Silicon Labs

C8051F382-GQ - 50MHz USB Flash MCU | Silicon Labs

MPN: C8051F382-GQ ✓ פעיל
2.7 V to 5.25 V Vdss 48-pin TQFP (7 x 7 mm) Package 50 MHz Speed 32 KB (32K x 8 bits) Memory
כמות הזמנה מינימלית: 1 |

C8051F382-GQ סקירה

The Silicon Labs C8051F382-GQ is an 8-bit C8051F38x full-speed USB flash microcontroller rated at 50 MHz, or 48 MIPS, with 32 KB of program flash and 2.25K x 8 bits of RAM in a 48-pin TQFP (7 x 7 mm) package. It operates from 2.7 V to 5.25 V and supports temperatures from -40 °C to +85 °C.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces onto one device. The C8051F38x family belongs to the 8-bit microcontroller hierarchy and combines a 8051-compatible CISC architecture with flash memory, analog conversion, and USB connectivity. Silicon Labs describes the family as a pin- and code-compatible replacement for the C8051F34x family in most applications.

The C8051F382-GQ provides 32 KB of flash for firmware and 2.25K x 8 bits of internal RAM, reducing the need for external program-memory devices. Its full-speed USB interface supports USB-connected peripheral and control products, while the listed analog capability includes a built-in multiplexer and conversion rates up to 500 ksps. The 2.7 V to 5.25 V supply range permits operation from regulated 3.3 V or 5 V system rails.

The device uses the 8051 CISC architecture and operates at up to 50 MHz, corresponding to the listed 48 MIPS performance figure. A 48-pin TQFP package provides a conventional fine-pitch surface-mount option for industrial and embedded control boards. Because the MCU combines USB, flash, RAM, timers, and analog functions, firmware can remain compact while designers minimize the number of external components.

Typical uses include USB data acquisition, industrial control interfaces, USB-to-serial equipment, human-interface devices, embedded instrumentation, and portable USB-powered products. The integrated analog conversion capability is useful for monitoring sensors through the internal multiplexer, while full-speed USB simplifies host connectivity over a standard peripheral port.

PCB design should reserve the full 48-pin TQFP land pattern, route USB D+ and D- as a controlled impedance differential pair, and place decoupling capacitors close to the supply pins. Firmware migration requires checking peripheral availability, interrupt-vector behavior, clock configuration, and USB firmware compatibility rather than relying only on package matching.

This page combines the device specifications, verified family relationships, practical application guidance, package constraints, and engineering-focused replacement analysis to support faster component selection and board planning.

חלופות תחליף ישיר עבור C8051F382-GQ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם C8051F382-GQ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type.

Silicon Labs
Package: 48-pin TQFP (7 x 7 mm)
השווה עם C8051F382-GQ →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Product Type: 8-bit 8051 CISC microcontroller
השווה עם C8051F382-GQ →

C8051F380-GQ

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
8-bit 8051-compatible flash MCU · 48 MIPS · 64KB (64K x 8) · 50 MHz · 2.7 V to 5.25 V · USB 2.0 compliant · 12 Mbps full speed or 1.5 Mbps low speed

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

C8051F383-GQ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 48-pin TQFP (7 x 7 mm)
64 KB flash versus 32 KB, a 100% increase; the 50 MHz clock rating is unchanged

📋 חלופה להתייחסות (לא בקטלוג)

C8051F384-GQ

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
8-bit 8051 CISC microcontroller · C8051F38x · 48 MIPS · 48 MHz · 64KB (64K x 8) · 4.25K x 8 · 2.7 V to 5.25 V · 2.5 V or 3.3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

C8051F38C-GQ

✅ Drop-In
📦 48-pin TQFP (7 x 7 mm)
64 KB flash versus 32 KB, a 100% increase; the 50 MHz clock rating is unchanged

📋 חלופה להתייחסות (לא בקטלוג)

C8051F387-GQ

✅ Drop-In
📦 48-pin TQFP (7 x 7 mm)
64 KB flash versus 32 KB, a 100% increase; the 50 MHz clock rating is unchanged

📋 חלופה להתייחסות (לא בקטלוג)

C8051F382-GQ דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit Flash USB Microcontroller
Series C8051F38x
CPU Architecture 8051-compatible CISC
תדר שעון מקסימלי 50 MHz
Maximum Instruction Rate 48 MIPS
Program Flash Memory 32 KB (32K x 8 bits)
Internal RAM 2.25K x 8 bits
USB Interface Full-speed USB
Analog Conversion Rate Up to 500 ksps
Analog Multiplexer Built-in single-ended analog multiplexer
Supply Voltage Range 2.7 V to 5.25 V
טווח טמפרטורת פעולה -40 °C to +85 °C
מארז 48-pin TQFP (7 x 7 mm)
סוג הרכבה Surface Mount
Factory Pack Quantity 1250 units

מדריך תצורת פינים של C8051F382-GQ 48-pin tqfp (7 x 7 mm)

תצורת פינים עבור C8051F382-GQ (מארזת 48-pin tqfp (7 x 7 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 48-pin tqfp (7 x 7 mm) עבור C8051F382-GQ

אין נתוני פריסת פינים מפורטים עבור C8051F382-GQ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

C8051F382-GQ מתאים עבור 6 יישוםs: USB Data-Acquisition Controller, Industrial USB Sensor Interface, USB Human-Interface Device, USB-to-Serial Embedded Bridge, Portable USB-Powered Test Instrument, Embedded Control and Monitoring Node.

🖥️

USB Data-Acquisition Controller

The C8051F382-GQ fits a USB data-acquisition controller that combines local sensor conditioning, digital processing, and host communication in one device. Its 50 MHz 8051-compatible core and 48 MIPS operating rate provide timing capacity for sampling control and USB service tasks, while 32 KB of flash stores application firmware and descriptors. The built-in analog multiplexer and conversion capability up to 500 ksps support multiplexed measurement channels without requiring a separate converter. Full-speed USB simplifies attachment to a computer or embedded host. Design the analog front end for the selected voltage range, protect analog inputs against transients, and validate sampling accuracy and USB enumeration timing with the production firmware.

🏭

Industrial USB Sensor Interface

The C8051F382-GQ is appropriate for an industrial USB sensor interface that must collect measurements, apply local logic, and present a standard host interface. Its operating range of 2.7 V to 5.25 V supports common regulated industrial rails, while its -40 °C to +85 °C rating accommodates temperature-controlled equipment. The integrated analog multiplexer helps reduce external component count when several sensor signals must be scanned. Firmware can run directly from 32 KB of flash, and 2.25K x 8 bits of RAM supports acquisition buffers and protocol state. Designers should calibrate each channel, isolate noisy motors or relays from analog circuitry, and confirm that the enclosure and USB connector preserve reliable communications in the intended environment.

🔧

USB Human-Interface Device

The C8051F382-GQ can implement a USB human-interface device such as a control panel, configuration interface, or specialized input device. Full-speed USB provides a direct host connection, while the 50 MHz core allows responsive debouncing, status updates, and protocol handling. The 32 KB flash capacity is useful for compact firmware containing USB descriptors, HID reports, configuration logic, and upgrade routines. Its 48-pin TQFP package is appropriate for multilayer or densely routed boards, but the 7 x 7 mm body requires careful fanout and paste inspection. Validate enumeration across the target operating systems, confirm report timing, and keep ESD protection close to the connector while preserving controlled-impedance USB routing.

🌐

USB-to-Serial Embedded Bridge

The C8051F382-GQ is well suited to a USB-to-serial bridge that translates between a full-speed USB host and an embedded UART interface. Its 8051-compatible core can support protocol conversion, framing, buffering, and device management, while 32 KB of flash is sufficient for many compact bridge designs. The 2.7 V to 5.25 V operating range accommodates both 3.3 V and 5 V interface environments when levels are selected correctly. Because the part integrates USB and analog functions, firmware can also add local control or monitoring. Use a level translator for mismatched serial voltages, define USB descriptors carefully, and test throughput, suspend behavior, and bus-powered current against the complete peripheral load.

🧩

Portable USB-Powered Test Instrument

The C8051F382-GQ supports a portable USB-powered test instrument where a compact controller, measurement function, and USB connection are required. Its 50 MHz processing rate supports deterministic control and data handling, and 32 KB of flash accommodates firmware for a focused measurement product. The internal analog multiplexer and 500 ksps conversion capability can support fast sampled measurements when the analog front end has suitable bandwidth and settling behavior. Operation from 2.7 V permits flexible use of low-voltage power systems. Designers should budget regulator dropout and transient response, limit analog input overdrive, and test enumeration and measurement accuracy with the final enclosure, cable, and power source.

🏭

Embedded Control and Monitoring Node

The C8051F382-GQ can serve as the central controller in a compact monitoring node that reads analog inputs, evaluates thresholds, records events, and exposes status through USB. Its integrated 32 KB flash reduces external program-memory requirements, and its 50 MHz core leaves processing headroom for diagnostics and communication routines. The -40 °C to +85 °C rating supports industrial and commercial equipment, while 2.7 V to 5.25 V operation provides flexibility across regulated rails. Keep sensitive analog paths away from USB and switching traces, provide local decoupling at the supply pins, and include recovery logic for brownout or disconnected-bus conditions so the node returns to a predictable state after power restoration.

סיכום מוצרים מומלצים

C8051F384-GQ Silicon Labs בשימוש ב-: USB Data-Acquisition Controller, USB Human-Interface Device, Portable USB-Powered Test Instrument C8051F38C-GQ Same-family full-speed USB microcontroller option בשימוש ב-: USB Data-Acquisition Controller, USB-to-Serial Embedded Bridge C8051F380-GQ Silicon Labs בשימוש ב-: Industrial USB Sensor Interface, USB-to-Serial Embedded Bridge C8051F387-GQ Same-family controller option for expanded firmware capacity בשימוש ב-: Industrial USB Sensor Interface, Portable USB-Powered Test Instrument, Embedded Control and Monitoring Node C8051F383-GQ Same-family option for designs requiring additional firmware space בשימוש ב-: USB Human-Interface Device C8051F381-GM Silicon Labs בשימוש ב-: Embedded Control and Monitoring Node
What is the operating voltage of C8051F382-GQ?
The C8051F382-GQ operates from 2.7 V to 5.25 V. According to the Silicon Labs C8051F38x datasheet, this range supports both regulated 3.3 V and 5 V systems. Designers should verify the voltage limits of every connected peripheral, select bypass capacitors appropriate for the operating frequency, and ensure that USB signaling remains within the limits specified by the selected USB interface components.
What are the key specifications of C8051F382-GQ?
The C8051F382-GQ is a 50 MHz, 8-bit C8051F38x microcontroller with 48 MIPS performance, 32 KB of flash, 2.25K x 8 bits of RAM, and full-speed USB. According to the Silicon Labs datasheet, it is packaged in a 48-pin TQFP measuring 7 x 7 mm and operates from 2.7 V to 5.25 V over -40 °C to +85 °C. Its integrated analog multiplexer supports conversion rates up to 500 ksps.
What is the maximum clock frequency of C8051F382-GQ?
The C8051F382-GQ has a maximum clock frequency of 50 MHz and is listed at 48 MIPS. The 8051-compatible CISC core executes instructions from its integrated flash memory, so the system clock also affects USB timing, analog-conversion timing, and peripheral scheduling. Use the oscillator and clock-tree configuration described in the Silicon Labs C8051F38x datasheet to establish the correct operating mode.
How much flash and RAM does C8051F382-GQ have?
The C8051F382-GQ contains 32 KB, or 32K x 8 bits, of program flash and 2.25K x 8 bits of internal RAM. The 32 KB figure is also shown in the Silicon Labs product listing, while the RAM size appears in the device specification listing. These capacities should be checked against bootloader, application, USB descriptor, interrupt, and stack requirements before firmware is committed.
Does C8051F382-GQ support full-speed USB?
Yes. The C8051F382-GQ includes a full-speed USB interface as part of the C8051F38x family. According to the Silicon Labs datasheet, the family combines the 8051-compatible core with flash memory and USB connectivity. Board implementation still requires correct differential-pair routing, controlled impedance, suitable USB transceiver circuitry, and firmware compatible with the selected USB device class.
Where can I download the C8051F382-GQ datasheet PDF?
The official C8051F38x datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F38x.pdf. It covers the C8051F382-GQ and the related family members. Use its pin-description table for board routing, its electrical-characteristics section for operating limits, and its peripheral chapters when validating USB, clock, analog, and power-management behavior.
Where can I find the C8051F382-GQ pinout?
The C8051F382-GQ pinout is shown in the Silicon Labs C8051F38x datasheet, using the 48-pin TQFP package. The package has 48 physical positions, and the manufacturer datasheet remains the authoritative source for signal names, power pins, ground pins, and special-function assignments. Use that pin table when assigning PCB nets and checking USB, oscillator, reset, programming, and supply connections.
Can C8051F382-GQ be used in industrial USB data-acquisition equipment?
The C8051F382-GQ is suitable for industrial USB data-acquisition equipment that benefits from local control and a compact 48-pin TQFP footprint. Its 50 MHz core, 32 KB flash, full-speed USB, and analog conversion capability up to 500 ksps allow sensing, local control, and host communication in one device. The -40 °C to +85 °C rating supports industrial-temperature designs, subject to system-level validation.
C8051F382-GQ vs C8051F380-GQ - which is better for a USB controller?
Choose C8051F382-GQ when 32 KB of flash is important, while C8051F380-GQ provides a smaller memory option for simpler firmware. Both belong to the 8051 C8051F38x family, but their flash capacities differ by 16 KB, equivalent to a 50% increase for the C8051F382-GQ. Confirm clock, USB, analog, pin, and software requirements in the family datasheet before making the final choice.
C8051F382-GQ vs C8051F384-GQ - when should I choose the larger-memory device?
Choose C8051F384-GQ when firmware, USB descriptors, protocol tables, or application logic require more flash than the C8051F382-GQ provides. The C8051F384-GQ offers 64 KB of flash compared with 32 KB for the C8051F382-GQ, a 32 KB or 100% increase, while both belong to the same C8051F38x family. Confirm the remaining electrical and peripheral requirements before replacing one device with the other.
When should I choose C8051F382-GQ over a larger C8051F38x device?
Choose C8051F382-GQ when 32 KB of flash is sufficient, USB and analog functions meet the design requirements, and minimizing firmware and system complexity is a priority. It provides the same listed 50 MHz clock, 48 MIPS rate, full-speed USB, 2.25K x 8 bits of RAM, and 48-pin TQFP format as the larger-memory alternatives examined here. Select a larger member only when additional flash or confirmed peripheral features are required.
Is C8051F382-GQ suitable for a USB-powered embedded product?
The C8051F382-GQ can be used in a USB-powered embedded product when the design operates within its 2.7 V to 5.25 V supply range. Its full-speed USB interface and 50 MHz processing rate support local control and data transfer, while 32 KB of flash can hold compact firmware. Validate USB bus-power limits, decoupling, clock startup, and total system load before production use.
What is the best drop-in replacement for C8051F382-GQ?
No independent cross-brand drop-in replacement is established by the available family documentation. Same-family C8051F38x devices can preserve the 48-pin TQFP footprint, but flash capacity and peripheral availability may differ, so package equivalence alone does not establish a drop-in replacement. Review the Silicon Labs pin table and device-specific specifications, then repeat firmware and USB validation for the selected alternate.
What can replace C8051F382-GQ?
The closest replacement candidates are pin-compatible members of the Silicon Labs C8051F38x family, including C8051F380-GQ, C8051F383-GQ, C8051F384-GQ, C8051F38C-GQ, and C8051F387-GQ. Their memory capacities and peripheral combinations differ, so replacement should be treated as a device-specific engineering review rather than an automatic substitution. Confirm package pins, voltage, clock, USB behavior, interrupts, and firmware compatibility.
What is the best cross-brand equivalent for C8051F382-GQ?
No cross-brand equivalent can be recommended as a verified drop-in replacement for the C8051F382-GQ. A valid cross-brand substitute would need the same 48-pin TQFP land pattern, pin-to-pin compatibility, 2.7 V to 5.25 V operation, 50 MHz-class performance, full-speed USB, adequate memory, and compatible analog functions. Use the Request a Quote form on this page to discuss availability, lifecycle, and sourcing requirements.
Where to buy C8051F382-GQ online and what is its lead time?
Use the Request a Quote form on this page to request current C8051F382-GQ availability, order quantity, and lead time. The component is actively listed in the Silicon Labs C8051F38x documentation and appears in current distribution records, but inventory changes by order configuration. Provide the required package, quantity, date code, and production schedule so the quote can reflect an actionable delivery commitment.

נתוני עזר הנדסיים עבור C8051F382-GQ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose C8051F382-GQ when a 48-pin TQFP design needs full-speed USB, 50 MHz processing, analog measurement, and approximately 32 KB of firmware without external program memory. C8051F380-GQ is appropriate when 16 KB of flash is sufficient and firmware can be reduced. Select C8051F383-GQ, C8051F384-GQ, C8051F38C-GQ, or C8051F387-GQ when their additional flash or confirmed peripheral set supports a more demanding product. Although the alternatives retain the same family package and 50 MHz clock rating, RAM availability, USB implementation, analog resources, interrupts, and device-specific functions must be checked. Package fit alone is not sufficient for production substitution; validate the selected part against the complete electrical, firmware, and USB requirements.

השוואה עם חלופות

פרמטר מוצר זה C8051F380-GQ C8051F383-GQ C8051F384-GQ C8051F38C-GQ C8051F387-GQ
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm)
CPU Architecture 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz
Instruction Rate 48 MIPS 48 MIPS 48 MIPS 48 MIPS 48 MIPS 48 MIPS
Program Flash Memory 32 KB 16 KB 64 KB 64 KB 64 KB 64 KB
USB Interface Full-speed USB Full-speed USB Full-speed USB Full-speed USB Full-speed USB Full-speed USB
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

מבדילים עיקריים

  • Balanced memory capacity for compact USB firmware (לעומתC8051F380-GQ)
  • Lower flash burden than larger same-family devices (לעומתC8051F384-GQ)
  • Full-speed USB and analog conversion in one MCU (לעומתC8051F387-GQ)

הערות תכנון

Route USB D+ and D- as a short, continuous differential pair with matched impedance to the connector or transceiver. Avoid stubs, test pads that lack proper termination, and plane splits beneath the pair. Keep the MCU and USB-related decoupling close to their pins, while separating USB clock and data routing from analog inputs and switching-supply traces.

The 48-pin TQFP has fine-pitch leads on all four sides, so use a land pattern that matches the manufacturer's package drawing and verify solder-paste volume and stencil apertures before production. Preserve the pin-1 orientation, inspect lead coplanarity, and avoid placing tall components that can interfere with inspection or rework. Confirm exposed-pad and thermal requirements from the package drawing if the selected footprint includes a thermal pad.

Do not treat another C8051F38x member as an automatic substitute merely because it uses the same TQFP footprint. Compare flash capacity, RAM, USB behavior, analog channels, clocking, interrupt assignments, and peripheral availability in the device-specific documentation. The family relationship supports hardware reuse in many designs, but firmware and boot-code compatibility must be verified before releasing a substitute to production.

Keep the operating voltage within 2.7 V to 5.25 V and account for startup, USB attach, and analog-reference settling when selecting the supply. Place the required bypass network at the power pins and use a regulator with adequate transient response for the complete USB-powered load. Verify brownout behavior, reset timing, and bus-powered current before the board is connected to a host.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. Confirm compliance for the exact production lot with the manufacturer.

חיפושים קשורים

C8051F382-GQ C8051F382-GQ datasheet C8051F382-GQ datasheet pdf C8051F382-GQ pinout C8051F382-GQ specifications C8051F382-GQ replacement C8051F382-GQ equivalent C8051F382-GQ cross reference C8051F382-GQ footprint C8051F382-GQ price C8051F382-GQ stock Silicon Labs C8051F382-GQ C8051F382-GQ vs C8051F384-GQ C8051F38x USB application circuit

רכיבים ומונחים קשורים

Silicon Labs C8051F382-GQ C8051F38x C8051F380-GQ C8051F383-GQ C8051F384-GQ C8051F38C-GQ C8051F387-GQ 8051-compatible CISC core 8-bit microcontroller flash memory full-speed USB USB data acquisition industrial sensor interface human-interface device analog multiplexer 50 MHz clock 48 MIPS 32 KB flash 2.25K x 8-bit RAM 48-pin TQFP 7 x 7 mm package surface mount analog-to-digital conversion
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר