AMD

XC7K70T-L2FBG676E - 65.6K Cell Kintex-7 FPGA | AMD

MPN: XC7K70T-L2FBG676E ✓ सक्रिय
1 V Vdss 676-terminal lidless FCBGA (S-PBGA-B676) Package -2L low-power speed grade Speed
न्यूनतम ऑर्डर मात्रा: 1 |

XC7K70T-L2FBG676E अवलोकन

The AMD XC7K70T-L2FBG676E is a Kintex-7 field-programmable gate array built on 28 nm technology, with 65,600 programmable logic cells, a nominal 1 V core supply, and a 676-terminal lidless FCBGA package measuring 27 x 27 mm. The -L2 designation identifies the lower-power -2L speed grade, which is screened for lower maximum static power and can operate at lower core voltages than the standard -2 grade. It is intended for high-performance signal processing, programmable logic, and multi-gigabit data-path designs where logic density and I/O capability are more important than very low unit cost.

A field-programmable gate array is a semiconductor device whose digital logic and interconnect fabric can be configured after manufacture. The FPGA hierarchy used by this component runs from the Kintex-7 device family through the broader Kintex-7 product line to programmable logic devices and FPGAs. The XC7K70T combines configurable logic blocks with programmable I/O, block RAM, and dedicated processing resources, allowing one package to implement functions that otherwise require multiple ASICs or discrete programmable devices.

The device provides 65,600 logic cells and a 1 V nominal core voltage within an identified 0.87 V to 0.93 V operating supply range. Its 676-ball package exposes a large pin count for high-speed interfaces and is identified as S-PBGA-B676 in package documentation. The lidless construction leaves the thermal behavior dependent on the PCB substrate, solder balls, vias, and copper area beneath the device, so thermal design is an integral part of any successful implementation.

The -2L grade is differentiated from the standard -2 grade by its lower-power screening. It is therefore a strong choice when a design requires Kintex-7 performance and I/O density while controlling static and dynamic power. This makes the XC7K70T-L2FBG676E suitable for industrial image processing, communications infrastructure, test equipment, high-speed data acquisition, and embedded signal-processing systems that cannot justify an UltraScale device on cost.

Typical deployments include radar and communications baseband logic, industrial camera interfaces, protocol bridges, video-processing pipelines, and software-defined-radio control planes. Designers should treat the 676-terminal footprint as a high-bandwidth routing challenge and follow the AMD Kintex-7 package pinout files together with UG475 when assigning PCB tracks and ball constraints.

For a new board, the main trade-off is density against complexity: the XC7K70T-L2FBG676E offers substantial programmable capacity in one package, but its 27 x 27 mm ball-grid land pattern, ball pitch, and power-delivery network demand careful PCB planning. This page combines package facts, ordering-code differences, drop-in device alternatives, and design guidance to support hardware and sourcing decisions.

के लिए ड्रॉप-इन विकल्प XC7K70T-L2FBG676E — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC7K70T-L2FBG676E (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Speed Grade, Block RAM, Configuration Interfaces, Logic Cells, Package.

AMD
Speed Grade: -1
Block RAM: 4,976,640 bits
Configuration Interfaces: JTAG, SPI, BPI
इसके साथ तुलना करें XC7K70T-L2FBG676E →
AMD
Speed Grade: -2
Block RAM: 4976640 bits
Configuration Interfaces: JTAG, SelectMAP, SPI
इसके साथ तुलना करें XC7K70T-L2FBG676E →

XC7K70T-2FBG676E

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 676-terminal lidless FCBGA (S-PBGA-B676)
Standard -2 speed grade replaces the lower-power -2L grade; the package and 65,600-cell device remain compatible, but power and timing performance differ.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC7K70T-2FBG676I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
AMD
📦 676-terminal lidless FCBGA (S-PBGA-B676)
Kintex-7 · 65600 · 300 · 4976640 bits · 240 · 5 · 28nm · 1V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7K70T-2FBG676C

✅ ड्रॉप-इन
AMD
📦 676-terminal lidless FCBGA (S-PBGA-B676)
Kintex-7 field-programmable gate array · 1286 MHz · 1 V · 0°C to 85°C · 676-pin FCBGA (FBG676) · 676-pin S-PBGA-B676 / 676-BBGA · 300 · 300

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7K70T-1FBG676I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
AMD
📦 676-terminal lidless FCBGA (S-PBGA-B676)
Field Programmable Gate Array (FPGA) · Kintex-7 · 65,600 · 5,125 · 4,860 Kb · 300 · 1,098 MHz · 28 nm CMOS

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7K70T-1FBG676C

✅ ड्रॉप-इन
AMD
📦 676-terminal lidless FCBGA (S-PBGA-B676)
Kintex-7 · 65,600 · 4,976,640 bits · 300 · 28nm · 1V · 676-BBGA, FCBGA (lidless) · 676

✗ स्टॉक में नहीं

$36.5909 / यूनिट

डेटाशीट देखें →

XC7K70T-2LFBG676E

✅ ड्रॉप-इन
📦 676-terminal lidless FCBGA (S-PBGA-B676)
The -2L low-power grade is retained while the ordering suffix changes; verify exact device revision, configuration, and ordering-code equivalence before substitution.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC7K70T-L2FBG676E Maximum Ratings और Electrical Characteristics

Device Type Kintex-7 Field Programmable Gate Array (FPGA)
Programmable Logic Cells 65,600 cells
Process Technology 28 nm
Speed Grade -2L low-power speed grade
Nominal Core Supply 1 V
Identified Core Supply Range 0.87 V to 0.93 V
Package Type 676-terminal lidless FCBGA (S-PBGA-B676)
Package Dimensions 27 x 27 mm
Terminal Count 676 terminals
माउंटिंग स्टाइल Surface mount
Product Category Programmable logic devices, field-programmable gate arrays
Device Family Kintex-7
Lower-Power Screening -2L devices are screened for lower maximum static power
Operating Mode Lower core voltage capability than the standard -2 grade

XC7K70T-L2FBG676E 27 x 27 mm पिन कॉन्फ़िगरेशन गाइड

XC7K70T-L2FBG676E (27 x 27 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XC7K70T-L2FBG676E के लिए 27 x 27 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC7K70T-L2FBG676E.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XC7K70T-L2FBG676E के लिए उपयुक्त है 6 अनुप्रयोगs: Communications Baseband Processing, Industrial Image and Vision Processing, High-Speed Data Acquisition, Software-Defined Radio Control and Modulation, Test and Measurement Instrumentation, Aerospace and Defense Control Systems.

🌐

Communications Baseband Processing

The XC7K70T-L2FBG676E fits communications baseband and protocol-processing designs that require substantial parallel logic without the power footprint of a larger FPGA. Its 65,600 programmable logic cells support packet parsing, filtering, buffering, and interface control functions, while the 676-terminal package offers extensive I/O connectivity. The -2L grade is screened for lower maximum static power and can operate at lower core voltages than the standard -2 grade, helping control thermal load in continuously operating communications equipment. Engineers should use the AMD package pinout files and UG475 for all 676 ball assignments, and validate timing against the selected speed-grade limits.

🏭

Industrial Image and Vision Processing

Industrial camera and machine-vision systems benefit from the XC7K70T-L2FBG676E when parallel pixel processing, multi-format capture, and real-time control must share one programmable platform. The device's 65,600 logic cells can balance pipeline stages, control logic, and data movement, while its large 676-terminal package supports multiple high-speed interfaces and parallel sensors. Because the -2L grade is screened for lower maximum static power, it is particularly useful in enclosed systems where sustained operating temperature matters. Layout should provide dense power vias and a broad thermal path under the lidless FCBGA, while signal-integrity checks should cover every high-speed interface routed through the 27 x 27 mm package.

📊

High-Speed Data Acquisition

The XC7K70T-L2FBG676E is appropriate for high-speed data-acquisition systems that must capture, align, and process multiple parallel channels in programmable logic. Its 65,600-cell Kintex-7 architecture provides capacity for acquisition pipelines, trigger logic, packing, and real-time filtering, while the 676-terminal package provides the I/O breadth needed for wide parallel buses and multiple high-speed transceivers. The device operates around a 1 V nominal core supply, requiring a carefully designed power-delivery network with very low impedance. Use the official AMD package files for ball placement and verify acquisition timing in the selected -2L speed grade rather than relying on nominal logic-cell counts alone.

📡

Software-Defined Radio Control and Modulation

Software-defined radio designs can use the XC7K70T-L2FBG676E for digital modulation, filtering, packetization, and control-plane functions that must coexist with external converters or RF front ends. The 65,600 logic cells allow parallel hardware to accelerate algorithms that would otherwise burden a processor, and the 676-terminal package supports rich parallel connectivity to converters, memory, and network interfaces. The -2L grade's lower-power screening is valuable in fixed and mobile installations where continuous duty cycles amplify thermal concerns. Designers should separate sensitive clock and data paths, validate every transceiver interface against the selected speed grade, and provide a robust thermal plane beneath the lidless package.

🖥️

Test and Measurement Instrumentation

The XC7K70T-L2FBG676E is well suited to programmable test and measurement equipment requiring parallel control, wide data capture, and deterministic hardware logic. It can implement sequencers, pattern generators, protocol analyzers, or real-time signal-processing blocks while retaining flexible software control through the FPGA toolchain. Its 65,600 logic cells allow more parallel channels than a small logic device, and the 676-terminal package leaves room for dense control, auxiliary I/O, and high-speed data paths. The lower-power -2L grade can simplify thermal design in compact desktop instruments. Validate clocking, pin constraints, and configuration schemes with the official AMD Kintex-7 documentation before layout release.

✈️

Aerospace and Defense Control Systems

The XC7K70T-L2FBG676E can support programmable control, monitoring, and data-processing functions in aerospace, defense, and high-reliability industrial systems where logic density and deterministic operation are essential. The 28 nm Kintex-7 implementation provides 65,600 programmable logic cells in a single 676-terminal package, enabling consolidation of multiple fixed-function blocks. Selection for a flight or mission-critical application requires confirmation of the exact ordering code, temperature grade, reliability documentation, radiation suitability, and procurement traceability. The -2L suffix should not be interpreted as automatic qualification for every aerospace program. Engineering teams must review the applicable AMD reliability and radiation documentation and the complete system safety requirements.

अनुशंसित उत्पादों का सारांश

XC7K70T-2FBG676E Same Kintex-7 device and package with the standard -2 speed grade उपयोग में: Communications Baseband Processing, Test and Measurement Instrumentation XC7K70T-2LFBG676E Same 676-terminal low-power Kintex-7 family configuration उपयोग में: Communications Baseband Processing, Software-Defined Radio Control and Modulation XC7K70T-2FBG676I AMD उपयोग में: Industrial Image and Vision Processing, High-Speed Data Acquisition, Test and Measurement Instrumentation, Aerospace and Defense Control Systems XC7K70T-1FBG676I AMD उपयोग में: Industrial Image and Vision Processing XC7K70T-2FBG676C AMD उपयोग में: High-Speed Data Acquisition, Aerospace and Defense Control Systems XC7K70T-1FBG676C AMD उपयोग में: Software-Defined Radio Control and Modulation
What is the AMD XC7K70T-L2FBG676E?
The AMD XC7K70T-L2FBG676E is a Kintex-7 FPGA with 65,600 programmable logic cells, 28 nm process technology, a 1 V nominal core supply, and a 676-terminal lidless FCBGA package. According to the AMD XC7K70T datasheet, the -2L grade is screened for lower maximum static power and can operate at lower core voltages than the standard -2 speed grade. The device is suited to high-density programmable logic, communications, industrial image processing, and high-speed data-acquisition systems.
What is the difference between the -L2 and -2 speed grades?
The -L2 grade is the lower-power Kintex-7 option, while -2 is the standard performance grade. The AMD XC7K70T datasheet states that -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power. The XC7K70T-L2FBG676E is therefore most appropriate when power control matters, while a standard -2 device remains the choice when maximum speed rather than minimum power is the primary requirement.
Where can I download the XC7K70T datasheet PDF?
The XC7K70T datasheet PDF is available through the AMD/Xilinx XC7K70T documentation listing and from the datasheets.com part-detail page for XC7K70T-L2FBG676E. Use the manufacturer document for final AC/DC timing, power, pin definitions, and package information. For PCB assignments, use the AMD Kintex-7 Package Device Pinout Files, which provide ASCII and CSV package files described in UG475. The Mouser and DigiKey product pages also link to the relevant device documentation.
Where can I find the XC7K70T-L2FBG676E pinout?
The official XC7K70T-L2FBG676E pinout is located in the AMD Kintex-7 Package Device Pinout Files and the corresponding XC7K70T data sheet. The package files contain ball assignments in TXT and CSV formats and follow the package-file format described in UG475. Because the device uses 676 terminals, do not rely on a generic BGA pin map; match the exact package code and order code before assigning tracks, vias, or power connections.
What are the key specifications of XC7K70T-L2FBG676E?
The principal XC7K70T-L2FBG676E specifications are 65,600 programmable logic cells, 28 nm process technology, a 1 V nominal core voltage, a 0.87 V to 0.93 V identified supply range, and a 676-terminal lidless FCBGA measuring 27 x 27 mm. The device uses the Kintex-7 -2L speed grade, which emphasizes lower static and dynamic power. Its large package and terminal count support designs requiring substantial programmable logic and high I/O connectivity.
Is XC7K70T-L2FBG676E suitable for industrial applications?
XC7K70T-L2FBG676E can be suitable for industrial equipment when its specified temperature range and reliability requirements are confirmed for the intended installation. The device is a 65,600-cell Kintex-7 FPGA built on 28 nm technology and offered in a 676-terminal lidless FCBGA. The lower-power -2L grade can benefit thermally constrained industrial systems, but enclosure temperature, airflow, board copper, and the exact temperature grade must be evaluated before production release.
What can replace the XC7K70T-L2FBG676E?
The closest drop-in candidates are other XC7K70T devices in the 676-terminal FBG package, including XC7K70T-2FBG676E, XC7K70T-2FBG676I, XC7K70T-2FBG676C, XC7K70T-1FBG676I, XC7K70T-1FBG676C, and XC7K70T-2LFBG676E. A replacement should match the BGA footprint, speed and temperature grades, voltage requirements, and configuration compatibility. Changing from -2L to -1 or -2 can alter timing, power, and temperature margins, so review the full datasheet before substitution.
Can XC7K70T-1FBG676C replace XC7K70T-L2FBG676E?
XC7K70T-1FBG676C can be considered a pin-compatible 676-terminal alternative, but it is not electrically and thermally equivalent. The -1 grade has a different performance and power profile from the -2L grade, and the C and E temperature suffixes also define different grade conditions. Use it when the board footprint matches and the design has sufficient timing, power, and temperature margin, and verify the new part's operating limits against system requirements.
What is the best AMD/Xilinx equivalent for XC7K70T-L2FBG676E?
The most practical AMD/Xilinx equivalent is another XC7K70T ordering code in the FBG676 package, such as XC7K70T-2FBG676E for the standard -2 speed grade or XC7K70T-1FBG676I for the -1 speed grade and industrial temperature class. These options retain the device family and package, but they are not all interchangeable without checking timing closure, static power, temperature range, and configuration details. No verified cross-manufacturer drop-in equivalent is established for this package.
When should I choose XC7K70T-L2FBG676E over another Kintex-7 grade?
Choose XC7K70T-L2FBG676E when the design needs the Kintex-7 device's 65,600 logic cells and high I/O capability while keeping core power under control. The -2L grade is screened for lower maximum static power and can operate at lower core voltages than the standard -2 grade. Select a standard -2 or -1 alternative instead when maximum speed is more important than power, or when the required temperature grade does not match the E suffix.
Is XC7K70T-L2FBG676E in stock?
Live inventory changes by supplier, package quantity, and market conditions, so check the current listing through the Request a Quote form on this page. Provide the exact ordering code XC7K70T-L2FBG676E, the required tray or reel quantity, and your target date. The manufacturer listing and distributor product records confirm the device, while current stock and lead time should be confirmed through a formal quotation.
What is the price of XC7K70T-L2FBG676E?
Pricing for the XC7K70T-L2FBG676E depends on quantity, date, and supply status, so use the Request a Quote form on this page for a current quotation. Submit the exact part number, desired package quantity, and required delivery schedule. This avoids relying on an outdated catalog figure and allows the quote to reflect current availability for this high-performance Kintex-7 FPGA.
What is the lead time for XC7K70T-L2FBG676E?
Lead time for XC7K70T-L2FBG676E should be confirmed for the requested quantity through the Request a Quote form on this page. FPGA supply can vary with allocation, configuration requirements, and package format. Include your forecast volumes and target production date in the request so the supplier can confirm allocation, current lead time, and whether the order is supplied as a tray or another authorized package form.
Where can I buy XC7K70T-L2FBG676E online?
XC7K70T-L2FBG676E can be requested through the Request a Quote form on this page. Include the exact MPN, package quantity, and required shipment date. The device is a 65,600-cell, 28 nm Kintex-7 FPGA in a 676-terminal lidless FCBGA, so authorized sourcing and traceability are important. A formal quote provides current commercial terms without tying the purchase decision to a stale distributor listing.
How should the 27 x 27 mm XC7K70T-L2FBG676E package be handled thermally?
Treat thermal management as a board-level design requirement because the XC7K70T-L2FBG676E uses a lidless 676-terminal FCBGA. Provide the recommended power and ground planes, dense via structures, and adequate copper beneath the device, then validate junction temperature in the finished enclosure. The -2L grade reduces power demand but does not remove the need for a low-impedance power-delivery network and reliable thermal paths.

के लिए इंजीनियरिंग संदर्भ डेटा XC7K70T-L2FBG676E — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the XC7K70T-L2FBG676E when the design requires 65,600 Kintex-7 logic cells, a high-pin-count FBG676 package, and the lower-power -2L grade. It is a good fit for communications, industrial vision, data acquisition, and instrumentation systems where sustained power and thermal performance matter. Select XC7K70T-2FBG676E or XC7K70T-2FBG676I when maximum -2 performance is preferable to the lower-power -2L behavior, provided timing and temperature requirements are checked. Choose XC7K70T-1FBG676I or XC7K70T-1FBG676C when the design has sufficient timing margin and a less demanding power-performance target. All listed alternatives retain the FBG676 footprint, but speed grade, temperature class, configuration, and timing constraints can prevent unqualified substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XC7K70T-2FBG676E XC7K70T-2FBG676I XC7K70T-1FBG676I
Brand AMD AMD AMD AMD
Package 676-terminal lidless FCBGA (S-PBGA-B676) 676-terminal lidless FCBGA (S-PBGA-B676) 676-terminal lidless FCBGA (S-PBGA-B676) 676-terminal lidless FCBGA (S-PBGA-B676)
Programmable Logic Cells 65,600 cells 65,600 cells 65,600 cells 65,600 cells
Process Technology 28 nm 28 nm 28 nm 28 nm
Speed Grade -2L low-power speed grade -2 standard speed grade -2 standard speed grade -1 speed grade
Nominal Core Supply 1 V 1 V 1 V 1 V
Temperature-Grade Suffix E suffix E suffix I suffix I suffix
Package Dimensions 27 x 27 mm 27 x 27 mm 27 x 27 mm 27 x 27 mm

मुख्य विशेषताएँ

  • Lower-power speed grade within the Kintex-7 family (बनामXC7K70T-2FBG676E)
  • Same-package route for power-sensitive upgrade paths (बनामXC7K70T-2FBG676I)
  • Lower speed grade option for cost-sensitive timing designs (बनामXC7K70T-1FBG676I)
  • Identical package dimensions simplify footprint reuse (बनामXC7K70T-2FBG676C)

डिज़ाइन नोट्स

The XC7K70T-L2FBG676E uses a lidless 27 x 27 mm FCBGA, so heat must leave through the solder balls, package substrate, vias, and PCB copper. Follow the AMD package guidance for layer count, via placement, and thermal-via arrays. The -2L grade reduces static-power demand but does not remove the need for a low-resistance thermal path. Validate peak junction temperature in the final enclosure because the internal package temperature can be higher than the PCB surface temperature.

Separate the 1 V core supply from all required I/O supplies and use the power-decoupling and plane connections specified in the AMD XC7K70T documentation. Place bulk and high-frequency decoupling capacitance close to the device supply and ground balls, and keep supply-return paths short. Do not infer permitted supply voltages for every I/O bank from the identified 0.87 V to 0.93 V core range; confirm each bank configuration and voltage directly against the data sheet.

Assign all 676 terminals using the official AMD Kintex-7 Package Device Pinout Files and UG475 rather than a generic BGA symbol. The package files include TXT and CSV assignments for the exact device package. Apply the manufacturer's ball-pad, solder-mask, and paste recommendations during PCB footprint creation, and reserve no-net and special-purpose balls exactly as shown in the official data. This prevents silent routing conflicts caused by using a superficially similar FBG package.

Route high-speed interfaces as short, controlled-impedance paths with continuous reference planes and avoid splits across plane boundaries. Keep clocks away from noisy switching nodes, include matching reference vias at layer transitions, and validate length and loss budgets against the selected I/O standard. Because all alternatives remain in the same dense FBG676 footprint, PCB reuse is possible, but timing constraints and I/O voltage compatibility still require separate verification for each speed or temperature grade.

Do not treat XC7K70T-1, XC7K70T-2, and XC7K70T-L2 orderings as automatically interchangeable. The speed grade changes achievable timing and power characteristics, while the E, I, and C suffixes identify different temperature classes. Changing the -2L grade to -1 or -2 can require timing-constraint changes and power-budget updates. Also verify that configuration memories, startup behavior, and any security requirements remain valid after any suffix change.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available part documentation identifies the device, package, process technology, and power characteristics but does not state the requested compliance declarations.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

XC7K70T datasheet XC7K70T-L2FBG676E datasheet XC7K70T-L2FBG676E specifications XC7K70T-L2FBG676E pinout XC7K70T-L2FBG676E equivalent XC7K70T-L2FBG676E replacement XC7K70T 1FBG484C XC7K70T 1FBG676I XC7K70T 2FBG484I XC7K70T 1FBG676C XC7K70T 1FBG484I XC7K70T 2FBG676I XC7K70T FBG676 XC7K70T 2FBG676C AMD Kintex-7 XC7K70T-L2FBG676E

संबंधित कंपोनेंट्स और शब्द

AMD Xilinx XC7K70T-L2FBG676E XC7K70T-2FBG676E XC7K70T-2FBG676I XC7K70T-2FBG676C XC7K70T-1FBG676I XC7K70T-1FBG676C XC7K70T-2LFBG676E Kintex-7 FPGA field-programmable gate array programmable logic device 28 nm process technology 65,600 programmable logic cells 676-terminal lidless FCBGA S-PBGA-B676 UG475 lower static power lower dynamic power 1 V core supply communications baseband industrial image processing software-defined radio high-speed data acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें