APA150-TQ100A - 150K Gate Flash FPGA | Microchip Technology
MPN: APA150-TQ100A ✓ פעילAPA150-TQ100A סקירה
A field-programmable gate array is a programmable digital logic device that combines configurable logic fabric with programmable I/O and embedded memory. Within the product hierarchy, an FPGA belongs to the broader semiconductor and programmable-logic categories, while ProASICPLUS adds nonvolatile flash configuration memory. Because the configuration is stored in flash, the APA150-TQ100A can be reprogrammed and is live at power-up without an external configuration PROM.
Key features include 150,000 equivalent system gates, 6,144 logic cells, 66 user I/O, and 36,864 bits of RAM. The device belongs to the APA150 family and uses an ASIC-oriented design flow that supports migration from programmable logic toward a custom ASIC implementation. Its automotive-temperature designation makes it suitable for industrial and transportation equipment requiring reliable operation over an extended temperature range.
The APA150 architecture organizes programmable resources into logic and memory structures with dedicated configuration and programming functions. Flash-based configuration preserves the programmed bitstream after power removal and supports field updates, while live-at-power-up operation eliminates the external PROM and associated configuration delay encountered by SRAM-based FPGAs. Designers must still observe the specified core, I/O, and power-supply sequencing requirements from the manufacturer datasheet.
Typical uses include industrial control and automation, embedded instrumentation, communications interfaces, networked equipment, and transportation electronics. The 66 available I/O pins are suitable for moderate-width parallel buses, digital sensor aggregation, status and control signaling, and peripheral interfaces such as SPI, I2C, or parallel processor-style interfaces when their supported I/O standards are compatible with the design.
For PCB layout, place all bypass capacitors close to their corresponding supply pins and route configuration, programming, and clock signals away from high-current switching nodes. Validate signal integrity and timing with the speed grade used in the final design. The TQFP package offers a large, inspectable lead pitch that is practical for prototype assembly, but it occupies substantially more board area than a fine-pitch BGA or QFP alternative.
This page combines device specifications, family-level alternatives, application guidance, and board-level design considerations in one engineering reference. It also identifies which replacement candidates retain the 100-pin package and where temperature-grade changes require explicit design review before substitution.
חלופות תחליף ישיר עבור APA150-TQ100A — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם APA150-TQ100A (אותו גורם צורה וטביעת רגל) — שונים ב Package, System Gates, External System Performance, Logic Cells, Operating Temperature.
APA150-TQ100
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←APA150-TQ100I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←APA150-TQG100A
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
APA150-TQG100I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
APA150-FTQG100
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
APA150-TQ100A דירוגים מרביים ומאפיינים חשמליים
| Product Type | ProASICPLUS field-programmable gate array (FPGA) |
| System Gates | 150,000 gates |
| Logic Cells | 6,144 cells |
| User I/O | 66 I/O |
| RAM Capacity | 36,864 bits |
| Core Supply Voltage Range | 2.375 V to 2.625 V |
| Configuration Memory | Nonvolatile flash |
| Configuration Feature | Reprogrammable and live at power-up |
| Logic Technology | CMOS |
| מארז | 100-pin TQFP |
| Package Dimensions | 14 x 14 mm |
| סוג הרכבה | Surface mount |
| טווח טמפרטורת פעולה | -40 C to 125 C |
| Temperature Grade | Automotive temperature |
| Design Flow | ASIC-oriented ProASICPLUS flow |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
מדריך תצורת פינים של APA150-TQ100A 14 x 14 mm
תצורת פינים עבור APA150-TQ100A (מארזת 14 x 14 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור APA150-TQ100A.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
APA150-TQ100A מתאים עבור 6 יישוםs: Industrial Automation and PLC Control, Embedded Communications Interface, Transportation and Vehicle Electronics, Data Acquisition and Instrumentation, Secure Device and Access-Control Logic, LED Display and Illumination Control.
Industrial Automation and PLC Control
The APA150-TQ100A fits compact industrial control modules that combine sensor conditioning, machine-state logic, and external bus arbitration. Its 6,144 logic cells and 36,864 bits of RAM provide enough resources for parallel data acquisition, state machines, protocol conversion, and safety interlocks without requiring an application-specific ASIC. The -40 C to 125 C rating supports factory-floor equipment, while flash configuration preserves the control program across power cycles. Engineers should verify individual I/O standards, timing margins, and supply sequencing against the manufacturer datasheet, and isolate external field wiring from sensitive logic.
מומלץ
Embedded Communications Interface
APA150-TQ100A can implement protocol bridges, packet routers, and legacy peripheral interfaces where deterministic parallel logic and flexible I/O are more important than a large embedded processor. The 66 user I/O are useful for framing signals, clock-domain control, flow management, and status multiplexing across a communications module. Its 150,000-system-gate fabric also allows parallel datapath functions to be combined with small state machines in one device. Because timing and I/O behavior depend on the selected speed grade, engineers should use the published timing reports and external buffering when driving long traces or high-speed off-board links.
מומלץ
Transportation and Vehicle Electronics
The APA150-TQ100A is appropriate for transportation modules that perform logic consolidation, I/O decoding, sensor fusion, or redundant monitoring around a host microcontroller. Its -40 C to 125 C automotive-temperature designation is the primary reason to select the A suffix, while the nonvolatile flash configuration permits controlled field reprogramming. The 100-pin TQFP package is inspectable and compatible with prototype and moderate-volume assembly methods. Automotive adoption still requires system-level review of transient protection, electromagnetic compatibility, communication interfaces, and the qualification expectations applicable to the finished vehicle platform.
מומלץ
Data Acquisition and Instrumentation
APA150-TQ100A supports parallel data-acquisition front ends where many digital channels must be captured, filtered, timestamped, or packed into a serial stream. Its 66 user I/O can accommodate sample-enable signals, multiplexed data buses, trigger inputs, and status outputs, while embedded RAM stores temporary frames or buffering state. The flash-based configuration simplifies field updates and ensures that the acquisition logic is immediately available after power restoration. Designers should establish input-slew, capacitance, and timing budgets at the actual board level, because the FPGA timing model does not replace input-buffer or external-driver analysis.
מומלץ
Secure Device and Access-Control Logic
APA150-TQ100A can implement dedicated credential handling, key-peripheral interfacing, tamper-response logic, and audit-sequence enforcement around a higher-level microcontroller. Its reprogrammable flash configuration supports controlled firmware or bitstream updates, while the 36,864 bits of RAM provide working storage for counters, buffers, and protocol state. The device should not be treated as inherently secure; challenge-response, key-storage, and anti-tamper protections still require an appropriate architecture and implementation. Security-critical designs also need careful review of programming access, update procedures, fault injection, and lifecycle management.
מומלץ
LED Display and Illumination Control
APA150-TQ100A is suitable for multiplexed display drivers, illumination controllers, and status panels where timing, refresh sequencing, and fault monitoring must run deterministically. The 66 user I/O can drive row and column decode logic, brightness-control interfaces, and sensor inputs, while embedded RAM can hold display patterns or animation sequences. Flash configuration enables field adjustment of panel mapping and timing without removing the board. Engineers must size the drive transistors and account for inrush current, grounding, and electromagnetic-interference coupling, especially when many high-current LED edges share a switching node.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור APA150-TQ100A — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | APA150-TQ100 | APA150-TQ100I | APA150-TQG100A | APA150-TQG100I | APA150-FTQG100 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-lead PQFP, 0.5 mm pitch |
| System Gates | 150,000 gates | 150,000 gates | 150,000 gates | 150,000 gates | 150,000 gates | 150,000 gates |
| Configuration Memory | Nonvolatile flash, reprogrammable | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
מבדילים עיקריים
- Automotive-temperature selection within the APA150 family (לעומתAPA150-TQ100I)
- Flash-based reprogrammability and live-at-power-up operation (לעומתAPA150-FTQG100)
- Balanced logic, memory, and I/O resources for embedded control (לעומתAPA150-TQ100)
הערות תכנון
Use the manufacturer’s recommended core and I/O supply circuits rather than deriving the rail plan from the single 2.375 V to 2.625 V core figure. Place the required bypass capacitors adjacent to their assigned VDD and VSS pins, provide adequate source current for configuration activity, and separate sensitive analog or reference routing from digital switching paths. Confirm power-up and power-down sequencing because the available documentation does not establish one universal sequence for every APA150 package option.
Assign the footprint from the official APA150-TQ100 package drawing rather than from a generic 100-pin library symbol. Check pin-one orientation, 14 x 14 mm body dimensions, terminal pitch, exposed-pad treatment, and the manufacturer’s land-pattern recommendations. Keep programming, configuration, clock, and JTAG-related routes away from high-current switching nodes, and provide test points so configuration status and power rails can be checked during bring-up.
Do not treat the TQ, TQG, I, A, and FT suffix codes as interchangeable without checking the full ordering table. The A version is documented for automotive temperature, the I version identifies industrial temperature, and the FT candidate changes the speed designation. Also verify whether a purchasing channel is supplying factory-new programmed material or a previously programmed device, because the flash configuration state can affect incoming inspection and field-update procedures.
Create an external timing budget that includes the FPGA clock, configuration startup, board propagation delay, and the receiving device’s setup and hold requirements. Use the published timing report for the selected speed grade and check worst-case clock skew rather than relying only on the nominal frequency. For long or noisy nets, add source-series termination, a buffer, or a proper clock distribution network, especially when the same fabric drives external instrumentation or long ribbon-cable connections.
מידע על תאימות
The automotive-temperature suffix does not by itself establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed on the manufacturer product page or in the current material declaration.