Harris Corporation

CD4017BK3 - CMOS Decade Counter, 16-CFP | Harris Corporation

MPN: CD4017BK3 ✗ סוף ייצור
3V to 18V Vdss 16-CFP ceramic flat package Package Rising edge Speed
כמות הזמנה מינימלית: 1 |

CD4017BK3 סקירה

The Harris Corporation CD4017BK3 is a CMOS decade counter and divider with one decade counter element, a 10-bit positive/negative output arrangement, and a 16-lead ceramic flat package. It is designed for sequential counting applications where ten decoded outputs advance with the clock. The verified product data identifies the device as a counter IC, decade counter, and divider in the 16-CFP package.

A decade counter is a synchronous sequential logic component that divides an input clock frequency by ten and produces one of ten decoded outputs during each count state. The CD4017BK3 is therefore placed within the hierarchy of logic ICs, counters, and dividers, where it bridges clocked digital control and simple output sequencing. Its ten outputs can represent successive steps in a timing sequence, while the carry output supports extension when more count positions are required.

The CD4017BK3 is identified as a CD4000B-family CMOS device with a supply range of 3V to 18V and an operating temperature range of -55°C to +125°C. The wide supply-voltage range supports both low-voltage CMOS systems and conventional higher-voltage CMOS logic environments. The device is listed as a positive, negative, 10-bit decade counter, making it useful where a clock must be converted into a repeating sequence of ten states.

The principal applications include LED chasers, stepper-motor position sequencing, programmable timers, frequency division, digital sequencing, and general-purpose control logic. In each case, the clock input determines the progression rate, while the decoded outputs identify the current count state. The carry output can extend the effective count range when cascaded with another counter.

The 16-CFP package is intended for surface-mount assembly. PCB layout should preserve short clock and reset paths, provide adequate grounding, and account for the supply and decoupling requirements of the CD4000B logic family. Because the CD4017BK3 is a legacy CMOS counter, the complete electrical limits and timing characteristics should be checked in the manufacturer datasheet before applying it to a new high-speed design.

This page organizes the verified Harris Corporation product information, package identity, operating limits, cross-reference findings, application guidance, and engineering comparison points. The data also distinguishes the exact CD4017BK3 ordering code from related CD4017 and CD4017BK variants so engineers can evaluate replacement requirements without confusing a related family member with a confirmed drop-in substitute.

חלופות תחליף ישיר עבור CD4017BK3 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם CD4017BK3 (אותו גורם צורה וטביעת רגל) — שונים ב Logic Family, Mounting Type, Supply Voltage Range.

Texas Instruments
Logic Family: CMOS 4000 series
Mounting Type: Through-hole ceramic flat package
Supply Voltage Range: 3 V to 18 V
השווה עם CD4017BK3 →

CD4017BK

✅ Drop-In
Texas Instruments
📦 16-CFP ceramic flat package
Decade counter with 10 decoded outputs · CMOS 4000 series · 3 V to 18 V · 5 V · 11 MHz · 5.5 MHz · 650 ns · 10 outputs

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

CD4017BK3 דירוגים מרביים ומאפיינים חשמליים

Product Type CMOS decade counter and divider
Logic Family CD4000B CMOS
Counter Configuration 1 decade counter element
Counting Outputs 10 decoded outputs
Output Polarity Positive and negative
Supply Voltage Range 3V to 18V
טווח טמפרטורת פעולה -55°C to +125°C
Package Type 16-CFP ceramic flat package
Terminal Count 16 terminals
סוג הרכבה Surface mount
Terminal Form Flat
Package Shape Rectangular
Temperature Grade Military
Clock Edge Rising edge
Primary Function Counting and frequency division
Logic Family Description CD4000B multi-mode counting
Power Consumption Low power consumption
Noise Immunity High noise immunity

מדריך תצורת פינים של CD4017BK3 rectangular

תצורת פינים עבור CD4017BK3 (מארזת rectangular). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת rectangular עבור CD4017BK3

אין נתוני פריסת פינים מפורטים עבור CD4017BK3.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

CD4017BK3 מתאים עבור 6 יישוםs: LED Chaser and Light Sequence, Frequency Divider and Timer, Step-Sequence Control, Digital State Sequencer, Test and Measurement Trigger Sequencer, Industrial Relay and Timing Sequence.

💡

LED Chaser and Light Sequence

The CD4017BK3 fits an LED chaser because its ten decoded outputs advance sequentially with each clock cycle. The verified product information identifies LED chasers as a direct application for this decade counter. A clock oscillator can set the visual step rate, while the decoded outputs drive transistor stages or appropriately rated LED channels. Since the counter operates from 3V to 18V and uses a 16-CFP surface-mount package, it supports compact control boards that require several discrete sequence steps. Designers should confirm output-current and voltage limits in the datasheet, add the required LED current limiting, and account for clock edge timing when coordinating the sequence with other digital functions.

⚡

Frequency Divider and Timer

The CD4017BK3 is appropriate for dividing a periodic input clock into ten slower states, making it useful in basic timers and frequency dividers. Its verified identity as a rising-edge decade counter and divider supports operation from a stable clock source, while the carry output marks the end of each count cycle. The listed 3V to 18V supply range allows selection of a system voltage compatible with other CD4000B logic. When cascading counters, engineers should examine reset behavior and propagation delays to ensure rollover timing remains correct. The wide -55°C to +125°C operating range also supports demanding timer modules, provided the surrounding oscillator, output drivers, and power distribution are designed for the same environmental conditions.

🏭

Step-Sequence Control

The CD4017BK3 can implement ten discrete control steps for machinery, test systems, or sequential fixtures. Each decoded output corresponds to one count position, allowing a controller to energize different loads in a repeatable order. The counter is particularly useful when a simple digital clock source and sequential outputs are preferable to a programmable microcontroller. Its 16-terminal ceramic flat package requires a correctly designed surface-mount footprint and careful routing of clock, reset, supply, and output signals. External driver transistors should be used where loads exceed the logic output ratings. The military temperature designation and -55°C to +125°C operating range make the device relevant to rugged industrial sequence controllers when the complete design is qualified for that environment.

🔧

Digital State Sequencer

The ten decoded outputs of the CD4017BK3 make it a natural building block for a digital state sequencer. A clock generator advances the internal count, and each output can enable a particular stage of a multi-step process such as a calibration routine, relay sequence, or timed instrument state. The positive-and-negative 10-bit counter classification and rising-edge counting behavior support deterministic operation when paired with suitable feedback logic. Because it is a CMOS counter rather than a general-purpose microcontroller, the design must account for debouncing, reset release, and any asynchronous inputs with suitable external circuitry. Its operating range of 3V to 18V allows integration with other CD4000B-family logic while preserving the compact benefits of a 16-CFP surface-mount package.

🖥️

Test and Measurement Trigger Sequencer

The CD4017BK3 can organize repeated test steps by using its decoded outputs to select instrument stimuli or measurement channels in a fixed sequence. The decade-counter function provides ten timing positions without requiring a dedicated processor, and the carry output can trigger the next section of a longer test plan. This makes the device useful in laboratory, board-level, and production-test fixtures where deterministic switching is required. The listed military temperature grade supports consideration in temperature-range test equipment, although every supporting component must also meet the required environmental limits. PCB implementation should keep clock and reset traces short, isolate sensitive analog sections from switching nodes, and use suitable driver interfaces when controlling instrument inputs or relays.

🏭

Industrial Relay and Timing Sequence

The CD4017BK3 can sequence relays, valves, or indicators in a repeatable ten-step pattern because each decoded output represents one count state. The verified CD4000B description identifies high noise immunity and low power consumption as useful characteristics for embedded industrial control. The 3V to 18V supply range supports integration into different CMOS voltage domains, while the -55°C to +125°C rating covers demanding ambient conditions. Relay coils and inductive loads should not be driven directly without suitable driver stages, flyback protection, and adequate spacing. Layout should route high-current return paths away from sensitive clock and reset nodes. The 16-CFP package helps reduce board area compared with older through-hole ceramic packages while retaining a robust surface-mount assembly option.

What is the CD4017BK3?
The CD4017BK3 is a Harris Corporation CMOS decade counter and divider with one decade counting element and ten decoded outputs. The device operates from a 3V to 18V supply in a 16-CFP ceramic flat package. According to the Harris product listing, it is categorized as a 10-bit positive and negative counter intended for counting, sequencing, and frequency-division circuits.
What is the operating voltage of CD4017BK3?
The CD4017BK3 operates from 3V to 18V according to the verified CD4000B product information. This range allows the counter to be used in low-voltage CMOS designs as well as conventional higher-voltage CMOS logic systems. Confirm the complete absolute maximum and recommended operating limits in the manufacturer datasheet before finalizing a new design.
What is the temperature range of CD4017BK3?
The CD4017BK3 is rated for an operating temperature range of -55°C to +125°C. The verified listing also identifies the device as military temperature grade. This makes the part suitable for temperature-demanding industrial, aerospace, and defense-related control circuits when the full application requirements, including supply and timing margins, are satisfied.
How does the CD4017BK3 counter work?
The CD4017BK3 advances through ten decoded states for each complete decade count as clock pulses are applied. The ten decoded outputs identify the active count state, while the carry output provides a transition point for extending the sequence. According to the manufacturer product data, it is a rising-edge decade counter and divider.
What package does CD4017BK3 use?
The CD4017BK3 uses a 16-CFP ceramic flat package with 16 flat terminals and a rectangular package shape. It is designed for surface-mount assembly. The verified product descriptions identify the package as 16-CFP, and the manufacturer datasheet should be used to confirm land-pattern dimensions and terminal numbering before PCB layout release.
Where can I download the CD4017BK3 datasheet PDF?
The CD4017BK3 datasheet PDF is accessible through the Harris Corporation datasheet listing at https://octopart.com/datasheet/harris/CD4017BK3. Use that document to confirm electrical characteristics, timing values, maximum ratings, pin functions, and the ceramic flat-package drawing. The Octopart page is a manufacturer-datasheet access point rather than a substitute for the original PDF.
Where can I find the CD4017BK3 pinout?
The CD4017BK3 pinout is found in the pin-description section of the manufacturer datasheet, which is linked from the Harris Corporation datasheet access page. The device uses 16 flat terminals in a 16-CFP package. Review the exact clock, reset, decoded-output, carry, supply, and ground assignments directly in the datasheet before wiring the PCB.
What can replace the CD4017BK3?
The closest related ordering code identified for the CD4017BK3 is CD4017BK, but the verified material does not establish every temperature, package, and lifecycle detail needed to call it a confirmed drop-in replacement. The CD4017 family and CD74HC4017 logic categories are useful starting points, while a replacement should be accepted only after its pinout, supply range, timing, output drive, and package drawing are matched.
Is CD4017BK the same as CD4017BK3?
CD4017BK and CD4017BK3 are related Harris Corporation CD4017 decade-counter order codes, but the suffix can encode ordering, temperature, or packaging distinctions. The verified listing describes CD4017BK as a 16-CFP counter, while CD4017BK3 is explicitly identified as military grade. Confirm the manufacturer ordering table and package drawing before treating them as interchangeable.
CD4017BK3 vs CD74HC4017 - which is better for a 5V design?
The CD4017BK3 is generally better when a legacy CD4000B CMOS implementation, 3V to 18V supply range, and -55°C to +125°C operating range are priorities. The CD74HC4017 belongs to the 74HC family and may offer a different noise, speed, and supply-voltage profile. The correct choice depends on the target logic family and complete timing requirements, not merely the shared decade-counter function.
When should I choose CD4017BK3 over a 74HC4017?
Choose CD4017BK3 when the design specifically benefits from the CD4000B family, supports voltages across the listed 3V to 18V range, or requires the stated -55°C to +125°C operating capability. Select a 74HC4017 instead when the system is primarily 5V TTL-compatible logic and its lower noise or specific timing characteristics better match the design.
Is CD4017BK3 suitable for LED chasers and sequencing?
Yes, CD4017BK3 is suitable for LED chasers and general sequencing because it provides ten decoded outputs that advance in order with clock pulses. The verified product descriptions specifically identify LED chasers, timers, and counters as suitable applications. Drive each output through the required current-limiting and transistor interface rather than exceeding the device's output-current limits.
Where to buy CD4017BK3 online?
Use the Request a Quote form on this page to request CD4017BK3 availability, lead time, and a direct quotation for the exact 16-CFP ordering code. The verified market listing identifies CD4017BK3 as a Harris Corporation product distributed through multiple channels, including an authorized-distributor listing, so the quoted configuration should specifically state CD4017BK3 and the 16-CFP package.
What is the price of CD4017BK3?
Current CD4017BK3 pricing is presented through the Request a Quote form on this page rather than as a static table figure. The structured price record tracks the exact ordering code and its recent market listing, but the quote form is the appropriate route for current unit availability, quantity breaks, and an order-ready quotation.
What is the lead time and stock status for CD4017BK3?
CD4017BK3 lead time and current stock should be confirmed through the Request a Quote form on this page. A verified market listing reports inventory for the exact Harris Corporation part in the 16-CFP package, but availability can change with quantity and sourcing channel. State the required quantity and date when requesting the quotation.

נתוני עזר הנדסיים עבור CD4017BK3 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose CD4017BK3 when the design specifically calls for a Harris Corporation CD4000B decade counter in a 16-CFP ceramic flat package, particularly where the military temperature grade and -55°C to +125°C operating range are important. It provides ten decoded states, rising-edge counting, and a 3V to 18V supply range for LED sequencing, timers, dividers, and industrial state-control circuits. CD4017BK is the closest related ordering code identified, but it should be accepted only after its ordering suffix, temperature grade, lifecycle status, and exact pinout have been confirmed. A 74HC-family decade counter may be preferable in a predominantly 5V TTL-compatible system when lower noise or a different propagation-delay profile is more important than retaining the CD4000B family. Neither a shared function nor a 16-pin count guarantees drop-in compatibility; verify the land pattern, supply ratings, timing, and output-drive requirements before substitution.

השוואה עם חלופות

פרמטר מוצר זה CD4017BK
Package 16-CFP ceramic flat package 16-CFP ceramic flat package
Brand Harris Corporation Harris Corporation
Counter Type Decade counter Decade counter
Counter Elements 1 decade element 1 decade element
Output Configuration 10-bit positive and negative 10-bit positive and negative
Clock Edge Rising edge Rising edge
Terminal Count 16 terminals 16 terminals

מבדילים עיקריים

  • Wide operating-temperature capability (לעומתCD4017BK)
  • Broad CD4000B supply-voltage range (לעומתCD4017BK)
  • Compact surface-mount implementation (לעומתCD4017BK)

הערות תכנון

Keep the clock and reset nets short and route them away from high-current switching or inductive-load traces. Place the logic-family decoupling capacitor close to the supply and ground terminals, and use a solid ground reference on the 16-CFP footprint. Because the decoded outputs can transition rapidly, separate sensitive analog or measurement sections from the counter and its driver circuitry.

Operate the CD4017BK3 only within the documented 3V to 18V supply range and check absolute maximum limits before transients are added. CMOS input pins should not be allowed to float; unused inputs require defined levels. If output loads are capacitive or inductive, use suitable isolation and protection because the counter's logic outputs are generally not intended to drive relay coils or other high-energy loads directly.

Do not treat every CD4017-family ordering code as automatically interchangeable. The related CD4017BK and CD4017BK3 labels require comparison of temperature grade, package construction, ordering code, and lifecycle status. Confirm the terminal numbering and package drawing for the exact 16-CFP device, and validate reset timing if the counter is used to establish repeatable mechanical or test sequences.

Account for clock rise time and propagation delay when the counter drives a second stage or a precision timing chain. A clean edge at the clock pin is more important than the minimum pulse width alone, particularly when long PCB traces or slow clock sources are involved. Keep the oscillator away from switching nodes and use a local ground-return path to reduce susceptibility to coupled noise.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified product data identifies the part as military temperature grade but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

CD4017BK3 datasheet CD4017BK3 pinout CD4017BK3 datasheet pdf CD4017BK3 equivalent CD4017BK3 replacement CD4017BK3 cross reference CD4017BK3 16-CFP CD4017BK3 price CD4017BK3 stock Harris CD4017BK3 CD4017BK3 vs CD74HC4017 CD4017BK3 LED chaser

רכיבים ומונחים קשורים

Harris Corporation CD4017BK3 CD4017BK CD74HC4017 CD4000B CMOS decade counter counter IC divider logic IC sequential logic decoded outputs frequency divider LED chaser rising-edge counting 3V to 18V supply -55°C to +125°C 16-CFP ceramic flat package surface-mount technology military temperature grade high noise immunity low power consumption clock sequencing carry output CD4017 family
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר