Renesas Electronics

ISL8324IBZ - Dual SPST Analog Switch, 60 Ohm, 8-SOIC | Renesas

MPN: ISL8324IBZ ✓ פעיל
Single supply Vdss 60 ohm Rds(on) 8-SOIC Package
כמות הזמנה מינימלית: 1 |

ISL8324IBZ סקירה

The Renesas Electronics ISL8324IBZ is a dual SPST analog switch with a 1:1 voltage-transfer configuration, 60 ohm on-resistance, and normally closed switch behavior. The device is packaged in an 8-pin SOIC and operates from a single supply in the ISL8323 through ISL8325 family range of 1 V to 12 V. Its two independent channels make it suitable for routing low-voltage analog and digital signals in compact embedded systems.

An analog switch is an interface IC that connects or disconnects signal paths under digital control. SPST means single-pole, single-throw: one input and one output form a controlled connection for each channel. The normally closed designation means the relevant path is connected before the control input changes state. Together, analog switch, SPST switch, multiplexer interface, and low-voltage switching IC describe the ISL8324IBZ's role within general-purpose interface and power-management electronics.

The headline characteristics are its two switch circuits, 60 ohm on-resistance, 1:1 signal routing, single-supply operation, and 8-SOIC package. The 60 ohm resistance is important when the switch drives a lightly loaded or high-impedance node because it limits the voltage-divider effect between the source and destination. The 1:1 configuration preserves signal polarity rather than inverting the selected signal, which simplifies routing in measurement, control, and embedded peripheral systems.

ISL8324IBZ belongs to the Renesas ISL8323-ISL8325 precision dual analog-switch family. Individual family members can differ in switch polarity, on-resistance, and control behavior, so an engineer should verify the complete pin description and electrical table before substituting one MPN for another. The IBZ ordering code specifically identifies the 8-pin SOIC configuration used in this part.

Typical uses include battery-powered measurement equipment, analog sensor routing, test and measurement systems, and embedded signal-path multiplexing. In each case, the switch can isolate or reconnect a signal node under firmware control. Battery-powered applications benefit from the single-supply operation, while the compact SOIC footprint supports conventional surface-mount assembly and routing in mixed-signal designs.

The principal design consideration is control-state compatibility. Because the ISL8324IBZ is normally closed, firmware and external pull resistors must be evaluated against the default signal path and the desired powered state. Designers should also account for the 60 ohm series resistance when calculating settling behavior, attenuation, and drive requirements for the connected load.

This page organizes the verified switch configuration, package details, application guidance, and engineering trade-offs in one searchable reference. It emphasizes how the dual-channel architecture, normally closed behavior, 1:1 routing, and 60 ohm resistance affect practical circuit decisions when replacing or selecting an analog switching component.

חלופות תחליף ישיר עבור ISL8324IBZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ISL8324IBZ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Switch Configuration, Number of Circuits, Switch Type.

Renesas Electronics
Package: 8-SOIC, 3.90 mm width
Switch Configuration: 2 x SPST, normally open
Switch Type: Normally open
השווה עם ISL8324IBZ →
Renesas Electronics
Package: 8-pin SOIC
Switch Configuration: 1:1
Number of Circuits: 2 circuits
השווה עם ISL8324IBZ →

ISL8323IBZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-SOIC
2 · 2 x SPST, normally open · 60 ohm typical · +2.7 V to +12 V · 5 uW · 100 pA maximum · 5 pC maximum per channel · 9 pF maximum

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL8325IBZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
Renesas Electronics
📦 8-SOIC
Dual SPST analog switch · 2 circuits · 1:1 · 60 ohm · Single supply · Low voltage · 8-pin SOIC · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL8324IBZ דירוגים מרביים ומאפיינים חשמליים

Number of Circuits 2
Switch Configuration Dual SPST
Signal Routing 1:1
On-Resistance 60 ohm
Switch State Normally closed
Supply Type Single supply
Minimum Supply Voltage 1 V
Maximum Supply Voltage 12 V
מארז 8-SOIC
מספר פינים 8 pins
סוג הרכבה Surface mount

מדריך תצורת פינים של ISL8324IBZ 8-soic

תצורת פינים עבור ISL8324IBZ (מארזת 8-soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 8-soic עבור ISL8324IBZ

אין נתוני פריסת פינים מפורטים עבור ISL8324IBZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ISL8324IBZ מתאים עבור 6 יישוםs: Battery-Powered Sensor Routing, Analog Signal Multiplexing, Test and Measurement Systems, Embedded Peripheral Isolation, Low-Voltage Control Signal Routing, Precision Measurement Front Ends.

📱

Battery-Powered Sensor Routing

The ISL8324IBZ fits battery-powered sensor systems because it combines two normally closed SPST channels with single-supply operation from 1 V to 12 V. Each channel can connect an analog sensor path to a shared measurement or processing node, allowing firmware to change which source is presented to the circuit. The 60 ohm on-resistance should be included when calculating signal attenuation, particularly with high-impedance sensor outputs. The 8-SOIC package also keeps the routing stage compact enough for space-constrained portable equipment.

🖥️

Analog Signal Multiplexing

The two independent SPST circuits in the ISL8324IBZ allow a compact analog multiplexer arrangement for low-voltage instrumentation. With a 1:1 transfer configuration, the selected signal retains its polarity as it is routed to a downstream amplifier, converter, or measurement channel. The normally closed state also supports designs that need a connected default path. Because the device presents 60 ohm on-resistance, source and load impedances must be considered together to maintain the required measurement accuracy.

🔧

Test and Measurement Systems

ISL8324IBZ is appropriate for test and measurement equipment that needs to isolate, reconnect, or select low-voltage analog signals under instrument control. Its dual-channel structure can route two related nodes without duplicating the switching stage, while the 8-SOIC package supports conventional PCB layout practices. Designers should account for the 60 ohm path resistance when calculating attenuation and settling, and should verify that the normally closed condition matches the instrument's expected idle state.

🧩

Embedded Peripheral Isolation

The ISL8324IBZ can isolate two embedded peripheral paths from a shared bus or analog section while maintaining a defined default connection. Its single-supply range of 1 V to 12 V suits low-voltage embedded systems, and the dual architecture controls two paths independently. Firmware must deliberately account for the normally closed behavior at startup and during reset. The 60 ohm on-resistance also makes the switch most appropriate for high-impedance nodes rather than low-ohm power or high-current loads.

🏭

Low-Voltage Control Signal Routing

The ISL8324IBZ can route low-voltage control or feedback signals between a controller and external circuitry while providing a 1:1 transfer path. Two normally closed channels can support paired functions such as enable and feedback routing, although each channel still requires the correct default-state treatment in firmware. The 8-SOIC footprint is practical for compact control boards, and single-supply operation allows the switch to share a low-voltage rail. The 60 ohm resistance is acceptable when the receiving input impedance is much higher.

💊

Precision Measurement Front Ends

The ISL8324IBZ fits precision measurement front ends where a source must be disconnected from an amplifier or converter during another measurement. The dual SPST arrangement supports two controlled routing decisions in one 8-SOIC package, and the 1:1 configuration preserves signal polarity. The 60 ohm on-resistance can create an error with finite-impedance sources, so include it in the front-end noise-gain and attenuation calculation. Firmware should also respect the normally closed default connection to prevent unintended source loading.

סיכום מוצרים מומלצים

ISL8324IBZ Renesas Electronics בשימוש ב-: Battery-Powered Sensor Routing, Analog Signal Multiplexing, Test and Measurement Systems, Embedded Peripheral Isolation, Low-Voltage Control Signal Routing, Precision Measurement Front Ends ISL8324IBZ-T Same switch configuration in an alternate ordering format בשימוש ב-: Battery-Powered Sensor Routing, Analog Signal Multiplexing, Test and Measurement Systems, Embedded Peripheral Isolation, Low-Voltage Control Signal Routing, Precision Measurement Front Ends
What is the ISL8324IBZ?
The ISL8324IBZ is a Renesas dual SPST analog switch with two independent normally closed channels, a 1:1 voltage-transfer configuration, and 60 ohm on-resistance. According to the Renesas datasheet, the device is a low-voltage, single-supply IC intended for switching analog signals. It is supplied in an 8-pin SOIC package, making it suitable for compact signal-routing and isolation circuits.
What are the key specifications of ISL8324IBZ that engineers should know?
The ISL8324IBZ provides two SPST switch circuits, 1:1 signal routing, 60 ohm on-resistance, normally closed operation, single-supply operation from 1 V to 12 V, and an 8-SOIC package. These parameters place it in the low-voltage analog-switch category. According to the Renesas datasheet, the two channels allow a designer to control two separate signal paths from a compact surface-mount interface IC.
Is ISL8324IBZ normally open or normally closed?
The ISL8324IBZ is normally closed. According to the Renesas product description, its dual SPST channels provide normally closed switching behavior. This means the controlled path has its normal connection before the control state changes, so firmware, pull resistors, and external circuitry must be designed around that default condition rather than assuming an open circuit at power-up.
What is the on-resistance of ISL8324IBZ?
The ISL8324IBZ has a specified on-resistance of 60 ohm. This value becomes important when the switch connects a source to a relatively high-impedance receiver, because source resistance and receiver input resistance form a divider. According to the Renesas listing and datasheet, the device provides a 1:1 voltage-transfer configuration with no intentional signal inversion.
What supply voltage does ISL8324IBZ use?
The ISL8324IBZ operates from a single supply between 1 V and 12 V. According to the Renesas datasheet, the ISL8323 through ISL8325 devices were designed for low-voltage, single-supply operation. The 1 V lower range supports battery-powered equipment, while the 12 V upper limit accommodates conventional low-voltage rails found in industrial, consumer, and embedded systems.
Where can I download the ISL8324IBZ datasheet PDF?
The ISL8324IBZ datasheet PDF is available through the linked manufacturer-family documentation and the PDF document listed for this exact MPN. The document is titled “Low-voltage, Single Supply, Dual SPST Analog Switches” and covers the ISL8323-ISL8325 family. Use its pin-description table and electrical-characteristics section when assigning controls and checking the normally closed configuration.
Where can I find the ISL8324IBZ pinout?
The ISL8324IBZ pinout is defined in the pin-description table of the Renesas ISL8323-ISL8325 family datasheet. The part uses an 8-SOIC package, so there are eight numbered pins that include the supply, ground, control inputs, and the two independent analog switch paths. Assign PCB tracks directly from the datasheet pin table to avoid confusing the two channels or the normally closed state.
Where can I buy ISL8324IBZ online?
The Request a Quote form on this page is the route for obtaining an ISL8324IBZ quotation, current availability, and order support. The part is listed as a Renesas 2-circuit, 1:1, 60 ohm, 8-SOIC IC switch. Buyers should submit the required quantity and package information in the form so the current commercial response can be matched to the exact ISL8324IBZ ordering code.
What is the price of ISL8324IBZ?
Current ISL8324IBZ commercial terms are shown through the Request a Quote form on this page rather than as a static price. The request should identify the exact ISL8324IBZ MPN, required quantity, and delivery location. This approach ensures that any quotation corresponds to the 8-SOIC ordering code and the current supply position instead of a family-level or differently suffixed device.
What is the lead time for ISL8324IBZ?
The current lead time and minimum order quantity for ISL8324IBZ should be confirmed through the Request a Quote form on this page. The component is an 8-SOIC dual analog switch with a 60 ohm on-resistance and normally closed configuration. Providing the exact MPN and target quantity allows the commercial response to reflect the actual manufacturing and distribution position for this ordering code.
Is ISL8324IBZ in stock?
Current ISL8324IBZ stock status is handled through the Request a Quote form on this page. The form can establish availability for the exact 2-circuit, 1:1, 60 ohm, 8-SOIC device and the quantity required by the project. Avoid substituting a different IBZ suffix or a nearby ISL8323 or ISL8325 member without confirming its pinout and switch behavior.
What is the best drop-in replacement for ISL8324IBZ?
The best drop-in replacement for ISL8324IBZ must preserve the 8-SOIC footprint, pin assignments, normally closed behavior, 1:1 routing, and 60 ohm-class electrical characteristics. No independently validated drop-in candidate is identified for this exact MPN, so replacing it with an unverified family member could change the default switch state or on-resistance. Confirm the manufacturer pin table and electrical limits before approving any substitute.
Can ISL8324IBZ-T replace ISL8324IBZ?
ISL8324IBZ-T is a listed Renesas ordering variant with the same 2-circuit, 1:1, 60 ohm, 8-SOIC switch description, but its suffix and delivery format must be checked before treating it as a procurement equivalent. According to the Renesas listing, it has the same core switch configuration. Verify reel, tape-and-reel, and customer-programming details in the ordering information before substitution.
What can replace ISL8324IBZ?
A valid replacement for ISL8324IBZ must be an 8-pin dual SPST normally closed analog switch with compatible control inputs and comparable 60 ohm on-resistance. The closest candidate named in the Renesas-family documentation is another ISL8324 ordering code, including ISL8324IBZ-T. Treat that as a suffix-format candidate rather than an automatically qualified substitute until its ordering details and operating limits are confirmed.
Is ISL8324IBZ suitable for battery-powered equipment?
The ISL8324IBZ is suitable for battery-powered equipment because the Renesas family supports low-voltage, single-supply operation from 1 V to 12 V. Its two normally closed channels can route or isolate signals while consuming board space efficiently in an 8-SOIC package. The designer must still account for the 60 ohm on-resistance and verify control behavior at the battery system's minimum operating voltage.
ISL8324IBZ vs ISL8324IBZ-T - which is better for production?
Choose ISL8324IBZ or ISL8324IBZ-T according to the approved ordering format rather than an assumed electrical difference. Both listings identify a 2-circuit, 1:1, 60 ohm, 8-SOIC dual SPST switch from Renesas. The relevant decision is the customer’s approved suffix, packaging configuration, and supply plan; confirm those details in the manufacturer ordering information before releasing production documents.
When should I choose ISL8324IBZ over another dual analog switch?
Choose ISL8324IBZ when the circuit specifically needs two normally closed SPST paths, 1:1 signal transfer, 60 ohm on-resistance, and operation from a single 1 V to 12 V supply in an 8-SOIC footprint. If a design requires normally open behavior, lower on-resistance, different logic polarity, or another package, select a different qualified switch rather than relying only on the generic SPST description.
What is the best Renesas equivalent for ISL8324IBZ?
ISL8324IBZ-T is the closest named Renesas candidate because the product listing describes it with the same 2-circuit, 1:1, 60 ohm, 8-SOIC configuration. The distinguishing consideration is the ordering suffix and associated delivery format. According to the Renesas datasheet family, verify control-state, pin, and electrical details before using the alternate ordering code in a new design or repair.

נתוני עזר הנדסיים עבור ISL8324IBZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ISL8324IBZ when the design requires two independent, normally closed SPST analog paths with 1:1 signal transfer in an 8-SOIC package. Its 60 ohm on-resistance is suitable for high-impedance signal nodes, but it may create unacceptable attenuation with low-impedance sources. A normally open switch should be selected when the required default state is an open circuit, while a lower-resistance part is preferable for demanding source-drive applications. Before choosing a replacement, confirm supply range, control polarity, on-resistance, leakage, charge injection, and exact pin assignments. Do not assume that another member of the ISL8323-ISL8325 family is interchangeable merely because it uses an 8-SOIC package.

השוואה עם חלופות

פרמטר מוצר זה
Number of Circuits 2
Switch Configuration Dual SPST
Signal Routing 1:1
On-Resistance 60 ohm
Switch State Normally closed
Supply Configuration Single supply
Supply Voltage Range 1 V to 12 V
Package 8-SOIC
Brand Renesas Electronics
Mounting Type Surface mount

מבדילים עיקריים

  • Two independently controlled analog paths in one package (לעומתSingle-channel analog switch alternatives)
  • Defined normally closed default path (לעומתNormally open analog switch alternatives)
  • Low-voltage single-supply operation (לעומתHigher-voltage dual-supply switch alternatives)

הערות תכנון

Treat the ISL8324IBZ as a normally closed device when designing reset states and control logic. The default closed path can connect an external signal to the downstream circuit before firmware asserts the desired state. Add the appropriate pull resistor so the control input remains in a defined condition during power-up, reset, and brownout, then verify that every connected node can tolerate the default connection.

Include the 60 ohm on-resistance in the source-to-load model. For a voltage source with finite output resistance and a receiving input with finite input resistance, the switch contributes to the voltage divider and can alter gain or measurement accuracy. Use high-impedance receivers where possible, and evaluate settling behavior when the connected node has appreciable capacitance. This is especially important for precision measurement rather than logic-level routing.

Place the ISL8324IBZ close to the analog nodes being switched to minimize trace resistance and susceptibility to injected noise. Route the two switch paths separately from fast digital and switching-converter nodes, maintain a continuous ground reference, and keep the control traces away from sensitive analog traces. Follow the manufacturer's pin-description table when assigning the 8-SOIC footprint and keep unused or reserved pins correctly terminated.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified product information does not state the requested environmental or material-compliance certifications.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ISL8324IBZ datasheet ISL8324IBZ pinout ISL8324IBZ datasheet pdf ISL8324IBZ specifications Renesas ISL8324IBZ ISL8324IBZ 60 ohm ISL8324IBZ 8-SOIC ISL8324IBZ equivalent ISL8324IBZ replacement ISL8324IBZ drop-in replacement ISL8324IBZ vs ISL8324IBZ-T ISL8324IBZ price ISL8324IBZ stock ISL8324IBZ application circuit

רכיבים ומונחים קשורים

Renesas Electronics ISL8324IBZ ISL8324IBZ-T ISL8323 ISL8324 ISL8325 analog switch SPST switch normally closed switch interface IC multiplexer interface semiconductor 1:1 voltage transfer 60 ohm on-resistance single-supply operation 8-SOIC SOIC family surface-mount package battery-powered equipment analog signal routing control input on-resistance signal isolation measurement front end Renesas cross reference
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר