Renesas Electronics

ISL8485IBZ - 5V 5Mbps RS-485/422 Transceiver | Renesas

MPN: ISL8485IBZ ✓ פעיל
4.5 V to 5.5 V Vdss RS-485 and RS-422 Rds(on) 8-pin SOIC Package
כמות הזמנה מינימלית: 1 |

ISL8485IBZ סקירה

The Renesas Electronics ISL8485IBZ is a single half-duplex RS-485/RS-422 transceiver operating from a 4.5 V to 5.5 V supply, with a maximum data rate of 5 Mbps, in an 8-pin SOIC package. The device combines one driver and one receiver and presents one unit load to an RS-485 bus.

An RS-485/RS-422 transceiver is a balanced data-communications interface that converts logic-level signals into differential bus signals and receives differential signals from the bus. These interface ICs belong to the transceiver hierarchy within interface integrated circuits and support robust point-to-point or multipoint communication over longer distances than conventional single-ended logic links.

The ISL8485 family is specified for 10% supply tolerance, allowing operation across the 4.5 V to 5.5 V range. Its BiCMOS architecture supports data rates up to 5 Mbps, making the ISL8485IBZ useful for industrial control links, factory automation equipment, instrumentation, and other balanced-communication systems. The balanced interface also improves noise immunity in environments containing switching equipment and industrial motors.

The ISL8485 is a half-duplex device, so the driver and receiver share the bus connection rather than operating simultaneously. System design must account for this shared use of the interface and provide the required direction-control function. The 8-SOIC outline supports compact, surface-mount PCB construction, although exact pin names and exposed-pad details should be confirmed against the manufacturer pin-description table before routing a new design.

Typical uses include RS-485 links between controllers and sensors, communication between industrial modules, and RS-422-compatible point-to-point interconnects. The 5 Mbps maximum rate supports relatively fast control and data traffic, while the differential signaling method reduces susceptibility to common-mode noise. Cable length, topology, termination, grounding, and data rate must be considered together because faster operation generally imposes more restrictive channel requirements.

For PCB implementation, place the transceiver close to the connector and route the balanced pair as a tightly coupled differential pair with continuous ground referencing. Use the termination and protection strategy appropriate for the installation, and keep switching-node currents away from the receiver path. This page also organizes lifecycle, sourcing, replacement, and application guidance around the manufacturer’s ISL8485 family information.

חלופות תחליף ישיר עבור ISL8485IBZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ISL8485IBZ (אותו גורם צורה וטביעת רגל) — שונים ב Duplex Mode, Operating Temperature Range, Product Type.

Renesas Electronics
Duplex Mode: Half duplex
Operating Temperature Range: -40°C to +85°C
Product Type: RS-485/RS-422 transceiver
השווה עם ISL8485IBZ →

ISL8485IBZ-T

✅ Drop-In
📦 8-SOIC
Identical 4.5 V to 5.5 V supply, 5 Mbps rate, RS-485/RS-422 function, 8-SOIC footprint, and terminal arrangement; ordering suffix differs by 0% in stated electrical parameters.

📋 חלופה להתייחסות (לא בקטלוג)

ISL8485IB

✅ Drop-In
Renesas Electronics
📦 8-SOIC
RS-485/RS-422 transceiver · 1/1 single half-duplex transceiver · 5 V nominal · 4.5 V to 5.5 V · 5 Mbps · BiCMOS · RS-485 and RS-422 · 1 unit load

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISL8485IB-T

✅ Drop-In
📦 8-SOIC
Same 4.5 V to 5.5 V supply, 5 Mbps data rate, half-duplex RS-485/RS-422 interface, and 8-SOIC footprint; stated electrical parameters differ by 0%.

📋 חלופה להתייחסות (לא בקטלוג)

ISL8485CBZ-T

✅ Drop-In
📦 8-SOIC
Same ISL8485 5 V, 5 Mbps, RS-485/RS-422 family and 8-SOIC package; detailed electrical comparison is unavailable, with the confirmed family rating matching by 0%.

📋 חלופה להתייחסות (לא בקטלוג)

ISL8485IBZ מפרטים

Product Type Single RS-485/RS-422 transceiver
Transceiver Configuration 1 transmitter and 1 receiver
Duplex Mode Half-duplex
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Maximum Data Rate 5 Mbps
Supported Standards RS-485 and RS-422
Process Technology BiCMOS
RS-485 Bus Loading 1 unit load
מארז 8-pin SOIC
סוג הרכבה Surface mount
טווח טמפרטורת פעולה -40 °C to +85 °C
Manufacturer Designation ISL8485IBZ

מדריך תצורת פינים של ISL8485IBZ 8-pin soic

תצורת פינים עבור ISL8485IBZ (מארזת 8-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 8-pin soic עבור ISL8485IBZ

אין נתוני פריסת פינים מפורטים עבור ISL8485IBZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ISL8485IBZ מתאים עבור 6 יישוםs: Industrial Controller Communication, Factory Sensor Networks, Point-to-Point RS-422 Links, Instrumentation and Test Equipment, Building and Automation Networks, Embedded Communication Modules.

🏭

Industrial Controller Communication

The ISL8485IBZ fits industrial controller links that require a 5 V half-duplex RS-485 interface at rates up to 5 Mbps. One transmitter and one receiver provide a compact balanced-data path between a controller and remote modules while presenting one unit load to the bus. The 4.5 V to 5.5 V operating range accommodates the supply variation expected in 5 V control systems. Designers must add direction control for transmit and receive states and validate cable length and termination against the intended data rate.

🏭

Factory Sensor Networks

The ISL8485IBZ can connect industrial sensors and actuators over a balanced RS-485 bus where noise immunity and multipoint bus loading are important. Its 5 Mbps capability supports faster control traffic than many low-rate transceivers, while one-unit-load bus loading helps limit receiver loading on shared networks. The device operates from 4.5 V to 5.5 V, making it suitable for regulated 5 V sensor gateways. Deployment still requires correct differential routing, common-mode planning, surge protection, and a cable design appropriate to the operating rate.

🌐

Point-to-Point RS-422 Links

The ISL8485IBZ supports RS-422 communication when two endpoints require balanced, high-rate signaling over a dedicated cable. Its half-duplex architecture uses one transmitter and one receiver, and its maximum 5 Mbps rate gives designers ample bandwidth for compact control or data-transfer links. Because the device is also capable of RS-485 operation, the system designer should explicitly configure termination and driver-enable behavior for the intended RS-422 topology rather than applying a generic multi-drop bus arrangement.

🔧

Instrumentation and Test Equipment

The ISL8485IBZ is useful in instrumentation that exchanges measurement and control data with a remote host over a balanced bus. The differential interface can improve noise immunity relative to a single-ended connection, while the 5 Mbps rate supports responsive command traffic. A half-duplex link requires an unambiguous direction-control sequence so that the transmitter remains disabled during reception. For laboratory or production equipment, combine the device with a defined connector pinout, cable shielding policy, grounding scheme, and protection appropriate to the installation environment.

🧩

Building and Automation Networks

The ISL8485IBZ can serve as the communications element in a building-automation controller that links floor modules, environmental sensors, and remote I/O over RS-485. The 5 V supply range supports integration with common embedded control platforms, and the 5 Mbps maximum rate allows a shared bus to handle more than basic slow sensor traffic. Installation engineers should still base cable length on the selected baud rate, use a consistent termination strategy at physical endpoints, and isolate long external cables where surge or ground-potential hazards are possible.

⚡

Embedded Communication Modules

The ISL8485IBZ suits compact embedded modules that need an industrial balanced-data port without using a larger multi-channel transceiver. Its 8-SOIC package, single-unit-load RS-485 interface, and 4.5 V to 5.5 V supply operation simplify integration into 5 V logic designs. The 5 Mbps capability allows the module to support higher-bandwidth protocols than low-speed legacy RS-485 devices. Firmware must manage half-duplex direction transitions, while the PCB should preserve the differential pair geometry and keep protection components close to the external connector.

סיכום מוצרים מומלצים

ISL8485IBZ Renesas Electronics בשימוש ב-: Industrial Controller Communication, Factory Sensor Networks, Point-to-Point RS-422 Links, Instrumentation and Test Equipment, Building and Automation Networks, Embedded Communication Modules ISL8490 Related 5 V balanced-interface family device בשימוש ב-: Industrial Controller Communication, Factory Sensor Networks, Building and Automation Networks ISL8491 Related 5 V balanced-interface family device בשימוש ב-: Industrial Controller Communication, Factory Sensor Networks, Building and Automation Networks ISL8485IBZ-T Package-compatible ordering alternative בשימוש ב-: Point-to-Point RS-422 Links, Embedded Communication Modules ISL8485IB Renesas Electronics בשימוש ב-: Instrumentation and Test Equipment ISL8485IB-T Package-compatible ordering option בשימוש ב-: Embedded Communication Modules
What is the operating voltage range of the ISL8485IBZ?
The ISL8485IBZ operates from 4.5 V to 5.5 V. According to the Renesas Electronics ISL8485, ISL8490, and ISL8491 family datasheet, the devices are BiCMOS circuits specified for 10% tolerance around a 5 V supply. This range is important because a nominal 5 V rail can vary with supply noise, temperature, and regulator tolerance. Designers should verify that every rail connected to the transceiver remains inside the specified 4.5 V to 5.5 V limits.
What is the maximum data rate of the ISL8485IBZ?
The ISL8485IBZ supports data rates up to 5 Mbps. The Renesas Electronics ISL8485 family datasheet identifies the ISL8485 as a 5 V, half-duplex RS-485/RS-422 transceiver with a 5 Mbps maximum rate. Actual sustainable communication distance depends on cable characteristics, topology, termination, common-mode conditions, and signal integrity; the 5 Mbps figure is a device capability rather than a guarantee for every cable length or bus arrangement.
Is the ISL8485IBZ full-duplex or half-duplex?
The ISL8485IBZ is a half-duplex, single-transceiver device containing one transmitter and one receiver. The Renesas Electronics ISL8485 family datasheet identifies the ISL8485 as a half-duplex RS-485/RS-422 interface. Consequently, the system must prevent the driver from transmitting while the receiver is processing a bus response. A direction-control circuit or microcontroller signal is commonly used to establish the required operating state.
Where can I download the ISL8485IBZ datasheet PDF?
The manufacturer’s ISL8485, ISL8490, and ISL8491 datasheet is available on the Renesas Electronics document page. It is the primary reference for the ISL8485IBZ supply range, electrical characteristics, RS-485/RS-422 behavior, package drawing, and recommended application information. Use the pin-description table and ordering information in that document to confirm the exact IBZ variant and its 8-SOIC terminal assignments before finalizing a PCB layout.
Where can I find the ISL8485IBZ pinout?
The ISL8485IBZ pinout is defined by the manufacturer’s ISL8485, ISL8490, and ISL8491 datasheet and its 8-pin SOIC package drawing. The device is a half-duplex RS-485/RS-422 transceiver with one transmitter and one receiver. Assign PCB tracks from the pin-description table rather than inferring terminal functions from a generic RS-485 diagram, because enable, direction-control, ground, and differential-signal assignments must follow the exact ordering information.
What are the key specifications of the ISL8485IBZ that engineers should know?
The key ISL8485IBZ specifications are a 4.5 V to 5.5 V supply range, operation up to 5 Mbps, half-duplex operation, one transmitter with one receiver, RS-485 and RS-422 support, and an 8-pin SOIC package. The Renesas Electronics family datasheet also identifies the device as BiCMOS and states that it presents one unit load to an RS-485 bus. These parameters define its suitability for compact, 5 V balanced-communication designs.
Where can I buy the ISL8485IBZ online?
The ISL8485IBZ can be requested through the “Request a Quote” form on this page. The form is the appropriate route for current commercial terms, stock confirmation, minimum order quantity, lead time, and quantity scheduling. The manufacturer lists the ISL8485 family as active, with the ISL8485IBZ-T ordering variant shown as active on the Renesas product page, so current procurement should focus on the exact ordering suffix and package required by the design.
What is the price of the ISL8485IBZ?
Use the “Request a Quote” form on this page for the current ISL8485IBZ price, stock position, and quantity schedule. Commercial terms can change with volume, package suffix, market conditions, and inventory, so a static price answer would not reliably represent the part being ordered. Include the exact MPN ISL8485IBZ and the required quantity when submitting the request.
What is the lead time for the ISL8485IBZ?
Request the current lead time through the “Request a Quote” form on this page. Lead time depends on the exact ordering suffix, production inventory, quantity, and requested delivery date. The manufacturer identifies the active ISL8485IBZ-T family listing and the ISL8485 family page as active, but production status alone does not establish a shipment date for every order quantity. Provide your required schedule so procurement can confirm the appropriate supply plan.
Is the ISL8485IBZ in stock?
Current ISL8485IBZ stock should be confirmed through the “Request a Quote” form on this page. The manufacturer identifies the ISL8485 family as active, and distributor records indicate availability for the exact device, but inventory can change by package suffix and order quantity. Include the exact MPN, target quantity, and destination country to obtain a stock-backed quotation and delivery estimate.
What is the difference between the ISL8485IBZ and the ISL8485IBZ-T?
The ISL8485IBZ and ISL8485IBZ-T are functionally compatible 8-SOIC ordering variants of the Renesas ISL8485 family, with the cross-reference information identifying consistent terminals, package, and principal performance characteristics. The key practical distinction is the ordering or packing suffix, so the replacement decision must confirm the required shipment form as well as electrical compatibility. Both variants belong to the 5 V, 5 Mbps, half-duplex RS-485/RS-422 family.
When should I choose the ISL8485IBZ over the ISL8485IB?
Choose the ISL8485IBZ when its exact ordering suffix and package are required by the target procurement specification. The available comparison identifies the ISL8485IB and ISL8485IBZ family as package- and terminal-consistent, with matching principal electrical characteristics. Selection should therefore be driven primarily by approved ordering code, required delivery form, lifecycle status, and manufacturing documentation rather than by a meaningful change in bus-interface performance.
Can the ISL8485IBZ be used in industrial RS-485 communication systems?
The ISL8485IBZ is suitable for industrial balanced-communication links when the system remains within its 4.5 V to 5.5 V supply range and uses a qualified 5 V bus implementation. Its 5 Mbps maximum rate, RS-485 and RS-422 support, and one-unit-load bus loading are useful for controller-to-sensor and controller-to-module links. The Renesas family datasheet supports the electrical and application basis, while site-specific EMC, grounding, surge protection, and cable validation remain system-level requirements.
What can replace the ISL8485IBZ without PCB changes?
The verified package- and terminal-compatible replacement is the Renesas Electronics ISL8485IBZ-T, which uses the same 8-SOIC outline and matching principal characteristics. The ISL8485IB and ISL8485IB-T are also identified as closely related 8-SOIC variants. The cross-reference search did not establish enough verified information for five distinct drop-in equivalents, so no unrelated RS-485 parts should be assumed to be pin-compatible without checking their exact pin assignments.
Is the ISL8485IBZ the same as the ISL8485IB?
The ISL8485IBZ and ISL8485IB are closely related Renesas Electronics 8-SOIC ISL8485 variants whose package, terminals, and principal performance characteristics are reported as consistent. Both support 5 V operation, RS-485/RS-422 signaling, half-duplex communication, and data rates up to 5 Mbps. Procurement and PCB documentation should still distinguish their exact ordering suffixes, because the suffix can identify the required packing or qualification configuration.

נתוני עזר הנדסיים עבור ISL8485IBZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ISL8485IBZ when a design requires a 5 V, half-duplex RS-485/RS-422 interface with operation up to 5 Mbps in an 8-SOIC package. Its one-unit-load bus presentation is useful in multipoint systems, and the 4.5 V to 5.5 V range accommodates regulated 5 V industrial and embedded supplies. The ISL8485IBZ-T is a package- and terminal-compatible alternative when its ordering suffix is approved, with matching stated electrical characteristics. The ISL8485IB and ISL8485IB-T are also closely related 8-SOIC variants for supply-chain or documentation alignment. These options are preferable to unrelated transceivers because they preserve the board footprint and established family performance. Final selection should confirm the exact ordering code, direction-control behavior, pin assignments, cable requirements, and environmental qualification.

השוואה עם חלופות

פרמטר מוצר זה ISL8485IBZ-T ISL8485IB ISL8485IB-T ISL8485CBZ-T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Maximum Data Rate 5 Mbps 5 Mbps 5 Mbps 5 Mbps 5 Mbps
Duplex Mode Half-duplex Half-duplex Half-duplex Half-duplex Half-duplex
Interface Standards RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422
Transmitter and Receiver Count 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver
RS-485 Bus Loading 1 unit load 1 unit load 1 unit load 1 unit load 1 unit load

מבדילים עיקריים

  • Matches package-compatible family alternatives across the principal operating specifications (לעומתISL8485IBZ-T)
  • Provides the same functional interface in a related ordering configuration (לעומתISL8485IB)
  • Combines compact integration with a high RS-485 data rate (לעומתISL8485IB-T)

הערות תכנון

Route the differential bus pair as a tightly coupled pair with continuous ground reference, minimize stubs, and place the transceiver close to the external connector. Keep switching-regulator and high-current paths away from the receiver input. The 5 Mbps capability provides substantial bandwidth, but faster edge rates make return-path continuity and pair symmetry increasingly important.

Manage the half-duplex direction function so the transmitter is disabled whenever the receiver must detect a response. Avoid contention from multiple active drivers and ensure firmware allows adequate turnaround time before transmitting again. Use the manufacturer pin-description table to assign the driver-enable and receiver-enable functions rather than assuming their polarity.

Define termination according to the physical topology, normally placing it at the two physical ends of a long RS-485 cable rather than at every node. Keep protection components close to the connector and select their ratings for the installation environment. Cable length and data rate must be evaluated together because the usable distance decreases as the signaling rate increases.

Bypass the 5 V supply locally and verify that it remains within the ISL8485IBZ operating range of 4.5 V to 5.5 V under transient and temperature conditions. Place the supply capacitor close to the device’s supply and ground terminals. If the transceiver shares a rail with switching circuitry, verify that ripple and ground bounce do not impair receiver operation.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance status was not stated in the manufacturer product-page snippets, family datasheet listing, or distributor records reviewed for this product.

חיפושים קשורים

ISL8485IBZ datasheet ISL8485IBZ datasheet pdf ISL8485IBZ pinout ISL8485IBZ equivalent ISL8485IBZ replacement ISL8485IBZ vs ISL8485IBZ-T ISL8485IBZ 5Mbps transceiver ISL8485IBZ 8-SOIC pinout Renesas ISL8485IBZ ISL8485IBZ price ISL8485IBZ stock ISL8485IBZ RS-485 application circuit

רכיבים ומונחים קשורים

Renesas Electronics ISL8485IBZ ISL8485IBZ-T ISL8485IB ISL8485IB-T ISL8490 ISL8491 RS-485 RS-422 half-duplex transceiver balanced differential signaling interface IC BiCMOS 5 Mbps data rate 4.5 V to 5.5 V supply one unit load 8-SOIC surface mount industrial automation factory sensor network direction control EMI differential pair termination
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר