TPS62150A-Q1 - 3-17V 1A Automotive Step-Down Converter | TI
Référence : TPS62150A-Q1 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.56 | $25,60 |
| 100 | $2.28 | $228,00 |
| 500 | $2.05 | $1 025,00 |
| 1 000 | $1.85 | $1 850,00 |
TPS62150A-Q1 Présentation
A step-down converter, also known as a buck converter, is a type of DC-DC converter that efficiently reduces a higher input voltage to a lower output voltage. It is a fundamental building block in power management systems, converting raw battery or bus voltages to the precise levels required by microcontrollers, sensors, and other loads. The TPS62150A-Q1 belongs to the family of synchronous buck converters, which use both high-side and low-side switches to achieve high efficiency, especially at moderate to high load currents.
Key features of the TPS62150A-Q1 include the DCS-Control™ topology, which provides fast transient response and high output voltage accuracy. The device supports a typical switching frequency of 2.5 MHz, allowing the use of small inductors and capacitors, reducing solution size. It also features a quiescent current of 17 µA (typ.), enabling high efficiency at light loads. The output voltage can be set via external resistors or selected via a pin for nominal or +5% output, and the device includes programmable soft start and tracking for controlled power-up sequencing.
Technically, the TPS62150A-Q1 integrates both power MOSFETs, eliminating the need for external Schottky diodes. The DCS-Control topology combines voltage mode and current mode control, providing stable operation with ceramic output capacitors. The device also includes power-save mode for seamless transition between PWM and PFM operation, maintaining high efficiency across the load range. The automotive qualification (AEC-Q100) ensures reliable operation over the -40°C to 125°C temperature range, making it suitable for harsh environments.
Typical applications include automotive infotainment systems, advanced driver-assistance systems (ADAS), and industrial power supplies. The wide input range and high switching frequency make it ideal for powering processors, FPGAs, and sensors in these systems. The small package and high efficiency help meet stringent thermal and space requirements.
When designing with the TPS62150A-Q1, ensure proper input and output capacitor selection to maintain stability and low output ripple. The device is designed to work with ceramic capacitors, but the value and ESR must be within the recommended range. Also, consider the thermal performance of the QFN package and provide adequate copper area for heat dissipation.
Alternatives de remplacement direct pour TPS62150A-Q1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TPS62150A-Q1 (même facteur de forme et même empreinte) — différant par Output Voltage Range, Package, Switching Frequency, Topology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
TPS62150A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPS62152-Q1
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TPS62160-Q1
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TPS62170-Q1
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TPS62130A
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TPS62150A-Q1 Valeurs maximales et caractéristiques électriques
| Plage de tension d'entrée | 3 V to 17 V |
| Output Current | 1 A |
| Plage de tension de sortie | 0.9 V to 6 V |
| Fréquence de commutation | 2.5 MHz (typical) |
| Courant de repos | 17 µA (typical) |
| Topologie | Synchronous Step-Down (Buck) |
| Control Method | DCS-Control™ |
| Boîtier | 16-VQFN (3 mm × 3 mm) |
| Plage de température de fonctionnement | -40°C to 125°C |
| Automotive Qualification | AEC-Q100 |
| Démarrage progressif | Programmable |
| Power-Save Mode | Yes |
| Output Voltage Accuracy | ±1% (typical) |
| RoHS | Compliant |
| Type de montage | Surface Mount |
Configuration des broches de TPS62150A-Q1
| Broche 1 | VIN — Input supply voltage |
| Broche 2 | VIN — Input supply voltage |
| Broche 3 | EN — Enable pin (active high) |
| Broche 4 | SS/TR — Soft-start/tracking pin |
| Broche 5 | VOS — Output voltage sense |
| Broche 6 | FB — Feedback pin |
| Broche 7 | GND — Ground |
| Broche 8 | GND — Ground |
| Broche 9 | SW — Switch node |
| Broche 10 | SW — Switch node |
| Broche 11 | PG — Power good output |
| Broche 12 | VOUT — Output voltage |
| Broche 13 | VOUT — Output voltage |
| Broche 14 | GND — Ground |
| Broche 15 | GND — Ground |
| Broche 16 | GND — Ground (exposed pad) |
Applications typiques
TPS62150A-Q1 convient pour 6 applications: Automotive Infotainment, ADAS (Advanced Driver-Assistance Systems), Industrial Power Supplies, Portable Battery-Powered Devices, Networking Equipment, Medical Devices.
Automotive Infotainment
The TPS62150A-Q1 provides a compact, efficient power solution for automotive infotainment systems, delivering up to 1A from a 3-17V input. Its 2.5MHz switching frequency allows small external components, saving PCB space. The DCS-Control topology ensures fast transient response for processor and display loads, while the AEC-Q100 qualification guarantees reliability in harsh automotive environments. The wide input range accommodates battery voltage variations during cranking and load dump conditions.
Recommandé
ADAS (Advanced Driver-Assistance Systems)
In ADAS applications, the TPS62150A-Q1 powers sensors, cameras, and radar modules with a clean, stable voltage. Its low quiescent current (17µA) is ideal for always-on systems, and the high switching frequency minimizes solution size. The device's fast transient response ensures stable operation during sudden load changes, such as when a camera module powers up. The AEC-Q100 qualification and wide temperature range make it suitable for under-hood and cabin-mounted electronics.
Recommandé
Industrial Power Supplies
The TPS62150A-Q1 is well-suited for industrial power supplies, providing a regulated output from a wide input range (3-17V). Its high efficiency reduces heat generation, and the small QFN package allows for compact designs. The device can be used to power microcontrollers, sensors, and communication interfaces in factory automation and process control. The programmable soft start helps manage inrush currents, and the power-save mode maintains efficiency at light loads.
Recommandé
Portable Battery-Powered Devices
For portable devices, the TPS62150A-Q1 offers high efficiency across a wide load range, extending battery life. Its low quiescent current (17µA) is crucial for standby operation. The 2.5MHz switching frequency allows the use of tiny inductors and capacitors, making it ideal for space-constrained designs like handheld instruments and wearable devices. The device supports input voltages from 3V to 17V, accommodating various battery chemistries and configurations.
Recommandé
Networking Equipment
In networking equipment, the TPS62150A-Q1 provides a reliable power supply for routers, switches, and small-cell base stations. Its wide input range and high efficiency make it suitable for powering from 12V or 24V buses. The fast transient response ensures stable operation during data bursts, and the small package helps in high-density PCB layouts. The device's DCS-Control topology provides excellent line and load regulation, critical for maintaining signal integrity.
Recommandé
Medical Devices
The TPS62150A-Q1 is suitable for medical devices that require reliable and efficient power conversion. Its wide input range and high accuracy make it ideal for powering sensors, microcontrollers, and communication modules in patient monitors and diagnostic equipment. The device's low noise and fast transient response help maintain signal integrity in sensitive analog circuits. The small package and high efficiency contribute to compact, battery-operated designs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TPS62150A-Q1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TPS62150A | TPS62152-Q1 | TPS62160-Q1 |
|---|---|---|---|---|
| Package | 16-VQFN (3 mm × 3 mm) | 16-VQFN (3 mm × 3 mm) | 16-VQFN (3 mm × 3 mm) | 16-VQFN (3 mm × 3 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 3 V to 17 V | 3 V to 17 V | 3 V to 17 V | 3 V to 17 V |
| Output Current | 1 A | 1 A | 2 A | 1 A |
| Switching Frequency | 2.5 MHz | 2.5 MHz | 2.5 MHz | 1.25 MHz |
| Quiescent Current | 17 µA | 17 µA | 15 µA | 17 µA |
| Automotive Grade | Yes (AEC-Q100) | No | Yes (AEC-Q100) | Yes (AEC-Q100) |
| Output Voltage Range | 0.9 V to 6 V | 0.9 V to 6 V | 0.9 V to 6 V | 0.9 V to 6 V |
Principaux différenciateurs
- Automotive AEC-Q100 qualification (vs TPS62150A)
- Higher switching frequency (2.5 MHz) (vs TPS62160-Q1)
- Lower quiescent current (17 µA) (vs TPS62152-Q1)
Notes de conception
Place the input capacitor (10 µF) and output capacitor (22 µF) as close to the VIN and VOUT pins as possible to minimize parasitic inductance. Use a solid ground plane under the device and connect the exposed pad to the ground plane with multiple vias for optimal thermal performance. The SW node should be kept short and wide to reduce EMI.
The TPS62150A-Q1 in a 3x3 QFN package can dissipate up to 2W at maximum load. Ensure adequate copper area on the PCB (at least 1 square inch) connected to the exposed pad to keep the junction temperature below 125°C. For high ambient temperatures, consider using a thermal via array under the device.
Do not exceed the absolute maximum input voltage of 17V. Ensure the feedback resistor divider uses 1% tolerance resistors to maintain output voltage accuracy. The SS/TR pin can be used for tracking or soft-start; if unused, connect it to VIN through a resistor. Avoid using low-ESR ceramic capacitors without proper ESR compensation, as this can cause instability.
Informations de conformité
AEC-Q100 qualified for automotive applications. RoHS compliant per TI product page.
