XC7A200T-2SBG484C - 215K Cell Artix-7 FPGA | AMD
부품 번호: XC7A200T-2SBG484C ✓ 활성XC7A200T-2SBG484C 개요
An FPGA is a semiconductor whose internal logic, interconnect, and I/O are configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable input/output resources, dedicated processing elements, and clocking resources on one device. The XC7A200T family therefore implements complete digital systems in a single integrated circuit rather than relying on a fixed sequence of processor instructions.
The Artix-7 architecture provides 215,360 programmable logic cells, 16,825 logic blocks, and 13,455,360 RAM bits. These resources support parallel data paths, digital filters, protocol bridges, control logic, and embedded systems. The device also provides 285 I/O sites and dedicated high-performance I/O resources, allowing a board design to combine multiple interfaces without relying on a large collection of external devices.
The XC7A200T-2SBG484C is manufactured on 28 nm technology and is identified with a 1 V core-voltage configuration in the published device listing. Its -2 designation identifies the performance grade. Compared with lower-speed Artix-7 options, the -2 grade favors designs that require greater logic timing margin, although board-level signal integrity, power delivery, and tool constraints still determine whether a design closes timing successfully.
Typical uses include industrial control and automation, embedded vision, communications infrastructure, test equipment, consumer peripherals, and high-throughput digital signal processing. The 215,360-cell fabric is particularly suitable for parallel acquisition systems, protocol conversion, image pre-processing, control-plane logic, and designs that combine MicroBlaze processor logic with dedicated hardware pipelines.
The most important design consideration is package and power planning. The 484-ball FCBGA requires a dense multilayer PCB, careful power-plane segmentation, and constrained escape routing from the device. Configure the power rails, decoupling network, clocking scheme, and I/O standards for the selected board environment, then validate timing and signal integrity with the complete Vivado design flow.
This page combines the exact device identity, package and logic-resource data, drop-in ordering-code comparisons, and practical PCB guidance. It is intended to help engineers confirm that XC7A200T-2SBG484C matches the intended Artix-7 design before investing in board layout, tooling, or procurement.
드롭인 대체품: XC7A200T-2SBG484C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7A200T-2SBG484C (동일 폼 팩터 및 풋프린트) — 차이점: Package, Block RAM, Device Type, Logic Cells, Operating Temperature.
XC7A200T-2FBG484C
✅ 드롭인✓ 재고 있음
$320 / 개
데이터시트 보기 →XC7A200T-2FBG484I
✅ 드롭인✓ 재고 있음
$89.15 / 개
데이터시트 보기 →XC7A200T-2SBG484I
✅ 드롭인가격 문의
데이터시트 보기 →XC7A200T-2SBG484E
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7A200T-2SBG484C 최대 정격 & 전기적 특성
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| FPGA Logic Cells | 215,360 cells |
| Logic Blocks | 16,825 LABs/CLBs |
| Embedded RAM | 13,455,360 bits |
| Input/Output Sites | 285 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Speed Grade | -2 |
| 패키지 | SBG484, 484-FBGA/FCBGA |
| Package Ball Count | 484 balls |
| 실장 유형 | Surface mount |
| Programmable Logic Type | FPGA |
| Temperature Grade | Commercial |
| Device Family | Artix-7 |
| Product Series | 7 Series |
XC7A200T-2SBG484C 484 balls 핀 구성 가이드
XC7A200T-2SBG484C(484 balls 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7A200T-2SBG484C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7A200T-2SBG484C 적합 용도: 6 애플리케이션s: Industrial Automation and Control, Embedded Vision Preprocessing, Communications Protocol Conversion, Test and Measurement Equipment, High-Throughput Digital Signal Processing, Embedded Processor Platform.
Industrial Automation and Control
The XC7A200T-2SBG484C fits industrial control systems that combine machine sequencing, safety-adjacent logic, communications, and data acquisition in one programmable device. Its 215,360 logic cells can implement multiple parallel control paths, while 13,455,360 RAM bits support state machines, diagnostics, and protocol buffers. The 285 I/O sites provide flexibility for encoders, discrete controls, field buses, and operator interfaces. Using a single FPGA reduces controller partitioning and keeps timing-critical operations in a single fabric. The principal design constraints are deterministic I/O behavior, industrial temperature requirements, and the need for careful BGA power delivery. A production design should select the appropriate ordering grade, constrain every pin in Vivado, and validate timing with realistic clock and I/O assumptions.
Embedded Vision Preprocessing
The XC7A200T-2SBG484C can serve as a parallel image and video preprocessing engine because its 215,360 logic cells provide substantial parallelism for pixel pipelines and the 13,455,360 RAM bits support line buffers and working storage. The 285 I/O sites help connect cameras or parallel sensors, while programmable logic can implement thresholding, color conversion, filtering, and format conversion before downstream processing. The -2 speed grade favors demanding timing pipelines. Practical implementations should use dedicated clocking resources, constrain video interfaces according to their standards, and check timing at the intended pixel clock. The BGA package also requires careful escape routing and return-path continuity, so signal-integrity simulation should be performed for camera links and any high-speed memory interfaces.
Communications Protocol Conversion
The XC7A200T-2SBG484C is suitable for bridging dissimilar communication interfaces by combining programmable logic, block memory, and 285 I/O sites in one Artix-7 device. Designers can instantiate parallel datapaths for framing, buffering, clock-domain crossing, CRC generation, and packet adaptation without relying on a fixed processor architecture. The 13,455,360 RAM bits provide storage for transmit and receive queues, while the 215,360-cell fabric supports multiple protocol channels in parallel. The -2 grade is useful for demanding interface timing, but implementation success still depends on clocking, I/O standards, and board-level signal integrity. Use the package-specific constraints for every high-speed interface and verify timing after placing external transceivers, isolation components, and impedance-controlled board structures.
Test and Measurement Equipment
The XC7A200T-2SBG484C can implement parallel acquisition, pattern generation, real-time analysis, and instrument control within a compact FPGA subsystem. Its 215,360 logic cells support configurable test engines and timing checks, while 13,455,360 RAM bits accommodate sample buffers and correlation or histogram functions. The 285 I/O sites allow direct connection to converters, memory devices, triggers, and synchronization inputs. In a measurement instrument, clock jitter, input thresholding, calibration paths, and deterministic latency often determine performance more than raw logic count. Engineers should use dedicated clocking resources, define acquisition windows in constraints, and verify high-speed input timing against the selected I/O standard. A multilayer PCB is needed to route the dense FCBGA package while maintaining controlled impedance and adequate power integrity.
High-Throughput Digital Signal Processing
The XC7A200T-2SBG484C is appropriate for fixed-function digital filters, FFT-like parallel pipelines, modulation, error correction, and real-time waveform processing. Its 215,360 programmable cells can execute multiple lanes concurrently, and the 13,455,360 RAM bits support coefficient storage, circular buffers, and overlap-save or overlap-add techniques. The 285 I/O sites provide parallel data connections to external converters and memory. The -2 speed grade increases timing margin compared with lower-speed options, while the 28 nm Artix-7 implementation combines substantial logic capacity with lower system complexity than a network of discrete ASICs and FPGA components. Engineers should map DSP operations to the appropriate pipeline structure, apply registered I/O where required, and validate arithmetic throughput, latency, and resource utilization through synthesis and implementation.
Embedded Processor Platform
The XC7A200T-2SBG484C can combine a soft processor with application-specific hardware when a design needs flexible control logic and parallel acceleration. The 215,360 logic cells and 13,455,360 RAM bits provide enough resources for an embedded processor, peripherals, data movement, and dedicated processing pipelines, while 285 I/O sites support external memories and communications. This architecture is useful for boot control, network management, sensor aggregation, and custom accelerators. The key engineering task is partitioning the design so latency-critical operations remain in hardware while general-purpose code handles configuration and control. Memory interfaces require careful bank sizing and timing constraints, and the FCBGA footprint demands controlled impedance and sufficient power planes. Use Vivado synthesis and implementation reports to confirm processor resources, memory bandwidth, and timing before PCB release.
엔지니어링 참조 데이터: XC7A200T-2SBG484C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A200T-2FBG484C | XC7A200T-2FBG484I | XC7A200T-2SBG484I | XC7A200T-2SBG484E |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | SBG484, 484-FBGA/FCBGA | FBG484, 484-FBGA/FCBGA | FBG484, 484-FBGA/FCBGA | SBG484, 484-FBGA/FCBGA | SBG484, 484-FBGA/FCBGA |
| FPGA Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Logic Blocks | 16,825 LABs/CLBs | 16,825 LABs/CLBs | 16,825 LABs/CLBs | 16,825 LABs/CLBs | 16,825 LABs/CLBs |
| Embedded RAM | 13,455,360 bits | 13,455,360 bits | 13,455,360 bits | 13,455,360 bits | 13,455,360 bits |
| Input/Output Sites | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -2 | -2 | -2 | -2 |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V |
주요 차별점
- High logic capacity with dense integrated connectivity (vs XC7A200T-2SBG484I)
- Commercial-temperature Artix-7 option in a 484-ball package (vs XC7A200T-2FBG484C)
- Substantial block-memory capacity for parallel systems (vs XC7A200T-2FBG484I)
설계 노트
Use the XC7A200T schematic and SBG484 package documentation to partition VCCINT, VCCAUX, configuration, and I/O supplies. Place the required bulk and high-frequency decoupling capacitors close to their associated supply balls, connect each power region to uninterrupted planes where practical, and avoid placing sensitive I/O return paths beneath switching or high-current circuitry. Verify the selected regulator startup behavior, sequencing tolerances, and steady-state noise against the device power requirements.
The 484-ball FCBGA requires a multilayer PCB with short via transitions from each escape layer to the device balls. Assign the footprint from the AMD SBG484 package files rather than transferring a generic BGA land pattern. Keep power and ground vias in the relevant ball rows, reserve compatible footprint changes only after reviewing assembly capability, and control differential-pair length and impedance on every high-speed interface.
Estimated thermal behavior must be calculated from actual utilization, selected speed grade, core voltage, I/O activity, ambient temperature, and PCB copper area. These operating conditions are not established by the device name alone. Use Vivado power estimates after implementation, then compare junction-temperature predictions with the package limits in the AMD data sheet. Add thermal vias, copper spreading, or a heat-spreading structure when the calculated margin is insufficient.
Validate every high-speed interface with the actual transceiver or I/O type, target transfer rate, board stack-up, and external circuitry. Pay particular attention to clock jitter, source-synchronous routing, return-path continuity, and board-to-board connectors. Use IBIS or SPICE models where available, preserve intended launch geometry, and avoid substituting a generic pin arrangement when changing SBG484 ordering codes.
Do not treat FBG484 and SBG484 ordering-code changes as proof that every environmental or legacy-design requirement is identical. Confirm package pinout files, temperature grade, speed grade, configuration behavior, and production status before substitution. Also avoid selecting a competitor FPGA solely by logic-cell count; Artix-7 pinout, IP support, tooling, memory resources, I/O standards, and board footprint all affect the migration effort.
규정 준수 정보
The manufacturer and distributor material identifies the XC7A200T-2SBG484C as an Artix-7 FPGA but does not provide a complete compliance declaration. AEC-Q100 is not applicable to this general-purpose commercial FPGA ordering code.