Analog Devices

DG409AK - Dual 4:1 CMOS Analog Multiplexer | Analog Devices

MPN: DG409AK ✗ סוף ייצור
5 V to 30 V Vdss 100 ohms maximum Rds(on) 16-pin CERDIP Package
כמות הזמנה מינימלית: 1 |

DG409AK סקירה

Analog Devices DG409AK is a dual 4:1 CMOS analog multiplexer with two independently controlled circuits, a maximum on-state resistance of 100 ohms, channel matching of 1.5 ohms, and switching times of 150 ns maximum. The device is packaged in a 16-pin CERDIP package for through-hole industrial, instrumentation, test, measurement, data-acquisition, and signal-routing systems.

An analog multiplexer is an interface IC that connects one of several analog inputs to a shared output while minimizing signal-path distortion. In the broader semiconductor hierarchy, the DG409AK belongs to the analog switch and multiplexer class, the interface IC family, and ultimately the broader semiconductor category. Its two 4:1 sections allow two signals to be routed independently, reducing the number of external switches required in measurement and control equipment.

The DG409AK supports single-supply operation from 5 V to 30 V and dual-supply operation from ±5 V to ±20 V. Low on-state resistance limits insertion loss, while the specified 1.5-ohm channel-to-channel matching helps preserve amplitude consistency between selected channels. Maximum turn-on and turn-off times of 150 ns support rapid control sequencing, although propagation delay, charge injection, and off-state isolation must also be considered in precision applications.

Internally, the device uses CMOS analog-switching structures controlled by TTL- or CMOS-compatible digital inputs. Independent select and enable controls allow each multiplexer section to route signals when required. The Analog Devices DG409 family documentation emphasizes guaranteed channel matching, on-resistance flatness over the specified signal range, low charge injection, low input leakage, low power consumption, rail-to-rail signal handling, and ESD protection greater than 2000 V.

Typical applications include multimeter and bench-instrument signal selection, automated test equipment, industrial data acquisition, sensor-interface routing, and control systems that must select several analog inputs without adding a separate analog switch for every channel. The 16-pin CERDIP package also suits legacy equipment where through-hole construction and a stable industrial footprint are important.

Designers should verify supply voltage, input-signal range, logic thresholds, leakage, charge injection, and switch timing against the exact operating conditions. A low-impedance source, adequate input protection, and clean grounding help preserve measurement accuracy. Because the DG409AK is listed as obsolete, new production designs should evaluate current DG409-family options and confirm availability, lifecycle, and pin compatibility before committing a layout.

This page combines the DG409AK functional description, verified electrical characteristics, practical application guidance, package considerations, and a conservative drop-in comparison. It is intended to help engineers distinguish true legacy replacements from parts that only share the DG409 name or general multiplexing function.

חלופות תחליף ישיר עבור DG409AK — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

DG409AK/883B

✅ Drop-In
📦 16-pin CDIP
Same dual 4:1 DG409 function and 16-pin through-hole package; 883 processing may change qualification and sourcing conditions, with principal electrical ratings unchanged within 0%

📋 חלופה להתייחסות (לא בקטלוג)

DG409AK/883

✅ Drop-In
📦 16-pin CDIP
Same DG409AK dual 4:1 architecture and 16-pin CDIP package; legacy 883 designation adds processing differences, with no identified change to the core 100-ohm resistance or 150-ns switching limits

📋 חלופה להתייחסות (לא בקטלוג)

DG409AK מפרטים

Multiplexer Configuration Dual 4:1
Number of Circuits 2 circuits
On-State Resistance 100 ohms maximum
Channel-to-Channel Matching 1.5 ohms maximum
Turn-On Time 150 ns maximum
Turn-Off Time 150 ns maximum
Single-Supply Voltage Range 5 V to 30 V
Dual-Supply Voltage Range -20 V to +20 V
מספר פינים 16 pins
מארז 16-pin CERDIP
סוג הרכבה Through-hole
Technology CMOS
Logic Compatibility TTL/CMOS-compatible
ESD Protection Greater than 2000 V
Input Leakage 100 nA maximum
Charge Injection 15 pC maximum
Power Consumption 1.25 mW maximum

מדריך תצורת פינים של DG409AK 16-pin cerdip

תצורת פינים עבור DG409AK (מארזת 16-pin cerdip). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin cerdip עבור DG409AK

אין נתוני פריסת פינים מפורטים עבור DG409AK.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

DG409AK מתאים עבור 6 יישוםs: Automated Test Equipment, Precision Data Acquisition, Bench Instrument Signal Routing, Industrial Sensor Interface, Control-System Signal Multiplexing, Legacy Equipment Maintenance.

🖥️

Automated Test Equipment

The DG409AK fits automated test equipment that must connect several analog sources or returns to shared measurement channels. Two independent 4:1 sections allow two routing paths to be controlled separately, reducing the number of discrete relays required around the test fixture. The 150 ns maximum turn-on and turn-off times support rapid sequencing, while the 1.5-ohm channel-to-channel matching helps limit measurement-gain differences between test points. Designers should account for the 100-ohm maximum on resistance, source impedance, leakage, and connector losses when setting error budgets for low-amplitude or high-impedance measurements.

📡

Precision Data Acquisition

The DG409AK is useful in multichannel data-acquisition systems where transducers or conditioned sensor outputs must share an analog-to-converter input. Its dual 4:1 architecture provides two selectable input banks, while 1.5-ohm channel matching reduces systematic amplitude variation between routes. The maximum 150-ns switching time allows the multiplexer to change channels quickly after a settling interval. For bridge sensors, low-current measurements, or high-impedance sources, evaluate input leakage, charge injection, source impedance, and the 100-ohm on resistance before deciding whether the measurement resolution is sufficient.

🧪

Bench Instrument Signal Routing

The DG409AK supports signal routing in bench instruments that must select among external inputs, internal references, or calibration networks. Two separately enabled 4:1 sections can manage a measurement input and a control or reference path within the same instrument architecture. The 100-ohm maximum on resistance is manageable for many medium-impedance circuits, while the specified matching and switching speed improve repeatability during source selection. Front-end design should include input attenuation or buffering when driving low impedances, and it should protect external inputs against excessive voltage and ESD events.

🏭

Industrial Sensor Interface

The DG409AK can select multiple conditioned industrial sensor outputs before conversion or further processing. The two 4:1 sections allow related sensor groups to share downstream circuitry, reducing connector count and simplifying control. Matching of 1.5 ohms between channels supports consistent routing when source impedances are controlled, and the 150-ns maximum switching times suit systems that alternate channels on a deterministic schedule. Long cable-connected sensors should be isolated from ground loops, and the system must remain within the device's absolute-maximum ratings even during disconnected or abnormal sensor conditions.

🔧

Control-System Signal Multiplexing

The DG409AK can route command, feedback, or setpoint signals in an analog control subsystem where several sources must reach a common actuator or controller interface. Independent enable inputs permit unused routing sections to remain inactive, and TTL- or CMOS-compatible control logic simplifies integration with older digital controllers. The specified 150-ns maximum switching times are much shorter than typical control-loop intervals, but mechanical stability, glitch behavior, and charge injection still determine whether a transition is acceptable. For safety-critical systems, add diagnostics and use qualified components specified by the applicable system requirements.

🛠️

Legacy Equipment Maintenance

The DG409AK is well suited to repairing or extending legacy electronic instruments that use a 16-pin through-hole multiplexer and cannot accept a surface-mount redesign. Its established DG409 function, 100-ohm maximum on resistance, and dual 4:1 organization make it practical for maintaining existing routing architecture. Because the device is obsolete, engineers should preserve the original land pattern, verify every supply and logic connection, and confirm the required temperature and screening conditions. The obsolete status makes careful sourcing, date-code review, and documented inspection especially important for long-lived industrial equipment.

What is the DG409AK analog multiplexer?
The DG409AK is a dual 4:1 CMOS analog multiplexer with two independently controlled switching circuits, 16 pins, and a maximum on-state resistance of 100 ohms. According to the Analog Devices DG409 manufacturer product page, the device supports TTL- and CMOS-compatible controls, rail-to-rail signal handling, and low-power operation. One common output on each section can be connected to any of four corresponding inputs, making the device useful for signal selection, test systems, instrumentation, and data-acquisition equipment.
What are the key specifications of DG409AK that engineers should know?
The DG409AK combines two 4:1 switching sections, 100-ohm maximum on-state resistance, 1.5-ohm channel matching, and 150-ns maximum turn-on and turn-off times. According to the Analog Devices DG409 family datasheet, it also provides 15-pC maximum charge injection, 100-nA maximum input leakage, 1.25-mW maximum power consumption, and ESD protection above 2000 V. The DG409AK operates from 5 V to 30 V in a single-supply arrangement or from ±5 V to ±20 V in a dual-supply arrangement.
Where can I download the DG409AK datasheet PDF?
The official DG409AK documentation is available through the Analog Devices DG409 product page at https://www.analog.com/en/products/dg409.html. The page links the manufacturer data sheet, product selection information, and documentation resources for the DG408 and DG409 families. For a DG409AK-specific legacy or military-ordering decision, also compare the DG409AK/883B listing because that designation identifies a different ordering code within the DG409 family and may carry different processing or qualification requirements.
Where can I find the DG409AK pinout and package information?
The DG409AK uses a 16-pin CERDIP package, and its pin assignments are defined in the pin-configuration section of the Analog Devices DG409 manufacturer documentation. The package contains two separate 4:1 analog multiplexers, each with four inputs, one output, select controls, and an enable input. Use the manufacturer pin table when assigning PCB tracks because the control logic and supply connections must match the exact DG409AK ordering code rather than a similarly named DG409 variant.
What is the maximum on-state resistance of DG409AK?
The maximum on-state resistance of the DG409AK is 100 ohms. According to the Analog Devices DG409 family documentation, this value identifies the switch resistance when a channel is conducting and affects insertion loss, source impedance, and signal attenuation. A practical design should account for the complete divider formed by the 100-ohm switch resistance and the selected source or load impedance. Confirm the resistance across the intended signal range, since connector resistance, leakage, and source impedance can materially affect precision measurements.
What supply voltage range does DG409AK support?
The DG409AK supports a 5 V to 30 V single-supply range or a ±5 V to ±20 V dual-supply range. According to the DG409 family product documentation, these operating limits cover single-rail and bipolar signal-routing arrangements. The selected supply arrangement must remain compatible with the input-signal range, control thresholds, and application ground reference. Designers should not infer that the full signal range is permitted at every supply voltage without checking the electrical-characteristics tables and absolute-maximum limits.
Is DG409AK suitable for automated test equipment?
The DG409AK is suitable for automated test equipment when fast channel selection and consistent on-state resistance are more important than a modern surface-mount footprint. Its two independent 4:1 sections can route two measurement paths, while 150-ns maximum turn-on and turn-off times support rapid sequencing. The 100-ohm maximum on resistance and 1.5-ohm channel matching help limit insertion-loss and gain differences between channels. Low charge injection and leakage are also beneficial when switching precision sources.
What is the best drop-in replacement for DG409AK?
The DG409AK/883B is the closest documented drop-in candidate because it retains the DG409AK function in a 16-pin CDIP package and appears in manufacturer-family comparison records. The exact ordering code still requires procurement review because 883 processing and qualification can differ from the standard DG409AK. The DG409AK/883 is another legacy ordering option listed in a 16-pin CDIP format, but engineers should verify its exact electrical limits, screening, and lifecycle before treating it as a production substitute.
Can DG409AK/883B replace DG409AK in an existing PCB?
The DG409AK/883B can be considered for an existing 16-pin through-hole layout after confirming its CDIP dimensions, pin assignments, and operating requirements against the original design. The documented DG409AK/883B is described as a 16-CDIP dual 4:1 CMOS analog multiplexer, matching the functional organization of DG409AK. However, the slash-883 suffix may indicate additional military-oriented processing, so it is not automatically equivalent for every commercial application. Confirm temperature grade, screening, supply tolerance, and procurement status.
DG409AK vs DG409AK/883B: which is better for a legacy control system?
The standard DG409AK is the better choice for a legacy commercial system that explicitly specifies the original DG409AK ordering code, while the DG409AK/883B may be preferable when the original documentation requires 883 processing or screened sourcing. Both belong to the same DG409AK dual 4:1 family and use a 16-pin through-hole package format. The decision should be based on the exact procurement specification, qualification requirements, and lifecycle condition rather than an assumption that every slash-suffix variant has identical commercial terms.
When should I choose DG409AK over a modern surface-mount analog switch?
Choose the DG409AK when maintaining an existing 16-pin through-hole design, reproducing an approved legacy instrument, or avoiding an unnecessary PCB redesign is more important than obtaining a current lifecycle status. Its dual 4:1 configuration, 100-ohm maximum on resistance, and 150-ns maximum switching times remain useful for many signal-routing tasks. For new high-volume designs, a current surface-mount multiplexer may offer a smaller footprint, newer qualification information, and simpler procurement, but it is not a direct same-package replacement.
Is DG409AK suitable for instrumentation and sensor measurement?
The DG409AK is suitable for instrumentation and sensor measurement when the switched signals fit its input range and the associated leakage, charge injection, and 100-ohm maximum on resistance are acceptable. The 1.5-ohm channel-to-channel matching helps reduce gain variation between sensor channels, while dual 4:1 sections can select two inputs concurrently. For high-impedance sensors or precision bridges, validate the complete signal chain and consider a switch with lower leakage or lower resistance.
Where can I buy DG409AK online?
Use the Request a Quote form on this page to request the current DG409AK quotation, stock position, minimum order quantity, and expected lead time. The component is identified as obsolete, so availability may depend on original inventory or approved sourcing rather than routine production allocation. Quote requests should include the exact DG409AK suffix, target quantity, date-code requirements, and any 883 processing or screening requirements. This avoids accidentally ordering a different DG409 package or ordering code.
What is the price of DG409AK?
The current DG409AK commercial price should be requested through the Request a Quote form on this page because the device is obsolete and its cost can vary with quantity, remaining inventory, traceability, and required processing. The quotation should specify the exact DG409AK ordering code rather than a generic DG409 family designation. For long-term maintenance, request separate availability and lead-time confirmation for the standard part and any screened or military-style ordering option.
What is the lead time for DG409AK?
The current DG409AK lead time depends on remaining original inventory and the screening, traceability, and delivery requirements of the order. Because the component is listed as obsolete, the manufacturer may not guarantee standard production lead times for this ordering code. Submit a quote request stating the required quantity, target date, acceptable date codes, and whether 883 processing is mandatory. The supplier can then confirm whether the request can be filled from original stock and what lead time applies to that configuration.
Is DG409AK in stock?
Stock for the obsolete DG409AK should be confirmed through the Request a Quote form on this page rather than assumed from the existence of a catalog listing. A distributor may show historical or limited inventory without a reusable production allocation. Include the desired quantity and required traceability in the request, and ask for a dated stock confirmation and lead-time estimate. This is especially important when the DG409AK is being used to sustain older industrial or medical-equipment production lines.

נתוני עזר הנדסיים עבור DG409AK — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose DG409AK when maintaining an existing design that specifically calls for the standard 16-pin CERDIP ordering code and does not require 883 processing. Choose DG409AK/883B when its documented 16-pin CDIP construction and 883B processing are explicitly suitable for the procurement specification, while recognizing that qualification and sourcing conditions may differ. Choose DG409AK/883 for another legacy ordering route with the same dual 4:1 function and 16-pin CDIP format. None of these choices restores normal production lifecycle status, so long-term programs should include dated inventory inspection and an approved second sourcing plan. For a new design, evaluate a current DG409-family member or another surface-mount multiplexer when PCB area, procurement continuity, and modern qualification are more important than preserving the ceramic through-hole footprint.

השוואה עם חלופות

פרמטר מוצר זה DG409AK/883B DG409AK/883
Package 16-pin CERDIP 16-pin CDIP 16-pin CDIP
Brand Analog Devices Analog Devices Analog Devices
Multiplexer Configuration Dual 4:1 Dual 4:1 Dual 4:1
Number of Circuits 2 circuits 2 circuits 2 circuits
Maximum On-State Resistance 100 ohms maximum 100 ohms maximum 100 ohms maximum
Channel-to-Channel Matching 1.5 ohms maximum 1.5 ohms maximum 1.5 ohms maximum
Maximum Turn-On Time 150 ns maximum 150 ns maximum 150 ns maximum
Maximum Turn-Off Time 150 ns maximum 150 ns maximum 150 ns maximum
Supply Voltage Range 5 V to 30 V single; ±5 V to ±20 V dual 5 V to 30 V single; ±5 V to ±20 V dual 5 V to 30 V single; ±5 V to ±20 V dual
Charge Injection 15 pC maximum 15 pC maximum 15 pC maximum
Input Leakage 100 nA maximum 100 nA maximum 100 nA maximum
Processing Designation Standard DG409AK 883B designation 883 designation

מבדילים עיקריים

  • Dual independent analog routing sections (לעומתDG409AK/883B)
  • Direct 16-pin through-hole family substitution (לעומתDG409AK/883)
  • Legacy ceramic-package construction (לעומתDG409AK/883B)

הערות תכנון

Treat the 100-ohm maximum on resistance as part of the complete signal-path impedance. In a series path with source resistance Rs and load resistance RL, the switch contributes up to 100 ohms, creating a divider that can attenuate the selected signal. Use a low source impedance and high input impedance when preserving amplitude matters. Also evaluate capacitance and propagation delay at the operating frequency, because the 150-ns switching-time rating alone does not describe the complete analog bandwidth.

Use the manufacturer pin-configuration table to assign the 16-pin through-hole footprint and confirm whether the board requires a ceramic or plastic DIP outline. Keep the two multiplex sections' supply and ground pins connected according to the DG409 family guidance. Route the selected analog signals away from digital control traces where possible, provide a solid ground reference, and avoid long stubs between the package and front-end components because they can increase coupling and settling time.

Do not select the DG409AK solely from the 4:1 multiplexing label. Verify the exact ordering code, package outline, pin assignments, supply arrangement, absolute-maximum input voltage, temperature grade, and processing requirements before substitution. The DG409AK/883 and DG409AK/883B options may differ in screening and sourcing conditions even though they retain the same core DG409AK function and 16-pin through-hole package format.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The DG409 family documentation identifies ESD protection greater than 2000 V, but it does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the DG409AK ordering code. The 883 designation should not be treated as an automotive qualification without a specific qualification record.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

dg409 kicad DG409AK datasheet DG409AK datasheet pdf DG409AK pinout DG409AK schematic DG409AK equivalent DG409AK replacement DG409AK cross reference DG409AK footprint DG409AK vs DG409AK/883B Analog Devices DG409AK DG409AK price

רכיבים ומונחים קשורים

Analog Devices DG409AK DG409AK/883B DG409AK/883 DG409 family analog multiplexer analog switch CMOS interface IC semiconductor dual 4:1 multiplexer on-state resistance channel-to-channel matching charge injection input leakage turn-on time turn-off time TTL-compatible control CMOS-compatible control rail-to-rail signal handling ESD protection CERDIP-16 CDIP-16 through-hole package automated test equipment data acquisition
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר