AMD

XC7A200T-2SBG484C - 215K Cell Artix-7 FPGA | AMD

Référence : XC7A200T-2SBG484C ✓ Actif
1 V Vdss SBG484, 484-FBGA/FCBGA Package -2 Speed
MOQ : 1 |

XC7A200T-2SBG484C Présentation

The AMD XC7A200T-2SBG484C is an Artix-7 field-programmable gate array with 215,360 logic cells, 16,825 logic blocks, 13,455,360 RAM bits, and 285 I/O sites in a 484-pin FCBGA package. It uses 28 nm process technology and belongs to the -2 speed grade. The SBG484 package supports dense programmable-logic, digital signal processing, embedded-processing, and high-speed I/O designs where the 484-ball footprint provides substantial routing and interface capacity.

An FPGA is a semiconductor whose internal logic, interconnect, and I/O are configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable input/output resources, dedicated processing elements, and clocking resources on one device. The XC7A200T family therefore implements complete digital systems in a single integrated circuit rather than relying on a fixed sequence of processor instructions.

The Artix-7 architecture provides 215,360 programmable logic cells, 16,825 logic blocks, and 13,455,360 RAM bits. These resources support parallel data paths, digital filters, protocol bridges, control logic, and embedded systems. The device also provides 285 I/O sites and dedicated high-performance I/O resources, allowing a board design to combine multiple interfaces without relying on a large collection of external devices.

The XC7A200T-2SBG484C is manufactured on 28 nm technology and is identified with a 1 V core-voltage configuration in the published device listing. Its -2 designation identifies the performance grade. Compared with lower-speed Artix-7 options, the -2 grade favors designs that require greater logic timing margin, although board-level signal integrity, power delivery, and tool constraints still determine whether a design closes timing successfully.

Typical uses include industrial control and automation, embedded vision, communications infrastructure, test equipment, consumer peripherals, and high-throughput digital signal processing. The 215,360-cell fabric is particularly suitable for parallel acquisition systems, protocol conversion, image pre-processing, control-plane logic, and designs that combine MicroBlaze processor logic with dedicated hardware pipelines.

The most important design consideration is package and power planning. The 484-ball FCBGA requires a dense multilayer PCB, careful power-plane segmentation, and constrained escape routing from the device. Configure the power rails, decoupling network, clocking scheme, and I/O standards for the selected board environment, then validate timing and signal integrity with the complete Vivado design flow.

This page combines the exact device identity, package and logic-resource data, drop-in ordering-code comparisons, and practical PCB guidance. It is intended to help engineers confirm that XC7A200T-2SBG484C matches the intended Artix-7 design before investing in board layout, tooling, or procurement.

Alternatives de remplacement direct pour XC7A200T-2SBG484C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec XC7A200T-2SBG484C (même facteur de forme et même empreinte) — différant par Package, Block RAM, Device Type, Logic Cells, Operating Temperature.

AMD
Package: FBGA-484
Block RAM: 13 Mb
Logic Cells: 740K
Comparer avec XC7A200T-2SBG484C →
AMD
Package: 484-BBGA, FCBGA (FBG484)
Operating Temperature: -40°C to +100°C
Comparer avec XC7A200T-2SBG484C →
AMD
Package: 484-FBGA / FCBGA, 484 balls
Block RAM: 13,455,360 RAM bits (13,140 Kb)
Device Type: Artix-7 field-programmable gate array (FPGA)
Comparer avec XC7A200T-2SBG484C →

XC7A200T-2FBG484C

✅ Remplacement direct
AMD
📦 SBG484, 484-FBGA/FCBGA
Artix-7 · 740K · 215K · 13 Mb · 10.3 Mb · 740 · 16 (up to 6.6 Gbps) · 10

✓ En stock

$320 / unité

Voir la fiche technique →

XC7A200T-2FBG484I

✅ Remplacement direct
AMD
📦 SBG484, 484-FBGA/FCBGA
Artix-7 · 215360 · 16825 · 13455360 · 285 · 740 · 16 · 6.6 Gb/s

✓ En stock

$89.15 / unité

Voir la fiche technique →

XC7A200T-2SBG484I

✅ Remplacement direct
AMD
📦 SBG484, 484-FBGA/FCBGA
Artix-7 field-programmable gate array (FPGA) · 215,360 logic cells · 13,455,360 RAM bits (13,140 Kb) · 285 I/O · 16,825 LABs/CLBs · Artix-7 · XC7A200T · -2

Contactez-nous pour le prix

Voir la fiche technique →

XC7A200T-2SBG484E

✅ Remplacement direct
📦 SBG484, 484-FBGA/FCBGA
Same Artix-7 device capacity, -2 speed grade, and 484-ball package; the E ordering suffix changes the associated temperature or extended-temperature classification.

📋 Alternative de référence (hors catalogue)

XC7A200T-2SBG484C Valeurs maximales et caractéristiques électriques

Device Type Artix-7 Field Programmable Gate Array (FPGA)
FPGA Logic Cells 215,360 cells
Logic Blocks 16,825 LABs/CLBs
Embedded RAM 13,455,360 bits
Input/Output Sites 285 I/O
Process Technology 28 nm
Core Supply Voltage 1 V
Speed Grade -2
Boîtier SBG484, 484-FBGA/FCBGA
Package Ball Count 484 balls
Type de montage Surface mount
Programmable Logic Type FPGA
Temperature Grade Commercial
Device Family Artix-7
Product Series 7 Series

Guide de configuration des broches du XC7A200T-2SBG484C 484 balls

Configuration des broches du XC7A200T-2SBG484C (boîtier 484 balls). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 484 balls pour le XC7A200T-2SBG484C

Aucune donnée de brochage détaillée disponible pour XC7A200T-2SBG484C.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XC7A200T-2SBG484C convient pour 6 applications: Industrial Automation and Control, Embedded Vision Preprocessing, Communications Protocol Conversion, Test and Measurement Equipment, High-Throughput Digital Signal Processing, Embedded Processor Platform.

🏭

Industrial Automation and Control

The XC7A200T-2SBG484C fits industrial control systems that combine machine sequencing, safety-adjacent logic, communications, and data acquisition in one programmable device. Its 215,360 logic cells can implement multiple parallel control paths, while 13,455,360 RAM bits support state machines, diagnostics, and protocol buffers. The 285 I/O sites provide flexibility for encoders, discrete controls, field buses, and operator interfaces. Using a single FPGA reduces controller partitioning and keeps timing-critical operations in a single fabric. The principal design constraints are deterministic I/O behavior, industrial temperature requirements, and the need for careful BGA power delivery. A production design should select the appropriate ordering grade, constrain every pin in Vivado, and validate timing with realistic clock and I/O assumptions.

📺

Embedded Vision Preprocessing

The XC7A200T-2SBG484C can serve as a parallel image and video preprocessing engine because its 215,360 logic cells provide substantial parallelism for pixel pipelines and the 13,455,360 RAM bits support line buffers and working storage. The 285 I/O sites help connect cameras or parallel sensors, while programmable logic can implement thresholding, color conversion, filtering, and format conversion before downstream processing. The -2 speed grade favors demanding timing pipelines. Practical implementations should use dedicated clocking resources, constrain video interfaces according to their standards, and check timing at the intended pixel clock. The BGA package also requires careful escape routing and return-path continuity, so signal-integrity simulation should be performed for camera links and any high-speed memory interfaces.

🌐

Communications Protocol Conversion

The XC7A200T-2SBG484C is suitable for bridging dissimilar communication interfaces by combining programmable logic, block memory, and 285 I/O sites in one Artix-7 device. Designers can instantiate parallel datapaths for framing, buffering, clock-domain crossing, CRC generation, and packet adaptation without relying on a fixed processor architecture. The 13,455,360 RAM bits provide storage for transmit and receive queues, while the 215,360-cell fabric supports multiple protocol channels in parallel. The -2 grade is useful for demanding interface timing, but implementation success still depends on clocking, I/O standards, and board-level signal integrity. Use the package-specific constraints for every high-speed interface and verify timing after placing external transceivers, isolation components, and impedance-controlled board structures.

🔧

Test and Measurement Equipment

The XC7A200T-2SBG484C can implement parallel acquisition, pattern generation, real-time analysis, and instrument control within a compact FPGA subsystem. Its 215,360 logic cells support configurable test engines and timing checks, while 13,455,360 RAM bits accommodate sample buffers and correlation or histogram functions. The 285 I/O sites allow direct connection to converters, memory devices, triggers, and synchronization inputs. In a measurement instrument, clock jitter, input thresholding, calibration paths, and deterministic latency often determine performance more than raw logic count. Engineers should use dedicated clocking resources, define acquisition windows in constraints, and verify high-speed input timing against the selected I/O standard. A multilayer PCB is needed to route the dense FCBGA package while maintaining controlled impedance and adequate power integrity.

⚡

High-Throughput Digital Signal Processing

The XC7A200T-2SBG484C is appropriate for fixed-function digital filters, FFT-like parallel pipelines, modulation, error correction, and real-time waveform processing. Its 215,360 programmable cells can execute multiple lanes concurrently, and the 13,455,360 RAM bits support coefficient storage, circular buffers, and overlap-save or overlap-add techniques. The 285 I/O sites provide parallel data connections to external converters and memory. The -2 speed grade increases timing margin compared with lower-speed options, while the 28 nm Artix-7 implementation combines substantial logic capacity with lower system complexity than a network of discrete ASICs and FPGA components. Engineers should map DSP operations to the appropriate pipeline structure, apply registered I/O where required, and validate arithmetic throughput, latency, and resource utilization through synthesis and implementation.

🖥️

Embedded Processor Platform

The XC7A200T-2SBG484C can combine a soft processor with application-specific hardware when a design needs flexible control logic and parallel acceleration. The 215,360 logic cells and 13,455,360 RAM bits provide enough resources for an embedded processor, peripherals, data movement, and dedicated processing pipelines, while 285 I/O sites support external memories and communications. This architecture is useful for boot control, network management, sensor aggregation, and custom accelerators. The key engineering task is partitioning the design so latency-critical operations remain in hardware while general-purpose code handles configuration and control. Memory interfaces require careful bank sizing and timing constraints, and the FCBGA footprint demands controlled impedance and sufficient power planes. Use Vivado synthesis and implementation reports to confirm processor resources, memory bandwidth, and timing before PCB release.

What is the AMD XC7A200T-2SBG484C?
The AMD XC7A200T-2SBG484C is an Artix-7 FPGA with 215,360 logic cells, 13,455,360 RAM bits, and 285 I/O sites in a 484-ball FCBGA package. According to the AMD Artix-7 data sheet, it is built on 28 nm process technology and belongs to the -2 speed grade. It is intended for designs requiring substantial parallel logic, on-chip memory, programmable I/O, and moderate-to-high interface density.
Where can I download the XC7A200T-2SBG484C datasheet PDF?
The XC7A200T datasheet PDF is available through the AMD/Xilinx Artix-7 documentation and the linked manufacturer-hosted package resources. The family document is titled “Artix-7 FPGAs Data Sheet: DC and AC Switching Characteristics.” Use the SBG484 package pinout files for exact ball assignments, power pins, and differential-pair constraints, because the family datasheet covers the common Artix-7 electrical architecture rather than every package-specific detail.
Where can I find the XC7A200T-2SBG484C pinout?
The authoritative pinout is provided in AMD’s Artix-7 Package Device Pinout Files, which include ASCII TXT and CSV package files. Search the SBG484 package file for XC7A200T and verify every ball assignment against the selected PCB footprint. Use UG475 for the package-file format and the pinout interpretation, and do not infer unused balls from another XC7A200T package.
What are the key specifications of XC7A200T-2SBG484C?
The XC7A200T-2SBG484C combines 215,360 logic cells, 16,825 logic blocks, 13,455,360 RAM bits, and 285 I/O sites in a 484-ball FCBGA package. The AMD Artix-7 data sheet identifies 28 nm process technology and a 1 V core configuration for this ordering code. Its -2 speed grade provides the timing classification used for implementation and system-level timing analysis.
How does XC7A200T-2SBG484C compare with XC7A200T-2SBG484I?
Both devices use the SBG484 package and the same Artix-7 XC7A200T implementation, while the final ordering suffix distinguishes their environmental grade. The XC7A200T-2SBG484C is the commercial-grade option, whereas XC7A200T-2SBG484I is the industrial-grade option. Their shared 484-ball footprint allows a board-level substitution, but temperature qualification and operating requirements must match the deployment environment.
Can XC7A200T-2FBG484C replace XC7A200T-2SBG484C?
The XC7A200T-2FBG484C is an Artix-7 XC7A200T device with the same 484-ball FBG package and -2 speed grade, making it a same-footprint ordering option. The two ordering codes differ in temperature-grade designation rather than the core FPGA architecture. Before substitution, confirm the exact package pinout file, temperature range, and the production requirements for the target application.
What is the best drop-in replacement for XC7A200T-2SBG484C?
The closest same-package replacements are the temperature- and ordering-code variants XC7A200T-2FBG484C, XC7A200T-2FBG484I, and XC7A200T-2SBG484I. Each retains the 484-ball Artix-7 footprint, -2 speed grade, 215,360 logic cells, and 13,455,360 RAM bits. Choose according to environmental qualification rather than treating every suffix as electrically and commercially identical.
Is XC7A200T-2SBG484C suitable for high-speed signal-processing applications?
Yes, the XC7A200T-2SBG484C is suitable for parallel digital signal processing because it combines 215,360 logic cells with 13,455,360 RAM bits and 285 I/O sites. The -2 grade supports timing-focused Artix-7 designs, while dedicated I/O resources support high-speed interfaces. Actual interface rates depend on the selected transceiver or I/O type, board topology, clocking, and timing closure.
What is the best Intel equivalent for XC7A200T-2SBG484C?
No Intel device can be treated as a confirmed pin-for-pin drop-in replacement without an explicit package and pinout cross-reference. The XC7A200T-2SBG484C uses a proprietary 484-ball Artix-7 footprint with a defined ball map and programmable architecture. An Intel FPGA migration may require a new schematic, PCB layout, pin constraints, and device-specific RTL or toolchain changes.
Where can I buy XC7A200T-2SBG484C online?
Use the Request a Quote form on this page to request XC7A200T-2SBG484C availability, lot traceability, and a quotation for the exact 484-ball commercial-grade ordering code. The quote request should state the required quantity, delivery target, and whether the device must include date-code or traceability documentation. This avoids ordering a superficially similar package or temperature-grade variant.
What is the price of XC7A200T-2SBG484C?
The current unit price for XC7A200T-2SBG484C is generated through the Request a Quote form on this page. Submit the exact MPN and required quantity to obtain current commercial terms, including quantity breaks and availability. Engineers should also confirm that the quote refers to the SBG484 commercial-grade ordering code rather than an FBG484, industrial-grade, or other speed-grade variant.
What is the lead time for XC7A200T-2SBG484C?
The current lead time for XC7A200T-2SBG484C should be confirmed through the Request a Quote form on this page. Include the planned production quantity and required delivery date so the supplier can identify available inventory and manufacturing allocation for the exact ordering code. For new production, also allow additional time for PCB fabrication, assembly, programming, and hardware validation.
Is XC7A200T-2SBG484C in stock?
Stock for XC7A200T-2SBG484C should be checked by submitting the exact MPN through the Request a Quote form on this page. Include the required quantity and whether unopened manufacturer packaging is mandatory. Availability should be confirmed for the SBG484, -2 speed, commercial-temperature ordering code so that temperature-grade and package differences do not create an unintended substitution.
When should I choose XC7A200T-2SBG484C over XC7A200T-2SBG484I?
Choose XC7A200T-2SBG484C when commercial-temperature operating conditions are sufficient and the design does not require industrial qualification. Choose XC7A200T-2SBG484I when the product must operate across an industrial temperature range. Both preserve the 484-ball package and Artix-7 architecture, so the choice should be driven by environmental requirements rather than logic-resource capacity.
What PCB considerations apply to the XC7A200T-2SBG484C FCBGA package?
The 484-ball FCBGA requires a dense multilayer PCB with short power and ground connections, carefully controlled escape routing, and package-specific ball assignments. Use the AMD SBG484 pinout files and XC7A200T schematic guidance to assign every power, ground, configuration, clock, and user I/O ball. Decoupling, plane geometry, thermal vias, and high-speed return paths should be reviewed before fabrication.

Données de référence d'ingénierie pour XC7A200T-2SBG484C — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose XC7A200T-2SBG484C for a commercial-temperature Artix-7 design that requires 215,360 logic cells, 13,455,360 RAM bits, 285 I/O sites, and a 484-ball FCBGA footprint. Select XC7A200T-2SBG484I when the same electrical resources and package are needed but the equipment must support industrial temperatures. XC7A200T-2FBG484C and XC7A200T-2FBG484I are useful same-family ordering alternatives when the approved package code and qualification requirements match; confirm their exact package files before schematic release. XC7A200T-2SBG484E is appropriate only when its extended-temperature classification satisfies the product specification. Cross-brand devices such as Intel or Lattice FPGAs should not be treated as drop-in replacements because their packages, ball maps, toolchains, and device architectures differ. For every choice, validate power integrity, thermal performance, timing closure, and the final PCB footprint rather than relying only on the family name.

Comparaison avec les alternatives

Paramètre Ce produit XC7A200T-2FBG484C XC7A200T-2FBG484I XC7A200T-2SBG484I XC7A200T-2SBG484E
Brand AMD AMD AMD AMD AMD
Package SBG484, 484-FBGA/FCBGA FBG484, 484-FBGA/FCBGA FBG484, 484-FBGA/FCBGA SBG484, 484-FBGA/FCBGA SBG484, 484-FBGA/FCBGA
FPGA Logic Cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells
Logic Blocks 16,825 LABs/CLBs 16,825 LABs/CLBs 16,825 LABs/CLBs 16,825 LABs/CLBs 16,825 LABs/CLBs
Embedded RAM 13,455,360 bits 13,455,360 bits 13,455,360 bits 13,455,360 bits 13,455,360 bits
Input/Output Sites 285 I/O 285 I/O 285 I/O 285 I/O 285 I/O
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade -2 -2 -2 -2 -2
Core Supply Voltage 1 V 1 V 1 V 1 V 1 V

Principaux différenciateurs

  • High logic capacity with dense integrated connectivity (vs XC7A200T-2SBG484I)
  • Commercial-temperature Artix-7 option in a 484-ball package (vs XC7A200T-2FBG484C)
  • Substantial block-memory capacity for parallel systems (vs XC7A200T-2FBG484I)

Notes de conception

Use the XC7A200T schematic and SBG484 package documentation to partition VCCINT, VCCAUX, configuration, and I/O supplies. Place the required bulk and high-frequency decoupling capacitors close to their associated supply balls, connect each power region to uninterrupted planes where practical, and avoid placing sensitive I/O return paths beneath switching or high-current circuitry. Verify the selected regulator startup behavior, sequencing tolerances, and steady-state noise against the device power requirements.

The 484-ball FCBGA requires a multilayer PCB with short via transitions from each escape layer to the device balls. Assign the footprint from the AMD SBG484 package files rather than transferring a generic BGA land pattern. Keep power and ground vias in the relevant ball rows, reserve compatible footprint changes only after reviewing assembly capability, and control differential-pair length and impedance on every high-speed interface.

Estimated thermal behavior must be calculated from actual utilization, selected speed grade, core voltage, I/O activity, ambient temperature, and PCB copper area. These operating conditions are not established by the device name alone. Use Vivado power estimates after implementation, then compare junction-temperature predictions with the package limits in the AMD data sheet. Add thermal vias, copper spreading, or a heat-spreading structure when the calculated margin is insufficient.

Validate every high-speed interface with the actual transceiver or I/O type, target transfer rate, board stack-up, and external circuitry. Pay particular attention to clock jitter, source-synchronous routing, return-path continuity, and board-to-board connectors. Use IBIS or SPICE models where available, preserve intended launch geometry, and avoid substituting a generic pin arrangement when changing SBG484 ordering codes.

Do not treat FBG484 and SBG484 ordering-code changes as proof that every environmental or legacy-design requirement is identical. Confirm package pinout files, temperature grade, speed grade, configuration behavior, and production status before substitution. Also avoid selecting a competitor FPGA solely by logic-cell count; Artix-7 pinout, IP support, tooling, memory resources, I/O standards, and board footprint all affect the migration effort.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer and distributor material identifies the XC7A200T-2SBG484C as an Artix-7 FPGA but does not provide a complete compliance declaration. AEC-Q100 is not applicable to this general-purpose commercial FPGA ordering code.

Données vérifiées le : 2026-11-18 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

xc7a200t board xc7a200t datasheet xc7a200t development board xc7a200t price xc7a200t fpga xc7a200t 2fbg484i xc7a200t 2fbg676i xc7a200t 2ffg1156i xc7a200t 1ffg1156i xc7a200t 2sbg484i XC7A200T-2SBG484C datasheet pdf XC7A200T-2SBG484C pinout XC7A200T-2SBG484C drop-in replacement XC7A200T-2SBG484C 215360 cells AMD XC7A200T-2SBG484C

Composants & termes associés

AMD XC7A200T-2SBG484C XC7A200T-2FBG484C XC7A200T-2FBG484I XC7A200T-2SBG484I XC7A200T-2SBG484E Artix-7 FPGA field-programmable gate array programmable logic semiconductor 215360 logic cells 16825 logic blocks 13455360 RAM bits 285 I/O sites 28 nm process technology 1 V core voltage -2 speed grade SBG484 FCBGA BGA surface mount Vivado UG475
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ