB capacitance before production.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is identified in the TLV2462 comparison information. The exact TLV2462IP grade-specific REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the manufacturer product documentation.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

tlv2462 datasheet TLV2462IP datasheet TLV2462IP pinout TLV2462IP datasheet pdf TLV2462IP 8-PDIP TLV2462IP 6.4MHz TLV2462IP rail-to-rail TLV2462IP equivalent TLV2462IP replacement TLV2462IP vs TLV2462AIP TLV2462IP price TLV2462IP stock Texas Instruments TLV2462IP TLV2462IP current sensing TLV2462IP footprint

Composants & termes associés

Texas Instruments TLV2462IP TLV2462AIP TLV2462CP TLV2462CPE4 TLV2462 operational amplifier dual amplifier rail-to-rail input rail-to-rail output low-power amplifier signal conditioning buffer amplifier active filter current sensing precision control analog measurement gain-bandwidth product 6.4 MHz 6 V 2.7 V PDIP-8 through-hole package RoHS portable applications
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ