CD4017BK3 - CMOS Decade Counter, 16-CFP | Harris Corporation
部品番号: CD4017BK3 ✗ 生産終了CD4017BK3 概要
A decade counter is a synchronous sequential logic component that divides an input clock frequency by ten and produces one of ten decoded outputs during each count state. The CD4017BK3 is therefore placed within the hierarchy of logic ICs, counters, and dividers, where it bridges clocked digital control and simple output sequencing. Its ten outputs can represent successive steps in a timing sequence, while the carry output supports extension when more count positions are required.
The CD4017BK3 is identified as a CD4000B-family CMOS device with a supply range of 3V to 18V and an operating temperature range of -55°C to +125°C. The wide supply-voltage range supports both low-voltage CMOS systems and conventional higher-voltage CMOS logic environments. The device is listed as a positive, negative, 10-bit decade counter, making it useful where a clock must be converted into a repeating sequence of ten states.
The principal applications include LED chasers, stepper-motor position sequencing, programmable timers, frequency division, digital sequencing, and general-purpose control logic. In each case, the clock input determines the progression rate, while the decoded outputs identify the current count state. The carry output can extend the effective count range when cascaded with another counter.
The 16-CFP package is intended for surface-mount assembly. PCB layout should preserve short clock and reset paths, provide adequate grounding, and account for the supply and decoupling requirements of the CD4000B logic family. Because the CD4017BK3 is a legacy CMOS counter, the complete electrical limits and timing characteristics should be checked in the manufacturer datasheet before applying it to a new high-speed design.
This page organizes the verified Harris Corporation product information, package identity, operating limits, cross-reference findings, application guidance, and engineering comparison points. The data also distinguishes the exact CD4017BK3 ordering code from related CD4017 and CD4017BK variants so engineers can evaluate replacement requirements without confusing a related family member with a confirmed drop-in substitute.
ドロップイン代替品: CD4017BK3 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CD4017BK3 (同一形状・フットプリント) — 相違点: Logic Family, Mounting Type, Supply Voltage Range.
CD4017BK
✅ ドロップイン価格はお問い合わせください
データシートを見る →CD4017BK3 最大定格&電気的特性
| Product Type | CMOS decade counter and divider |
| Logic Family | CD4000B CMOS |
| Counter Configuration | 1 decade counter element |
| Counting Outputs | 10 decoded outputs |
| Output Polarity | Positive and negative |
| Supply Voltage Range | 3V to 18V |
| 動作温度範囲 | -55°C to +125°C |
| Package Type | 16-CFP ceramic flat package |
| Terminal Count | 16 terminals |
| 実装タイプ | Surface mount |
| Terminal Form | Flat |
| Package Shape | Rectangular |
| Temperature Grade | Military |
| Clock Edge | Rising edge |
| Primary Function | Counting and frequency division |
| Logic Family Description | CD4000B multi-mode counting |
| Power Consumption | Low power consumption |
| Noise Immunity | High noise immunity |
CD4017BK3 rectangular ピン配置ガイド
CD4017BK3 (rectangular パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CD4017BK3.
詳細は データシート をご参照ください。
主な用途
CD4017BK3 の用途: 6 件s: LED Chaser and Light Sequence, Frequency Divider and Timer, Step-Sequence Control, Digital State Sequencer, Test and Measurement Trigger Sequencer, Industrial Relay and Timing Sequence.
LED Chaser and Light Sequence
The CD4017BK3 fits an LED chaser because its ten decoded outputs advance sequentially with each clock cycle. The verified product information identifies LED chasers as a direct application for this decade counter. A clock oscillator can set the visual step rate, while the decoded outputs drive transistor stages or appropriately rated LED channels. Since the counter operates from 3V to 18V and uses a 16-CFP surface-mount package, it supports compact control boards that require several discrete sequence steps. Designers should confirm output-current and voltage limits in the datasheet, add the required LED current limiting, and account for clock edge timing when coordinating the sequence with other digital functions.
おすすめ
Frequency Divider and Timer
The CD4017BK3 is appropriate for dividing a periodic input clock into ten slower states, making it useful in basic timers and frequency dividers. Its verified identity as a rising-edge decade counter and divider supports operation from a stable clock source, while the carry output marks the end of each count cycle. The listed 3V to 18V supply range allows selection of a system voltage compatible with other CD4000B logic. When cascading counters, engineers should examine reset behavior and propagation delays to ensure rollover timing remains correct. The wide -55°C to +125°C operating range also supports demanding timer modules, provided the surrounding oscillator, output drivers, and power distribution are designed for the same environmental conditions.
おすすめ
Step-Sequence Control
The CD4017BK3 can implement ten discrete control steps for machinery, test systems, or sequential fixtures. Each decoded output corresponds to one count position, allowing a controller to energize different loads in a repeatable order. The counter is particularly useful when a simple digital clock source and sequential outputs are preferable to a programmable microcontroller. Its 16-terminal ceramic flat package requires a correctly designed surface-mount footprint and careful routing of clock, reset, supply, and output signals. External driver transistors should be used where loads exceed the logic output ratings. The military temperature designation and -55°C to +125°C operating range make the device relevant to rugged industrial sequence controllers when the complete design is qualified for that environment.
おすすめ
Digital State Sequencer
The ten decoded outputs of the CD4017BK3 make it a natural building block for a digital state sequencer. A clock generator advances the internal count, and each output can enable a particular stage of a multi-step process such as a calibration routine, relay sequence, or timed instrument state. The positive-and-negative 10-bit counter classification and rising-edge counting behavior support deterministic operation when paired with suitable feedback logic. Because it is a CMOS counter rather than a general-purpose microcontroller, the design must account for debouncing, reset release, and any asynchronous inputs with suitable external circuitry. Its operating range of 3V to 18V allows integration with other CD4000B-family logic while preserving the compact benefits of a 16-CFP surface-mount package.
おすすめ
Test and Measurement Trigger Sequencer
The CD4017BK3 can organize repeated test steps by using its decoded outputs to select instrument stimuli or measurement channels in a fixed sequence. The decade-counter function provides ten timing positions without requiring a dedicated processor, and the carry output can trigger the next section of a longer test plan. This makes the device useful in laboratory, board-level, and production-test fixtures where deterministic switching is required. The listed military temperature grade supports consideration in temperature-range test equipment, although every supporting component must also meet the required environmental limits. PCB implementation should keep clock and reset traces short, isolate sensitive analog sections from switching nodes, and use suitable driver interfaces when controlling instrument inputs or relays.
おすすめ
Industrial Relay and Timing Sequence
The CD4017BK3 can sequence relays, valves, or indicators in a repeatable ten-step pattern because each decoded output represents one count state. The verified CD4000B description identifies high noise immunity and low power consumption as useful characteristics for embedded industrial control. The 3V to 18V supply range supports integration into different CMOS voltage domains, while the -55°C to +125°C rating covers demanding ambient conditions. Relay coils and inductive loads should not be driven directly without suitable driver stages, flyback protection, and adequate spacing. Layout should route high-current return paths away from sensitive clock and reset nodes. The 16-CFP package helps reduce board area compared with older through-hole ceramic packages while retaining a robust surface-mount assembly option.
おすすめ
エンジニアリング参考データ: CD4017BK3 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CD4017BK |
|---|---|---|
| Package | 16-CFP ceramic flat package | 16-CFP ceramic flat package |
| Brand | Harris Corporation | Harris Corporation |
| Counter Type | Decade counter | Decade counter |
| Counter Elements | 1 decade element | 1 decade element |
| Output Configuration | 10-bit positive and negative | 10-bit positive and negative |
| Clock Edge | Rising edge | Rising edge |
| Terminal Count | 16 terminals | 16 terminals |
主な差別化要因
- Wide operating-temperature capability (vs CD4017BK)
- Broad CD4000B supply-voltage range (vs CD4017BK)
- Compact surface-mount implementation (vs CD4017BK)
設計ノート
Keep the clock and reset nets short and route them away from high-current switching or inductive-load traces. Place the logic-family decoupling capacitor close to the supply and ground terminals, and use a solid ground reference on the 16-CFP footprint. Because the decoded outputs can transition rapidly, separate sensitive analog or measurement sections from the counter and its driver circuitry.
Operate the CD4017BK3 only within the documented 3V to 18V supply range and check absolute maximum limits before transients are added. CMOS input pins should not be allowed to float; unused inputs require defined levels. If output loads are capacitive or inductive, use suitable isolation and protection because the counter's logic outputs are generally not intended to drive relay coils or other high-energy loads directly.
Do not treat every CD4017-family ordering code as automatically interchangeable. The related CD4017BK and CD4017BK3 labels require comparison of temperature grade, package construction, ordering code, and lifecycle status. Confirm the terminal numbering and package drawing for the exact 16-CFP device, and validate reset timing if the counter is used to establish repeatable mechanical or test sequences.
Account for clock rise time and propagation delay when the counter drives a second stage or a precision timing chain. A clean edge at the clock pin is more important than the minimum pulse width alone, particularly when long PCB traces or slow clock sources are involved. Keep the oscillator away from switching nodes and use a local ground-return path to reduce susceptibility to coupled noise.
コンプライアンス情報
The verified product data identifies the part as military temperature grade but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.