Texas Instruments

LM2904LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments

MPN: LM2904LVIPWR ✓ פעיל
5.5 V Vdss TSSOP (PW) Package
כמות הזמנה מינימלית: 1 |

LM2904LVIPWR סקירה

Texas Instruments LM2904LVIPWR is a dual, general-purpose operational amplifier with a 5.5 V maximum supply rating, 1 MHz gain-bandwidth product, and 3 mV input offset voltage in an 8-pin TSSOP (PW) package. The two amplifiers are intended for low-voltage signal-conditioning and analog-processing systems operating from -40°C to +125°C.

An operational amplifier is an active analog component that amplifies the voltage difference between its non-inverting and inverting inputs. The LM2904LV belongs to the LM290xLV low-voltage operational-amplifier family, combining two amplifier channels in one package. This makes the device suitable for applications such as signal buffering, active filtering, differential amplification, instrumentation, and low-level analog conditioning.

The headline specifications are a 1 MHz gain-bandwidth product, a 3 mV offset voltage, and a 5.5 V maximum supply rating. These characteristics are useful for moderate-bandwidth, general-purpose analog designs where compactness and dual-channel functionality matter more than high-speed precision performance. The operating-temperature range of -40°C to +125°C supports use across industrial and extended-temperature equipment.

The LM2904LV uses conventional internal compensation and is configured as a dual operational amplifier. Its 1 MHz bandwidth supports general-purpose closed-loop signal work, while the two channels can implement independent amplifier functions or work together in differential, summing, and feedback configurations. Design calculations should use the manufacturer datasheet for gain-bandwidth behavior, output swing, input common-mode limits, and output-drive capability.

Typical uses include sensor-signal conditioning, audio preamplification, industrial control interfaces, low-frequency active filters, and general analog buffers. In dual-rail or single-supply systems, the circuit designer must verify the allowable input and output common-mode ranges against the actual supply voltage. Output loading and feedback-loop stability also require evaluation when driving capacitive or long external cables.

Use the manufacturer pin-description table when assigning PCB tracks and verify the exposed-pad requirements and recommended land pattern for the TSSOP package. Place input and feedback components close to the relevant amplifier pins, maintain short ground-return paths, and provide local supply bypassing to reduce noise and prevent feedback from unrelated circuitry.

This product page combines the key manufacturer specifications, ordering and package information, application guidance, and replacement-selection considerations in one engineering-focused reference. The comparison and design notes are intended to accelerate schematic selection, footprint verification, and first-board bring-up for dual low-voltage operational-amplifier designs.

חלופות תחליף ישיר עבור LM2904LVIPWR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM2904LVIPWR (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Gain-Bandwidth Product, Maximum Supply Voltage, Operating Temperature Range, Package Type.

Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Gain-Bandwidth Product: 700 kHz
Maximum Supply Voltage: 30 V
השווה עם LM2904LVIPWR →

LM2904VQPWR

✅ Drop-In
Texas Instruments
📦 TSSOP-8 (PW)
Dual general-purpose operational amplifier · 2 channels · 30 V · 700 kHz · -40 °C to 125 °C · Single supply or split supply · 8-pin TSSOP (PW) · TSSOP

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2904LVIPWR דירוגים מרביים ומאפיינים חשמליים

Number of Channels 2 channels
Amplifier Type General-purpose operational amplifier
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 1 MHz
Input Offset Voltage 3 mV
טווח טמפרטורת פעולה -40°C to +125°C
Package Type TSSOP (PW)
Package Pin Count 8 pins
סוג הרכבה Surface mount
סטטוס RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

מדריך תצורת פינים של LM2904LVIPWR 8 pins

תצורת פינים עבור LM2904LVIPWR (מארזת 8 pins). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8 pins עבור LM2904LVIPWR

אין נתוני פריסת פינים מפורטים עבור LM2904LVIPWR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LM2904LVIPWR מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Audio Preamplification, Active Low-Pass Filters, Low-Frequency Data Acquisition, Battery-Powered Portable Instruments, Power Supply Control and Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM2904LVIPWR fits general-purpose industrial sensor conditioning because its dual configuration provides two amplifiers in one 8-pin TSSOP package, while the 1 MHz gain-bandwidth product supports signals well beyond basic DC scaling. A channel can provide gain followed by an active low-pass or differential stage, reducing board area when the source is a resistive bridge, potentiometer, or slow industrial transducer. Its -40°C to +125°C rating supports extended-temperature equipment. The designer should confirm the sensor’s excitation level, output common-mode voltage, required noise performance, and the amplifier’s input and output ranges before finalizing the circuit.

🎧

Audio Preamplification

The LM2904LVIPWR can be used for modest-bandwidth audio preamplification when the design operates from a supply no higher than 5.5 V and does not require rail-to-rail output swing. Its 1 MHz gain-bandwidth product provides more bandwidth than typical low-frequency audio paths generally require, while two channels can support stereo or a mono input plus an active filter. The 3 mV offset rating is noncritical for many audio stages but matters in quiet, high-gain designs. Confirm the input common-mode range, output swing, slew rate, and capacitive-load stability before choosing gain and filter resistors.

🔧

Active Low-Pass Filters

The LM2904LVIPWR is appropriate for first-order and moderate-order active filters operating within its 1 MHz bandwidth. Two independent channels can implement a two-pole filter using the familiar inverting topology, or the channels can form a buffered measurement chain. The device’s 3 mV input offset should be included in the output-error budget, while supply voltage determines the available signal range. Use stable resistor values, check each stage’s closed-loop gain against the gain-bandwidth limit, and verify that the intended operating frequency does not produce excessive phase error.

📟

Low-Frequency Data Acquisition

The LM2904LVIPWR can condition low-bandwidth measurement signals in a compact data-acquisition front end. One channel may amplify a transducer output and the other may buffer a reference or provide additional gain. Its 1 MHz gain-bandwidth product is substantially higher than the bandwidth normally needed for slow sensors, while the -40°C to +125°C range supports industrial environments. The principal limits are the 3 mV offset, input bias behavior, common-mode range, and output swing. Confirm those parameters against the sensor output and ADC input range before using the device for high-resolution measurements.

📱

Battery-Powered Portable Instruments

The LM2904LVIPWR is useful in battery-powered portable instruments when the signal chain operates at low voltage and the 5.5 V maximum supply rating provides adequate headroom. Its dual-channel TSSOP package reduces board footprint, while the 1 MHz bandwidth permits signal conditioning beyond DC and very-low-frequency requirements. Designers should verify current consumption for the complete operating mode, verify rail-to-rail behavior at the selected supply, and ensure the output does not exceed the downstream ADC or display input range. Local bypass capacitance and short analog routing are important for preserving low-noise operation in compact systems.

⚡

Power Supply Control and Monitoring

The LM2904LVIPWR can amplify and buffer low-level control or monitoring signals in a low-voltage power-management module. A channel may sense a scaled feedback node, compare it with a reference through external circuitry, or buffer an error signal to a controller. The 1 MHz bandwidth is adequate for many control loops operating well below that frequency, and the -40°C to +125°C rating supports industrial equipment. Verify the output swing at the selected supply, the offset contribution at high loop gain, and stability with the controller input capacitance before deployment.

What is the LM2904LVIPWR?
The LM2904LVIPWR is a Texas Instruments dual general-purpose operational amplifier rated for a maximum supply voltage of 5.5 V, with a 1 MHz gain-bandwidth product and 3 mV input offset voltage. According to the TI LM2904LV product page, the device is packaged in an 8-pin TSSOP and is rated for -40°C to +125°C operation, making it suitable for low-voltage analog signal conditioning.
What are the key specifications of LM2904LVIPWR that engineers should know?
The key LM2904LVIPWR specifications are two amplifier channels, a 5.5 V maximum supply rating, 1 MHz gain-bandwidth product, 3 mV input offset voltage, and an operating-temperature range of -40°C to +125°C. Texas Instruments identifies the device as a general-purpose dual operational amplifier in an 8-pin TSSOP package. Check the full datasheet for input range, output swing, bias current, and stability information.
Is LM2904LVIPWR suitable for 5 V industrial control circuits?
The LM2904LVIPWR is suitable for many 5 V industrial control circuits because its maximum supply rating is 5.5 V and its temperature range extends from -40°C to +125°C. According to the TI product page, the device provides two channels and a 1 MHz gain-bandwidth product. Verify input common-mode limits, output swing, capacitive-load behavior, and supply tolerances in the manufacturer datasheet.
Where can I download the LM2904LVIPWR datasheet PDF?
The official LM2904LVIPWR documentation starts with the Texas Instruments LM2904LV product page at https://www.ti.com/product/LM2904LV. From the documentation section, select the LM290xLV datasheet and use the ordering-information section to identify LM2904LVIPWR and its PW package ordering code. The family datasheet contains the authoritative electrical characteristics, pinout, and application guidance.
Where can I find the LM2904LVIPWR pinout?
The LM2904LVIPWR pinout is located in the pin-configuration section of the Texas Instruments LM290xLV datasheet. The device uses the TI PW package designation and contains 8 pins, with two operational-amplifier channels and power connections. Use that table rather than a generic TSSOP drawing because pin assignment must be confirmed for the exact LM2904LV family device.
What is the difference between LM2904LVIPWR and LM2904?
The LM2904LVIPWR is the low-voltage LM2904LV configuration, rated for a 5.5 V maximum supply and specified at 1 MHz gain-bandwidth with 3 mV offset voltage. The standard LM2904 is rated for a 26 V maximum supply with 700 kHz bandwidth. According to TI product pages, LM2904LVIPWR is the surface-mount TSSOP version of the lower-voltage family.
Can LM2904LVIPWR be used as a buffer?
The LM2904LVIPWR can be used as a voltage follower when configured for unity-gain operation. Its 1 MHz gain-bandwidth product supports general-purpose low-frequency buffering, while the 3 mV input offset specification must be considered in precision measurements. Verify input and output voltage limits against the actual 5.5 V-or-lower supply before adding the buffer.
What can replace LM2904LVIPWR?
A valid replacement for LM2904LVIPWR must use the same 8-pin TSSOP footprint, match the pin assignment, and meet the circuit’s supply-voltage, bandwidth, offset, input-range, output-swing, and temperature requirements. The manufacturer product page identifies LM2904LVIPWR specifically as the PW-package member, but it does not establish other manufacturers’ parts as drop-in equivalents. Verify each candidate against its own datasheet before substitution.
Is LM2904LVIPWR pin compatible with an LM358?
LM2904LVIPWR and LM358 devices may share a common 8-pin amplifier arrangement in some packages, but package-body dimensions and electrical limits can differ. The LM2904LVIPWR is specified in the PW 8-pin TSSOP package, while alternative LM358 ordering codes may use SOIC or other packages. Do not treat them as drop-in without comparing land patterns, pin names, supply range, input range, output swing, and stability.
Where can I buy LM2904LVIPWR and what is its price?
Use the Request a Quote form on this page to request LM2904LVIPWR pricing, stock confirmation, and current lead time. The exact commercial terms can change with quantity, packaging, and market conditions, so a current quotation is more useful than a static price. Specify the LM2904LVIPWR MPN, required quantity, and preferred delivery destination when submitting the request.
What is the lead time for LM2904LVIPWR?
Request the current LM2904LVIPWR lead time through the Request a Quote form on this page. Lead time depends on the confirmed order quantity, manufacturing availability, and shipment destination, and it should not be inferred from a distributor listing. Include your required quantity and target delivery date so the supplier can confirm the most relevant schedule.
Is LM2904LVIPWR in stock?
Submit the LM2904LVIPWR MPN and required quantity through the Request a Quote form on this page to obtain a current stock confirmation. Inventory status can vary by quantity, package, and regional logistics, so it should be checked for the exact ordering code. The confirmed manufacturing status is Texas Instruments’ LM2904LV product family listing.
When should I choose LM2904LVIPWR instead of a higher-precision op amp?
Choose LM2904LVIPWR when a compact dual general-purpose amplifier, a 5.5 V maximum supply rating, and a 1 MHz bandwidth are sufficient for the design. Its 3 mV input offset may be too large for precision bridge or current-sense measurements, so a lower-offset amplifier can be preferable there. The dual TSSOP implementation helps conserve board area when two channels are required.
Is LM2904LVIPWR suitable for active filters and sensor interfaces?
The LM2904LVIPWR is suitable for many active-filter and sensor-interface circuits that operate below its 1 MHz bandwidth and within its input and output limits. Texas Instruments describes it as a 5.5 V, 1 MHz dual operational amplifier with 3 mV offset voltage. Confirm noise, bias current, common-mode range, and output drive from the datasheet for each specific sensor.
How should LM2904LVIPWR be bypassed on a PCB?
Place the LM2904LVIPWR supply bypass capacitor close to the power pins and connect it directly to the device ground reference. Keep input and feedback traces short, route return currents without loops through analog signals, and avoid placing high-current paths beside the amplifier inputs. The TI datasheet and application guidance should be used to select the final capacitor values and board layout.

נתוני עזר הנדסיים עבור LM2904LVIPWR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LM2904LVIPWR when the design needs two general-purpose amplifier channels, operates from a low-voltage supply rated no higher than 5.5 V, and needs signal bandwidth below the 1 MHz gain-bandwidth limit. Its TSSOP package is useful when board area is important, and its -40°C to +125°C rating suits extended-temperature industrial equipment. It is less attractive for precision bridge measurement, low-offset current sensing, rail-to-rail battery operation, or capacitive loads unless the complete datasheet specifications demonstrate adequate performance. The standard LM2904 is preferable when the circuit requires a substantially higher supply-voltage rating. A different dual amplifier should replace this device only after its package, pinout, common-mode range, output swing, bandwidth, offset, slew rate, stability, and temperature limits have all been checked.

השוואה עם חלופות

פרמטר מוצר זה
Package 8-pin TSSOP (PW)
Brand Texas Instruments
Number of Channels 2 channels
Amplifier Type General-purpose operational amplifier
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 1 MHz
Input Offset Voltage 3 mV
Operating Temperature Range -40°C to +125°C
Package Pin Count 8 pins
Mounting Type Surface mount

מבדילים עיקריים

  • Dual-channel integration in an 8-pin TSSOP package (לעומתSingle-channel operational amplifiers)
  • Low-voltage family operation (לעומתStandard 26 V LM2904)
  • General-purpose bandwidth (לעומתPrecision and high-speed amplifier families)

הערות תכנון

Place the supply bypass capacitor immediately adjacent to the LM2904LVIPWR power and ground pins, with the shortest practical connection to the device ground. Keep the two amplifier inputs, feedback components, and output routes away from switching nodes and high-current return paths. The PW package requires use of TI’s recommended land pattern and adequate solder-paste coverage at the fine-pitch leads.

Do not assume that the 5.5 V maximum supply rating means every input or output can reach the positive rail. Before finalizing a circuit, check the LM2904LV datasheet for input common-mode limits and output swing under the selected load. Also include the 3 mV input offset in precision calculations and verify stability when driving capacitive loads or driving long cables.

Use separate analog and digital return-current paths where practical, and join them according to the board’s ground strategy. Avoid routing the two channels through shared impedance when the channels carry substantially different currents or frequencies. Place feedback resistors close to their corresponding amplifier pins so parasitic capacitance does not alter the intended closed-loop response.

Size the analog supply for the operational-amplifier output current, local bypass network, and connected load rather than treating the 5.5 V rating as an output-current specification. Confirm output-drive and output-swing limits from the manufacturer datasheet. If the amplifier drives a load containing capacitance, verify stability and slew-rate requirements for the intended waveform.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The LM2904LV family product information identifies the device and package, but no specific environmental or material-compliance declarations are included here.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LM2904LVIPWR datasheet LM2904LVIPWR pinout LM2904LVIPWR datasheet pdf LM2904LVIPWR equivalent LM2904LVIPWR replacement LM2904LVIPWR price LM2904LVIPWR stock Texas Instruments LM2904LVIPWR LM2904LVIPWR 5.5V 1MHz LM2904LVIPWR TSSOP-8 LM2904LVIPWR op amp application LM2904LVIPWR vs LM2904

רכיבים ומונחים קשורים

Texas Instruments LM2904LVIPWR LM2904LV LM2904 operational amplifier dual operational amplifier general-purpose amplifier analog signal conditioner gain-bandwidth product input offset voltage common-mode voltage slew rate TSSOP PW package 8-pin surface-mount package semiconductor active filter sensor interface audio preamplifier industrial control low-voltage operation RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר