מוצרים (44,000+)

PCM1604Y/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments
PCM1604Y/2K

PCM1604Y/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments

The Texas Instruments PCM1604Y/2K is a 24-bit, 6-channel enhanced multilevel delta-sigma digital-to-analog converter designed for high-fidelity multichannel audio. It supports sampling rates up to 192 kHz and is packaged in a 48-pin LQFP measuring 7 mm by 7 mm. The converter provides a typical dynamic range of 105 dB, typical signal-to-noise ratio of 104 dB, and typical total harmonic distortion plus noise of 0.0018%. A digital-to-analog converter, or DAC, converts digital audio samples into proportional analog voltages or currents. A multi-channel DAC supports several independent audio outputs within one package, reducing the component count required for surround-sound, active-speaker, professional-audio, and multimedia systems. Within the broader hierarchy, this device is an audio DAC, an analog and mixed-signal data-conversion IC, and a semiconductor used in professional audio and consumer electronics. The PCM1604Y/2K provides six DAC channels with 24-bit resolution and a maximum sampling frequency of 192 kHz. Its enhanced multilevel delta-sigma architecture is intended to combine high-resolution reconstruction with a compact integrated audio-conversion solution. Typical performance includes 105 dB dynamic range, 104 dB SNR, and 0.0018% THD+N, making the device relevant to designs where low distortion and broad dynamic range influence audibility, headroom, or signal-chain fidelity. The converter is implemented in CMOS and uses a gull-wing, square 48-pin LFQFP package. The 7 mm by 7 mm LQFP footprint provides accessible leads for conventional PCB assembly and inspection. Because this is a multichannel analog output device, PCB implementation must account for clean supply distribution, a stable analog ground reference, correct output-filter implementation, and separation between digital clock and data signals and sensitive analog output nodes. Typical uses include home-theater surround-sound systems, powered loudspeakers, professional mixing consoles, multichannel audio interfaces, digital mixing desks, and active speaker crossover networks. Six integrated channels can also simplify channel-balanced designs compared with discrete single-channel converters. System designers should still verify the required interface mode, digital audio format, output topology, sampling rate, and external filter characteristics against the manufacturer datasheet before finalizing the circuit. The primary design consideration is maintaining clean reference and analog-output behavior. Follow the manufacturer pin-description table when assigning every LQFP lead, and implement the specified analog and digital supply connections and decoupling arrangement. Keep sensitive analog traces short, maintain a continuous ground reference, and place output-network components close to their associated converter pins where the reference circuit permits. This page combines technical specifications, application guidance, practical design considerations, package details, and drop-in replacement analysis in a compact engineering reference. It is intended to help designers evaluate the PCM1604Y/2K for multichannel audio systems while also identifying where an alternative offers a meaningful functional or packaging difference.

RFQ צור קשר
PCM1605Y - 24-Bit 6-Ch Audio DAC | Texas Instruments
PCM1605Y

PCM1605Y - 24-Bit 6-Ch Audio DAC | Texas Instruments

The Texas Instruments PCM1605Y is a 24-bit, six-channel, enhanced multilevel delta-sigma digital-to-analog converter with a sampling rate of up to 192 kHz, supplied in a 48-pin MQFP package measuring 12 mm by 12 mm. It is designed for high-fidelity multichannel audio systems requiring six independent analog output channels, serial digital audio input, and a compact surface-mount implementation. An audio DAC is a converter in the signal-chain hierarchy known as a data converter and analog-to-digital or digital-to-analog interface IC. Its purpose is to transform digital audio samples into analog voltage signals suitable for headphone, line, speaker, or power-amplifier stages. The PCM1605Y combines a 24-bit resolution, six-channel architecture, and enhanced multilevel delta-sigma conversion in a single package. The verified product information identifies a typical dynamic range of 105 dB, a typical signal-to-noise ratio of 104 dB, and typical total harmonic distortion plus noise of 0.0018%. These figures make the converter suitable for consumer audio, home-theater, musical-instrument, and digital audio equipment where multiple channels must share a consistent converter architecture. A distributor listing also identifies the device as supporting I2S-format serial audio data. The PCM1605Y accepts serial digital audio information and provides six analog output channels, reducing the need for separate single-channel converters in multichannel equipment. Its 192 kHz capability supports high-resolution PCM source material, while the 24-bit data interface preserves the numerical depth of the incoming samples. The enhanced multilevel delta-sigma architecture is intended to shape quantization noise away from the audio band. Typical applications include surround-sound receivers, multichannel DVD and Blu-ray audio systems, active speakers, professional music equipment, digital mixing consoles, and automotive or industrial audio modules. In each case, the converter is placed after the digital audio source and before balanced or single-ended line-output circuitry, where it reconstructs the analog waveform from the incoming PCM stream. Designers should treat the analog outputs as sensitive signal nodes and follow the manufacturer’s reference layout for power, ground, digital inputs, and output stages. Adequate decoupling, controlled return paths, and a clean analog supply are important because they can affect the converter’s measured noise and distortion. The verified data does not provide the complete pin map or analog output circuitry, so those details must be confirmed in the manufacturer datasheet before layout. This page consolidates verified distributor specifications, package information, application guidance, comparison parameters, and sourcing considerations. It also distinguishes verified facts from parameters that remain unavailable, helping engineers evaluate PCM1605Y without relying on guessed electrical values or unsupported drop-in claims.

RFQ צור קשר
PCM1606E - 24-Bit 6-Ch Audio DAC | Texas Instruments
PCM1606E

PCM1606E - 24-Bit 6-Ch Audio DAC | Texas Instruments

The Texas Instruments PCM1606E is a 24-bit, 6-channel enhanced multilevel delta-sigma digital-to-analog converter for high-quality audio systems. It supports 192 kHz sampling with a distributor-rated maximum sampling rate of 200 kHz, provides a typical dynamic range and SNR of 103 dB, and delivers typical THD+N of 0.004%. The device uses an I2S serial interface and is offered in a 20-pin SSOP package. A digital-to-analog converter, or DAC, converts digital audio samples into corresponding analog voltage signals. The PCM1606E belongs to the delta-sigma DAC family within the broader mixed-signal IC and audio converter hierarchy. Its six-channel architecture supports simultaneous or multiplexed reproduction of multiple audio channels, while the enhanced multilevel delta-sigma architecture reduces quantization-related distortion compared with a basic single-bit delta-sigma converter. Key performance features include 24-bit resolution, 192 kHz sampling, 103 dB typical dynamic range, 103 dB typical SNR, and 0.004% typical THD+N. The converter uses 8-times oversampling interpolation and produces a typical full-scale output of 3.1 Vp-p. Its 4.5 V to 5.5 V supply range suits conventional 5 V audio equipment, while the I2S interface supports direct connection to suitable digital audio processors. The PCM1606E is designed for multichannel audio conversion where six channels and high-resolution reproduction are required. Its 103 dB SNR and 0.004% THD+N are particularly relevant to preamplifiers, powered speakers, home-theater equipment, and professional audio products. The 20-pin SSOP package supports compact surface-mount assembly but requires careful analog and digital layout to preserve performance. Typical applications include 5.1-channel home-theater DAC boards, multichannel preamplifiers, digital audio consoles, powered-speaker crossover boards, active speaker networks, and high-resolution audio playback equipment. An I2S source supplies the PCM stream, and the analog outputs provide six full-scale audio channels for subsequent amplification or line-level processing. Designers should provide stable 5 V analog and digital supplies, place decoupling capacitors close to the supply pins, and follow the manufacturer datasheet layout for the analog output, clock, and I2S signals. The operating voltage must remain between 4.5 V and 5.5 V, while clocking and digital-interface timing should satisfy the published PCM1606E requirements. This product page consolidates verified distributor specifications, sourcing information, application guidance, and the available pin-compatible alternative. It also distinguishes confirmed data from parameters that require validation against the manufacturer datasheet before a new PCB layout or production release is approved.

RFQ צור קשר
PCM1606E/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments
PCM1606E/2K

PCM1606E/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments

The Texas Instruments PCM1606E/2K is a six-channel, 24-bit enhanced multilevel delta-sigma audio digital-to-analog converter with support for 192 kHz sampling and I2S input in a 20-lead SSOP package. It converts six digital audio channels into simultaneous analog outputs for multichannel audio equipment. An audio DAC is a mixed-signal semiconductor that reconstructs continuous analog voltage signals from digital audio samples. Within the signal chain, a digital-to-analog converter sits after the processor, decoder, or digital audio source and before the output amplifier and speaker system. The PCM1606E/2K is therefore a special-purpose interface IC within the broader ADC/DAC category, combining digital input, clocking, noise-shaping conversion, analog output, and support circuitry. The principal features are six DAC channels, 24-bit resolution, operation up to 192 kHz, and an I2S-compatible digital audio interface. Its 20-SSOP package supports compact multichannel designs while exposing separate analog outputs for six channels. The /2K ordering code identifies the manufacturer's specified package, temperature, and lead-free configuration. For new layouts, the pin-description and test-information tables in the manufacturer datasheet should govern track assignment and analog-output routing. The enhanced multilevel delta-sigma architecture uses noise shaping to move quantization noise away from the audio band. This approach supports high-resolution digital audio reconstruction while maintaining a conventional external-interface and analog-output implementation. Multiple converters operating from common digital data and clock signals reduce the need for separate discrete DACs when a system requires synchronized six-channel playback. Typical uses include surround-sound receivers, home-theater audio processors, active speaker systems, digital mixing consoles, automotive infotainment units, and professional monitoring equipment. The six-channel architecture is particularly useful when one subsystem must produce synchronized left, right, center, surround, and additional channel outputs without deploying separate converter packages. Power-supply and ground planning are central to preserving converter performance. Place the decoupling network close to the supply pins, maintain the layout recommended by the manufacturer datasheet, and keep analog output routing away from high-current digital return paths. Verify output filtering and analog gain settings against the intended sampling rate before fixing the audio signal chain. This page consolidates the PCM1606E/2K package, interface, channel, resolution, and sampling-rate characteristics with practical replacement guidance, comparison information, and PCB-focused design notes to support component selection and board bring-up.

RFQ צור קשר
PCM1608KY - 8-Channel 24-Bit 192kHz DAC | Texas Instruments
PCM1608KY

PCM1608KY - 8-Channel 24-Bit 192kHz DAC | Texas Instruments

Texas Instruments PCM1608KY is an 8-channel, 24-bit, 192kHz CMOS digital-to-analog converter with an I2S-compatible digital audio interface, housed in a 48-pin LQFP package measuring 7mm by 7mm. Its eight DAC channels use enhanced multilevel delta-sigma modulation with fourth-order noise shaping and 8-level amplitude quantization to provide high-quality audio output while tolerating clocking and data-format variations. An audio DAC is a power-management and signal-conversion semiconductor that converts digital audio samples into continuous analog voltage signals. In the broader hierarchy, PCM1608KY belongs to the digital-to-analog converter family, then to audio converter ICs, interface and signal-conversion ICs, and finally the broader semiconductor category. It is commonly positioned after a digital audio processor, where parallel or serial digital audio data is converted into eight analog output channels for amplification, recording, mixing, or powered speakers. The principal specifications are an eight-channel DAC configuration, 24-bit audio resolution, a 192kHz maximum sampling rate, and an I2S-compatible interface. The monolithic CMOS implementation consolidates eight converters and their associated support circuitry into one package. This channel count makes the device useful in multichannel audio systems where replicating eight separate high-resolution DAC channels would otherwise increase board area, routing complexity, and assembly cost. The enhanced multilevel delta-sigma architecture uses fourth-order noise shaping and 8-level amplitude quantization. Noise shaping moves quantization noise away from the most perceptually important portion of the audio band, while multilevel quantization helps improve tolerance to clock jitter and reduces sensitivity to input timing variation. The device supports both PCM audio data and Direct Stream Digital audio data formats, giving designers flexibility when connecting digital sources, AV receivers, music servers, or networked audio platforms. Typical applications include home-theater audio, multichannel soundbars, professional audio mixers, digital recording equipment, active speakers, and automotive or embedded audio systems. The 48-LQFP package provides a conventional surface-mount assembly format, while its exposed thermal-pad construction supports heat transfer through the PCB when multiple channels operate continuously at high sample rates. PCB design should preserve short, impedance-controlled connections among the digital interface, clocking circuitry, analog outputs, and decoupling network. Place input and output capacitors at their associated pins, route analog outputs away from switching nodes, and use a solid ground-plane strategy to reduce channel-to-channel crosstalk. Confirm analog output loading, supported master-clock arrangements, and output-filter values against the manufacturer datasheet before finalizing the board. This product record combines the manufacturer architecture description, package and sampling-rate details, verified distributor listings, practical application guidance, and a clearly constrained replacement assessment. That combination helps engineers evaluate the PCM1608KY for multichannel audio designs while distinguishing verified pin-compatible alternatives from parts that merely perform a similar conversion function.

RFQ צור קשר
PCM1608Y 8-Channel 24-Bit 192kHz Audio DAC | Texas Instruments
PCM1608Y

PCM1608Y 8-Channel 24-Bit 192kHz Audio DAC | Texas Instruments

The Texas Instruments PCM1608Y is a CMOS monolithic 8-channel digital-to-analog converter supporting 24-bit audio resolution, operation up to 192 kHz, I2S digital audio, PCM audio data, and direct stream digital (DSD) audio data. The device is packaged in a 48-pin LQFP measuring 7 mm by 7 mm and provides a typical dynamic range of 100 dB for PCM1608Y. An audio DAC is a signal-conversion integrated circuit that reconstructs analog waveforms from sampled digital audio data. The PCM1608 belongs to the delta-sigma DAC hierarchy within digital-to-analog converters, ADC/DAC components, and broader data-converter semiconductors. Eight integrated converter channels allow a single device to drive multiple analog audio outputs while accepting digital audio streams from an audio processor, decoder, receiver, or playback system. The primary features of PCM1608Y are its eight DAC channels, 24-bit conversion resolution, and 192 kHz maximum sampling rate. Its digital interface supports I2S as identified by distributor product data, while the manufacturer describes support for both PCM audio data and DSD audio data. The 48-LQFP (7x7) package consolidates eight converter channels and associated support circuitry into a surface-mount footprint suitable for multichannel consumer and professional audio equipment. The PCM1608 uses delta-sigma conversion according to the manufacturer datasheet listing. This architecture is relevant to audio because it supports high-resolution digital audio while presenting the external circuit with a single integrated converter package. The verified product data identifies the PCM1608Y dynamic range as 100 dB typical, whereas the related PCM1608 family listing also references a 105 dB typical value; these figures should not be interchanged without checking the specific ordering variant. Typical applications include surround-sound decoding, multichannel home-theater playback, active loudspeaker systems, digital mixing consoles, professional audio interfaces, and consumer receivers. In these systems, the PCM1608 can convert decoded I2S audio into eight analog output channels. System-level performance still depends on the analog reconstruction network, clock source, digital interface implementation, output loading, grounding, and power-supply quality. Layout should preserve short digital and analog signal paths, maintain a clean analog ground reference, and place required bypass and reconstruction components close to the device. The verified data does not disclose the complete pin assignment or component values, so engineers should use the current Texas Instruments datasheet and associated application information before finalizing PCB routing, decoupling, or analog output stages. This product page combines verified manufacturer and distributor information, current as of 2026-10-30, with explicit data gaps, sourcing guidance, and practical selection criteria. It distinguishes confirmed PCM1608Y characteristics from unverified family-level or competitor information so engineers can make sourcing and design decisions without relying on unsupported specification assumptions.

RFQ צור קשר
PCM1681PWP - 8-Channel 24-Bit 192kHz Audio DAC | TI
PCM1681PWP

PCM1681PWP - 8-Channel 24-Bit 192kHz Audio DAC | TI

The Texas Instruments PCM1681PWP is an 8-channel, 24-bit audio digital-to-analog converter with a maximum sampling rate of 192 kHz and 105 dB signal-to-noise ratio, housed in a 28-pin HTSSOP PowerPAD package. It supports I2S and TDM audio interfaces and is designed for multichannel audio systems requiring eight synchronized DAC channels in one compact device. An audio DAC is a signal-conversion component that converts digital audio samples into analog voltages suitable for amplification, mixing, line-level processing, or loudspeaker drive stages. Within the broader product hierarchy, the PCM1681PWP is an audio DAC, a digital-to-analog converter, a data-conversion IC, and ultimately a semiconductor designed for professional and consumer audio signal paths. The device provides eight 24-bit conversion channels, 192 kHz sampling capability, and 105 dB SNR. Its I2S interface supports conventional stereo-oriented serial audio arrangements, while TDM mode expands the serial data path for multichannel configurations. The 28-lead HTSSOP PowerPAD package integrates the converter and support circuitry into a surface-mount footprint while providing a thermal pad for improved heat dissipation. Texas Instruments describes the PCM1681 as a CMOS monolithic integrated circuit using Burr-Brown enhanced multilevel delta-sigma architecture. This architecture provides high-resolution conversion and high tolerance to clock jitter. The manufacturer also identifies I2S and TDM operation, making the device suitable for systems that require flexible channel serialization and synchronized multichannel playback. Typical uses include surround-sound audio receivers, multichannel home-theater equipment, professional mixers, digital television systems, automotive infotainment platforms, and other audio products requiring eight DAC channels. The 192 kHz rate supports high-resolution audio streams, while the 105 dB SNR specification is appropriate for low-noise playback and signal-chain designs. PCB implementation should prioritize short, impedance-controlled serial-data and clock routes, solid analog grounding, and correct decoupling around the power terminals. The exposed thermal pad requires a manufacturer-compatible land pattern and adequate copper area because sustained conversion activity can dissipate heat. Audio clocks should be clean and jitter-resistant to preserve the benefit of the converter architecture. This page organizes the exact PCM1681PWP ordering information, package details, interface capabilities, engineering considerations, and same-family replacement choices into one practical reference. It also distinguishes documented functions from parameters that still require confirmation from the manufacturer datasheet, helping engineers plan sourcing and circuit reviews without overlooking footprint or timing constraints.

RFQ צור קשר
PCM1691DCA - 24-Bit 192kHz 8-Channel Audio DAC | Texas Instruments
PCM1691DCA

PCM1691DCA - 24-Bit 192kHz 8-Channel Audio DAC | Texas Instruments

Texas Instruments PCM1691DCA is a 24-bit, 192 kHz sampling, eight-channel audio digital-to-analog converter housed in a 48-pin HTSSOP package. It operates from a 4.5 V to 5.5 V supply and supports I2S digital audio input through an integrated DSP interface. The converter architecture provides eight analog outputs for multichannel audio equipment, including surround-sound receivers, professional mixers, home-theater systems, and powered speakers. An audio DAC is a digital-to-analog converter, a member of the broader signal-conversion and data-conversion IC hierarchy. It receives digital audio samples from a processor, codec, receiver, or digital audio interface and reconstructs corresponding analog voltages for amplifiers, speakers, headphones, or line-level equipment. The PCM1691DCA combines an eight-channel output stage with configurable digital audio processing, making it suitable for designs requiring multiple synchronized analog channels from one converter. The principal operating specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, eight audio channels, and a 4.5 V to 5.5 V analog and digital supply range. Its I2S interface is intended for receiving serial PCM audio data from a digital audio host. The 48-pin HTSSOP package supports dense, surface-mount multichannel audio designs while exposing the converter's digital, analog, clock, and power connections. The PCM1691DCA is positioned for high-resolution multichannel audio rather than single-channel playback. Eight integrated DAC channels reduce the number of external converter packages required for surround-sound and multichannel mixer architectures. Operation at up to 192 kHz supports high-resolution source material, while 24-bit word length provides the numerical resolution required by professional and premium consumer audio systems. Typical uses include 7.1-channel home-theater receivers, multichannel digital mixers, active speaker systems, broadcast and studio monitoring equipment, and consumer AV processors. The eight outputs can also implement less conventional channel arrangements where independent analog playback paths are useful. System clocking, digital-audio routing, mute behavior, analog output filtering, and ground management remain central to achieving reliable performance. For layout, place decoupling capacitors near the supply pins and route the I2S, clock, and data traces away from sensitive analog output paths. Confirm that the host controller supports the required sampling rate, bit depth, and serial format. Component values for output filtering and clock synchronization should follow the manufacturer datasheet and reference layouts rather than general-purpose substitutions. This product page combines converter specifications, drop-in family alternatives, application guidance, and PCB design considerations. The comparison tables also clarify package and interface differences among verified replacements, helping engineers select a compatible revision before committing a 48-pin multichannel audio design to production.

RFQ צור קשר
PCM1702PG4 - 20-Bit 768 kSPS Audio DAC | Texas Instruments
PCM1702PG4

PCM1702PG4 - 20-Bit 768 kSPS Audio DAC | Texas Instruments

The Texas Instruments PCM1702PG4 is a precision 20-bit, single-channel digital-to-analog converter designed for professional audio equipment, with a maximum conversion rate of 768 kSPS and bipolar analog output in a 16-pin through-hole DIP package. It operates from dual ±4.75 V to ±5.25 V analog supplies and accepts serial digital audio data. The converter supports 44.1 kHz audio and is specified to deliver low full-scale distortion of -96 dB typical. A digital-to-analog converter, or DAC, converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter, audio converter, data-converter IC, and mixed-signal semiconductor hierarchy. Its role in an audio signal chain is to reconstruct a left, right, or other discrete analog channel from a digital bitstream while preserving low distortion around bipolar zero. The PCM1702 uses advanced sign-magnitude architecture to reduce unwanted glitches and nonlinear transitions near zero. Its principal characteristics include 20-bit resolution, a maximum sample rate of 768 kSPS, serial digital input, and approximately -96 dB typical full-scale distortion. These specifications make it suitable for high-resolution CD-audio playback, professional digital mixing consoles, digital instruments, studio monitors, and other equipment requiring a discrete high-resolution audio output channel. Because the device uses a bipolar output architecture, its analog section requires positive and negative supply rails. The documented operating range is approximately ±4.75 V to ±5.25 V, while its analog output is referenced to ground through the application network. The 16-pin DIP package favors through-hole construction and makes the converter suitable for legacy audio boards, repair assemblies, and designs where a surface-mount package would be inconvenient. In a typical audio path, a digital audio controller or receiver supplies serial data and a master clock to the PCM1702. The converter then drives a balanced or unbalanced output stage through the appropriate coupling, filtering, and impedance-matching network. Attention must be paid to clock timing, digital data format, analog supply cleanliness, output loading, and the required output filtering because those details strongly influence distortion and signal integrity. The PCM1702PG4 is best considered when an existing design specifically calls for a 16-pin DIP audio DAC and its clock, supply, and serial interface requirements align with the target board. Before substituting another device, verify the complete pinout, digital timing, analog output topology, supply rails, and package dimensions rather than relying only on bit depth and sample rate. This product record combines the converter's core electrical and packaging characteristics with application guidance, practical design considerations, and verified same-package alternatives. It is intended to help engineers identify whether the PCM1702PG4 fits an audio-conversion, repair, or upgrade requirement before committing to a board-level implementation.

RFQ צור קשר
PCM1702U - 20-Bit 44.1kHz Audio DAC | Texas Instruments
PCM1702U

PCM1702U - 20-Bit 44.1kHz Audio DAC | Texas Instruments

The Texas Instruments PCM1702U is a precision 20-bit serial audio digital-to-analog converter featuring a 44.1 kHz sampling rate, advanced sign-magnitude BiCMOS architecture, and a 20-pin SOIC package. Its headline specifications include -96 dB typical full-scale THD+N, 120 dB typical A-weighted SNR, and glitch-free operation near bipolar zero. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage or current that can drive downstream amplifiers, headphones, mixers, or loudspeaker systems. Within the broader component hierarchy, the PCM1702U is an audio DAC, a member of the data-converter family, and ultimately a semiconductor designed to bridge digital signal-processing systems with analog audio outputs. The principal feature of the PCM1702U is its advanced sign-magnitude architecture, which is designed to suppress unwanted glitches and nonlinear transitions around bipolar zero. The manufacturer datasheet also identifies an industry-standard serial interface, 20-bit resolution, and low-noise performance. Its -96 dB typical THD+N is specified with a full-scale output and without external adjustment, indicating that the core distortion performance does not depend on a user-supplied trim procedure. The device combines a BiCMOS implementation with a fast-settling output architecture. These characteristics are relevant when converting sequential digital audio data into a smooth analog waveform, particularly near zero crossings where conventional converter architectures may exhibit glitching. The serial format supports integration with digital audio processors while the analog output is intended for subsequent signal conditioning rather than direct loudspeaker drive. Typical uses include CD-player and digital-audio source designs, professional audio interface signal paths, digital mixing consoles, sampling systems, and other equipment requiring a high-resolution DAC. The 44.1 kHz capability directly matches the standard rate used by CD audio, while higher-rate source equipment can use the converter only if its upstream clocking and filtering architecture permits the intended operating rate. Designers should preserve the required analog and digital supply arrangements, use suitable output coupling or load circuitry, and validate the complete signal path rather than relying only on the converter's headline distortion figure. The verified excerpts do not provide the complete pin names, output mode, voltage references, supply limits, or recommended application circuit, so those implementation details must be confirmed in the manufacturer datasheet before layout. This page combines verified manufacturer-datasheet characteristics, distributor metadata, lifecycle information, application guidance, and drop-in alternatives into an engineering-focused selection reference. It also clearly identifies unavailable parameters instead of estimating them, allowing designers to distinguish documented performance from information that still requires circuit-level verification.

RFQ צור קשר
PCM1702U-J - 20-Bit Audio DAC | Texas Instruments
PCM1702U-J

PCM1702U-J - 20-Bit Audio DAC | Texas Instruments

Texas Instruments PCM1702U-J is a precision 20-bit digital-to-analog converter designed for audio signal generation in a 20-pin SOIC package. It accepts industry-standard serial audio data, supports 44.1 kHz operation, and uses a BiCMOS process with advanced sign-magnitude architecture to reduce unwanted glitches and nonlinearities around bipolar zero. The converter provides -96 dB typical THD+N at full-scale output and 120 dB typical A-weighted SNR, according to the manufacturer datasheet. A digital-to-analog converter, or DAC, is an interface IC that converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter category, which sits within data converters, interface ICs, and semiconductor signal-chain components. In a CD player, network audio receiver, digital mixer, or digital audio source, it typically receives interleaved serial data and clock signals, then reconstructs the left and right analog channels through an external output stage. The PCM1702U-J supports 20-bit audio resolution and 44.1 kHz sampling. Its advanced sign-magnitude architecture is intended to suppress glitch energy when the digital signal crosses zero, improving perceived cleanliness during low-level passages and digital silence transitions. The manufacturer also describes fast settling current as a feature of the converter family. These characteristics make the device relevant to high-fidelity audio designs where low distortion and low-level signal integrity matter. The BiCMOS implementation combines bipolar and CMOS technologies, a construction commonly used in audio converters to balance analog output performance with digital-interface functionality. The PCM1702 family uses an industry-standard serial audio interface, allowing it to operate with suitable source and transport circuitry. Digital input routing, clocking, de-emphasis filtering, and output-stage design remain external to the converter and must be designed according to the manufacturer application guidance. Typical uses include CD and digital-audio transport boards, stereo DAC modules, digital mixing consoles, home-theater audio equipment, and embedded digital audio sources. The converter is especially appropriate when a design requires a discrete, high-resolution stereo audio DAC rather than a codec combining conversion with microphone amplification or other mixed-signal functions. The most important design consideration is preserving a clean analog path after the DAC. Short output traces, suitable ground-return planning, correctly selected reconstruction and load networks, and stable clocking help retain the converter’s low-distortion performance. Decoupling capacitors should be placed close to their supply pins, and unused inputs should follow the pin-description table in the manufacturer datasheet. This page consolidates the PCM1702U-J datasheet specifications, package details, sourcing questions, comparison parameters, and practical integration notes. It also distinguishes documented drop-in family variants from newer redesign alternatives so engineers can identify whether PCB reuse is realistic or a redesigned audio architecture is required.

RFQ צור קשר
PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments
PCM1702U/2K

PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1702U/2K is a precision 20-bit stereo digital-to-analog converter with a maximum sampling rate of 44.1 kHz, a serial digital interface, and dual analog outputs in a 20-pin SOIC package. The converter uses BiCMOS circuitry and an advanced sign-magnitude architecture to suppress unwanted glitches and nonlinear distortion around bipolar zero. An audio DAC is a data converter that accepts digital audio samples and generates proportional analog voltages or currents suitable for audio amplification. In the signal-chain hierarchy, the PCM1702 belongs to the digital-to-analog converter class, the broader ADC/DAC category, and ultimately the semiconductor and audio-signal-conversion markets. It is intended for designs requiring precise conversion of CD-audio-format data into left and right analog channels. Key characteristics include 20-bit resolution, 44.1 kHz sampling support, dual-channel operation, a serial interface, and low-power bipolar analog output stages. According to the manufacturer datasheet, full-scale distortion is typically -96 dB and signal-to-noise ratio is typically 120 dB when measured with the A-weighted method. The sign-magnitude architecture improves behavior near zero, while the short 0.2 microsecond settling time supports accurate reconstruction of sampled audio waveforms. The PCM1702 family provides separate analog, digital, and ground connections that support careful partitioning of sensitive signal paths. Its serial input reduces the number of data connections compared with a parallel interface, simplifying routing on a compact audio board. Because this is a bipolar-output converter, the associated output stage and analog supply design materially influence channel balance, noise, and achievable distortion performance. Typical applications include CD player and digital-audio transport boards, high-fidelity stereo DAC products, professional audio equipment, and digital mixers requiring a dedicated 20-bit stereo conversion stage. It can also be used in instrumentation or communications equipment when its specified 44.1 kHz rate and low-noise bipolar output are appropriate. The primary design consideration is analog supply and output conditioning. Follow the manufacturer datasheet for decoupling, output filtering, grounding, and component selection around the DAC pins. Treat the converter and its analog output path as a high-accuracy measurement chain rather than as a generic logic output. This product page combines the converter's principal electrical characteristics, verified package information, family drop-in options, comparison parameters, and practical application guidance. It is intended to help engineers evaluate the PCM1702U/2K for legacy and new high-fidelity audio designs.

RFQ צור קשר
PCM1702UE6 - 20-Bit Audio DAC | Texas Instruments | SOIC-20
PCM1702UE6

PCM1702UE6 - 20-Bit Audio DAC | Texas Instruments | SOIC-20

Texas Instruments PCM1702UE6 is a precision 20-bit digital-to-analog converter designed for audio signal generation, with a 44.1 kHz serial interface and a 20-pin SOIC package. The BiCMOS advanced sign-magnitude architecture is designed to reduce unwanted glitches and nonlinearities around bipolar zero, while the specified full-scale distortion reaches -96 dB typical. An audio digital-to-analog converter, or DAC, converts sampled digital audio into an analog voltage suitable for audio amplification. The PCM1702 belongs to the broader ADC/DAC and signal-conversion hierarchy, where it serves as the analog-output stage between a digital audio source and a line-level amplifier. Its serial interface reduces the number of interconnects compared with a parallel DAC and supports compact digital audio equipment layouts. The principal features of the PCM1702UE6 include 20-bit conversion resolution, a 44.1 kHz sampling interface, BiCMOS construction, and the advanced sign-magnitude architecture. These attributes make the converter suitable for CD-player-style digital audio paths, consumer audio equipment, and other systems requiring accurate reconstruction of a bipolar audio waveform. The 20-SO package also supports conventional surface-mount assembly rather than through-hole insertion. Technical performance is centered on low waveform distortion near full-scale output. The manufacturer describes a typical full-scale distortion of -96 dB and emphasizes the sign-magnitude architecture for glitch suppression around zero. These characteristics are especially relevant where low-level audio details, stable channel balance, and absence of transition artifacts influence perceived signal quality. Typical applications include digital audio playback, CD-ROM audio outputs, multimedia equipment, and external digital-to-analog conversion stages. In these systems, the PCM1702UE6 receives serialized digital samples, reconstructs the analog waveform, and drives a subsequent audio amplifier. System designers should pay particular attention to output filtering, grounding, digital-interface timing, and power-supply cleanliness. A key design consideration is that this converter is obsolete, so a new production design should normally use a currently supported converter unless an existing design must be serviced. When maintaining an existing PCM1702UE6 circuit, preserve the original pinout, analog topology, interface timing, and filtering arrangement because even a functionally similar replacement is not automatically a drop-in substitute. This product record combines the converter's core electrical characteristics, lifecycle position, package details, and replacement assessment. It also provides practical guidance for distinguishing true drop-in options from functionally similar converters that require different boards, interfaces, or analog circuitry.

RFQ צור קשר
PCM1704U - 24-Bit 96kHz Audio DAC | Texas Instruments
PCM1704U

PCM1704U - 24-Bit 96kHz Audio DAC | Texas Instruments

The Texas Instruments PCM1704U is a precision 24-bit, 96kHz BiCMOS sign-magnitude digital-to-analog converter (audio DAC) delivered in a 20-pin SOIC package. It operates from dual power supplies of approximately +5V and -5V, supports sampling frequencies from 16kHz to 96kHz with 8x oversampling at 96kHz, and offers a 0.2 microsecond output settling time over an operating temperature range of -25C to +85C. A digital-to-analog converter (DAC) is a mixed-signal device that transforms digital audio sample data into a continuous analog voltage or current. Within the signal-chain hierarchy, a DAC sits between a digital audio source (DSP, receiver, or interpolation filter) and the analog output stage (I/V converter and low-pass filter) of an audio system. High-resolution audio DACs such as the PCM1704 define the ultimate fidelity limit of the entire playback chain. Key features of the PCM1704U include exceptionally high dynamic performance, ultra-low distortion, and excellent low-level signal linearity. The advanced sign-magnitude architecture uses two matched DAC cores steered by a sign bit, which eliminates zero-crossing distortion - a fundamental weakness of conventional unipolar ladder DACs. This makes the device especially strong at reproducing quiet passages where low-level linearity matters most. Technically, the PCM1704 is fabricated on a BiCMOS process that combines high-speed bipolar analog circuitry with low-power CMOS logic. The serial audio input interface accepts standard I2S-style data, bit clock, and left/right clock signals, and the device is designed to be paired with a digital interpolation filter for 8x oversampling operation at 96kHz sampling rates. Typical applications include high-end consumer audio CD and SACD players, professional studio mastering equipment, digital mixing consoles, and audiophile outboard DACs, where the PCM1704's ultra-low distortion directly translates into greater dynamic range and transparency. Design consideration: because the PCM1704 requires dual supplies and an external I/V conversion stage, and is now obsoleted by Texas Instruments, new designs should budget for end-of-life sourcing or evaluate the PCM179x family, which TI identifies as the recommended performance successor rather than a pin-compatible replacement. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability, grade-variant comparisons, obsolescence guidance from TI E2E forums, and practical design notes in one place.

RFQ צור קשר
PCM1704U-J - 24-Bit 96kHz Sign-Magnitude DAC | Texas Instruments
PCM1704U-J

PCM1704U-J - 24-Bit 96kHz Sign-Magnitude DAC | Texas Instruments

The Texas Instruments PCM1704U-J is a precision 24-bit, 96 kHz sign-magnitude digital-to-analog converter from TI's SoundPlus family, housed in a 20-pin SOIC package. It delivers exceptional dynamic performance with K-grade dynamic range of 112 dB typical, signal-to-noise ratio of 120 dB typical, and THD+N as low as 0.0008% typical at the J grade. The device uses TI's proprietary BiCMOS sign-magnitude architecture with laser-trimmed thin-film resistors to achieve ultra-low distortion and excellent low-level signal resolution. A sign-magnitude DAC is a digital-to-analog converter architecture that uses two complementary current sources switched in opposite phase per bit, rather than a thermometer-coded unary or segmented topology. This approach eliminates the major-carry switching glitches inherent in conventional binary-weighted DACs, yielding -40 dB lower glitch energy. In the broader hierarchy, the PCM1704U-J sits as an audio DAC, which is a sub-category of data-converter IC, itself under the mixed-signal IC umbrella in signal chain products. The BiCMOS process pairs bipolar precision transistors with CMOS logic, achieving fast settling of ±1.2 mA in 200 ns while drawing modest operating current. The PCM1704U-J supports sampling frequencies from 16 kHz to 96 kHz with 8X oversampling when paired with a digital interpolation filter. Its fast current output of ±1.2 mA in 200 ns enables clean reproduction of transients in high-resolution audio material. Internal glitch-free differential current outputs eliminate mid-scale code-dependent distortion, while the on-chip precision bandgap reference stabilizes the output compliance over temperature. Typical applications include high-end consumer CD/SACD players, professional studio digital mixers, audiophile outboard DACs, and mastering-grade A/D converters. The wide dynamic range also makes it useful in measurement instrumentation where 24-bit resolution at high update rates is required. Key design considerations include using a true differential current-to-voltage converter (typically an op-amp such as the OPA1612 or OPA2134) and a low-noise voltage reference to bias the I-to-V stage. The 20-pin SOIC requires a standard SOIC-20 footprint, with analog and digital grounds tied at a single star point near the device. This page synthesizes manufacturer datasheet specifications, current distributor pricing, drop-in same-family alternatives within TI's PCM1704 grading scheme, and practical application circuits that are not consolidated in the original datasheet.

RFQ צור קשר
PCM1704U-J/2K - 24-Bit 96kHz Sign-Magnitude BiCMOS Audio DAC | Texas Instruments
PCM1704U-J-2K

PCM1704U-J/2K - 24-Bit 96kHz Sign-Magnitude BiCMOS Audio DAC | Texas Instruments

The Texas Instruments PCM1704U-J/2K is a precision 24-bit, 96 kHz BiCMOS sign-magnitude digital-to-analog converter housed in a 20-pin SOIC package. The J grade delivers 112 dB dynamic range, 120 dB SNR, and 0.0008 % THD+N (typical), making it one of the legendary multi-bit R-2R audio DACs long favored in high-end consumer and professional audio designs. The 8X oversampling interface supports a maximum sampling frequency of 96 kHz, while a fast current output of ±1.2 mA in 200 ns enables clean transient response for music reproduction. The /2K suffix denotes the 2,000-piece tape-and-reel packaging option. A digital-to-analog converter (DAC) is an integrated circuit that converts digital audio words into an analog voltage or current signal. Within the audio DAC taxonomy, the PCM1704 belongs to the multi-bit (R-2R ladder) sign-magnitude architecture rather than sigma-delta modulation, a distinction audiophiles credit with the part's characteristic sound. The PCM1704 is also the only DAC of its class with true 8X oversampling at 96 kHz, the practical limit for professional 24-bit audio. Key features of the PCM1704U-J/2K include sign-magnitude architecture that minimizes zero-crossing glitches, a glitch-free current output stage, ±1.2 mA / 200 ns fast current output for accurate transient rendering, and full 24-bit input audio word compatibility with external digital interpolation filters. The BiCMOS process technology combines bipolar precision with CMOS logic density, supporting the part's exceptional dynamic performance and low distortion. Hardware mute and de-emphasis functions are not internally generated, allowing the system designer to place any digital interpolation filter in front of the device. Typical applications include high-end audiophile CD/SACD players, professional studio outboard DACs, broadcast studio reference converters, and audiophile-grade external USB/I2S DACs. The PCM1704U-J is also widely used in high-end home theater processors and in DIY tube and solid-state preamp/DAC projects. When designing with this part, pair it with a high-performance digital interpolation filter such as the DF1704 or DF1706, a precision current-to-voltage I/V stage using low-noise op-amps like the OPA1612 or OPA627, and ensure adequate power-supply decoupling to maintain the part's 112 dB dynamic range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a typical DigiKey or Mouser product listing.

RFQ צור קשר
PCM1704U-K - 24-Bit 96kHz Sign-Magnitude Audio DAC | TI
PCM1704U-K

PCM1704U-K - 24-Bit 96kHz Sign-Magnitude Audio DAC | TI

The Texas Instruments PCM1704U-K is a precision 24-bit, 96 kHz BiCMOS sign-magnitude digital-to-analog converter from TI's SoundPlus audio lineage, housed in a 20-pin SOIC (SO) package and graded in the top-bin "K" performance class. It delivers 24-bit resolution at 96 kHz sampling with an ultra-low distortion architecture, 112 dB typical dynamic range, and a sign-magnitude topology that minimizes zero-crossing glitches versus conventional R-2R ladders. The serial audio data interface accepts 24-bit I2S-compatible words. A digital-to-analog converter (DAC) is a semiconductor device that reconstructs an analog waveform from a digital audio stream; within the broader taxonomy, audio DACs belong to data converters (ADC/DAC ICs), then mixed-signal ICs, then integrated circuits. The "sign-magnitude" topology uses two matched current sources (positive and negative) steered by separate bits, which avoids the differential non-linearity spikes around zero seen in standard binary-weighted ladders and yields lower THD at low signal levels. Key features include a +5V analog supply (VCC) and +5V digital supply (VDD), sign-magnitude architecture for glitch-free zero-crossing, internal bias and reference circuitry, and TTL-compatible digital inputs. According to the PCM1704 datasheet, the digital data words are read at eight times the standard DVD-Audio sampling frequency of 96 kHz (8 x 96 kHz = 768 kHz) to support a sinewave output of 1100 Hz. The PCM1704U-K is widely used in high-end consumer and professional audio equipment, including CD-reference players, audiophile outboard DACs, professional studio monitors, and high-end automotive audio head units. The "K" grade provides the best dynamic range and lowest THD of the three grades (K > J > no-letter), making it the preferred choice for flagship SACD/DVD-A reference designs where every microvolt of residual noise is audible. When designing with PCM1704U-K, provide separate analog and digital ground planes joined at a single point, decouple VCC and VDD with 10 uF electrolytic plus 0.1 uF ceramic capacitors placed close to the pins, and keep the I2S data and clock traces impedance-controlled and short. Use a high-quality I/V converter op-amp such as the OPA1612 or OPA627 to convert the current output to a low-impedance voltage signal.

RFQ צור קשר
PCM1704U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1704U/2K

PCM1704U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1704U/2K is a 24-bit, dual-channel BiCMOS sign-magnitude digital-to-analog converter supporting sampling rates up to 96 kHz. The device operates from dual ±5 V supplies and is packaged in a 20-pin SOIC with a 5.30 mm body width. Its serial interface and sign-magnitude output architecture make it suitable for high-fidelity digital audio systems. A digital-to-analog converter, or DAC, converts digital audio samples into continuous analog voltage signals. Within the broader signal-chain hierarchy, a DAC sits after the digital source and before the analog output amplifier, reconstruction filter, and speaker or headphone stage. The PCM1704U/2K is therefore a precision audio interface component that translates 24-bit digital words into separate positive and negative analog waveforms for two stereo channels. The principal features are 24-bit resolution, operation up to a 96 kHz sampling rate, two-channel sign-magnitude output, and dual ±5 V analog power. A BiCMOS process combines bipolar analog circuitry with CMOS control logic. The sign-magnitude output format provides separate positive and negative outputs around a bipolar reference system, allowing the downstream reconstruction network to preserve the sign of each digital sample. The PCM1704U/2K belongs to Texas Instruments' SoundPlus family of audio data converters. Its architecture is intended for CD-player, DVD-player, digital-audio, and other equipment requiring a serial digital input and high-resolution stereo conversion. Because the converter performs quantization directly into analog currents or voltages, support circuitry includes a clock source, digital-interface routing, output reconstruction filtering, and a stable low-noise reference arrangement. Typical applications include high-fidelity stereo DAC systems, CD and DVD audio equipment, digital mixing consoles, USB and network-audio player analog output stages, and premium consumer audio products. The 96 kHz maximum rate supports high-resolution source material, while the 24-bit word length is appropriate for preserving low-level signal detail through the digital portion of the audio chain. Layout is critical because the analog outputs and digital inputs meet on a small 20-pin SOIC. Keep digital clock and data traces away from the output pins, provide a low-impedance ground return, and use symmetric decoupling close to the supply pins. Follow the manufacturer datasheet for the output load, reference, filter, and power-supply requirements rather than treating the DAC as a general-purpose converter. This page combines the verified PCM1704U/2K package and conversion specifications with comparison guidance, sourcing information, and practical application notes. It also distinguishes true pin-compatible options from newer PCM179x products that may require a different interface, package, or output architecture.

RFQ צור קשר
PCM1710U/1K - 20-Bit Stereo Audio DAC | Texas Instruments
PCM1710U/1K

PCM1710U/1K - 20-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1710U/1K is a dual 16/20-bit audio digital-to-analog converter with 48 kHz serial audio operation, housed in a 28-pin SOIC package measuring 0.295 inches, or 7.50 mm, in body width. The device integrates the digital processing and dual voltage-output conversion functions required to translate decoded stereo audio data into left- and right-channel analog signals. An audio DAC is a semiconductor in the digital-to-analog converter and data-conversion hierarchy. It receives digital audio samples, reconstructs their analog voltage waveform, and supplies a continuously variable analog signal for downstream audio amplification. The PCM1710U/1K combines a stereo converter architecture with a serial digital interface, making it suitable for systems that convert CD, DVD, broadcast, or computer audio into balanced or unbalanced analog outputs. The principal identified specifications are 20-bit resolution, 48 kHz operation, dual analog output, and a 28-SOIC package. The converter description identifies it as a dual 16/20-bit audio DAC with dual voltage outputs. Its serial interface allows a digital audio source to feed the converter without requiring a parallel data bus, reducing wiring complexity in compact consumer and professional audio equipment. The PCM1710U/1K is intended for stereo audio signal paths where two analog channels are required from one converter package. Its 48 kHz rate aligns with the conventional 44.1 kHz CD-audio domain and other base-rate digital audio systems. The 20-bit advertised resolution describes the converter's digital data capability, while the 16/20-bit designation reflects the converter family terminology used in the product description. Typical uses include CD-player analog stages, multichannel audio receivers, digital mixing equipment, active speakers, and general-purpose stereo audio acquisition systems. In these applications, the converter is placed between a digital audio source and an analog voltage amplifier or line-input stage. The analog outputs must be interpreted according to the manufacturer's application circuit, including the required decoupling and output integration network. When laying out the PCB, treat the SOIC power and ground connections as high-current paths and keep analog output routing away from digital clock and serial-data traces. Verify the required output filters, mute behavior, and analog supply arrangement against the manufacturer datasheet before releasing the layout. This page also consolidates the exact ordering code, package information, commercial data, and drop-in replacement assessment for engineering review.

RFQ צור קשר
PCM1710UG4 - 20-Bit Stereo DAC | Texas Instruments | Audio
PCM1710UG4

PCM1710UG4 - 20-Bit Stereo DAC | Texas Instruments | Audio

Texas Instruments PCM1710UG4 is a 20-bit stereo delta-sigma digital-to-analog converter with dual voltage outputs, an integrated output amplifier, and a 28-pin SOIC package. The device operates from a nominal 5 V supply, draws no more than 70 mA, supports analog and digital supply connections, and is specified for -25 °C to +85 °C operation. Its published performance includes 92 dB THD+N, 98 dB dynamic range, and 8× digital oversampling. An audio DAC is a data-conversion IC that transforms digital PCM audio samples into left- and right-channel analog voltages. Within the broader hierarchy, PCM1710UG4 is a delta-sigma DAC, which belongs to the ADC/DAC and data-converter IC categories. Its stereo architecture, serial data interface, multi-level delta-sigma core, analog low-pass filter, and output amplifier consolidate several analog-audio signal-chain functions into one package. Key features include 20-bit resolution, dual voltage output, an 8× oversampling digital filter, and an integrated analog reconstruction low-pass filter. The 92 dB THD+N specification indicates low harmonic distortion and noise for stereo playback systems, while the 98 dB dynamic-range figure supports wide-level reproduction without requiring an unusually large output swing. The converter accepts both analog and digital supply rails and provides a maximum analog output voltage of 3.2 V. The PCM1710UG4 uses a serial interface and a delta-sigma conversion architecture. Its digital filter and analog low-pass section work together to reconstruct a continuous analog waveform from the oversampled digital stream. Because the converter includes an output amplifier, the system designer can evaluate the analog output stage as a complete functional block rather than treating the DAC as a bare conversion core. Typical applications include CD-player audio paths, digital audio equipment, stereo amplifier input stages, home-audio systems, and embedded audio products. Its 28-pin SOIC package supports conventional surface-mount assembly and tube packaging is identified for the ordered device. In a completed design, the useful operating region should be established with the 5 V nominal supply, the 70 mA maximum supply-current figure, and the 3.2 V maximum analog output condition. The primary design consideration is analog layout. Keep the digital clock and data traces away from the analog output pins, provide the bypass capacitors required by the application circuit, and route both analog and digital return currents deliberately. Headroom should also be checked because the published maximum analog output voltage of 3.2 V is below the nominal 5 V supply. This product record combines the published PCM1710UG4 specifications, package information, sourcing links, lifecycle indication, replacement analysis, and practical PCB guidance. It is intended to support direct comparison with related Texas Instruments converters while keeping unresolved electrical and pin-level details separate from confirmed product facts.

RFQ צור קשר
PCM1716E - 24-Bit 96 kHz Stereo Audio DAC | Texas Instruments
PCM1716E

PCM1716E - 24-Bit 96 kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1716E is a 24-bit, 96 kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter in a 28-pin SSOP package. The device accepts digital audio data through its I2S interface and is designed for stereo audio playback systems requiring a compact, high-resolution converter. Its 28-SSOP package supports surface-mount assembly while keeping the component count and board area low. A digital-to-analog converter, or DAC, is a signal-conversion IC that transforms digital audio samples into left- and right-channel analog voltage signals. The PCM1716E belongs to the delta-sigma DAC family, a CMOS architecture that uses multi-level noise shaping and digital filtering to produce an analog output suitable for audio amplifiers and line-output stages. Its stereo output architecture supports simultaneous left and right channels from one component. The PCM1716E provides 24-bit digital resolution and a sampling frequency range of 16 kHz to 96 kHz. The verified manufacturer description identifies support for standard, I2S, and left-justified data formats, giving designers flexibility across common audio source formats. Digital de-emphasis and independent left and right digital attenuation are also identified as device features, allowing software or system-level control of playback behavior. The converter architecture separates digital signal processing from analog output generation. Its digital interface accepts the bit clock, left-right clock, and serial data signals, while the analog section produces the stereo output. Independent channel attenuation is particularly useful in dual-mono equipment or systems that need separate level management for the two output channels. The CMOS implementation also aligns with modern low-power audio product design requirements. Typical applications include CD and DVD player analog output stages, digital audio amplifiers, home-theater receivers, active speakers, USB or network audio products, and compact digital audio equipment. For each application, the converter must be followed by an appropriate analog output stage and output filtering network, while the digital source must provide compatible clocking and data timing. When designing a PCB around the PCM1716E, verify the complete pin assignment and reference layout against the manufacturer datasheet before routing power, clocks, data, and analog outputs. Decoupling should be placed close to the supply pins, analog and digital return paths should be managed carefully, and the output network should preserve the converter's intended signal integrity. The available evidence does not provide the complete pin names, exact electrical limits, or a verified price ladder. This page consolidates the verified PCM1716E format, resolution, sampling-rate, interface, package, sourcing, and cross-reference information, while clearly separating unavailable electrical details from confirmed manufacturer features. It also provides application guidance, design notes, and a strict review of available drop-in replacement evidence.

RFQ צור קשר
PCM1716E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1716E/2K

PCM1716E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1716E/2K is a 24-bit, 96 kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter with an I2S digital audio interface, packaged in a 28-SSOP housing measuring 5.30 mm wide. Designed for mid-range and high-grade digital audio equipment, it converts two channels of digital audio into analog stereo output while supporting audio data rates up to 24 bits and 96 kHz sampling. A digital-to-analog converter, or DAC, is an integrated circuit that reconstructs continuous analog voltage signals from digital audio samples. Within the signal-chain hierarchy, the PCM1716E belongs to the audio DAC class, connects a digital audio source such as a USB interface, decoder, or digital mixer to an analog output stage, and ultimately feeds amplifiers, headphone drivers, or line-level circuitry. This conversion stage determines the fidelity of the analog waveform presented to the downstream audio hardware. Key characteristics include a 24-bit resolution, a maximum stated sampling rate of 96 kHz, stereo output, CMOS construction, and an I2S serial interface. The I2S interface reduces the number of signal lines required when routing digital audio between devices, while the two-channel architecture supports conventional left-right stereo playback. The 28-SSOP package keeps the converter compact enough for consumer, multimedia, and professional audio boards. The PCM1716E/2K uses delta-sigma conversion technology, a CMOS-based architecture commonly used in modern digital audio converters. Delta-sigma converters shape quantization noise into the out-of-band region so that a digital reconstruction filter can remove it before the analog signal reaches the output stage. The converter accepts PCM-format digital audio and provides analog stereo outputs suitable for downstream amplification and filtering. Typical applications include CD and DVD player digital audio sections, home-theater and multimedia receivers, active speakers, digital mixing consoles, USB audio interfaces, consumer audio appliances, and sound-card designs. Its 96 kHz capability also suits professional and broadcast equipment operating at higher-than-CD sample rates when the associated system clock and reconstruction filtering are designed accordingly. Designers should follow the pin-description table and typical application circuits in the manufacturer datasheet when assigning the I2S interface, analog output filters, supply rails, and bypass capacitors. Decoupling capacitors should be placed close to the supply pins, and the analog output network must be matched to the intended line or headphone drive stage. Verify output compliance, clock requirements, and supported data formats for the exact system configuration before layout release. This page consolidates the device specifications, ordering details, sourcing information, and same-footprint family alternatives into a single engineering reference. It also adds application guidance, comparison parameters, and design notes that help shorten evaluation time while keeping the manufacturer datasheet as the controlling technical authority.

RFQ צור קשר
PCM1717E - 18-Bit 48 kHz Stereo DAC | Texas Instruments
PCM1717E

PCM1717E - 18-Bit 48 kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1717E is a stereo audio digital-to-analog converter with 18-bit resolution, support for audio data up to 48 kHz, and a 20-pin SSOP package. The converter uses a delta-sigma DAC architecture with an 8X oversampling digital filter and a multilevel delta-sigma DAC followed by an analog low-pass filter. It provides two analog output channels for left and right stereo audio signals and accepts 18-bit input data according to the manufacturer datasheet. An audio DAC is a data-converter IC that transforms digital PCM audio samples into left- and right-channel analog voltages suitable for amplifiers, headphones, line outputs, or downstream audio-processing stages. Within the broader semiconductor hierarchy, the PCM1717E is an ADC/DAC and audio interface IC, while its delta-sigma implementation places it within digital-to-analog converters and sound-card signal-chain devices. Its 20-pin SSOP package provides a compact surface-mount form factor for multichannel consumer and industrial audio equipment. The principal verified features include complete stereo conversion, 18-bit input-data support, 48 kHz operation, 8X digital-filter oversampling, a multilevel delta-sigma DAC, and an analog low-pass filter. These functions integrate the essential digital decoding and analog reconstruction stages into one device. The two-channel architecture reduces the need for separate converters when a design must reproduce a standard stereo program. The 20-SSOP package measures 0.209 inches, or 5.30 mm, in body width according to the distributor listing. The PCM1717E combines a multi-level delta-sigma conversion stage with oversampled digital filtering. Digital filtering shapes the incoming PCM stream before conversion, while the analog low-pass filter suppresses high-frequency energy at the outputs. Because the supplied distributor and manufacturer-search data do not publish detailed dynamic-range, distortion, output-voltage, clock, power-supply, or channel-separation figures, those values remain unverified here and must be confirmed in the manufacturer datasheet before final analog, clock, or power-budget calculations are released. Typical uses include digital audio player boards, multimedia systems, active speakers, compact consumer stereo equipment, and embedded audio interfaces. Its stereo DAC function is also relevant to USB or legacy digital-audio subsystems where an I2S-compatible source must be converted into analog left and right outputs. The verified distributor description identifies the interface as I2S-capable, while exact supported formats and electrical limits should be checked against the relevant revision of the manufacturer datasheet. The primary design consideration is PCB implementation. The 20-pin SSOP footprint requires adequate copper, clean return paths, and correctly placed input and output capacitors; exact capacitor values, supported voltage rails, and output architecture must be taken from the datasheet rather than inferred. Clocking, digital-interface levels, analog grounding, and power sequencing should also be verified against the complete application circuit. This page combines verified distributor pricing and package information, manufacturer-datasheet feature statements, sourced drop-in cross-reference data, and engineering-focused selection guidance. It distinguishes verified facts from unavailable parameters so engineers can accelerate sourcing without treating unconfirmed electrical values as design guarantees.

RFQ צור קשר
PCM1717E/2K - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1717E/2K

PCM1717E/2K - 18-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1717E/2K is a stereo delta-sigma digital-to-analog converter for audio systems, featuring 18-bit resolution, 48 kHz operation, and I2S audio input in a 20-pin SSOP package. The device is designed for compact consumer and multimedia equipment requiring two-channel digital audio conversion with a straightforward serial interface. It accepts digital audio data through the I2S interface and provides analog stereo outputs for external amplification or line-level routing. A digital-to-analog converter, or DAC, converts sampled digital audio into corresponding analog voltage signals. Within the signal chain, the PCM1717E/2K belongs to the ADC/DAC and audio-interface hierarchy, where it bridges a digital audio source and an analog audio output stage. Its delta-sigma architecture is suited to audio applications in which a compact converter with integrated digital input and stereo analog outputs is preferable to a discrete codec implementation. The key specifications are 18-bit resolution, operation up to 48 kHz, two-channel conversion, and a 20-pin SSOP package. The verified manufacturer and distributor listings identify the device as an audio DAC with I2S input, while additional detailed electrical characteristics require confirmation from the manufacturer datasheet. The 20-pin surface-mount format supports compact PCB layouts, although analog and digital return paths still require careful routing. PCM1717E/2K is suitable for CD-player and digital-audio subsystems, consumer audio equipment, multimedia computers, set-top boxes, and other embedded audio products that use I2S-compatible digital audio sources. Its stereo output architecture simplifies system partitioning by placing conversion directly between the digital source and an analog amplifier or line input. When laying out the PCB, keep the digital input traces away from the analog output traces, use a continuous ground reference plane, and place the power and signal-conditioning components close to their associated pins. Confirm the required analog output network, bypass capacitors, power sequencing, and supported logic levels against the manufacturer datasheet before releasing a production layout. This product page combines the verified manufacturer and distributor listing information with package, application, replacement, and design guidance for engineers evaluating PCM1717E/2K. It also identifies the limitations of the available technical information so that footprint, pin, and electrical validation can be completed against the official datasheet.

RFQ צור קשר