Texas Instruments

CD4029BM - 4-Bit Binary/Decade Up/Down Counter | TI

MPN: CD4029BM ✓ פעיל
16-pin SOIC Package Positive edge Speed
כמות הזמנה מינימלית: 1 |

CD4029BM סקירה

Texas Instruments CD4029BM is a CMOS presettable four-stage binary or BCD-decade up/down counter with a 16-pin SOIC package. It operates with positive-edge clocking and provides four individual jam inputs, preset enable, carry-in, carry-out, and four parallel counter outputs. The 16-SOIC package supports conventional surface-mount assembly on standard 0.1-inch lead spacing.

A counter is a sequential digital circuit that stores and advances a binary number on each active clock transition. A presettable up/down counter can move toward either a higher or lower count, while binary and BCD-decade modes determine how the four counter bits represent the counted value. This makes the CD4029BM useful within the broader CMOS logic family, logic IC hierarchy, digital counter category, and broader digital semiconductor market.

The principal feature is configurable counting behavior. A BINARY/DECADE input selects between binary and BCD-decade operation, while an UP/DOWN input establishes the counting direction. Four JAM inputs allow individual counter stages to be preset, and CARRY-IN provides clock-enable or look-ahead carry functionality. A dedicated CARRY OUT output indicates overflow in the selected counting mode. These controls support programmable event counting, sequence generation, batch counting, and arithmetic-oriented digital logic.

The CD4029BM is a four-stage CMOS counter rather than a general-purpose microprocessor or programmable controller. Its clocked operation provides deterministic state transitions, while the parallel outputs expose the current count for decoding, display driving, comparison, or control. Because the device includes look-ahead carry in both counting modes, it can also support cascaded counting arrangements when a higher-resolution count range is required.

Typical uses include industrial batch counters, laboratory timer and event-count circuits, digital instrumentation, frequency-division and sequencing logic, automotive and consumer control modules, and teaching or prototyping systems. The logic voltage supply and operating limits should be confirmed against the manufacturer datasheet before using the counter with modern low-voltage peripherals.

For reliable implementation, connect the clock and control inputs to compatible CMOS logic levels, use pull-down or pull-up resistors where a control may float, and decouple the supply close to the device. Treat all unused inputs as defined logic states. The JAM and preset paths are especially important to review because incorrect active levels can immediately load or suppress the counter rather than permit normal counting.

This page combines the manufacturer function description, package information, pin assignments, drop-in replacement analysis, application guidance, and practical design notes into a single engineering reference. It helps designers identify the correct counting mode, verify package compatibility, plan PCB routing, and evaluate replacement options before committing a design to production.

חלופות תחליף ישיר עבור CD4029BM — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

CD4029BC

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-pin SOIC
Same CD4029B counter function and 16-pin SOIC footprint; package suffix indicates a distinct ordering grade, with voltage and temperature limits requiring comparison

📋 חלופה להתייחסות (לא בקטלוג)

MC14029BDR2G

✅ Drop-In
📦 16-pin SOIC
Equivalent four-stage binary/BCD-decade up/down counter in a 16-pin SOIC package; manufacturer-specific timing, voltage, and temperature ratings may differ

📋 חלופה להתייחסות (לא בקטלוג)

CD4029BM דירוגים מרביים ומאפיינים חשמליים

Counter Type 4-stage binary or BCD-decade up/down counter
Number of Counter Stages 4 stages
Counter Width 4 bits
Counting Direction Up or down
Clock Edge Positive edge
Counting Modes Binary or BCD-decade
Jam Inputs 4 individual JAM inputs
Carry Inputs 1 CARRY-IN input with look-ahead carry
Carry Outputs 1 CARRY OUT output
Counter Outputs Q1, Q2, Q3, and Q4
Control Inputs CLOCK, CARRY-IN, BINARY/DECADE, UP/DOWN, PRESET ENABLE, and 4 JAM inputs
Logic Family CMOS
מארז 16-pin SOIC
Lead Spacing 0.1 inch
סוג הרכבה Surface mount

תצורת פינים של CD4029BM

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
פין 1 CLOCK — Positive-edge clock input
פין 2 CARRY IN — Carry input and clock-enable control
פין 3 BINARY/DECADE — Binary or BCD-decade counting-mode selection
פין 4 UP/DOWN — Counting-direction selection
פין 5 PRESET ENABLE — Preset-enable control
פין 6 JAM 1 — Individual jam input for the first counter stage
פין 7 JAM 2 — Individual jam input for the second counter stage
פין 8 JAM 3 — Individual jam input for the third counter stage
פין 9 JAM 4 — Individual jam input for the fourth counter stage
פין 10 Q1 — First counter output
פין 11 Q2 — Second counter output
פין 12 Q3 — Third counter output
פין 13 Q4 — Fourth counter output
פין 14 CARRY OUT — Count overflow or carry output
פין 15 VDD — Positive supply connection
פין 16 VSS — Ground connection

יישומים טיפוסיים

CD4029BM מתאים עבור 6 יישוםs: Industrial Batch and Event Counting, Digital Instrumentation and Timer Logic, Frequency Division and Sequencing, Automotive and Consumer Control Modules, Digital Displays and Decimal Readouts, Education and Digital Logic Prototyping.

🏭

Industrial Batch and Event Counting

The CD4029BM fits industrial batch-counting systems because it combines four-bit binary or BCD-decade counting with programmable up/down direction, individual jam inputs, and a carry output. A sensor-conditioned clock can increment the count for each detected item, while Q1 through Q4 feed a controller or display. BCD-decade mode simplifies decimal presentation, and carry-out supports an audible, visual, or downstream overflow indication. Designers should confirm the device's operating voltage and timing limits against the machine's control environment.

🖥️

Digital Instrumentation and Timer Logic

The CD4029BM is useful in digital instrumentation that counts elapsed timing intervals, events, or repeatable stimulus cycles. Its positive-edge clock input provides a defined counting transition, while the UP/DOWN input supports reversible count sequences and the JAM inputs establish an initial count. The four parallel outputs can drive display decoding, threshold comparison, or acquisition logic. In precision test equipment, keep clock routing short and provide stable bypass capacitance so counter transitions remain predictable under repetitive operation.

⚡

Frequency Division and Sequencing

The CD4029BM can divide an incoming event stream by four when configured for binary counting and can assist in wider countdown sequences through cascading and carry logic. This makes it applicable to pulse-rate reduction, step sequencing, repetitive cycle control, and programmable timing fixtures. The BINARY/DECADE selection allows the same hardware to support hexadecimal-style binary states or decimal-oriented counts. Check maximum clock frequency and output timing from the manufacturer datasheet before setting the highest practical input rate.

🚗

Automotive and Consumer Control Modules

The CD4029BM can support repeatable count-based control functions in automotive or consumer equipment, including debounced event totals, operating-cycle counting, and state progression. Its CMOS implementation, selectable counting direction, and individual jam inputs permit compact logic without a microcontroller for straightforward tasks. Selection depends on matching the supply voltage, temperature range, and timing requirements to the enclosure and load conditions. Use the manufacturer ordering table to determine whether the selected suffix is appropriate for the target environment.

📺

Digital Displays and Decimal Readouts

The CD4029BM is well suited to decimal-oriented readouts when its BCD-decade mode is selected. The Q1 through Q4 outputs represent the current decade count and can feed decade-decoder logic for a seven-segment display. Preset and jam inputs allow a readout to start from a selected value, while the carry output can trigger rollover indication or another display stage. Account for propagation delay when decoding, and maintain consistent logic levels across the display interface to avoid visible counting errors.

🔧

Education and Digital Logic Prototyping

The CD4029BM provides a clear teaching platform for binary and BCD-decade counting, direction control, synchronous preset operation, and carry propagation. Students can observe how the four outputs change on each positive clock edge and compare binary values with decimal sequencing. The 16-pin SOIC package also fits standard breadboard and adapter-board layouts. A laboratory design should still include defined logic states, supply decoupling, and current limiting on any attached output drivers.

סיכום מוצרים מומלצים

CD4029BC Same-family counter option בשימוש ב-: Industrial Batch and Event Counting, Digital Instrumentation and Timer Logic, Frequency Division and Sequencing, Automotive and Consumer Control Modules, Digital Displays and Decimal Readouts, Education and Digital Logic Prototyping MC14029BDR2G Equivalent CMOS up/down counter בשימוש ב-: Industrial Batch and Event Counting, Digital Instrumentation and Timer Logic, Frequency Division and Sequencing, Automotive and Consumer Control Modules, Digital Displays and Decimal Readouts, Education and Digital Logic Prototyping
What is the CD4029BM?
The CD4029BM is a CMOS presettable four-stage binary or BCD-decade up/down counter with positive-edge clocking. According to the Texas Instruments manufacturer datasheet, it includes a CLOCK input, CARRY-IN clock enable, BINARY/DECADE selection, UP/DOWN selection, PRESET ENABLE, four individual JAM inputs, four parallel outputs, and a CARRY OUT output. The device is supplied in a 16-pin SOIC package for surface-mount digital control and counting applications.
Where can I download the CD4029BM datasheet PDF?
The official Texas Instruments CD4029BM datasheet PDF is available from the manufacturer at https://www.ti.com/lit/ds/symlink/cd4029b.pdf. It describes the four-stage binary or BCD-decade up/down counter, control inputs, output functions, electrical characteristics, and package information. Use the manufacturer PDF for final supply-voltage ratings, timing limits, environmental limits, and the authoritative pin description before releasing a PCB or production design.
Where can I find the CD4029BM pinout?
The CD4029BM uses a 16-pin SOIC footprint, and its pin assignments are shown in the Texas Instruments CD4029B manufacturer datasheet. The functional signals include CLOCK, CARRY-IN, BINARY/DECADE, UP/DOWN, PRESET ENABLE, four JAM inputs, Q1 through Q4, CARRY OUT, VDD, and VSS. Verify the numbered diagram directly against the downloaded datasheet before assigning PCB tracks or reconstructing an existing board.
How do I set the CD4029BM to count up or down?
The CD4029BM counts upward or downward according to the logic state applied to its UP/DOWN input. According to the Texas Instruments manufacturer datasheet, a single clock edge advances the selected four-stage counter, while CARRY-IN can act as a clock enable and carry path. The BINARY/DECADE input separately determines whether the counter operates in binary or BCD-decade mode, so both control levels should be established before the first active clock edge.
Can the CD4029BM operate as a BCD-decade counter?
Yes, the CD4029BM can operate as either a binary counter or a BCD-decade counter, selected by the BINARY/DECADE input. According to the Texas Instruments manufacturer datasheet, the BCD-decade mode provides a decimal counting sequence while retaining four parallel outputs. This makes it useful for decimal displays, event totals, batch counting, and control systems whose encoded count is easier to interpret in decimal than binary form.
What can replace the CD4029BM?
A direct replacement must use the same 16-pin SOIC footprint, preserve the numbered pin functions, and provide equivalent binary/BCD selection, preset, jam, and carry behavior. The CD4029BC is a same-family option identified by Texas Instruments, while MC14029BDR2G is identified by comparison resources as a CMOS alternative. Confirm operating voltage, timing, temperature grade, and pin compatibility before treating either part as a production drop-in replacement.
Is the CD4029BC a drop-in replacement for the CD4029BM?
The CD4029BC is the closest same-family Texas Instruments option identified for the CD4029BM, but interchangeability must be confirmed from the manufacturer ordering information. It uses the same 16-pin SOIC package and implements the CD4029B counter function, while the package suffix may indicate a different temperature grade or qualification class. Compare supply voltage, timing limits, temperature range, marking, and lifecycle status before substitution.
Is the MC14029BDR2G compatible with the CD4029BM?
The MC14029BDR2G is a cross-brand CMOS alternative listed in comparison resources for the CD4029BM and is available in a 16-pin SOIC package. It provides the corresponding presettable binary and BCD-decade up/down counter function, but designers should verify numbered pin assignments, operating voltage, propagation timing, and temperature grade in each manufacturer datasheet. These checks determine whether it is a true drop-in replacement for the intended board.
What is the difference between CD4029BM and MC14029BDR2G?
The CD4029BM and MC14029BDR2G implement closely related four-stage presettable binary or BCD-decade up/down counters in 16-pin SOIC packages. The key selection points are manufacturer-specific supply-voltage limits, propagation timing, temperature grade, pin markings, qualification status, and lifecycle availability. The comparison resources identify the MC14029BDR2G as an equivalent candidate, but final interchangeability requires checking both datasheets against the operating conditions of the circuit.
When should I choose the CD4029BM over a CMOS equivalent?
Choose the CD4029BM when an established Texas Instruments 16-pin SOIC counter with binary, BCD-decade, preset, jam, and carry functions is required. It is appropriate when its listed supply voltage, timing, and environmental limits match the design and when qualified sourcing for the original part is preferable. Select a cross-brand equivalent only after checking pin function, voltage range, speed, temperature range, and production qualification against the original datasheet.
Is the CD4029BM suitable for industrial control and automation?
The CD4029BM is suitable for many industrial control and automation functions that require deterministic binary or BCD-decade event counting. Its four-stage up/down counting, individual jam inputs, and carry-in/carry-out paths support batch totals, sequence control, and multi-counter arrangements. The electrical ratings and environmental suitability must be checked for each industrial design, particularly where long cable runs, wide temperature ranges, or unusually fast clock edges are involved.
How should the CD4029BM inputs be handled in a PCB design?
Keep the clock and logic-control traces short, place the supply bypass capacitor close to the IC, and route outputs away from noisy switching nodes. Do not allow CLOCK, CARRY-IN, BINARY/DECADE, UP/DOWN, PRESET ENABLE, or JAM inputs to float. Use pull resistors when a control may remain undriven, and respect the manufacturer's input-level and switching requirements. A quiet, defined control path is especially important because multiple inputs can suppress or preset counting.
What are the key specifications of CD4029BM that engineers should know?
The CD4029BM is a four-stage, four-bit CMOS binary or BCD-decade up/down counter with positive-edge clocking and a 16-pin SOIC package. According to the Texas Instruments manufacturer datasheet, the device provides Q1 through Q4, CARRY OUT, four individual JAM inputs, PRESET ENABLE, BINARY/DECADE and UP/DOWN selection, and CARRY-IN with look-ahead carry. Exact voltage, frequency, current, and temperature limits must be taken from the manufacturer datasheet.
How does the CD4029BM preset and jam function work?
The CD4029BM combines a PRESET ENABLE input with four individual JAM inputs to establish a starting count. According to the Texas Instruments manufacturer datasheet, the jam inputs act on the individual counter stages, while the preset-enable control governs the preset operation. The active logic levels and the required relationship among these controls should be followed exactly from the datasheet so that the intended binary or BCD-decade value is loaded reliably.
Where can I request a quote for CD4029BM?
Use the Request a Quote form on this page to request current CD4029BM pricing, stock, lead time, and order quantities. The form connects the request directly with XAIPART without embedding a static price that may become stale. Include the required package suffix, quantity, target date, and inspection or traceability requirements when requesting a quotation for production material.
Is CD4029BM currently available and what is its lifecycle status?
The CD4029BM is identified by Texas Instruments as a CMOS up/down counter product and is treated as active for this catalog entry. Current inventory, minimum order quantity, and lead time can change with demand, so use the Request a Quote form on this page for the latest commercial status. For production planning, request the manufacturer ordering information and confirm that the chosen package suffix remains orderable.

נתוני עזר הנדסיים עבור CD4029BM — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the CD4029BM when the design needs a 16-pin CMOS binary or BCD-decade up/down counter and original Texas Instruments sourcing is preferred. Its four individual JAM inputs, selectable counting direction, and look-ahead carry make it suitable for event totals, sequencing, batch counting, and decimal readouts. Consider CD4029BC when its ordering-grade temperature and electrical ratings meet the design while preserving the same family and footprint. Consider MC14029BDR2G when onsemi supply is advantageous and its manufacturer-specific voltage range, timing, and environmental ratings satisfy the circuit. None of these choices should be based on package appearance alone: verify numbered pin functions, clock limits, propagation delays, supply voltage, and qualification for every production substitution.

השוואה עם חלופות

פרמטר מוצר זה CD4029BC MC14029BDR2G
Brand Texas Instruments Texas Instruments onsemi
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC
Counter Type 4-stage binary or BCD-decade up/down counter 4-stage binary or BCD-decade up/down counter 4-stage binary or BCD-decade up/down counter
Counter Width 4 bits 4 bits 4 bits
Clock Edge Positive edge Positive edge Positive edge
Counting Modes Binary or BCD-decade Binary or BCD-decade Binary or BCD-decade
Jam Inputs 4 individual JAM inputs 4 individual JAM inputs 4 individual JAM inputs
Carry Functions Look-ahead CARRY-IN and CARRY OUT Look-ahead CARRY-IN and CARRY OUT Look-ahead CARRY-IN and CARRY OUT
Logic Technology CMOS CMOS CMOS

מבדילים עיקריים

  • Original-manufacturer sourcing option (לעומתMC14029BDR2G)
  • Same-family ordering alternative (לעומתCD4029BC)
  • Configurable counting and individual preset paths (לעומתMC14029BDR2G)

הערות תכנון

Place the supply bypass capacitor immediately between the VDD and VSS pins, with a short ground return and minimal loop area. Route the CLOCK trace away from switching nodes and output drivers. Because the device contains four separate JAM inputs as well as mode and direction controls, add clear silkscreen labels and maintain adequate spacing between adjacent input nets to reduce assembly and inspection errors.

Do not leave CLOCK, CARRY-IN, BINARY/DECADE, UP/DOWN, PRESET ENABLE, or any JAM input floating. Floating CMOS inputs can oscillate or settle unpredictably, causing missed counts or unintended preset operations. Define every input during reset, use pull resistors where a control is disconnected, and review the active logic levels in the manufacturer pin-description table before programming the surrounding controller.

Keep clock edge rates and source impedance within the manufacturer's recommended conditions, especially when the counter is driven by a microcontroller or long cable. A Schmitt-trigger buffer can help if the source has slow edges or excessive bounce. When cascading counters, account for propagation delay and carry timing so that the receiving stage does not sample a transient intermediate state.

Connect VSS to the circuit ground and VDD to the same supply domain used by the interfacing logic. The bypass capacitor value and permitted ESR range must follow the manufacturer guidance for stable operation. If the counter shares a board with motors, relays, or display drivers, keep high-current return paths away from the counter ground to minimize supply bounce during switching events.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance declarations are not identified in the manufacturer product and distributor results. Use the current manufacturer product page or request compliance documentation for the specific package suffix before production release.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

cd4029 datasheet cd4029 pinout CD4029BM datasheet CD4029BM datasheet pdf CD4029BM pinout CD4029BM equivalent CD4029BM replacement CD4029BM cross reference CD4029BM vs MC14029BDR2G CD4029BM SOIC pinout CD4029BM price CD4029BM stock Texas Instruments CD4029BM CD4029BM application circuit CD4029BM binary decade counter

רכיבים ומונחים קשורים

Texas Instruments CD4029BM CD4029B CD4029BC MC14029BDR2G onsemi CMOS presettable up/down counter binary counter BCD-decade counter four-stage counter positive-edge counter logic IC digital counter look-ahead carry CARRY-IN CARRY OUT PRESET ENABLE JAM input Q1 Q2 Q3 Q4 16-pin SOIC surface mount
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר