ISL8485IBZ - 5V 5Mbps RS-485/422 Transceiver | Renesas
MPN: ISL8485IBZ ✓ فعالISL8485IBZ نمای کلی
An RS-485/RS-422 transceiver is a balanced data-communications interface that converts logic-level signals into differential bus signals and receives differential signals from the bus. These interface ICs belong to the transceiver hierarchy within interface integrated circuits and support robust point-to-point or multipoint communication over longer distances than conventional single-ended logic links.
The ISL8485 family is specified for 10% supply tolerance, allowing operation across the 4.5 V to 5.5 V range. Its BiCMOS architecture supports data rates up to 5 Mbps, making the ISL8485IBZ useful for industrial control links, factory automation equipment, instrumentation, and other balanced-communication systems. The balanced interface also improves noise immunity in environments containing switching equipment and industrial motors.
The ISL8485 is a half-duplex device, so the driver and receiver share the bus connection rather than operating simultaneously. System design must account for this shared use of the interface and provide the required direction-control function. The 8-SOIC outline supports compact, surface-mount PCB construction, although exact pin names and exposed-pad details should be confirmed against the manufacturer pin-description table before routing a new design.
Typical uses include RS-485 links between controllers and sensors, communication between industrial modules, and RS-422-compatible point-to-point interconnects. The 5 Mbps maximum rate supports relatively fast control and data traffic, while the differential signaling method reduces susceptibility to common-mode noise. Cable length, topology, termination, grounding, and data rate must be considered together because faster operation generally imposes more restrictive channel requirements.
For PCB implementation, place the transceiver close to the connector and route the balanced pair as a tightly coupled differential pair with continuous ground referencing. Use the termination and protection strategy appropriate for the installation, and keep switching-node currents away from the receiver path. This page also organizes lifecycle, sourcing, replacement, and application guidance around the manufacturer’s ISL8485 family information.
جایگزینهای drop-in برای ISL8485IBZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ISL8485IBZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Duplex Mode, Operating Temperature Range, Product Type.
ISL8485IBZ-T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ISL8485IB
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ISL8485IB-T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ISL8485CBZ-T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ISL8485IBZ مشخصات
| Product Type | Single RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 transmitter and 1 receiver |
| Duplex Mode | Half-duplex |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Maximum Data Rate | 5 Mbps |
| Supported Standards | RS-485 and RS-422 |
| Process Technology | BiCMOS |
| RS-485 Bus Loading | 1 unit load |
| بستهبندی | 8-pin SOIC |
| نوع نصب | Surface mount |
| محدوده دمای کاری | -40 °C to +85 °C |
| Manufacturer Designation | ISL8485IBZ |
راهنمای پیکربندی پین ISL8485IBZ 8-pin soic
پیکربندی پین برای ISL8485IBZ (پکیج 8-pin soic). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ISL8485IBZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ISL8485IBZ مناسب است برای 6 کاربردs: Industrial Controller Communication, Factory Sensor Networks, Point-to-Point RS-422 Links, Instrumentation and Test Equipment, Building and Automation Networks, Embedded Communication Modules.
Industrial Controller Communication
The ISL8485IBZ fits industrial controller links that require a 5 V half-duplex RS-485 interface at rates up to 5 Mbps. One transmitter and one receiver provide a compact balanced-data path between a controller and remote modules while presenting one unit load to the bus. The 4.5 V to 5.5 V operating range accommodates the supply variation expected in 5 V control systems. Designers must add direction control for transmit and receive states and validate cable length and termination against the intended data rate.
پیشنهادی
Factory Sensor Networks
The ISL8485IBZ can connect industrial sensors and actuators over a balanced RS-485 bus where noise immunity and multipoint bus loading are important. Its 5 Mbps capability supports faster control traffic than many low-rate transceivers, while one-unit-load bus loading helps limit receiver loading on shared networks. The device operates from 4.5 V to 5.5 V, making it suitable for regulated 5 V sensor gateways. Deployment still requires correct differential routing, common-mode planning, surge protection, and a cable design appropriate to the operating rate.
پیشنهادی
Point-to-Point RS-422 Links
The ISL8485IBZ supports RS-422 communication when two endpoints require balanced, high-rate signaling over a dedicated cable. Its half-duplex architecture uses one transmitter and one receiver, and its maximum 5 Mbps rate gives designers ample bandwidth for compact control or data-transfer links. Because the device is also capable of RS-485 operation, the system designer should explicitly configure termination and driver-enable behavior for the intended RS-422 topology rather than applying a generic multi-drop bus arrangement.
پیشنهادی
Instrumentation and Test Equipment
The ISL8485IBZ is useful in instrumentation that exchanges measurement and control data with a remote host over a balanced bus. The differential interface can improve noise immunity relative to a single-ended connection, while the 5 Mbps rate supports responsive command traffic. A half-duplex link requires an unambiguous direction-control sequence so that the transmitter remains disabled during reception. For laboratory or production equipment, combine the device with a defined connector pinout, cable shielding policy, grounding scheme, and protection appropriate to the installation environment.
پیشنهادی
Building and Automation Networks
The ISL8485IBZ can serve as the communications element in a building-automation controller that links floor modules, environmental sensors, and remote I/O over RS-485. The 5 V supply range supports integration with common embedded control platforms, and the 5 Mbps maximum rate allows a shared bus to handle more than basic slow sensor traffic. Installation engineers should still base cable length on the selected baud rate, use a consistent termination strategy at physical endpoints, and isolate long external cables where surge or ground-potential hazards are possible.
پیشنهادی
Embedded Communication Modules
The ISL8485IBZ suits compact embedded modules that need an industrial balanced-data port without using a larger multi-channel transceiver. Its 8-SOIC package, single-unit-load RS-485 interface, and 4.5 V to 5.5 V supply operation simplify integration into 5 V logic designs. The 5 Mbps capability allows the module to support higher-bandwidth protocols than low-speed legacy RS-485 devices. Firmware must manage half-duplex direction transitions, while the PCB should preserve the differential pair geometry and keep protection components close to the external connector.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ISL8485IBZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ISL8485IBZ-T | ISL8485IB | ISL8485IB-T | ISL8485CBZ-T |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 5 Mbps | 5 Mbps | 5 Mbps | 5 Mbps | 5 Mbps |
| Duplex Mode | Half-duplex | Half-duplex | Half-duplex | Half-duplex | Half-duplex |
| Interface Standards | RS-485 and RS-422 | RS-485 and RS-422 | RS-485 and RS-422 | RS-485 and RS-422 | RS-485 and RS-422 |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver |
| RS-485 Bus Loading | 1 unit load | 1 unit load | 1 unit load | 1 unit load | 1 unit load |
تفاوتهای کلیدی
- Matches package-compatible family alternatives across the principal operating specifications (در مقابلISL8485IBZ-T)
- Provides the same functional interface in a related ordering configuration (در مقابلISL8485IB)
- Combines compact integration with a high RS-485 data rate (در مقابلISL8485IB-T)
یادداشتهای طراحی
Route the differential bus pair as a tightly coupled pair with continuous ground reference, minimize stubs, and place the transceiver close to the external connector. Keep switching-regulator and high-current paths away from the receiver input. The 5 Mbps capability provides substantial bandwidth, but faster edge rates make return-path continuity and pair symmetry increasingly important.
Manage the half-duplex direction function so the transmitter is disabled whenever the receiver must detect a response. Avoid contention from multiple active drivers and ensure firmware allows adequate turnaround time before transmitting again. Use the manufacturer pin-description table to assign the driver-enable and receiver-enable functions rather than assuming their polarity.
Define termination according to the physical topology, normally placing it at the two physical ends of a long RS-485 cable rather than at every node. Keep protection components close to the connector and select their ratings for the installation environment. Cable length and data rate must be evaluated together because the usable distance decreases as the signaling rate increases.
Bypass the 5 V supply locally and verify that it remains within the ISL8485IBZ operating range of 4.5 V to 5.5 V under transient and temperature conditions. Place the supply capacitor close to the device’s supply and ground terminals. If the transceiver shares a rail with switching circuitry, verify that ripple and ground bounce do not impair receiver operation.
اطلاعات انطباق
Compliance status was not stated in the manufacturer product-page snippets, family datasheet listing, or distributor records reviewed for this product.