XC7K70T-L2FBG676E - 65.6K Cell Kintex-7 FPGA | AMD
Référence : XC7K70T-L2FBG676E ✓ ActifXC7K70T-L2FBG676E Présentation
A field-programmable gate array is a semiconductor device whose digital logic and interconnect fabric can be configured after manufacture. The FPGA hierarchy used by this component runs from the Kintex-7 device family through the broader Kintex-7 product line to programmable logic devices and FPGAs. The XC7K70T combines configurable logic blocks with programmable I/O, block RAM, and dedicated processing resources, allowing one package to implement functions that otherwise require multiple ASICs or discrete programmable devices.
The device provides 65,600 logic cells and a 1 V nominal core voltage within an identified 0.87 V to 0.93 V operating supply range. Its 676-ball package exposes a large pin count for high-speed interfaces and is identified as S-PBGA-B676 in package documentation. The lidless construction leaves the thermal behavior dependent on the PCB substrate, solder balls, vias, and copper area beneath the device, so thermal design is an integral part of any successful implementation.
The -2L grade is differentiated from the standard -2 grade by its lower-power screening. It is therefore a strong choice when a design requires Kintex-7 performance and I/O density while controlling static and dynamic power. This makes the XC7K70T-L2FBG676E suitable for industrial image processing, communications infrastructure, test equipment, high-speed data acquisition, and embedded signal-processing systems that cannot justify an UltraScale device on cost.
Typical deployments include radar and communications baseband logic, industrial camera interfaces, protocol bridges, video-processing pipelines, and software-defined-radio control planes. Designers should treat the 676-terminal footprint as a high-bandwidth routing challenge and follow the AMD Kintex-7 package pinout files together with UG475 when assigning PCB tracks and ball constraints.
For a new board, the main trade-off is density against complexity: the XC7K70T-L2FBG676E offers substantial programmable capacity in one package, but its 27 x 27 mm ball-grid land pattern, ball pitch, and power-delivery network demand careful PCB planning. This page combines package facts, ordering-code differences, drop-in device alternatives, and design guidance to support hardware and sourcing decisions.
Alternatives de remplacement direct pour XC7K70T-L2FBG676E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7K70T-L2FBG676E (même facteur de forme et même empreinte) — différant par Speed Grade, Block RAM, Configuration Interfaces, Logic Cells, Package.
XC7K70T-2FBG676E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC7K70T-2FBG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7K70T-2FBG676C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7K70T-1FBG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7K70T-1FBG676C
✅ Remplacement direct✗ Rupture de stock
$36.5909 / unité
Voir la fiche technique →XC7K70T-2LFBG676E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC7K70T-L2FBG676E Valeurs maximales et caractéristiques électriques
| Device Type | Kintex-7 Field Programmable Gate Array (FPGA) |
| Programmable Logic Cells | 65,600 cells |
| Process Technology | 28 nm |
| Speed Grade | -2L low-power speed grade |
| Nominal Core Supply | 1 V |
| Identified Core Supply Range | 0.87 V to 0.93 V |
| Package Type | 676-terminal lidless FCBGA (S-PBGA-B676) |
| Package Dimensions | 27 x 27 mm |
| Terminal Count | 676 terminals |
| Style de montage | Surface mount |
| Product Category | Programmable logic devices, field-programmable gate arrays |
| Device Family | Kintex-7 |
| Lower-Power Screening | -2L devices are screened for lower maximum static power |
| Operating Mode | Lower core voltage capability than the standard -2 grade |
Guide de configuration des broches du XC7K70T-L2FBG676E 27 x 27 mm
Configuration des broches du XC7K70T-L2FBG676E (boîtier 27 x 27 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7K70T-L2FBG676E.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7K70T-L2FBG676E convient pour 6 applications: Communications Baseband Processing, Industrial Image and Vision Processing, High-Speed Data Acquisition, Software-Defined Radio Control and Modulation, Test and Measurement Instrumentation, Aerospace and Defense Control Systems.
Communications Baseband Processing
The XC7K70T-L2FBG676E fits communications baseband and protocol-processing designs that require substantial parallel logic without the power footprint of a larger FPGA. Its 65,600 programmable logic cells support packet parsing, filtering, buffering, and interface control functions, while the 676-terminal package offers extensive I/O connectivity. The -2L grade is screened for lower maximum static power and can operate at lower core voltages than the standard -2 grade, helping control thermal load in continuously operating communications equipment. Engineers should use the AMD package pinout files and UG475 for all 676 ball assignments, and validate timing against the selected speed-grade limits.
Recommandé
Industrial Image and Vision Processing
Industrial camera and machine-vision systems benefit from the XC7K70T-L2FBG676E when parallel pixel processing, multi-format capture, and real-time control must share one programmable platform. The device's 65,600 logic cells can balance pipeline stages, control logic, and data movement, while its large 676-terminal package supports multiple high-speed interfaces and parallel sensors. Because the -2L grade is screened for lower maximum static power, it is particularly useful in enclosed systems where sustained operating temperature matters. Layout should provide dense power vias and a broad thermal path under the lidless FCBGA, while signal-integrity checks should cover every high-speed interface routed through the 27 x 27 mm package.
Recommandé
High-Speed Data Acquisition
The XC7K70T-L2FBG676E is appropriate for high-speed data-acquisition systems that must capture, align, and process multiple parallel channels in programmable logic. Its 65,600-cell Kintex-7 architecture provides capacity for acquisition pipelines, trigger logic, packing, and real-time filtering, while the 676-terminal package provides the I/O breadth needed for wide parallel buses and multiple high-speed transceivers. The device operates around a 1 V nominal core supply, requiring a carefully designed power-delivery network with very low impedance. Use the official AMD package files for ball placement and verify acquisition timing in the selected -2L speed grade rather than relying on nominal logic-cell counts alone.
Recommandé
Software-Defined Radio Control and Modulation
Software-defined radio designs can use the XC7K70T-L2FBG676E for digital modulation, filtering, packetization, and control-plane functions that must coexist with external converters or RF front ends. The 65,600 logic cells allow parallel hardware to accelerate algorithms that would otherwise burden a processor, and the 676-terminal package supports rich parallel connectivity to converters, memory, and network interfaces. The -2L grade's lower-power screening is valuable in fixed and mobile installations where continuous duty cycles amplify thermal concerns. Designers should separate sensitive clock and data paths, validate every transceiver interface against the selected speed grade, and provide a robust thermal plane beneath the lidless package.
Recommandé
Test and Measurement Instrumentation
The XC7K70T-L2FBG676E is well suited to programmable test and measurement equipment requiring parallel control, wide data capture, and deterministic hardware logic. It can implement sequencers, pattern generators, protocol analyzers, or real-time signal-processing blocks while retaining flexible software control through the FPGA toolchain. Its 65,600 logic cells allow more parallel channels than a small logic device, and the 676-terminal package leaves room for dense control, auxiliary I/O, and high-speed data paths. The lower-power -2L grade can simplify thermal design in compact desktop instruments. Validate clocking, pin constraints, and configuration schemes with the official AMD Kintex-7 documentation before layout release.
Recommandé
Aerospace and Defense Control Systems
The XC7K70T-L2FBG676E can support programmable control, monitoring, and data-processing functions in aerospace, defense, and high-reliability industrial systems where logic density and deterministic operation are essential. The 28 nm Kintex-7 implementation provides 65,600 programmable logic cells in a single 676-terminal package, enabling consolidation of multiple fixed-function blocks. Selection for a flight or mission-critical application requires confirmation of the exact ordering code, temperature grade, reliability documentation, radiation suitability, and procurement traceability. The -2L suffix should not be interpreted as automatic qualification for every aerospace program. Engineering teams must review the applicable AMD reliability and radiation documentation and the complete system safety requirements.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7K70T-L2FBG676E — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7K70T-2FBG676E | XC7K70T-2FBG676I | XC7K70T-1FBG676I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 676-terminal lidless FCBGA (S-PBGA-B676) | 676-terminal lidless FCBGA (S-PBGA-B676) | 676-terminal lidless FCBGA (S-PBGA-B676) | 676-terminal lidless FCBGA (S-PBGA-B676) |
| Programmable Logic Cells | 65,600 cells | 65,600 cells | 65,600 cells | 65,600 cells |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2L low-power speed grade | -2 standard speed grade | -2 standard speed grade | -1 speed grade |
| Nominal Core Supply | 1 V | 1 V | 1 V | 1 V |
| Temperature-Grade Suffix | E suffix | E suffix | I suffix | I suffix |
| Package Dimensions | 27 x 27 mm | 27 x 27 mm | 27 x 27 mm | 27 x 27 mm |
Principaux différenciateurs
- Lower-power speed grade within the Kintex-7 family (vs XC7K70T-2FBG676E)
- Same-package route for power-sensitive upgrade paths (vs XC7K70T-2FBG676I)
- Lower speed grade option for cost-sensitive timing designs (vs XC7K70T-1FBG676I)
- Identical package dimensions simplify footprint reuse (vs XC7K70T-2FBG676C)
Notes de conception
The XC7K70T-L2FBG676E uses a lidless 27 x 27 mm FCBGA, so heat must leave through the solder balls, package substrate, vias, and PCB copper. Follow the AMD package guidance for layer count, via placement, and thermal-via arrays. The -2L grade reduces static-power demand but does not remove the need for a low-resistance thermal path. Validate peak junction temperature in the final enclosure because the internal package temperature can be higher than the PCB surface temperature.
Separate the 1 V core supply from all required I/O supplies and use the power-decoupling and plane connections specified in the AMD XC7K70T documentation. Place bulk and high-frequency decoupling capacitance close to the device supply and ground balls, and keep supply-return paths short. Do not infer permitted supply voltages for every I/O bank from the identified 0.87 V to 0.93 V core range; confirm each bank configuration and voltage directly against the data sheet.
Assign all 676 terminals using the official AMD Kintex-7 Package Device Pinout Files and UG475 rather than a generic BGA symbol. The package files include TXT and CSV assignments for the exact device package. Apply the manufacturer's ball-pad, solder-mask, and paste recommendations during PCB footprint creation, and reserve no-net and special-purpose balls exactly as shown in the official data. This prevents silent routing conflicts caused by using a superficially similar FBG package.
Route high-speed interfaces as short, controlled-impedance paths with continuous reference planes and avoid splits across plane boundaries. Keep clocks away from noisy switching nodes, include matching reference vias at layer transitions, and validate length and loss budgets against the selected I/O standard. Because all alternatives remain in the same dense FBG676 footprint, PCB reuse is possible, but timing constraints and I/O voltage compatibility still require separate verification for each speed or temperature grade.
Do not treat XC7K70T-1, XC7K70T-2, and XC7K70T-L2 orderings as automatically interchangeable. The speed grade changes achievable timing and power characteristics, while the E, I, and C suffixes identify different temperature classes. Changing the -2L grade to -1 or -2 can require timing-constraint changes and power-budget updates. Also verify that configuration memories, startup behavior, and any security requirements remain valid after any suffix change.
Informations de conformité
The available part documentation identifies the device, package, process technology, and power characteristics but does not state the requested compliance declarations.