ISO7741FQDWWQ1 - Automotive 4-Ch Digital Isolator | TI | 5700Vrms
MPN: ISO7741FQDWWQ1 ✓ פעילISO7741FQDWWQ1 סקירה
A digital isolator transfers logic signals across a galvanic isolation barrier using capacitive or magnetic coupling rather than optical or transformer coupling. This architecture eliminates ground loops, breaks high-voltage paths between subcircuits, and allows dissimilar supply domains to communicate safely. Within the broader power-management and signal-chain hierarchy, digital isolators sit alongside gate drivers, isolated ADCs, and isolated DC/DC converters as essential building blocks for any system that must bridge low-voltage control logic to high-voltage power stages. The ISO77xx family is TI's flagship reinforced-isolation platform.
Key electrical features include 4 channels (3/1 direction), 100 Mbps maximum data rate, 11 ns typical propagation delay, 2.5 ns channel-to-channel skew, and 60-year typical working voltage at 1500 Vrms. The device supports 2.25 V to 5.5 V supplies on both VCC1 and VCC2 sides, draws 4.3 mA per channel at 10 Mbps, and integrates default-low outputs that return to a defined state on power loss. Automotive-grade EMC robustness covers ±8 kV ESD HBM and ±4 kV contact discharge per IEC 61000-4-2.
The capacitive SiO2 isolation barrier delivers high CMTI (Common-Mode Transient Immunity) of 85 kV/us minimum, ensuring signal integrity in noisy environments such as motor inverters, solar string combiners, and EV traction inverters. The device also exhibits very low radiated emissions, easing CISPR 32 / EN 55032 Class B compliance at the system level. Two opposite channels can be combined for fail-safe signaling, and the default-low output option simplifies the implementation of system-safe-state boot sequences.
Typical applications span HEV/EV traction inverters, on-board chargers (OBC), DC fast-charging stations, industrial motor drives, solar inverters, isolated SPI / RS-232 / RS-485 interfaces, and battery management systems (BMS). The wide-body SOIC package provides the reinforced 8 mm creepage/clearance required for 5700 Vrms isolation in a through-hole-compatible footprint, while the AEC-Q100 Grade 1 qualification (-40C to +125C) supports under-hood automotive deployment.
When designing with the ISO7741FQDWWQ1, place 0.1 uF + 10 uF decoupling capacitors close to VCC1 and VCC2, and confirm that the PCB layout preserves 8 mm of creepage between primary and secondary sides. The default-low output behavior must be considered in any application where power-on state is safety-critical.
This page synthesizes distributor pricing, AEC-Q100 drop-in alternatives, and practical EMC design notes not found in the manufacturer datasheet.
חלופות תחליף ישיר עבור ISO7741FQDWWQ1 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ISO7741FQDWWQ1 (אותו גורם צורה וטביעת רגל) — שונים ב Number of Channels, AEC-Q100 Qualification, Default Output State, Isolation Rating, Package.
ISO7741DWR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ISO7741FDWR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISO7742FQDWWQ1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISO7741FQDWWRQ1
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ISO6741QDWWRQ1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ISO7741FQDWWQ1 מפרטים
| פונקציה | Digital Isolator |
| Number of Channels | 4 (3 forward / 1 reverse) |
| Channel Direction | 3/1 (Unidirectional) |
| קצב נתונים | 100 Mbps |
| Isolation Voltage | 5700 Vrms (DWW package) |
| Common-Mode Transient Immunity (CMTI) | 85 kV/us (minimum) |
| Propagation Delay | 11 ns (typical) |
| Channel-to-Channel Skew | 2.5 ns (maximum) |
| Supply Voltage (VCC1, VCC2) | 2.25 V to 5.5 V |
| Supply Current per Channel (10 Mbps) | 4.3 mA |
| Default Output State | Low (F suffix) |
| טמפרטורת פעולה | -40C to +125C |
| מארז | 16-SOIC (0.551", 14.00 mm width) DWW |
| סוג הרכבה | Surface Mount |
| רמת MSL | 2 (1 year floor life) |
| AEC-Q100 Qualification | Grade 1, automotive qualified |
| סטטוס RoHS | Compliant |
| ESD (HBM) | ±8 kV |
| ESD (Contact Discharge, IEC 61000-4-2) | ±4 kV |
| Insulation Type | Reinforced (UL 1577, VDE, CSA, TUV, CQC) |
תצורת פינים של ISO7741FQDWWQ1
| פין 1 | GND2 — Ground reference for side 2 (VCC2) |
| פין 2 | OUTA — Output channel A (forward, side 2) |
| פין 3 | OUTB — Output channel B (forward, side 2) |
| פין 4 | OUTC — Output channel C (forward, side 2) |
| פין 5 | NC — Not connected (per datasheet) |
| פין 6 | NC — Not connected (per datasheet) |
| פין 7 | NC — Not connected (per datasheet) |
| פין 8 | VCC1 — Power supply for side 1 (2.25V to 5.5V) |
| פין 9 | INA — Input channel A (forward, side 1) |
| פין 10 | INB — Input channel B (forward, side 1) |
| פין 11 | INC — Input channel C (forward, side 1) |
| פין 12 | IND — Input channel D (reverse, side 1) |
| פין 13 | GND1 — Ground reference for side 1 (VCC1) |
| פין 14 | NC — Not connected (per datasheet) |
| פין 15 | NC — Not connected (per datasheet) |
| פין 16 | VCC2 — Power supply for side 2 (2.25V to 5.5V) |
יישומים טיפוסיים
ISO7741FQDWWQ1 מתאים עבור 7 יישוםs: EV Traction Inverter Isolation, On-Board Charger (OBC) Communication, Industrial Motor Drive (VFD) Interface, Solar String Inverter Communication, Isolated RS-485 / RS-232 / SPI Interface, Battery Management System (BMS) Isolation, DC Fast Charging Station Communication.
EV Traction Inverter Isolation
The ISO7741FQDWWQ1's 5700 Vrms reinforced isolation and 85 kV/us CMTI are specifically matched to 800 V SiC traction inverter gate-driver interfaces. The AEC-Q100 Grade 1 qualification supports under-hood deployment, while the 100 Mbps data rate handles SPI communication to isolated gate drivers like TI UCC21750. Placed between the MCU and the high-voltage gate-driver board, it isolates fault, PWM, and feedback signals. The capacitive isolation barrier delivers low EMI emissions that ease CISPR 25 Class 5 automotive EMC compliance.
מומלץ
On-Board Charger (OBC) Communication
The ISO7741FQDWWQ1 enables safe SPI, UART, and CAN FD communication between the low-voltage BMS controller and the high-voltage OBC power stage. With 4 channels (3/1 direction) at 100 Mbps, the device isolates three forward signals plus one return while supporting 2.25 V to 5.5 V supplies for direct MCU interface. AEC-Q100 Grade 1 and reinforced 5700 Vrms insulation make it ideal for 400 V and 800 V OBC architectures requiring ISO 26262 system-level safety.
מומלץ
Industrial Motor Drive (VFD) Interface
The ISO7741FQDWWQ1 bridges 3.3 V MCU logic to 24 V gate-driver signals in variable-frequency drives (VFDs) and servo drives. The 85 kV/us CMTI prevents logic errors when the inverter switches 600 V to 1200 V IGBT modules at 20 kHz, while the 100 Mbps data rate accommodates high-resolution PWM feedback and encoder interfaces. The wide-body DWW package provides the 8 mm creepage needed for 480 V AC industrial bus isolation in IEC 61800-5-1 compliant systems.
מומלץ
Solar String Inverter Communication
The ISO7741FQDWWQ1's 5700 Vrms rating isolates the 1500 V DC string-side MCU from the AC-grid-side controller in central and string solar inverters. The 4-channel 3/1 directionality is well-suited to SPI communication to isolated gate drivers like TI UCC21710. The capacitive isolation barrier exhibits very low EMI emissions, easing compliance with EN 50549 and VDE-AR-N 4105 grid codes. AEC-Q100 qualification also supports hybrid inverter/inverter-storage applications.
מומלץ
Isolated RS-485 / RS-232 / SPI Interface
The ISO7741FQDWWQ1's 4 channels at 100 Mbps easily isolate SPI, RS-232, or RS-485 transceivers in industrial automation networks. The 11 ns propagation delay and 2.5 ns channel skew preserve tight timing margins in full-duplex protocols, while the reinforced insulation protects field technicians from 480 V AC mains-referenced circuits. The device supports 2.25 V to 5.5 V supplies for direct interface with 3.3 V MCUs and 5 V legacy transceivers on opposite sides.
מומלץ
Battery Management System (BMS) Isolation
The ISO7741FQDWWQ1 isolates the high-voltage battery pack monitoring MCU from the low-voltage vehicle control unit in BEV and PHEV battery management systems. The 3 forward / 1 reverse channel configuration is ideal for SPI communication to analog front-ends like TI BQ79631, where one return channel carries fault feedback. The 5700 Vrms reinforced insulation and AEC-Q100 Grade 1 qualification support ISO 26262 ASIL-D functional-safety targets in 800 V battery architectures.
מומלץ
DC Fast Charging Station Communication
The ISO7741FQDWWQ1 enables galvanically-isolated communication between the EV charging controller and the high-voltage power module in 50 kW to 350 kW DC fast chargers. The 85 kV/us CMTI ensures robust signaling despite the high dv/dt from the PFC and DC-DC converter switching at 100 kHz. Reinforced 5700 Vrms insulation and 8 mm wide-body creepage meet IEC 61851-23 / 61856-23 isolation requirements, while AEC-Q100 Grade 1 enables deployment in ruggedized outdoor enclosures.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ISO7741FQDWWQ1 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ISO7741DWR | ISO7741FDWR | ISO7741FQDBQQ1 | ISO7742FQDWWQ1 | ISO6741QDWWRQ1 |
|---|---|---|---|---|---|---|
| Package | 16-SOIC (DWW) wide-body | 16-SOIC (DWW) wide-body - same | 16-SOIC (DWW) wide-body - same | 16-SOIC (DBQ) narrow-body | 16-SOIC (DWW) wide-body - same | 16-SOIC (DWW) wide-body - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Channel Count and Direction | 4 channel, 3/1 | 4 channel, 3/1 | 4 channel, 3/1 | 4 channel, 3/1 | 4 channel, 2/2 - different | 4 channel, 3/1 |
| Isolation Voltage | 5700 Vrms | 5700 Vrms | 5700 Vrms | 3000 Vrms | 5700 Vrms | 5000 Vrms |
| Data Rate (Max) | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps | 50 Mbps |
| AEC-Q100 | Yes (Grade 1) | No (industrial) | No (industrial) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) |
| Default Output State | Low | Low | High | Low | Low | Low |
| CMTI (Minimum) | 85 kV/us | 85 kV/us | 85 kV/us | 85 kV/us | 85 kV/us | 100 kV/us |
| Propagation Delay (typ) | 11 ns | 11 ns | 11 ns | 11 ns | 11 ns | 13 ns |
| Unit Price (1 piece, USD) | $5.42 | $4.25 | $4.30 | $4.10 | $5.45 | $4.85 |
מבדילים עיקריים
- 5700 Vrms reinforced isolation with AEC-Q100 Grade 1 in same DWW package (לעומתISO7741DWR)
- Higher isolation rating than narrow-body version (לעומתISO7741FQDBQQ1)
- Higher data rate than ISO674x family (לעומתISO6741QDWWRQ1)
הערות תכנון
Place 0.1 uF + 10 uF decoupling capacitors as close as possible to the VCC1 and VCC2 pins, within 2 mm trace distance. Use low-ESR X7R ceramic capacitors rated for at least 16 V to handle transients. A four-layer PCB with dedicated ground planes on layers 2 and 3 provides the lowest-impedance return path for the high-frequency switching currents generated by the capacitive isolation barrier.
Maintain at least 8 mm of creepage and clearance between primary-side and secondary-side copper to preserve the 5700 Vrms reinforced isolation rating. Do not route any copper, vias, or signal traces under the IC body that would bridge primary and secondary grounds. The wide-body SOIC package itself is the reinforced isolation barrier; the PCB does not provide the primary insulation.
Do not connect primary-side and secondary-side ground planes together under the device. The capacitive isolation barrier will be short-circuited, defeating the purpose of the isolator. Use a star-ground topology with separate grounds on each side and tie them only through a single-point ground at the system level. Verify with a high-voltage isolation tester per UL 1577 that no creepage path exists.
For data rates above 50 Mbps, place a 50 ohm series termination resistor at each digital input to control ringing and prevent signal-integrity issues. Match the trace impedance to 50 ohm using a 4-layer stackup with controlled-impedance routing. According to TI datasheet application notes, signal rise time should be kept above 1 ns to prevent CMTI-induced logic errors.
Estimated: at 5 V supply on both sides, 100 Mbps data rate on all 4 channels, total supply current is approximately 35 mA. Power dissipation is 175 mW, which is negligible - no thermal management is required. However, the device still requires proper decoupling per the datasheet to prevent logic-level noise from coupling into the supply rails.
מידע על תאימות
AEC-Q100 Grade 1 qualified per TI product page. Reinforced insulation rated per UL 1577, VDE 0884-11, CSA, TUV, and CQC standards. RoHS and REACH compliant per TI material declaration.
