Analog Devices

AD704AN - Quad Picoampere Input Op Amp | Analog Devices

MPN: AD704AN ✓ פעיל
75 uV Vdss 80 pA Id 14-pin PDIP Package
כמות הזמנה מינימלית: 1 |

AD704AN סקירה

Analog Devices AD704AN is a low-power, quad bipolar operational amplifier featuring picoampere-class input bias current, low input-bias-current drift, and a 14-pin PDIP package. Its principal characteristics include approximately 80 pA input bias current, 1 uV/°C input-bias-current drift, 132 dB open-loop gain, 150 V/ms slew rate, 75 uV input offset voltage, and a 2 V to 18 V supply range. The commercial temperature rating is -40°C to +85°C.

An operational amplifier is an analog signal-conditioning IC that compares voltages applied to its inverting and non-inverting inputs and amplifies the difference. The AD704 belongs to the bipolar operational-amplifier hierarchy, where bipolar input transistors provide low-voltage operation and precision analog performance without the input leakage normally associated with BiFET input stages. Four amplifiers are integrated into one package for instrumentation, measurement, sensor-signal conditioning, and precision analog systems.

The AD704's defining benefit is its combination of very low input bias current and unusually stable bias-current behavior over temperature. Analog Devices describes the circuit as a low-power bipolar op amp with picoampere input current, using SuperBeta bipolar input transistors to achieve input bias current comparable to FET-input amplifiers at room temperature. This makes the device relevant when source leakage or measurement drift could obscure a small sensor signal.

The device combines four unity-gain-stable amplifiers with an open-loop gain of 132 dB and a slew rate of 150 V/ms. Its 75 uV input offset voltage supports precision signal conditioning, while the stated 15 mA supply current reflects the low-power design goal. A 2 V to 18 V total supply range provides flexibility between low-voltage instrumentation systems and conventional ±18 V analog environments. The built-in compensation and ESD protection indicated by the product listing reduce external circuit complexity.

Typical uses include pH and chemical sensors, photodiode and optical-measurement front ends, laboratory instrumentation, low-current transducers, and precision analog signal-conditioning boards. Four independent amplifiers in one package can simplify channel-count designs when four similar low-leakage front ends are required. Board-area savings must be weighed against the larger through-hole footprint of the PDIP-14 package compared with a modern surface-mount quad op amp.

When designing around the AD704AN, prioritize input-source leakage, input-bias-current drift, offset voltage, and the bias network around each amplifier. Keep sensitive input traces away from power switches, high-impedance nodes, and exposed pad connections in other components. Confirm common-mode range, output swing, noise, stability, and maximum input differential voltage against the manufacturer's datasheet for the exact operating conditions.

This page consolidates the AD704AN's principal electrical characteristics, package information, application guidance, and same-family ordering alternatives into an engineering-focused selection reference. It also identifies the distinctions that must be checked before using a temperature-grade or lead-free ordering code as a replacement.

חלופות תחליף ישיר עבור AD704AN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AD704AN (אותו גורם צורה וטביעת רגל).

AD704ANZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-pin PDIP
Lead-free ordering suffix; core electrical ratings match 100%, with a 0 V change to the principal AD704AN ratings

📋 חלופה להתייחסות (לא בקטלוג)

AD704BNZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-pin PDIP
Different temperature-grade suffix with approximately 10% less parameter proximity; package and principal ratings remain aligned

📋 חלופה להתייחסות (לא בקטלוג)

AD704CNZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-pin PDIP
Different temperature-grade suffix with approximately 10% less parameter proximity; package and principal ratings remain aligned

📋 חלופה להתייחסות (לא בקטלוג)

AD704JN

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 14-pin PDIP
Quad precision bipolar operational amplifier · 4 channels · Superbeta bipolar input transistors · Picoampere class · Typically increases only at +125 °C · Low-power bipolar operational amplifier · 14-pin through-hole DIP · 14 pins

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD704KN

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-pin PDIP
Different temperature-grade suffix with approximately 10% less parameter proximity; package and principal ratings remain aligned

📋 חלופה להתייחסות (לא בקטלוג)

AD704AN דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Quad precision bipolar operational amplifier
Number of Channels 4 channels
Input Bias Current 80 pA
Maximum Input Bias Current 150 pA
Input Bias Current Temperature Drift 1 uV/°C
Input Offset Voltage 75 uV
Open-Loop Gain 132 dB
Slew Rate 150 V/ms
Supply Voltage Range 2 V to 18 V
זרם אספקה 15 mA
טווח טמפרטורת פעולה -40°C to +85°C
מארז 14-pin PDIP
Compensation Built-in compensation
ESD Protection Built-in ESD protection
Input Transistor Technology SuperBeta bipolar input transistors
סטטוס מחזור חיים PRODUCTION

מדריך תצורת פינים של AD704AN 14-pin pdip

תצורת פינים עבור AD704AN (מארזת 14-pin pdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 14-pin pdip עבור AD704AN

אין נתוני פריסת פינים מפורטים עבור AD704AN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD704AN מתאים עבור 6 יישוםs: High-Impedance Sensor Signal Conditioning, pH and Electrochemical Measurement, Optical and Photodiode Front Ends, Laboratory Instrumentation and Measurement, Low-Current Transducer Amplification, Battery-Powered Precision Analog Systems.

🧩

High-Impedance Sensor Signal Conditioning

The AD704AN fits precision front ends for high-impedance sensors where source leakage must remain small relative to the amplifier input. Its 80 pA input bias current and 1 uV/°C input-bias-current drift help reduce errors as source impedance and temperature vary, while 132 dB open-loop gain supports accurate amplification of small differential signals. Four amplifiers can condition four similar sensor channels in one package. Place the amplifier close to the sensor, protect high-impedance nodes with guarding, and verify that connector leakage and PCB contamination remain below the required error budget.

💊

pH and Electrochemical Measurement

Electrochemical and pH sensors can present very high source impedance, making input bias current and its temperature drift important error sources. The AD704AN's 80 pA input bias current, low 1 uV/°C drift, and 75 uV input offset voltage support low-level signal conditioning without the larger bias current typical of conventional bipolar inputs. Its four-channel arrangement allows several electrode channels to share one package type. Use guarded traces, clean connectors, and low-leakage protection networks, and confirm electrode-specific common-mode and output-swing requirements in the manufacturer's datasheet.

📷

Optical and Photodiode Front Ends

The AD704AN is suitable for low-current optical front ends where the amplifier should introduce minimal input bias current. Its 80 pA bias current helps preserve weak photodiode currents, and the 150 V/ms slew rate provides useful bandwidth for moderate transient response. The 14-pin PDIP package also supports prototyping and manual rework in precision laboratory equipment. The practical trade-off is a larger board footprint than a surface-mount quad amplifier. Place the device near the photodiode, use low-leakage guarding, and account for diode capacitance when evaluating stability.

🔧

Laboratory Instrumentation and Measurement

The AD704AN supports precision laboratory measurement circuits where low input current and stable bias behavior determine the usable resolution. Its four amplifiers can implement buffer, gain, difference, and active-feedback functions while sharing a 2 V to 18 V supply capability. The 132 dB open-loop gain and 75 uV offset voltage are valuable when scaling small sensor outputs, although noise and gain-bandwidth requirements must still be checked for each circuit. A grounded guard around sensitive inputs and short feedback paths will help preserve measurement integrity.

📊

Low-Current Transducer Amplification

For current-output or resistive transducers, the AD704AN can provide low-input-bias-current amplification with enough open-loop gain for high-impedance feedback networks. The 80 pA typical input bias current minimizes loading, and the 1 uV/°C drift specification helps control temperature-dependent measurement shifts. Four channels reduce the number of packages required in a multi-axis or multi-sensor instrument. The designer should still verify output swing, common-mode limits, noise, and stability with the actual feedback components, because those operating limits are not determined by the headline gain and bias-current ratings alone.

📱

Battery-Powered Precision Analog Systems

The AD704AN is appropriate for portable or battery-powered analog systems that require low bias current without moving to a MOSFET-input amplifier. Its listed 15 mA supply current and 2 V to 18 V supply range provide a practical operating envelope for low-voltage instrumentation and industrial signal-conditioning designs. The tradeoff is that bipolar input bias current can change more over temperature than a conventional BiFET input stage. Use low-leakage protection devices, verify the complete power budget, and confirm that transient current and shutdown behavior satisfy the battery system's load profile.

What is the AD704AN?
The AD704AN is a four-channel, low-power bipolar operational amplifier from Analog Devices, specified for picoampere-class input bias current and low input-bias-current drift. According to the Analog Devices AD704 product page, it uses SuperBeta bipolar input transistors to reach input bias current levels comparable to FET-input amplifiers at room temperature. It is packaged in a 14-pin PDIP and includes four amplifiers in one through-hole package.
What are the key specifications of AD704AN that engineers should know?
The AD704AN combines four precision bipolar amplifiers in a 14-pin PDIP package. Principal specifications include 80 pA input bias current, 150 pA maximum input bias current, 1 uV/°C bias-current drift, 75 uV input offset voltage, 132 dB open-loop gain, 150 V/ms slew rate, and a 2 V to 18 V supply range. The commercial operating range is -40°C to +85°C, according to the Analog Devices product documentation and distributor technical listing.
Where can I download the AD704AN datasheet PDF?
The official AD704AN datasheet is available through Analog Devices' AD704 product page at https://www.analog.com/en/products/ad704.html. The page identifies the Data Sheet as Revision E and provides the manufacturer documentation. Use that document to verify the pin-description table, electrical characteristics, common-mode range, output swing, input differential voltage limits, and recommended application circuits before finalizing a PCB or production design.
Where can I find the AD704AN pinout?
Use the pin-description table in the Analog Devices AD704 manufacturer's datasheet for the authoritative AD704AN pin assignment. The AD704AN is supplied in a 14-pin PDIP package, but the search listing does not reproduce individual pin numbers or signal names. The datasheet's package drawing should be cross-checked against the PCB footprint, including the orientation notch and pin-1 position, before fabrication.
Where to buy AD704AN online?
Use the Request a Quote form on this page to request the AD704AN and confirm current commercial availability, package form, and order quantity. The part is listed by Analog Devices as a production product and is offered in a 14-pin PDIP package. A quotation request is the appropriate route for current sourcing because channel inventory, lot conditions, and shipment timing can change without notice.
What is the price of AD704AN?
Current AD704AN commercial pricing is obtained through the Request a Quote form on this page. The available product information identifies a 1 ku list price starting point for the AD704 family but does not provide a quantity-break schedule for the exact AD704AN ordering code. Submit the required quantity and package configuration in the form to receive a current quotation rather than relying on an outdated market figure.
What is the lead time for AD704AN?
The current AD704AN lead time should be confirmed through the Request a Quote form on this page. Analog Devices lists the AD704 family as a production product, but production status alone does not guarantee immediate stock, a fixed lead time, or every package form. Include your required quantity, date code preference, and approved manufacturer list when requesting the quotation.
Is AD704AN in stock?
AD704AN stock status should be checked through the Request a Quote form on this page. The manufacturer identifies the AD704 as a production product, while the current channel quantity is handled as a quotation request rather than a guaranteed inventory statement. Provide your required quantity and target date so current availability and delivery can be confirmed for the exact AD704AN ordering code.
What is the difference between AD704AN and other AD704 ordering codes?
AD704AN denotes the Analog Devices AD704 precision quad bipolar op amp in a 14-pin PDIP configuration. Ordering codes within the AD704 family can differ by temperature grade, package, or lead-free suffix, so the package suffix must be compared carefully. The AD704 product page identifies the AD704AN as production and describes the same core picoampere-input bipolar architecture; consult the ordering table before substituting another code.
When should I choose AD704AN over a conventional precision op amp?
Choose the AD704AN when the measurement path is dominated by source leakage, picoampere-scale bias current, or bias-current temperature drift. Its 80 pA input bias current and 1 uV/°C drift specification distinguish it from conventional bipolar op amps, while four amplifiers in one package simplify multichannel measurement layouts. A conventional precision amplifier may be preferable when ultra-low bias current is unnecessary and a smaller surface-mount package is the priority.
Is AD704AN suitable for high-impedance sensor measurement?
The AD704AN is well suited to high-impedance sensor front ends when the sensor leakage is comparable to or greater than the amplifier's 80 pA input bias current. Its 132 dB open-loop gain and 75 uV input offset voltage support precision amplification, while the 150 V/ms slew rate handles moderate signal dynamics. The complete front end still requires guarding, clean layout, and careful validation of source capacitance and leakage.
What is the best drop-in replacement for AD704AN?
No independently verified cross-brand drop-in replacement is established for the AD704AN in the available cross-reference results. Same-family Analog Devices ordering codes can preserve the 14-pin PDIP footprint, but temperature grade, electrical limits, and order suffix must be checked before replacement. Use the Request a Quote form for sourcing support and the manufacturer's ordering table to confirm that a selected AD704 code is electrically and mechanically equivalent.
What can replace AD704AN?
The closest replacements are qualified Analog Devices AD704 family order codes using the same 14-pin PDIP package, provided their temperature grade and electrical ratings meet the original design requirements. The available cross-brand results do not identify a confirmed pin-compatible substitute. A candidate from another manufacturer should not be treated as drop-in unless its package drawing, pin functions, common-mode range, offset voltage, bias current, supply range, and stability behavior all match.
Is there an AD704 equivalent from another manufacturer?
No confirmed cross-brand AD704 equivalent with verified pin compatibility is identified in the available cross-reference results. A functional substitute may exist, but sharing picoampere-class input bias current, low drift, low offset voltage, and unity-gain stability is more important than matching only the amplifier count and supply rating. Any cross-brand proposal requires a board-level review rather than a simple last-pin compatibility assumption.
AD704AN versus a surface-mount quad op amp: which should I choose?
Choose the AD704AN when picoampere input bias current, low drift, and a 14-pin PDIP assembly method outweigh the need for a small surface-mount footprint. Its four integrated amplifiers provide 132 dB open-loop gain, 150 V/ms slew rate, and a 2 V to 18 V supply range. A surface-mount quad amplifier is generally preferable for automated high-density assembly, but it must independently meet the required bias current and temperature-drift limits.
How should sensitive AD704AN input nodes be laid out?
Route high-impedance inputs as short as possible and keep them away from power-switching nodes, inductors, clock signals, and grounded test pads. Guarding can help control surface leakage, while clean connector insulation and contamination control reduce errors that may resemble amplifier offset. The AD704AN's 80 pA bias current is exceptionally low, so PCB contamination and adjacent leakage can become significant error sources in high-gain measurements.

נתוני עזר הנדסיים עבור AD704AN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD704AN when a four-channel precision amplifier must combine very low input bias current, low bias-current drift, and an open-loop gain of 132 dB. It is particularly appropriate for high-impedance sensors, electrochemical probes, optical front ends, and laboratory instrumentation where conventional bipolar amplifier leakage would distort the result. The 14-pin PDIP package also makes it practical for prototypes and manually serviced industrial equipment, although it consumes more board area than a surface-mount quad amplifier.

Choose AD704ANZ when its lead-free ordering configuration satisfies procurement requirements and its electrical ratings match the original design. Consider the other listed AD704 family codes only after checking their exact temperature grade, electrical limits, and ordering status against the manufacturer's table. The listed MC3403DR can be considered when a general-purpose quad amplifier is sufficient and the lower bias current and drift of the AD704AN are unnecessary, but it should not be treated as a direct replacement without measurement-level verification. For any proposed substitute, confirm pin functions, package geometry, common-mode range, output swing, stability, input capacitance, and input leakage.

השוואה עם חלופות

פרמטר מוצר זה AD704ANZ AD704BNZ AD704CNZ AD704JN AD704KN
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
Amplifier Count 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels

מבדילים עיקריים

  • Exceptionally low input bias current for a bipolar amplifier (לעומתMC3403DR)
  • Low input-bias-current drift (לעומתMC3403DR)
  • Four amplifiers with strong open-loop gain (לעומתMC3403DR)
  • Single-package supply-range flexibility (לעומתAD704ANZ)

הערות תכנון

Keep each high-impedance input short, clean, and surrounded by a grounded guard where practical. Avoid routing sensitive inputs beside switching-regulator traces, relay contacts, test points, or unshielded connector pins. Surface contamination and connector leakage can become significant when the amplifier's input bias current is only 80 pA. Use clean assembly practices, conformal protection when appropriate, and separate the sensitive analog return path from high-current output paths.

Do not assume that low input bias current eliminates all DC error. Account for the stated 75 uV input offset voltage, 1 uV/°C bias-current drift, resistor tolerance, leakage through protection components, and error caused by input and output common-mode limits. Check the manufacturer's operating-table conditions against the actual supply voltage, output load, channel configuration, and temperature range before treating the headline specifications as unconditional limits.

Use a conventional 14-pin PDIP footprint and verify pin-1 orientation against the manufacturer's package drawing. Place input and feedback components close to their associated amplifier pins to minimize parasitic capacitance and leakage. Because the device supports four independent channels, preserve channel symmetry in analog routing and grounding so that one channel does not inherit another channel's switching or thermal disturbance.

Evaluate stability with the actual source capacitance, feedback network, load, and supply decoupling. The 150 V/ms slew rate provides adequate response for many precision measurement signals, but speed alone does not establish usable bandwidth in a noisy or capacitive source. Keep supply bypass capacitance close to the device, maintain short feedback loops, and test the completed board for oscillation before adding input protection networks that add capacitance or leakage.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The AD704 is identified as a production product, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are stated in the available product information. AEC-Q100 is not applicable to this general-purpose analog amplifier.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD704AN datasheet AD704AN pinout AD704AN datasheet pdf AD704AN specifications AD704AN equivalent AD704AN replacement AD704AN cross reference AD704AN vs MC3403DR AD704AN PDIP-14 pinout AD704AN spice model Analog Devices AD704AN AD704AN price

רכיבים ומונחים קשורים

Analog Devices AD704AN AD704 AD704ANZ AD704BNZ AD704CNZ AD704JN AD704KN MC3403DR operational amplifier quad op amp precision amplifier bipolar input transistor SuperBeta input bias current input offset voltage open-loop gain slew rate PDIP-14 picoampere input current high-impedance sensor electrochemical measurement RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר