Silicon Labs

EFM32TG842F16-D-QFP64 - 32MHz Tiny Gecko | Silicon Labs

MPN: EFM32TG842F16-D-QFP64 ✓ Aktif
1.85 V to 3.8 V Vdss 64-pin TQFP, 10 mm x 10 mm Package 32 MHz Speed 16 kB Memory
MOQ: 1 |

EFM32TG842F16-D-QFP64 Ringkasan

Silicon Labs EFM32TG842F16-D-QFP64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 kB of Flash memory, 4 kB of RAM, and 53 digital I/O pins in a 64-pin TQFP package. It combines embedded microcontroller processing with low-energy operating techniques, fast wake-up behavior, and energy-saving modes for compact, battery-operated equipment.

An MCU is a single-chip embedded controller that integrates a processor core, programmable memory, digital I/O, timers, and communication peripherals on one semiconductor die. The EFM32 Tiny Gecko family belongs to the ARM Cortex-M microcontroller hierarchy and is designed for applications where low power, deterministic control, and compact integrated control are more important than maximum processor performance or large memory capacity.

The EFM32TG842F16-D-QFP64 runs at up to 32 MHz and provides 16 kB of Flash for firmware plus 4 kB of RAM for working data. Its 53 digital I/O pins support external sensors, indicators, switches, and control interfaces. Two 16-bit timers handle periodic timing, pulse measurement, and motor or actuator control tasks. The operating supply range is listed as 1.85 V to 3.8 V, supporting low-voltage embedded systems.

Technically, the device uses an ARM Cortex-M3 processor with a 32-bit RISC architecture and an operating speed of up to 32 MHz. The processor includes a Memory Protection Unit supporting as many as eight memory segments, while the Wake-up Interrupt Controller permits interrupt servicing during sleep. These features support low-latency control without requiring the system to remain in its most energy-intensive active mode at all times.

Typical uses include industrial sensor nodes, compact environmental monitors, wearable accessories, smart-home endpoints, energy meters, and small industrial controllers. Its combination of 53 digital I/O pins and two 16-bit timers is useful in designs that must monitor multiple discrete inputs while maintaining deterministic periodic control. The 16 kB Flash capacity is best suited to compact applications rather than firmware-intensive gateways or elaborate graphical systems.

PCB design should follow the manufacturer pin table and recommended decoupling layout. Keep the 32 MHz clock and sensitive signal routes away from noisy switching nodes, provide local supply bypassing at the device power pins, and confirm every external signal against the TQFP-64 pin description before fabrication. Review operating temperature and ordering details when qualifying the part for an industrial design.

This product page combines the manufacturer specifications, package information, practical application guidance, and same-family drop-in options. It also highlights memory and timer differences among EFM32TG842 variants so engineers can select a replacement without confusing software compatibility with package compatibility.

Alternatif penggantian untuk EFM32TG842F16-D-QFP64 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EFM32TG842F16-D-QFP64 (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Package, Product Type, Display Support, Processor Core.

Silicon Labs
Package: 64-TQFP
Display Support: LCD MCU
Bandingkan dengan EFM32TG842F16-D-QFP64 →
Silicon Labs
Flash Memory: 32 KB (32K x 8)
Package: 64-TQFP (10 x 10 mm)
Display Support: LCD controller
Bandingkan dengan EFM32TG842F16-D-QFP64 →
Silicon Labs
Flash Memory: 8 kB (8K x 8)
Package: 64-TQFP (10 x 10 mm)
Product Type: ARM Cortex-M3 Tiny Gecko microcontroller (MCU)
Bandingkan dengan EFM32TG842F16-D-QFP64 →

EFM32TG842F16-QFP64

✅ Drop-In
Silicon Labs
📦 TQFP-64 (10x10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32 MHz · 16 KB · 4 KB · 53 pins · 2 x 16-bit timers

Kontak untuk harga

Lihat Datasheet →

EFM32TG842F32-QFP64

✅ Drop-In
Silicon Labs
📦 TQFP-64 (10x10 mm)
32-bit ARM Cortex-M3 Microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3, 32-bit RISC · 32 KB (32K x 8) · 4 KB · 53 pins · 2 x 16-bit timers

Kontak untuk harga

Lihat Datasheet →

EFM32TG842F8-QFP64

✅ Drop-In
Silicon Labs
📦 TQFP-64 (10x10 mm)
ARM Cortex-M3 Tiny Gecko microcontroller (MCU) · ARM Cortex-M3, 32-bit · 32 MHz · 8 kB (8K x 8) · 2 kB · 53 pins · 2 x 16-bit timers · 1.85 V to 3.8 V

Kontak untuk harga

Lihat Datasheet →

EFM32TG842F16-D-QFP64 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Processor Core ARM Cortex-M3
CPU Architecture 32-bit RISC
Flash Memory 16 kB
RAM Memory 4 kB
Digital I/O Pins 53 pins
Timers 2 x 16-bit timers
Tegangan Pemuat Kerja 1.85 V to 3.8 V
Paket 64-pin TQFP, 10 mm x 10 mm
Tipe Mounting Surface mount
Memory Protection Unit Up to 8 memory segments
Wake-Up Interrupt Controller Yes
Low-Power Modes Energy-saving modes with fast wake-up
Suhu Kerja -40 °C to +85 °C
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

EFM32TG842F16-D-QFP64 64-pin tqfp, 10 mm x 10 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk EFM32TG842F16-D-QFP64 (64-pin tqfp, 10 mm x 10 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 64-pin tqfp, 10 mm x 10 mm untuk EFM32TG842F16-D-QFP64

Tidak ada data diatribut pin yang tersedia untuk EFM32TG842F16-D-QFP64.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

EFM32TG842F16-D-QFP64 cocok untuk 6 aplikasis: Industrial Sensor Node, Smart Home Controller, Battery-Powered Environmental Monitor, Wearable Accessory Controller, Energy Metering Front End, Small Motor and Actuator Controller.

🏭

Industrial Sensor Node

The EFM32TG842F16-D-QFP64 is suitable for compact industrial sensor nodes that combine several discrete inputs with low-power periodic control. Its 53 digital I/O pins can connect switch states, alarm inputs, and digital sensors without requiring a large external I/O expander. Two 16-bit timers support periodic sampling, timeout handling, and pulse-based sensor timing. At up to 32 MHz, the Cortex-M3 core can process control logic while the Tiny Gecko low-energy modes reduce activity between measurements. The 16 kB Flash and 4 kB RAM are suitable for compact firmware, although protocol stacks and extensive data buffering should be included in the final memory budget.

🧩

Smart Home Controller

The EFM32TG842F16-D-QFP64 can serve as the local controller in a smart-home sensor, actuator, or wall-switch design. Its 53 digital I/O pins provide substantial connectivity for relay-control outputs, button inputs, and status indicators, while two 16-bit timers can handle timing functions such as debounce intervals or configurable pulse generation. The 32 MHz Cortex-M3 core is suitable for protocol handling and local control logic, and the energy-saving modes support devices expected to remain idle for long periods. Designers should reserve Flash and RAM space for the chosen communication stack and account for the 1.85 V to 3.8 V operating range in the power-supply design.

🔋

Battery-Powered Environmental Monitor

The EFM32TG842F16-D-QFP64 fits battery-powered environmental monitors where a sensor interface, periodic sampling, and local status reporting must coexist in a compact controller. The low-energy platform and fast wake-up behavior reduce the amount of time the processor remains active, while the 53 I/O pins support digital environmental sensors and configuration switches. Two 16-bit timers can establish sample intervals or measure sensor pulses. With 16 kB of Flash and 4 kB of RAM, the MCU is appropriate for compact firmware and buffered measurements. The final battery-life calculation should include sensor standby current, regulator efficiency, wake-up frequency, and the controller's active-time contribution.

📱

Wearable Accessory Controller

The EFM32TG842F16-D-QFP64 can be used in a wearable accessory or compact personal-device controller that requires low-power operation and multiple discrete inputs. Its 32 MHz ARM Cortex-M3 core provides responsive local control, while the 53 digital I/O pins can support buttons, haptic outputs, indicators, and attached sensor signals. The two 16-bit timers are useful for debounce, periodic activity, and pulse-based sensing. Fast wake-up behavior helps the controller respond without maintaining continuous full-speed operation, and the energy-saving modes help control average consumption. Package size and exposed I/O availability should be checked against the wearable enclosure before layout begins.

⚡

Energy Metering Front End

The EFM32TG842F16-D-QFP64 is applicable to metering front ends that collect digital measurement signals and perform local control or data conditioning. The 53 digital I/O pins allow connection of pulse-output sensors, status flags, and control signals, while the two 16-bit timers support pulse counting, duty-cycle measurement, and periodic sampling. Its 32 MHz Cortex-M3 core can process acquisition logic, and the low-power modes are valuable in meters that spend substantial time idle. The 16 kB Flash footprint is appropriate for compact protocol and measurement code, while 4 kB of RAM can support short measurement buffers. Calibration, isolation, safety, and regulatory requirements remain application-specific and must be assessed separately.

🔧

Small Motor and Actuator Controller

The EFM32TG842F16-D-QFP64 can coordinate small motors, valves, or other actuators when a design requires many digital control and status signals. Its two 16-bit timers provide useful timing resources for pulse-width control, periodic motion commands, or input capture, while the 53 digital I/O pins support sensors, limit switches, and driver-control signals. The 32 MHz Cortex-M3 core can execute deterministic control sequences and communicate with an external driver. Low-energy modes may reduce consumption when the actuator is inactive. Designers must verify output switching requirements, add appropriate driver and protection circuitry, and keep switching-node return currents away from sensitive controller traces.

What are the key specifications of EFM32TG842F16-D-QFP64 that engineers should know?
The EFM32TG842F16-D-QFP64 is a 32 MHz ARM Cortex-M3 microcontroller with 16 kB of Flash, 4 kB of RAM, 53 digital I/O pins, and two 16-bit timers in a 64-pin TQFP package. According to the Silicon Labs product page and EFM32TG842 datasheet, it uses a 1.85 V to 3.8 V supply range and supports low-energy operation with fast wake-up behavior.
What is the operating voltage of EFM32TG842F16-D-QFP64?
The EFM32TG842F16-D-QFP64 operates from 1.85 V to 3.8 V. The manufacturer datasheet identifies the device as a low-voltage 3.3 V-class embedded controller, while the family documentation describes a nominal 1.98 V to 3.8 V operating range. Use the manufacturer power-supply limits when designing the regulator and decoupling network.
Where can I download the EFM32TG842F16-D-QFP64 datasheet PDF?
The EFM32TG842F16-D-QFP64 datasheet PDF can be obtained from the Silicon Labs device page or the manufacturer-linked EFM32TG842 documentation. The document covers the Cortex-M3 core, memory organization, electrical characteristics, package pinout, and peripheral functions. Use the manufacturer PDF for board layout and qualification because third-party mirrors may contain older revisions.
Where can I find the EFM32TG842F16-D-QFP64 pinout?
The EFM32TG842F16-D-QFP64 pinout is published in the manufacturer datasheet under the TQFP-64 package and pin-description tables. The device uses a 10 mm by 10 mm 64-pin TQFP package. Assign PCB nets from that package-specific table, including power, ground, reset, clock, and I/O functions, rather than relying on a generic TQFP-64 drawing.
Is EFM32TG842F16-D-QFP64 suitable for battery-powered sensor applications?
Yes, the EFM32TG842F16-D-QFP64 suits battery-powered sensor applications because its Tiny Gecko platform includes energy-saving modes and fast wake-up behavior. Its 16 kB Flash, 4 kB RAM, 53 I/O pins, and two 16-bit timers support compact acquisition and control tasks without requiring a separate processor or discrete timer IC.
How much Flash and RAM does EFM32TG842F16-D-QFP64 have?
The EFM32TG842F16-D-QFP64 contains 16 kB of Flash memory and 4 kB of RAM. The Silicon Labs product page identifies the Flash as 16K x 8 and the RAM as 4 kB. These figures make the device appropriate for compact firmware, but designers should check application firmware size, stack requirements, and data-buffer needs before finalizing the MCU selection.
What can replace the EFM32TG842F16-D-QFP64 on the same PCB footprint?
The closest same-package replacement is the EFM32TG842F32-QFP64, which retains the 64-pin TQFP footprint, 32 MHz Cortex-M3 core, 53 I/O pins, and two 16-bit timers while increasing Flash from 16 kB to 32 kB. The EFM32TG842F8-QFP64 also uses the footprint but provides only 8 kB of Flash and 2 kB of RAM, so its memory reduction requires careful review.
EFM32TG842F16-D-QFP64 vs EFM32TG842F32-QFP64 - which is better for firmware-heavy control?
The EFM32TG842F32-QFP64 is better when firmware size is the main constraint because it doubles Flash from 16 kB to 32 kB while retaining the same 32 MHz Cortex-M3 core, 4 kB RAM, 53 I/O pins, and TQFP-64 package. The target EFM32TG842F16-D-QFP64 remains sufficient when its 16 kB firmware image fits comfortably and the lower-memory selection is preferred.
When should I choose EFM32TG842F16-D-QFP64 over EFM32TG842F8-QFP64?
Choose the EFM32TG842F16-D-QFP64 when the application needs more program memory or RAM than the 8 kB Flash and 2 kB RAM configuration of the EFM32TG842F8-QFP64. Both devices operate up to 32 MHz and provide 53 digital I/O pins with two 16-bit timers in the same TQFP-64 package, but the F16 option offers twice the Flash and RAM.
Can EFM32TG842F16-QFP64 replace EFM32TG842F16-D-QFP64?
The EFM32TG842F16-QFP64 is the base device designation associated with the target and shares its 32 MHz Cortex-M3 core, 16 kB Flash, 4 kB RAM, 53 I/O pins, and TQFP-64 package. Whether the -D ordering code may be substituted depends on the required temperature grade and purchasing format. Confirm the orderable suffix and grade before approving the substitution.
What is the best drop-in replacement for EFM32TG842F16-D-QFP64?
The EFM32TG842F32-QFP64 is the strongest drop-in option because it retains the same TQFP-64 footprint, 32 MHz Cortex-M3 processor, 53 digital I/O pins, two 16-bit timers, and 4 kB RAM while increasing Flash to 32 kB. The EFM32TG842F8-QFP64 is another footprint match, but its 8 kB Flash and 2 kB RAM require a memory-budget review.
Is there a verified cross-brand drop-in replacement for EFM32TG842F16-D-QFP64?
No verified cross-brand drop-in replacement is identified for the EFM32TG842F16-D-QFP64. The documented alternatives are Silicon Labs EFM32TG842 variants with the same TQFP-64 family footprint, while the cross-reference results do not establish pin-for-pin compatibility for another manufacturer. A functional substitute may require different firmware, peripheral mapping, and PCB changes.
Where to buy EFM32TG842F16-D-QFP64 online?
Use the Request a Quote form on this page to request EFM32TG842F16-D-QFP64 availability, quantity, and orderable packaging. The form is the appropriate route for current commercial terms because inventory and lead time can change independently of the device datasheet. Include your target quantity and required suffix when requesting a quotation.
What is the price of EFM32TG842F16-D-QFP64?
Current commercial pricing for the EFM32TG842F16-D-QFP64 is obtained through the Request a Quote form on this page. The request should specify the exact orderable MPN, quantity, shipment destination, and packaging requirement. This avoids confusion with the EFM32TG842F16-D-QFP64R reel-ordering variant or other EFM32TG842 memory configurations.
What is the lead time for EFM32TG842F16-D-QFP64?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the exact suffix, order quantity, and manufacturer channel availability, so a generic period would not accurately represent every order. Specify whether the requirement is for the base QFP64 orderable code or the -D-QFP64R reel format when submitting the request.

Data referensi engineering untuk EFM32TG842F16-D-QFP64 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the EFM32TG842F16-D-QFP64 when an embedded design needs a 32 MHz Cortex-M3 controller with 16 kB of Flash, 4 kB of RAM, 53 digital I/O pins, and two 16-bit timers in a TQFP-64 package. The EFM32TG842F32-QFP64 is preferable when additional firmware capacity is valuable because it retains the core, I/O count, timers, RAM, speed, and footprint while doubling Flash to 32 kB. The EFM32TG842F8-QFP64 is appropriate for smaller firmware systems, but its 8 kB Flash and 2 kB RAM can constrain protocol stacks, diagnostics, and future expansion. No verified cross-brand pin-for-pin replacement was identified. Before substituting any family member, confirm the exact ordering suffix, temperature grade, package, power limits, pin functions, and firmware memory map.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EFM32TG842F16-QFP64 EFM32TG842F32-QFP64 EFM32TG842F8-QFP64
Package TQFP-64 (10x10 mm) TQFP-64 (10x10 mm) TQFP-64 (10x10 mm) TQFP-64 (10x10 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 16 kB 16 kB 32 kB 8 kB
RAM Memory 4 kB 4 kB 4 kB 2 kB
Digital I/O Pins 53 pins 53 pins 53 pins 53 pins
Timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers
Operating Supply Voltage 1.85 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V
Low-Power Features Energy-saving modes and fast wake-up Energy-saving modes and fast wake-up Energy-saving modes and fast wake-up Energy-saving modes and fast wake-up

Diferensiator Kunci

  • Balanced memory configuration within the EFM32TG842 family (vsEFM32TG842F8-QFP64)
  • Lower flash requirement than the F32 alternative (vsEFM32TG842F32-QFP64)
  • Consistent high-speed control and I/O resources across same-package variants (vsEFM32TG842F16-QFP64)

Catatan Desain

Place the device power pins and supporting bypass network directly beneath or adjacent to the corresponding TQFP-64 lands. Keep the high-frequency return path short and use a continuous ground reference wherever possible. Follow the manufacturer's package drawing and pin-description table for exposed-pad, power, and ground assignments; a generic TQFP-64 footprint is not a substitute for the device-specific drawing.

Route the 32 MHz clock and other timing-sensitive signals away from high-current switching edges, relay drivers, and inductor nodes. Maintain short return paths beneath clock and high-speed nets, avoid routing through digital I/O regions where switching can inject noise, and place crystal or external clock components close to their assigned pins according to the manufacturer reference circuit.

Design the 1.85 V to 3.8 V operating range into the power tree rather than treating the device as a 5 V-tolerant input. Confirm startup voltage, regulator accuracy, load transient response, and brownout behavior across temperature. Local decoupling should be selected using the capacitor recommendations and stability guidance in the manufacturer datasheet.

Do not treat every EFM32TG842 suffix as electrically interchangeable without checking the memory configuration, temperature grade, and orderable packaging. The F32 option doubles Flash to 32 kB, while the F8 option reduces Flash to 8 kB and RAM to 2 kB. Validate the firmware image, linker memory map, startup configuration, and pin functions after any substitution.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer product information identifies the EFM32TG842F16-D-QFP64 as an industrial-temperature device but does not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Pencarian Terkait

EFM32TG842F16-D-QFP64 datasheet EFM32TG842F16-D-QFP64 pinout EFM32TG842F16-D-QFP64 datasheet pdf Silicon Labs EFM32TG842F16-D-QFP64 EFM32TG842F16-D-QFP64 specifications EFM32TG842F16-D-QFP64 TQFP64 EFM32TG842F16-D-QFP64 equivalent EFM32TG842F16-D-QFP64 replacement EFM32TG842F16-D-QFP64 vs EFM32TG842F32-QFP64 EFM32TG842F16-D-QFP64 application circuit EFM32TG842F16-D-QFP64 price EFM32TG842F16-D-QFP64 stock

Komponen dan Istilah Terkait

Silicon Labs EFM32TG842F16-D-QFP64 EFM32TG842F16-QFP64 EFM32TG842F32-QFP64 EFM32TG842F8-QFP64 EFM32 Tiny Gecko ARM Cortex-M3 microcontroller embedded controller 32-bit RISC processor 16 kB Flash 4 kB RAM 53 digital I/O pins 16-bit timer Memory Protection Unit Wake-up Interrupt Controller fast wake-up energy-saving modes TQFP-64 QFN and TQFP package family surface-mount package 32 MHz industrial sensor node battery-powered embedded system Silicon Labs EFM32TG842 datasheet
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ