EFM32TG842F16-D-QFP64 - 32MHz Tiny Gecko | Silicon Labs
MPN: EFM32TG842F16-D-QFP64 ✓ פעילEFM32TG842F16-D-QFP64 סקירה
An MCU is a single-chip embedded controller that integrates a processor core, programmable memory, digital I/O, timers, and communication peripherals on one semiconductor die. The EFM32 Tiny Gecko family belongs to the ARM Cortex-M microcontroller hierarchy and is designed for applications where low power, deterministic control, and compact integrated control are more important than maximum processor performance or large memory capacity.
The EFM32TG842F16-D-QFP64 runs at up to 32 MHz and provides 16 kB of Flash for firmware plus 4 kB of RAM for working data. Its 53 digital I/O pins support external sensors, indicators, switches, and control interfaces. Two 16-bit timers handle periodic timing, pulse measurement, and motor or actuator control tasks. The operating supply range is listed as 1.85 V to 3.8 V, supporting low-voltage embedded systems.
Technically, the device uses an ARM Cortex-M3 processor with a 32-bit RISC architecture and an operating speed of up to 32 MHz. The processor includes a Memory Protection Unit supporting as many as eight memory segments, while the Wake-up Interrupt Controller permits interrupt servicing during sleep. These features support low-latency control without requiring the system to remain in its most energy-intensive active mode at all times.
Typical uses include industrial sensor nodes, compact environmental monitors, wearable accessories, smart-home endpoints, energy meters, and small industrial controllers. Its combination of 53 digital I/O pins and two 16-bit timers is useful in designs that must monitor multiple discrete inputs while maintaining deterministic periodic control. The 16 kB Flash capacity is best suited to compact applications rather than firmware-intensive gateways or elaborate graphical systems.
PCB design should follow the manufacturer pin table and recommended decoupling layout. Keep the 32 MHz clock and sensitive signal routes away from noisy switching nodes, provide local supply bypassing at the device power pins, and confirm every external signal against the TQFP-64 pin description before fabrication. Review operating temperature and ordering details when qualifying the part for an industrial design.
This product page combines the manufacturer specifications, package information, practical application guidance, and same-family drop-in options. It also highlights memory and timer differences among EFM32TG842 variants so engineers can select a replacement without confusing software compatibility with package compatibility.
חלופות תחליף ישיר עבור EFM32TG842F16-D-QFP64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EFM32TG842F16-D-QFP64 (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory, Package, Product Type, Display Support, Processor Core.
EFM32TG842F16-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32TG842F32-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32TG842F8-QFP64
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32TG842F16-D-QFP64 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Core | ARM Cortex-M3 |
| CPU Architecture | 32-bit RISC |
| Flash Memory | 16 kB |
| RAM Memory | 4 kB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| מתח אספקה פעיל | 1.85 V to 3.8 V |
| מארז | 64-pin TQFP, 10 mm x 10 mm |
| סוג הרכבה | Surface mount |
| Memory Protection Unit | Up to 8 memory segments |
| Wake-Up Interrupt Controller | Yes |
| Low-Power Modes | Energy-saving modes with fast wake-up |
| טמפרטורת פעולה | -40 °C to +85 °C |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
מדריך תצורת פינים של EFM32TG842F16-D-QFP64 64-pin tqfp, 10 mm x 10 mm
תצורת פינים עבור EFM32TG842F16-D-QFP64 (מארזת 64-pin tqfp, 10 mm x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EFM32TG842F16-D-QFP64.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EFM32TG842F16-D-QFP64 מתאים עבור 6 יישוםs: Industrial Sensor Node, Smart Home Controller, Battery-Powered Environmental Monitor, Wearable Accessory Controller, Energy Metering Front End, Small Motor and Actuator Controller.
Industrial Sensor Node
The EFM32TG842F16-D-QFP64 is suitable for compact industrial sensor nodes that combine several discrete inputs with low-power periodic control. Its 53 digital I/O pins can connect switch states, alarm inputs, and digital sensors without requiring a large external I/O expander. Two 16-bit timers support periodic sampling, timeout handling, and pulse-based sensor timing. At up to 32 MHz, the Cortex-M3 core can process control logic while the Tiny Gecko low-energy modes reduce activity between measurements. The 16 kB Flash and 4 kB RAM are suitable for compact firmware, although protocol stacks and extensive data buffering should be included in the final memory budget.
מומלץ
Smart Home Controller
The EFM32TG842F16-D-QFP64 can serve as the local controller in a smart-home sensor, actuator, or wall-switch design. Its 53 digital I/O pins provide substantial connectivity for relay-control outputs, button inputs, and status indicators, while two 16-bit timers can handle timing functions such as debounce intervals or configurable pulse generation. The 32 MHz Cortex-M3 core is suitable for protocol handling and local control logic, and the energy-saving modes support devices expected to remain idle for long periods. Designers should reserve Flash and RAM space for the chosen communication stack and account for the 1.85 V to 3.8 V operating range in the power-supply design.
מומלץ
Battery-Powered Environmental Monitor
The EFM32TG842F16-D-QFP64 fits battery-powered environmental monitors where a sensor interface, periodic sampling, and local status reporting must coexist in a compact controller. The low-energy platform and fast wake-up behavior reduce the amount of time the processor remains active, while the 53 I/O pins support digital environmental sensors and configuration switches. Two 16-bit timers can establish sample intervals or measure sensor pulses. With 16 kB of Flash and 4 kB of RAM, the MCU is appropriate for compact firmware and buffered measurements. The final battery-life calculation should include sensor standby current, regulator efficiency, wake-up frequency, and the controller's active-time contribution.
מומלץ
Wearable Accessory Controller
The EFM32TG842F16-D-QFP64 can be used in a wearable accessory or compact personal-device controller that requires low-power operation and multiple discrete inputs. Its 32 MHz ARM Cortex-M3 core provides responsive local control, while the 53 digital I/O pins can support buttons, haptic outputs, indicators, and attached sensor signals. The two 16-bit timers are useful for debounce, periodic activity, and pulse-based sensing. Fast wake-up behavior helps the controller respond without maintaining continuous full-speed operation, and the energy-saving modes help control average consumption. Package size and exposed I/O availability should be checked against the wearable enclosure before layout begins.
מומלץ
Energy Metering Front End
The EFM32TG842F16-D-QFP64 is applicable to metering front ends that collect digital measurement signals and perform local control or data conditioning. The 53 digital I/O pins allow connection of pulse-output sensors, status flags, and control signals, while the two 16-bit timers support pulse counting, duty-cycle measurement, and periodic sampling. Its 32 MHz Cortex-M3 core can process acquisition logic, and the low-power modes are valuable in meters that spend substantial time idle. The 16 kB Flash footprint is appropriate for compact protocol and measurement code, while 4 kB of RAM can support short measurement buffers. Calibration, isolation, safety, and regulatory requirements remain application-specific and must be assessed separately.
מומלץ
Small Motor and Actuator Controller
The EFM32TG842F16-D-QFP64 can coordinate small motors, valves, or other actuators when a design requires many digital control and status signals. Its two 16-bit timers provide useful timing resources for pulse-width control, periodic motion commands, or input capture, while the 53 digital I/O pins support sensors, limit switches, and driver-control signals. The 32 MHz Cortex-M3 core can execute deterministic control sequences and communicate with an external driver. Low-energy modes may reduce consumption when the actuator is inactive. Designers must verify output switching requirements, add appropriate driver and protection circuitry, and keep switching-node return currents away from sensitive controller traces.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EFM32TG842F16-D-QFP64 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EFM32TG842F16-QFP64 | EFM32TG842F32-QFP64 | EFM32TG842F8-QFP64 |
|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 kB | 16 kB | 32 kB | 8 kB |
| RAM Memory | 4 kB | 4 kB | 4 kB | 2 kB |
| Digital I/O Pins | 53 pins | 53 pins | 53 pins | 53 pins |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
| Operating Supply Voltage | 1.85 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Low-Power Features | Energy-saving modes and fast wake-up | Energy-saving modes and fast wake-up | Energy-saving modes and fast wake-up | Energy-saving modes and fast wake-up |
מבדילים עיקריים
- Balanced memory configuration within the EFM32TG842 family (לעומתEFM32TG842F8-QFP64)
- Lower flash requirement than the F32 alternative (לעומתEFM32TG842F32-QFP64)
- Consistent high-speed control and I/O resources across same-package variants (לעומתEFM32TG842F16-QFP64)
הערות תכנון
Place the device power pins and supporting bypass network directly beneath or adjacent to the corresponding TQFP-64 lands. Keep the high-frequency return path short and use a continuous ground reference wherever possible. Follow the manufacturer's package drawing and pin-description table for exposed-pad, power, and ground assignments; a generic TQFP-64 footprint is not a substitute for the device-specific drawing.
Route the 32 MHz clock and other timing-sensitive signals away from high-current switching edges, relay drivers, and inductor nodes. Maintain short return paths beneath clock and high-speed nets, avoid routing through digital I/O regions where switching can inject noise, and place crystal or external clock components close to their assigned pins according to the manufacturer reference circuit.
Design the 1.85 V to 3.8 V operating range into the power tree rather than treating the device as a 5 V-tolerant input. Confirm startup voltage, regulator accuracy, load transient response, and brownout behavior across temperature. Local decoupling should be selected using the capacitor recommendations and stability guidance in the manufacturer datasheet.
Do not treat every EFM32TG842 suffix as electrically interchangeable without checking the memory configuration, temperature grade, and orderable packaging. The F32 option doubles Flash to 32 kB, while the F8 option reduces Flash to 8 kB and RAM to 2 kB. Validate the firmware image, linker memory map, startup configuration, and pin functions after any substitution.
מידע על תאימות
The manufacturer product information identifies the EFM32TG842F16-D-QFP64 as an industrial-temperature device but does not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.