Analog Devices

ADM241LJRZ - 120 kbps RS-232 Transceiver | Analog Devices

MPN: ADM241LJRZ ✓ פעיל
5 V Vdss EIA-232-E and V.28 Rds(on) 28-pin SOIC Package
כמות הזמנה מינימלית: 1 |

ADM241LJRZ סקירה

Analog Devices ADM241LJRZ is a four-driver, five-receiver RS-232 transceiver designed for a single 5 V supply. It supports data rates up to 120 kB/s, provides approximately ±9 V output swing, and uses small 1 µF charge-pump capacitors. The device is offered in a 28-pin SOIC package and is intended for EIA-232-E and V.28 communication interfaces where ±12 V is unavailable.

An RS-232 transceiver is an interface IC that converts logic-level signals from a host or controller into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible levels. It belongs to the line-driver and receiver hierarchy within the broader interface-IC and communications-IC categories. The ADM241L family uses on-board DC-DC converters to generate the bipolar voltage needed for compliant RS-232 operation from one low-voltage supply.

The ADM241LJRZ provides four transmit channels and five receive channels, allowing four RS-232 outputs and five inputs in one package. Its specified 120 kB/s data rate supports legacy serial-control, point-of-sale, industrial-control, and instrumentation links. The ±9 V output swing is particularly useful when the system does not have the ±12 V rails traditionally associated with an RS-232 interface. A shutdown function is also part of the broader ADM2xx family described by Analog Devices.

Operationally, the integrated charge-pump circuitry increases the supply voltage to produce the required positive and negative line voltages. This eliminates the need for a separate dual-polarity RS-232 supply, while the small 1 µF capacitor requirement helps reduce board area. However, charge-pump ripple and switching noise remain important considerations when the transceiver shares a sensitive analog or high-speed digital supply domain.

Typical uses include industrial control systems, test and measurement equipment, data-acquisition systems, security equipment, and embedded serial interfaces. The 28-pin SOIC footprint provides a practical upgrade path for designs that need four RS-232 driver outputs and five receiver inputs without using separate driver and receiver ICs. Care is still required for cable routing, ground reference, and protection at exposed connector interfaces.

For PCB implementation, place the charge-pump capacitors and interface bypass capacitor close to their specified pins, keep RS-232 traces away from sensitive analog inputs, and provide the connector-side transient protection required by the installation environment. Treat the RS-232 ground as a signal reference and route it with the interface conductors rather than treating it as an incidental chassis connection.

This product page combines the ADM241L specification summary, documented drop-in alternatives, application guidance, and package-level design notes to help engineers evaluate the ADM241LJRZ for new and existing RS-232 interfaces.

חלופות תחליף ישיר עבור ADM241LJRZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ADM241LJRZ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Number of Receivers, Package Width, Maximum Data Rate, Number of Drivers.

Analog Devices
Package: 24-pin SOIC
Number of Receivers: 4
Package Width: 7.5 mm
השווה עם ADM241LJRZ →
Analog Devices
Number of Receivers: 5 channels
Maximum Data Rate: 120 kbps
Number of Drivers: 4 channels
השווה עם ADM241LJRZ →
Maxim Integrated
Package: 28-SOIC (WSOIC)
Package Width: 7.50mm
השווה עם ADM241LJRZ →

HIN211CB-T

✅ Drop-In
📦 28-pin SOIC
Compatible 28-pin RS-232 alternative with 1 receiver rather than 5; four unused receiver inputs on the original device must be reviewed.

📋 חלופה להתייחסות (לא בקטלוג)

MAX211ECWI+

✅ Drop-In
Maxim Integrated
📦 28-pin SOIC
RS-232 transceiver · RS-232 and CMOS · 5V · 4 drivers · 5 receivers · RS-232 and V.28 · ±15kV · 4 x 0.1uF

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

HIN241IBZ

✅ Drop-In
📦 28-pin SOIC
Compatible RS-232 alternative with 1 receiver rather than 5, reducing available receiver channels by 4 and leaving four original receiver positions unused.

📋 חלופה להתייחסות (לא בקטלוג)

HIN241CBZ-T

✅ Drop-In
📦 28-pin SOIC
Compatible 28-pin RS-232 replacement with 1 receiver instead of 5; the four additional receiver inputs on an ADM241LJRZ design require no-connect treatment.

📋 חלופה להתייחסות (לא בקטלוג)

HIN241IB

✅ Drop-In
📦 28-pin SOIC
Compatible RS-232 alternative with 1 receiver rather than 5; verify unused receiver pins and package dimensions on the assembled PCB.

📋 חלופה להתייחסות (לא בקטלוג)

ADM241LJRZ מפרטים

Product Type RS-232 line transceiver
Number of Drivers 4
Number of Receivers 5
Nominal Supply Voltage 5 V
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 120 kB/s
RS-232 Output Swing ±9 V
Charge-Pump Capacitor Value 1 µF
Interface Standards EIA-232-E and V.28
Shutdown Feature Low-power shutdown mode
מארז 28-pin SOIC
Package Width 7.50 mm
סוג הרכבה Surface mount
Logic Technology CMOS

מדריך תצורת פינים של ADM241LJRZ 7.50 mm

תצורת פינים עבור ADM241LJRZ (מארזת 7.50 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 7.50 mm עבור ADM241LJRZ

אין נתוני פריסת פינים מפורטים עבור ADM241LJRZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADM241LJRZ מתאים עבור 6 יישוםs: Industrial Control Systems, Point-of-Sale Terminals, Test and Measurement Equipment, Data Acquisition Systems, Security and Access Equipment, Embedded Serial Interfaces.

🏭

Industrial Control Systems

The ADM241LJRZ fits legacy industrial controllers that must communicate with several RS-232 peripherals from one 5 V supply. Four drivers support four outgoing command or control channels, while five receivers accept up to five incoming data signals at rates as high as 120 kB/s. Its integrated DC-DC converters eliminate the need for a separate ±12 V supply and produce approximately ±9 V RS-232 output swing. Because the interface is not intended to carry high-speed signals, route the RS-232 conductors away from sensitive analog nodes and place transient protection at the external connector. The low-power shutdown mode can also reduce consumption when the controller does not need active communication.

🖥️

Point-of-Sale Terminals

Point-of-sale equipment often combines cash drawers, scanners, printers, and customer displays on multiple RS-232 ports. The ADM241LJRZ provides four driver outputs and five receiver inputs, allowing several of those links to share one interface IC. Operation from 4.5 V to 5.5 V suits compact systems that already distribute a regulated 5 V rail, and the 120 kB/s maximum rate exceeds the throughput normally required for transaction peripherals. The approximately ±9 V swing supports RS-232 signaling without a separate bipolar supply. In a retail enclosure, add connector-side surge protection because users may attach and disconnect external cables while the terminal is operating.

🔧

Test and Measurement Equipment

The ADM241LJRZ is suitable for laboratory instruments and automated test equipment that retain RS-232 ports for legacy instruments, service interfaces, or fixture controllers. Its four transmit and five receive channels can reduce the number of separate interface ICs required when several instruments must share a controller. The 120 kB/s rate is appropriate for command and measurement transfer, while the single 5 V supply simplifies integration with modern digital control hardware. Keep the interface's charge-pump supply return close to the device and observe the manufacturer's component-placement recommendations to prevent converter noise from coupling into precision measurement circuitry.

📡

Data Acquisition Systems

Data-acquisition controllers can use the ADM241LJRZ to connect legacy sensors, signal conditioners, and laboratory modules over RS-232. Five receiver inputs are useful for monitoring several peripheral statuses, while four drivers can send commands to independently addressed devices. The 120 kB/s limit suits legacy telemetry and configuration traffic rather than bulk sensor streaming. Its integrated charge pump allows operation from a single 5 V rail, which helps systems where generating ±12 V would increase power and board complexity. Place the interface away from high-gain analog front ends, use a continuous ground reference with the RS-232 conductors, and protect external connectors from industrial transients.

🎥

Security and Access Equipment

Access-control and security equipment can use the ADM241LJRZ for legacy readers, controllers, alarm panels, or configuration links that implement RS-232. Four driver channels and five receiver channels support bidirectional equipment combinations without requiring one transceiver per link. The single 5 V operating range is practical for embedded systems that already use a regulated 5 V control rail, while the specified 120 kB/s data rate is appropriate for command traffic and status reporting. Secure implementations should also include the required external line protection and ensure that exposed RS-232 connectors are not used as general-purpose network interfaces without appropriate isolation and enclosure controls.

🧩

Embedded Serial Interfaces

Embedded control boards can use the ADM241LJRZ when an existing product revision includes RS-232 connectors but the available supply rail is only 5 V. Four outputs and five inputs provide enough channels for several embedded modules, and the 120 kB/s maximum is suitable for configuration, diagnostics, and firmware-command interfaces. Integrated DC-DC converters remove the need for a separate negative supply while maintaining approximately ±9 V line swing. Designers should reserve space around the 28-pin SOIC for the specified 1 µF charge-pump capacitors and follow the manufacturer's pin table so every unused receiver input is handled explicitly.

סיכום מוצרים מומלצים

MAX211ECWI Compatible single-supply four-driver, five-receiver RS-232 alternative בשימוש ב-: Industrial Control Systems, Point-of-Sale Terminals, Test and Measurement Equipment, Security and Access Equipment HIN241IBZ Compatible RS-232 interface alternative with fewer receiver channels בשימוש ב-: Industrial Control Systems, Data Acquisition Systems, Embedded Serial Interfaces HIN211CB-T Compatible single-supply RS-232 interface option בשימוש ב-: Point-of-Sale Terminals, Security and Access Equipment HIN241CBZ-T Compatible RS-232 replacement option בשימוש ב-: Test and Measurement Equipment, Embedded Serial Interfaces HIN241IB Compatible RS-232 interface alternative בשימוש ב-: Data Acquisition Systems
What are the key specifications of ADM241LJRZ that engineers should know?
The ADM241LJRZ is a 5 V RS-232 transceiver with four drivers, five receivers, a maximum data rate of 120 kB/s, approximately ±9 V output swing, and a 28-pin SOIC package. Analog Devices identifies it as a low-power CMOS transceiver for EIA-232-E and V.28 interfaces. Its integrated DC-DC converters permit single-supply operation without an external ±12 V source.
Where can I download the ADM241LJRZ datasheet PDF?
The official ADM241LJRZ product information and datasheet are available from Analog Devices through the ADM241L product page at analog.com. The manufacturer page identifies a single 5 V supply, 120 kB/s operation, approximately ±9 V output swing, and the use of small 1 µF charge-pump capacitors. Use the manufacturer datasheet for the complete pin-description table, absolute-maximum ratings, and recommended application circuit.
Where can I find the ADM241LJRZ pinout?
The ADM241LJRZ pin assignments are documented in the Analog Devices ADM241L datasheet under the pin-description and connection-diagram sections. The component uses a 28-pin SOIC package, but no complete pin table appears on the product-page summary. Before assigning PCB tracks, use the manufacturer pin-description table to identify every power, ground, driver-output, receiver-input, and charge-pump capacitor connection.
What supply voltage does ADM241LJRZ require?
The ADM241LJRZ operates from a single 4.5 V to 5.5 V supply, with 5 V as the nominal operating voltage. According to the Analog Devices product page, on-board DC-DC converters produce the bipolar voltage needed for RS-232 signaling from this supply. The stated approximately ±9 V output swing eliminates the need for a separate ±12 V supply in the target interface.
How fast can the ADM241LJRZ transmit RS-232 data?
The ADM241LJRZ supports data rates up to 120 kB/s. This rate is appropriate for legacy RS-232 control links, point-of-sale equipment, industrial controllers, and instrumentation rather than modern high-speed serial protocols. Analog Devices specifies the device for EIA-232-E and V.28 interfaces, allowing designers to use the 120 kB/s figure as the headline rate when planning a compatible UART link.
How many RS-232 drivers and receivers does ADM241LJRZ provide?
The ADM241LJRZ provides four RS-232 drivers and five receivers in one 28-pin SOIC device. This 4/5 organization allows one interface IC to handle four outgoing and five incoming RS-232 channels. Analog Devices describes the ADM2xx family as line drivers and receivers for EIA-232-E and V.28 communications interfaces.
What is the best drop-in replacement for ADM241LJRZ?
The ADM241LJRZ can be replaced by compatible 28-pin RS-232 transceivers such as HIN211CB-T, MAX211ECWI, HIN241IBZ, HIN241CBZ-T, or HIN241IB, subject to channel-count and pin-function checks. Cross-reference guidance identifies these as compatible alternatives, but the receiver count differs in the single-receiver HIN211 and HIN241 families. Confirm every signal and capacitor connection against the selected part's datasheet before production use.
What can replace ADM241LJRZ on an existing RS-232 board?
A valid replacement must use a pin-compatible 28-pin RS-232 interface and match the original board's power, capacitor, shutdown, and signal assignments. HIN211CB-T, MAX211ECWI, HIN241IBZ, HIN241CBZ-T, and HIN241IB are identified as compatible alternatives, but several have fewer receivers than the ADM241LJRZ. Treat an unqualified or unused receiver input as a deliberate no-connect unless the replacement datasheet specifies otherwise.
Is ADM241LJRZ suitable for an industrial RS-232 controller?
The ADM241LJRZ is suitable for a legacy RS-232 controller requiring four transmit channels and five receive channels at up to 120 kB/s. Its 4.5 V to 5.5 V single-supply operation and integrated DC-DC converters simplify systems without ±12 V rails. For industrial deployment, add appropriate connector-side surge and ESD protection because the transceiver itself does not eliminate external cable transients.
When should I choose ADM241LJRZ over MAX211ECWI?
Choose the ADM241LJRZ when a design specifically requires the documented 4/5 channel organization and Analog Devices' low-power shutdown feature. MAX211ECWI is also identified as a compatible 28-pin RS-232 option, but replacement decisions should follow its detailed pin and capacitor assignments. The practical differentiator is the verified electrical and pin-function match for the target PCB, not the MPN alone.
Is the ADM241LJRZ the same as MAX211ECWI?
The ADM241LJRZ and MAX211ECWI are related single-supply RS-232 transceivers, but they are different manufacturer parts and should not be treated as identical without a pin-by-pin review. Cross-reference information lists MAX211ECWI among compatible alternatives for the ADM241LJRZ. Verify package dimensions, supply range, driver and receiver assignments, shutdown behavior, and charge-pump capacitor connections against both manufacturer datasheets.
What is the best HIN-compatible equivalent for ADM241LJRZ?
HIN241IBZ, HIN241CBZ-T, and HIN241IB are identified as compatible alternatives to the ADM241LJRZ. Because these alternatives use fewer receiver channels than the four-driver, five-receiver ADM241LJRZ, they are most appropriate when the board does not use all five receiver inputs or when unused inputs can be left unconnected. Confirm package geometry and capacitor values before substituting them.
Where can I buy ADM241LJRZ and check its current lead time?
Use the Request a Quote form on this ADM241LJRZ product page to request current availability, order quantity, and lead time for the exact 28-pin SOIC device. Stock and lead time can vary by lot, quantity, and shipment destination, so request a written quotation rather than relying on a historical catalog listing. The request should include the target ADM241LJRZ MPN and required quantity.
What is the price of ADM241LJRZ?
Use the Request a Quote form on this page for the current unit price and quantity breaks for the exact ADM241LJRZ. Distributor and reseller listings do not provide a consistent quote for every order quantity, and prices change with market conditions, volume, and requested delivery terms. Submit the MPN, quantity, and packaging requirement to obtain a current response.
Is ADM241LJRZ currently in stock?
The Request a Quote form on this page is the appropriate route for current stock confirmation because inventory changes with order volume and replenishment timing. Request availability for the exact ADM241LJRZ rather than the ADM241LJRZ-REEL packaging designation. Include the required quantity and delivery location so the quotation can reflect realistic supply and logistics conditions.

נתוני עזר הנדסיים עבור ADM241LJRZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADM241LJRZ when an existing design requires a single-supply RS-232 interface with four driver outputs, five receiver inputs, operation from 4.5 V to 5.5 V, and a documented maximum rate of 120 kB/s. MAX211ECWI is the closest listed alternative because it also provides four drivers and five receivers, although its specified 0.1 µF charge-pump capacitors differ from the ADM241LJRZ's 1 µF requirement. HIN211CB-T, HIN241IBZ, HIN241CBZ-T, and HIN241IB are appropriate only when one receiver channel is sufficient and the remaining original receiver connections can be left unused. For all substitutions, verify package dimensions, supply limits, pin functions, shutdown logic, capacitor values, and exposed connector protection before approving the change.

השוואה עם חלופות

פרמטר מוצר זה HIN211CB-T MAX211ECWI HIN241IBZ HIN241CBZ-T HIN241IB
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC
Brand Analog Devices HIN241 Maxim Integrated HIN241 HIN241 HIN241
Number of Drivers 4 4 4 4 4 4
Number of Receivers 5 1 5 1 1 1

מבדילים עיקריים

  • Five receiver channels in the original interface (לעומתHIN211CB-T)
  • Direct four-driver, five-receiver channel organization (לעומתMAX211ECWI)
  • Single 5 V supply with approximately ±9 V swing (לעומתHIN241IBZ)
  • Low-power shutdown operation (לעומתHIN241CBZ-T)

הערות תכנון

Place the charge-pump capacitors and supply bypass capacitor directly beside their associated ADM241LJRZ pins, following the Analog Devices datasheet layout. Keep these high-current switching paths compact and avoid routing them beneath sensitive analog inputs. The documented 1 µF charge-pump capacitor value should not be changed without reviewing the corresponding data sheet because stability and output-swing performance depend on the recommended network.

Route each RS-232 driver and receiver path away from clocks, precision analog inputs, and switching power-converter nodes. The 120 kB/s maximum is appropriate for legacy RS-232, but edge-rate harmonics can still couple into nearby circuitry. Maintain a continuous interface-ground reference with the cable, keep return-current paths short, and use a solid ground plane where practical.

Do not assume every 28-pin RS-232 transceiver is electrically interchangeable. HIN211CB-T and the HIN241 alternatives provide fewer receivers than the ADM241LJRZ, while MAX211ECWI uses 0.1 µF capacitors compared with the ADM241LJRZ value of 1 µF. Check every pin, capacitor value, supply range, shutdown connection, and package dimension before approving a replacement.

The integrated DC-DC converter removes the need for a ±12 V supply but does not protect the interface from external cable transients. Place suitable RS-232 line protection at the connector, with its return connection arranged to prevent surge current from flowing through sensitive board ground paths. Validate the protection threshold against the interface's absolute-maximum ratings before production release.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The ADM241L interface IC is not an automotive-qualified power device, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the available manufacturer page.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADM241LJRZ datasheet ADM241LJRZ pinout ADM241LJRZ datasheet pdf ADM241LJRZ equivalent ADM241LJRZ replacement ADM241LJRZ cross reference ADM241LJRZ vs MAX211ECWI ADM241LJRZ price ADM241LJRZ stock Analog Devices ADM241LJRZ ADM241LJRZ 28-SOIC footprint ADM241LJRZ RS-232 application circuit

רכיבים ומונחים קשורים

Analog Devices ADM241LJRZ ADM241L HIN211CB-T MAX211ECWI HIN241IBZ HIN241CBZ-T HIN241IB RS-232 transceiver line driver line receiver interface IC communications IC EIA-232-E V.28 CMOS DC-DC converter charge-pump capacitor 28-pin SOIC SOIC package family surface-mount package 120 kB/s 5 V supply RS-232 output swing industrial control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר