Renesas Electronics

ISL81486IB - 5V 30Mbps RS-485/RS-422 Transceiver | Renesas

MPN: ISL81486IB ✗ סוף ייצור
5 V Vdss 1.5 mA Id 8-pin SOIC Package
כמות הזמנה מינימלית: 1 |

ISL81486IB סקירה

The Renesas Electronics ISL81486IB is a single 5V RS-485/RS-422 transceiver with half-duplex operation, data rates up to 30Mbps, and an 8-pin SOIC package. It provides one driver and one receiver for balanced industrial-communication links.

An RS-485/RS-422 transceiver is an interface IC that converts differential line signals into logic-level signals and converts logic-level transmit data back into differential outputs. The ISL81486 belongs to the broader transceiver hierarchy: interface IC, RS-485/RS-422 transceiver, and balanced data-communication interface. Such devices connect controllers, sensors, industrial equipment, and field buses to long, noise-prone cable networks.

The key operating characteristics include a 5V supply, half-duplex communication, a maximum specified signaling rate of 30Mbps, and support for both RS-485 and RS-422 applications. The BiCMOS implementation combines low-power CMOS behavior with bipolar output-driver capability. These characteristics make the device relevant to high-speed industrial links where data integrity and common-mode rejection are more important than low pin count.

Renesas identifies the ISL81486 family as a BiCMOS, 5V-powered single transceiver intended for balanced communication. The family was developed with the larger output voltage and higher data-rate capability required by high-speed PROFIBUS-style applications. The ISL81486IB ordering code is supplied in an 8-pin SOIC package, matching the 8-SOIC designation used in distributor product listings.

Typical uses include industrial controller interfaces, PROFIBUS-compatible equipment links, factory automation nodes, instrumentation gateways, and other balanced serial networks operating at elevated data rates. Because the transceiver is half-duplex, bus arbitration and transmit-enable control are central to the host-interface design. The external driver and receiver can also be used in opposite directions to implement a full-duplex RS-422 link when the application permits separate driver and receiver paths.

Design the bus with controlled-impedance differential routing, appropriate termination, common-mode protection, and a return path for the reference ground. Place protection devices close to the connector and keep the balanced traces short and symmetric. Verify operation against the required cable length, data rate, topology, and grounding arrangement because maximum Mbps capability does not by itself guarantee reliable communication over every field-bus installation.

This page combines manufacturer lifecycle information, package identification, functional characteristics, replacement considerations, and practical interface-design guidance. It also distinguishes verified drop-in candidates from package or function differences so engineers can assess legacy production continuity before releasing a redesign.

חלופות תחליף ישיר עבור ISL81486IB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ISL81486IB (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type.

Renesas Electronics
Package: 8-SOIC
Product Type: Single-channel RS-485/RS-422 transceiver
השווה עם ISL81486IB →

ISL4486

✅ Drop-In
📦 8-pin SOIC
Documented family maximum data rate is up to 40Mbps versus 30Mbps for ISL81486IB; enable, timing, and termination functions require verification before substitution.

📋 חלופה להתייחסות (לא בקטלוג)

ISL81485IB

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-pin SOIC
RS-485/RS-422 line transceiver · 1 transceiver · Half-duplex · 5 V · 30 Mbps · RS-485 and RS-422 · BiCMOS · 8-pin SOIC

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL81487IB

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-pin SOIC
Single-channel RS-485/RS-422 transceiver · 5 V · 5 Mbps · 1 · 1 · Half duplex · 1/8 unit load · 70 mV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL81486IB מפרטים

Product Type Single RS-485/RS-422 transceiver
Driver and Receiver Count 1 driver and 1 receiver
מתח אספקה 5 V
Duplex Mode Half duplex
Maximum Data Rate 30 Mbps
Communication Standard RS-485 and RS-422
Logic and Driver Technology BiCMOS
מארז 8-pin SOIC
Package Width 3.90 mm
סוג הרכבה Surface mount
Termination Support 8 termination connections
זרם מנוחה 1.5 mA
Family Maximum Data Rate Up to 40 Mbps
Automotive Qualification Not qualified

מדריך תצורת פינים של ISL81486IB 3.90 mm

תצורת פינים עבור ISL81486IB (מארזת 3.90 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 3.90 mm עבור ISL81486IB

אין נתוני פריסת פינים מפורטים עבור ISL81486IB.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ISL81486IB מתאים עבור 6 יישוםs: High-Speed PROFIBUS Interface, Industrial Automation Controller, Factory Instrumentation Gateway, Data Acquisition Equipment, Motor and Machinery Control, Network Equipment Port.

🏭

High-Speed PROFIBUS Interface

The ISL81486IB fits PROFIBUS-oriented industrial nodes because the Renesas family combines a 5V half-duplex interface, one balanced driver, one balanced receiver, and data-rate capability specifically associated with high-speed PROFIBUS applications. Its listed 30Mbps maximum provides substantial signaling headroom compared with common low-speed field-bus nodes. Place the transceiver between the controller UART and the differential bus, enable the driver only during transmission, and apply the termination network required by the selected bus topology. Validate edge-rate behavior over the actual cable because the transceiver specification does not determine the complete PROFIBUS network’s margin.

🏭

Industrial Automation Controller

The ISL81486IB provides a compact interface between an industrial controller and a balanced field-bus network. Its single-driver, single-receiver arrangement supports half-duplex communication over one pair of bus conductors, while the 8-pin SOIC package keeps the footprint manageable on control hardware. The 30Mbps maximum rate is suitable for communication paths where deterministic timing and noise-resistant differential signaling are priorities. Implement an explicit transmit-enable state machine to prevent bus contention, connect the transceiver ground to the interface reference network, and confirm timing against the controller’s UART characteristics before production release.

🔧

Factory Instrumentation Gateway

The ISL81486IB can bridge a controller UART to a long differential instrument bus in a factory gateway. Differential RS-422 or RS-485 signaling improves noise tolerance compared with a single-ended interface, and the transceiver’s 30Mbps rated capability supports high-speed links when the installed cable and termination are appropriate. Keep the differential trace geometry continuous and add surge protection at the external connector. Since half-duplex operation requires direction control, use a hardware-controlled driver-enable signal and design the firmware turnaround timing to avoid transmitting while another node owns the bus.

📊

Data Acquisition Equipment

The ISL81486IB is appropriate for data-acquisition equipment that must collect measurements from remote sensors over a balanced industrial bus. The 5V supply integrates with embedded control systems, and the single transceiver reduces the logic-channel count compared with separate driver and receiver ICs. Its 30Mbps maximum supports high-throughput acquisition buses, although actual sensor update rates will usually be lower. Configure the bus termination for the cable length, maintain a common reference ground, and test operation with the intended cable because connector transitions and long traces can reduce practical margin even when the transceiver itself meets its maximum data-rate specification.

🔧

Motor and Machinery Control

The ISL81486IB can support communication between machine-control electronics and remote motor-control modules where a robust differential interface is required. Its 30Mbps capability provides high signaling margin for short, controlled industrial wiring, while RS-485/RS-422 operation supports common-mode rejection in electrically noisy environments. Separate the transceiver’s ground reference from high-current motor returns and use a suitable interface ground strategy. Add protection at any cable leaving the enclosure, and verify driver-enable timing during emergency-stop or fault transitions so the node cannot unintentionally claim the bus.

🌐

Network Equipment Port

The ISL81486IB is applicable to specialized network equipment that terminates a balanced serial port rather than an Ethernet PHY. The 5V transceiver supports one half-duplex RS-485 or RS-422 link, and the 30Mbps rating permits high-rate communication over suitable point-to-point or multipoint wiring. For RS-422, the device’s driver and receiver may support complementary communication paths when the system wiring and enable requirements are compatible. Use controlled impedance and symmetrical routing from the transceiver to the connector, preserve a ground reference, and place any protection network where it will not add unacceptable imbalance to the differential pair.

סיכום מוצרים מומלצים

ISL4486 Related 5V half-duplex RS-485/RS-422 transceiver בשימוש ב-: High-Speed PROFIBUS Interface, Industrial Automation Controller, Factory Instrumentation Gateway, Data Acquisition Equipment, Motor and Machinery Control, Network Equipment Port ISL81486IB Renesas Electronics בשימוש ב-: High-Speed PROFIBUS Interface, Industrial Automation Controller, Factory Instrumentation Gateway, Data Acquisition Equipment, Motor and Machinery Control, Network Equipment Port
What is the ISL81486IB?
The ISL81486IB is a Renesas Electronics 5V, half-duplex RS-485/RS-422 transceiver with one driver and one receiver and a maximum data rate of 30Mbps. According to the Renesas ISL4486 and ISL81486 datasheet, the device uses BiCMOS technology and is packaged in an 8-pin SOIC. It is designed for balanced, high-speed industrial communication links and is listed as obsolete.
What is the operating voltage of ISL81486IB?
The ISL81486IB operates from a 5V supply. The Renesas product page and family datasheet identify this part as a 5V-powered BiCMOS transceiver. Its operating voltage range is listed as 5V, while the broader minimum and maximum supply limits and tolerance should be confirmed in the manufacturer datasheet before applying the device outside a nominal 5V system.
What is the maximum data rate of ISL81486IB?
The ISL81486IB supports data rates up to 30Mbps, according to the Renesas manufacturer product listing. The associated ISL4486 and ISL81486 family datasheet describes family capability up to 40Mbps for high-speed PROFIBUS applications. Actual usable rate depends on cable length, topology, termination, transceiver loading, and signal integrity.
Where can I download the ISL81486IB datasheet PDF?
The official Renesas datasheet is available through the ISL4486 and ISL81486 datasheet document page at renesas.com. The manufacturer document covers both related transceivers and their electrical characteristics, while the part-details page identifies ISL81486IB as the 8-pin SOIC ordering option. Use the manufacturer PDF for pin assignments, timing, limits, and application guidance.
Where can I find the ISL81486IB pinout?
The ISL81486IB pinout is defined in the Renesas ISL4486 and ISL81486 family datasheet, whose document page is linked from this product. The component uses an 8-pin SOIC package. Use the pin-description table and package drawing in the manufacturer datasheet when assigning driver input, receiver output, enable, ground, supply, and termination connections.
Is ISL81486IB suitable for PROFIBUS equipment?
Yes, ISL81486IB is suitable for high-speed PROFIBUS-oriented balanced links because the family is explicitly described as providing the larger output voltage and higher data rate required by high-speed PROFIBUS applications. Its 30Mbps maximum rate provides headroom for demanding nodes, although actual PROFIBUS compliance also depends on the complete transceiver, cable, termination, grounding, and network implementation.
Where can I buy ISL81486IB online?
Use the Request a Quote form on this page to request ISL81486IB availability, lead time, and a current quotation. The manufacturer lists the ISL81486 as obsolete and limits support to customers that have already adopted these products. Because lifecycle status can restrict supply, request the exact 8-pin SOIC ordering code rather than substituting a related half-duplex transceiver without engineering review.
What is the price of ISL81486IB?
The current commercial price for obsolete ISL81486IB devices is best requested through the Request a Quote form on this page. Pricing depends on quantity, device condition, traceability, and the supplier’s remaining inventory. Because the manufacturer marks the ISL81486 family obsolete, request a written quotation that identifies the exact ISL81486IB package and lot information.
What is the lead time for ISL81486IB?
Lead time for obsolete ISL81486IB devices should be confirmed through the Request a Quote form on this page. The manufacturer lists the family as obsolete, so new-production lead time is not established by the product page. The quote should state whether the offered parts are factory-new, original packaged stock, or another condition and should include lot traceability.
Is ISL81486IB in stock?
Stock availability for ISL81486IB must be confirmed through the Request a Quote form on this page. The Renesas product page marks the ISL81486 as obsolete and states that support is limited to customers that have already adopted these products. Avoid treating general distributor appearances as guaranteed inventory, and request quantity, condition, packaging, and traceability with the quotation.
What is the best drop-in replacement for ISL81486IB?
The closest documented same-family candidate is the Renesas ISL4486 because both devices appear together in the manufacturer datasheet and occupy the 8-pin SOIC class. ISL4486 is specified as a 5V half-duplex RS-485/RS-422 transceiver with family data-rate capability up to 40Mbps. Confirm enable polarity, driver enable behavior, receiver enable, termination connections, and timing before approving it as a drop-in replacement.
Can ISL4486 replace ISL81486IB?
The ISL4486 is a strong candidate for replacing the ISL81486IB because the Renesas datasheet documents both as 5V, single, half-duplex RS-485/RS-422 transceivers in the 8-pin SOIC family. The documented family maximum reaches 40Mbps versus 30Mbps for ISL81486IB. Final equivalence still requires comparison of pin names, enable logic, propagation delay, receiver enable, and bus termination.
ISL81486IB vs ISL4486: which is better for a high-speed bus?
Choose the ISL81486IB when an existing design depends specifically on its 30Mbps rating and documented behavior; consider the ISL4486 when its up-to-40Mbps family rating and verified pin functions meet the replacement requirements. Both are 5V, single, half-duplex RS-485/RS-422 transceivers associated with the same Renesas family datasheet. The decision should be based on timing, enable polarity, and exact pin-level compatibility rather than maximum rate alone.
When should I choose ISL81486IB over ISL4486?
Choose ISL81486IB when maintaining an approved legacy design, preserving its 30Mbps characterization, or avoiding changes to a qualified communication link is more important than adopting a related family member. Choose ISL4486 only after its pin mapping, enable behavior, timing, and electrical limits have been checked against the original design. The obsolete lifecycle status makes both options candidates for a controlled redesign.
Is ISL81486IB the same as ISL4486?
No, ISL81486IB and ISL4486 are related but distinct Renesas transceivers. Both are described as 5V, single, half-duplex RS-485/RS-422 devices associated with the same family datasheet, and both use an 8-pin SOIC package. Their published maximum-rate positioning differs: ISL81486IB is listed at 30Mbps, while the family description identifies ISL4486 capability up to 40Mbps.
What are the key specifications of ISL81486IB that engineers should know?
The key ISL81486IB specifications are 5V operation, half-duplex RS-485/RS-422 communication, one driver and one receiver, a 30Mbps maximum data rate, BiCMOS implementation, and an 8-pin SOIC package. The manufacturer family datasheet also associates the device with high-speed PROFIBUS applications and identifies family operation up to 40Mbps. Confirm exact pinout and electrical limits in the official datasheet.
What is the best Renesas equivalent for ISL81486IB?
The best directly documented Renesas-family starting point is the ISL4486, because both parts are covered by the same manufacturer datasheet as 5V, single, half-duplex RS-485/RS-422 transceivers using 8-pin SOIC packages. The ISL4486 is positioned for data rates up to 40Mbps, compared with the ISL81486IB listing at 30Mbps. Treat this as a qualified replacement review, not an automatic substitution.

נתוני עזר הנדסיים עבור ISL81486IB — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ISL81486IB when maintaining an approved 5V, half-duplex RS-485/RS-422 design with an 8-pin SOIC footprint and a required 30Mbps signaling rate. It is especially relevant for existing PROFIBUS-oriented equipment where changing the transceiver could affect timing, qualification, or field behavior. Consider the ISL4486 when the manufacturer’s up-to-40Mbps family capability and verified enable, timing, and termination characteristics make it suitable for a controlled redesign. ISL81485IB and ISL81487IB are same-brand family candidates, but their exact data rates and pin-level behavior must be confirmed before either is approved. Because the ISL81486 family is obsolete and supported only for customers that have adopted these products, treat any substitution as a lifecycle project involving schematic review, timing analysis, bus loading checks, and system-level communication testing.

השוואה עם חלופות

פרמטר מוצר זה ISL4486 ISL81485IB ISL81487IB
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Product Type Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver
Supply Voltage 5 V 5 V 5 V 5 V

מבדילים עיקריים

  • Higher listed product-specific data rate than the related family documentation (לעומתISL4486)
  • Exact manufacturer ordering-code identity for the target 8-pin SOIC design (לעומתISL81485IB)
  • BiCMOS implementation supports balanced high-speed communication in one compact device (לעומתISL81487IB)

הערות תכנון

Route the RS-485/RS-422 differential pair as a controlled-impedance pair with matched trace lengths and continuous reference-plane support. Avoid placing digital clocks, switching-regulator nodes, and high-current return paths beneath the bus traces. Keep the transceiver close to the connector-side protection components, and terminate the cable at physically defined endpoints rather than at every node. A short, symmetric interface section reduces common-mode conversion and helps preserve the benefit of differential signaling.

Treat the driver-enable function as a bus-arbitration requirement rather than a simple on/off control. Disable the driver whenever the node is receiving, and prevent two nodes from enabling their drivers simultaneously. Validate enable polarity against the manufacturer pin description because changing that polarity during a redesign can create bus contention even when the transceiver and package appear interchangeable.

Provide a stable 5V rail with low impedance near the transceiver and follow the manufacturer’s recommended bypassing arrangement. Place the local bypass capacitor close to the supply and ground pins, using a short ground return that does not share high-current motor or relay paths. Decoupling alone cannot compensate for an improperly referenced ground system; establish the bus reference and chassis or protection-ground strategy before tuning component placement.

The listed 30Mbps capability is a device-level maximum, not a guarantee of reliable communication at every distance or topology. Verify the installed cable, node spacing, termination values, protection-device capacitance, and propagation-delay budget for the target protocol. Use oscilloscope measurements at the connector when commissioning, with the transceiver enabled for representative traffic patterns, to identify reflections, excessive common-mode conversion, or enable-timing overlap.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Renesas identifies the ISL81486 family as obsolete and states that support is limited to customers that have already adopted these products. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is included in the cited product information.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ISL81486IB datasheet ISL81486IB datasheet pdf ISL81486IB pinout ISL81486IB specifications Renesas ISL81486IB ISL81486IB 5V transceiver ISL81486IB 30Mbps RS-485 ISL81486IB SOIC-8 ISL81486IB PROFIBUS interface ISL81486IB vs ISL4486 ISL81486IB equivalent ISL81486IB replacement ISL81486IB price ISL81486IB stock ISL81486IB application circuit

רכיבים ומונחים קשורים

Renesas Electronics ISL81486IB ISL4486 ISL81485IB ISL81487IB RS-485 RS-422 PROFIBUS half-duplex transceiver single transceiver balanced communication interface IC BiCMOS 8-pin SOIC SOIC package surface-mount package differential signaling driver enable receiver enable bus termination common-mode rejection industrial automation field bus Renesas ISL4486 and ISL81486 datasheet
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר