Texas Instruments

LM2904N/NOPB Dual 1 MHz Op Amp 26 V | Texas Instruments

MPN: LM2904N/NOPB ✓ פעיל
26 V Vdss 8-PDIP Package Internal Speed
כמות הזמנה מינימלית: 1 |

LM2904N/NOPB סקירה

Texas Instruments LM2904N/NOPB is a dual, general-purpose operational amplifier with two independent amplifiers, a 26 V maximum supply rating, and 1 MHz gain-bandwidth performance in an 8-pin PDIP package. It is designed for single-supply operation across a broad voltage range, with split-supply operation also possible. The device provides internal frequency compensation and low supply-current drain, making it suitable for industrial control, instrumentation, sensor conditioning, and general analog signal-processing systems.

An operational amplifier is an amplifier IC that uses high open-loop gain to increase the voltage difference between its differential inputs. In the feedback-defined signal chain, the LM2904N/NOPB belongs to the broader hierarchy of operational amplifier, analog amplifier, amplifier IC, and semiconductor. Its two independent channels allow two separate signal paths in one package, reducing board area compared with two single-amplifier packages.

Key features include two amplifier circuits, a 26 V supply-voltage rating, 1 MHz gain-bandwidth, internal frequency compensation, and operation from a single supply or split supplies. The internal compensation removes the need for an external compensation network in ordinary closed-loop configurations. The dual-channel architecture is useful for two-stage filters, differential signal handling, buffer stages, and paired feedback networks. The 8-pin PDIP format supports through-hole assembly and prototyping systems.

The LM2904-N family is intended for general-purpose applications where a single-supply-friendly amplifier with a wide supply range is more important than rail-to-rail output swing or very high bandwidth. The device can be used as an inverting amplifier, non-inverting amplifier, voltage follower, comparator in suitable applications, or the active element in a filter. Its internally compensated architecture simplifies design, although users should account for input common-mode limitations, output swing, stability margin, and slew-rate limits when selecting feedback values.

Typical applications include low-frequency sensor interfaces, transducer signal conditioning, process-control loops, audio preamplifier stages, data-acquisition systems, and general power-control circuitry. Two amplifiers in one package are especially useful in dual-channel analog boards, instrumentation amplifiers using several gain stages, and active filter designs. The 1 MHz bandwidth supports many low- and mid-frequency industrial signals rather than high-speed video or RF tasks.

For PCB design, use the manufacturer's pin-description table and package drawing when assigning connections. Keep input and feedback traces short, provide adequate supply bypassing, and avoid placing high-impedance input nodes next to switching nodes. If the source impedance is high, add a bias resistor or buffer stage to reduce input bias-current effects and offset error. Check the operating region against the device's supply and common-mode limits.

This product page combines the LM2904N/NOPB ordering information with package, pinout, application, and drop-in replacement guidance. The comparison table highlights verified package and functional differences, while the design notes focus on practical PCB and signal-chain decisions for engineers evaluating the LM2904N/NOPB.

חלופות תחליף ישיר עבור LM2904N/NOPB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM2904N/NOPB (אותו גורם צורה וטביעת רגל) — שונים ב Package, Mounting Type, AEC-Q100 Qualification, RoHS Status.

Texas Instruments
Package: SOIC-8 (D)
Mounting Type: Surface Mount
RoHS Status: Compliant
Texas Instruments
Package: 8-pin PDIP
AEC-Q100 Qualification: not_applicable
RoHS Status: unknown

LM2904BIDR

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 8-PDIP
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2904N

✅ Drop-In
Texas Instruments
📦 8-Mini DIP
2 amplifiers · 26 V · 1 MHz · Dual independent operational amplifiers · Internally frequency compensated · Single supply or split supply · Extending to ground/VEE

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2904N

✅ Drop-In
Texas Instruments
📦 8-PDIP
2 amplifiers · 26 V · 1 MHz · Dual independent operational amplifiers · Internally frequency compensated · Single supply or split supply · Extending to ground/VEE

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2904N

✅ Drop-In
Texas Instruments
📦 8-PDIP
2 amplifiers · 26 V · 1 MHz · Dual independent operational amplifiers · Internally frequency compensated · Single supply or split supply · Extending to ground/VEE

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2904N/NOPB דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Dual general-purpose operational amplifier
Number of Amplifier Circuits 2 circuits
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1 MHz
Supply Type Single supply or split supply
Frequency Compensation Internal
מארז 8-PDIP
סוג הרכבה Through-hole
AEC-Q100 Qualification Not applicable

תצורת פינים של LM2904N/NOPB

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
פין 1 OUT A — Amplifier A output
פין 2 IN A- — Inverting input for amplifier A
פין 3 IN A+ — Non-inverting input for amplifier A
פין 4 V- — Negative supply connection
פין 5 IN B+ — Non-inverting input for amplifier B
פין 6 IN B- — Inverting input for amplifier B
פין 7 OUT B — Amplifier B output
פין 8 V+ — Positive supply connection

יישומים טיפוסיים

LM2904N/NOPB מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Process Control Loops, Audio Preamplifier Stages, Data Acquisition and Instrumentation, Active Filter and Waveform Conditioning, Power Supply Feedback and Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM2904N/NOPB is useful for conditioning low-frequency industrial sensor signals because it provides two independent, internally compensated amplifiers in one 8-PDIP package. One channel can buffer the sensor while the second can perform gain or filtering, reducing board area and simplifying through-hole assembly. With a 26 V maximum supply rating and approximately 1 MHz gain-bandwidth product, it suits process signals that change slowly relative to the amplifier bandwidth. The design should still verify the sensor output range against the input common-mode limits and account for offset and bias-current error at high source impedance.

🏭

Process Control Loops

The LM2904N/NOPB can implement error amplifiers, comparators, and output-buffer stages in a process-control board. Its dual-channel arrangement is valuable when one amplifier processes a feedback signal and the other drives a control or monitoring path. The 26 V supply rating accommodates many industrial interface voltages, while internal frequency compensation reduces external-component requirements for ordinary closed-loop designs. Confirm the output swing at the selected load and check the common-mode range around the setpoint, because the device is not a rail-to-rail precision amplifier.

🎧

Audio Preamplifier Stages

The LM2904N/NOPB can serve as a low-frequency audio preamplifier or active filter stage when the operating frequency is well below its approximately 1 MHz gain-bandwidth product. Two amplifiers in one 8-PDIP package allow a compact implementation of gain and filtering functions in a through-hole design. The device is appropriate for conventional audio-control and instrumentation paths, but designers should verify output swing, slew rate, noise performance, and load capability against the source and speaker or measurement interface.

📡

Data Acquisition and Instrumentation

The LM2904N/NOPB fits low-frequency data-acquisition front ends where a dual amplifier can buffer an input and implement gain, summation, or active filtering. The broad supply capability supports single-rail or split-rail analog sections, and the internally compensated architecture simplifies stable closed-loop implementation. For instrumentation designs, preserve signal integrity by keeping high-impedance input routes short, using adequate bypass capacitance, and avoiding shared copper paths with switching or digital return currents.

📺

Active Filter and Waveform Conditioning

The LM2904N/NOPB is useful for two-stage active filters, waveform conditioners, and gain blocks operating at low or moderate frequencies. Its approximately 1 MHz gain-bandwidth product provides useful design margin for many audio, control, and instrumentation bandwidths, while the dual package reduces component count. Select feedback resistors and capacitors against the closed-loop bandwidth and stability requirements, and ensure that the signal remains inside the amplifier's input and output common-mode limits.

⚡

Power Supply Feedback and Monitoring

The LM2904N/NOPB can monitor a supply rail, amplify a feedback error, or drive a low-current control signal in a power-control system. The 26 V maximum supply rating is relevant for industrial rails, while split-supply operation permits comparison and signal-conditioning circuits around ground. Because it is a general-purpose amplifier rather than a dedicated supervisor or precision reference, verify offset behavior, output drive, and input common-mode limits against the monitoring thresholds before deployment.

What are the key specifications of LM2904N/NOPB that engineers should know?
The LM2904N/NOPB is a dual general-purpose operational amplifier with a 26 V maximum supply rating and 1 MHz gain-bandwidth product. According to the Texas Instruments LM2904-N product page, it uses internal frequency compensation, supports single-supply or split-supply operation, and is packaged as an 8-PDIP. These characteristics make it a practical choice for low-frequency industrial, instrumentation, sensor-conditioning, and control applications where a through-hole dual amplifier is preferred.
Where to download LM2904N datasheet PDF?
The LM2904-N datasheet and ordering information are available on the Texas Instruments product page at https://www.ti.com/product/LM2904-N. The manufacturer's LM2904-N page is the preferred starting point because it links the device documentation, package information, and orderable part details. The LM2904N/NOPB ordering link is listed under the same family, and the 8-PDIP pin description should be used when assigning PCB connections.
Where to find LM2904N pinout?
The LM2904N pinout is defined by the 8-PDIP package drawing and pin-description table in the Texas Instruments LM2904-N documentation. The standard dual-amplifier arrangement places the two output pins on the ends of the package, the four input pins on pins 2, 3, 5, and 6, and the supply pins on 4 and 8. Use the manufacturer drawing to confirm orientation against the notch or pin-1 marker before assembling the board.
Is LM2904N/NOPB suitable for single-supply operation?
Yes, the LM2904N/NOPB is designed to operate from a single power supply as well as from split supplies. The Texas Instruments LM2904-N family description identifies single-supply operation as a principal feature, and the internal frequency compensation supports straightforward closed-loop use. When designing a single-rail circuit, check the input common-mode range and output swing against the actual signal levels, especially when the load approaches the supply rails.
What is the difference between LM2904N and LM2904N/NOPB?
LM2904N/NOPB is the Texas Instruments ordering designation for the 8-PDIP version of the LM2904-N dual operational amplifier, while LM2904N is the base family identifier commonly used in cross-reference listings. The relevant distinction for a replacement is the exact package and suffix: LM2904N/NOPB identifies the Texas Instruments PDIP configuration. Verify the manufacturer, package, pin arrangement, and ordering suffix before treating a similarly named part as interchangeable.
LM2904N/NOPB vs LM2904N from STMicroelectronics - which is better for a new design?
The LM2904N/NOPB and STMicroelectronics LM2904N are both dual general-purpose operational amplifiers in through-hole DIP-style packages, so the decision depends on exact electrical limits and qualification rather than the basic amplifier function. The LM2904N/NOPB listing identifies a 26 V, 1 MHz device from Texas Instruments, while the STMicroelectronics listing identifies an 8-Mini DIP LM2904N. Compare input offset, bias current, common-mode range, output swing, temperature grade, and package drawing before selecting one for a new design.
When should I choose LM2904N/NOPB over another dual op amp?
Choose LM2904N/NOPB when you need two general-purpose amplifiers in one 8-PDIP package and can operate within its 26 V supply rating and approximately 1 MHz gain-bandwidth capability. It is particularly suitable for low-frequency instrumentation, sensor interfaces, and process-control circuits where internal compensation and straightforward through-hole assembly are valuable. Choose a newer precision or rail-to-rail amplifier instead when low offset, low bias current, fast settling, or operation very close to the supply rails is essential.
What can replace LM2904N/NOPB?
The closest replacements are dual general-purpose operational amplifiers with the same 8-pin DIP footprint and compatible supply, input, output, and compensation characteristics. TI family members such as LM2904N variants, LM2904B versions, and qualified DIP options can be considered when their electrical ratings remain acceptable. STMicroelectronics, onsemi, and NXP LM2904-family devices may also be candidates, but each requires verification of the exact pinout, package dimensions, common-mode range, and supply limits before substitution.
Can STMicroelectronics LM2904N replace LM2904N/NOPB?
STMicroelectronics LM2904N can be considered as a functional replacement because it is described as a dual general-purpose amplifier in an 8-Mini DIP package. However, a drop-in claim requires more than matching the generic description: confirm that the package drawing, pin numbering, supply rating, common-mode limits, output swing, frequency compensation, and electrical tolerances meet the original circuit requirements. The exact suffix and manufacturer ordering code must also be checked before procurement.
Where to buy LM2904N/NOPB online?
Use the Request a Quote form on this page to request LM2904N/NOPB availability, pricing, and lead time from XAIPART. The exact Texas Instruments ordering code is LM2904N/NOPB, which identifies the dual amplifier in the 8-PDIP package. Include your required quantity, shipment destination, and target date in the request so the commercial response reflects the intended production quantity rather than a generic single-unit inquiry.
What is the price of LM2904N/NOPB?
The current commercial price for LM2904N/NOPB should be confirmed through the Request a Quote form on this page. Pricing can change with order quantity, inventory, and supply conditions, so the structured price information on this page should be used for reference while the quote form supplies the current transaction terms. Provide the package suffix LM2904N/NOPB and your required quantity when requesting a response.
What is the lead time for LM2904N/NOPB and is it in stock?
Current LM2904N/NOPB stock status and lead time should be requested through the Request a Quote form on this page. The part is an established Texas Instruments catalog device listed as a dual 8-PDIP operational amplifier, but production planning still requires an order-specific availability confirmation. Include your schedule, forecast, and approved manufacturer part number so the response can reflect the correct sourcing position.
How should the LM2904N/NOPB be bypassed on a PCB?
Place a supply-bypass capacitor close to pin 8 and the ground return close to pin 4, following the capacitance recommendations and layout guidance in the manufacturer documentation. Keep the power loop compact so switching current does not share a long path with the analog signal ground. If the circuit also uses an external reference or sensitive high-impedance source, route that signal away from the supply capacitor return and maintain short feedback connections.
Is LM2904N/NOPB suitable for sensor and process-control applications?
Yes, the LM2904N/NOPB is appropriate for many low-frequency sensor and process-control applications because it contains two internally compensated general-purpose amplifiers and operates from a single supply or split supplies. Its 26 V rating supports higher-voltage industrial interfaces, while the approximately 1 MHz bandwidth is ample for many slowly varying process signals. Validate the actual sensor output range, required accuracy, grounding strategy, and operating temperature against the circuit requirements.
What is the best cross-brand equivalent for LM2904N/NOPB?
The STMicroelectronics LM2904N is a strong cross-brand candidate because the manufacturer listing identifies a dual general-purpose amplifier in an 8-Mini DIP package, and onsemi and NXP also publish LM2904-family documentation. No cross-brand part should be treated as automatically drop-in without checking pin numbering, package dimensions, common-mode voltage, output swing, supply current, offset voltage, and temperature limits. Use the comparison table as a screening aid, then validate the selected device in the intended circuit.

נתוני עזר הנדסיים עבור LM2904N/NOPB — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LM2904N/NOPB when the design needs two general-purpose amplifiers, accepts a conventional 8-PDIP footprint, and operates at low or moderate frequency within the LM2904-N family's 26 V supply and approximately 1 MHz gain-bandwidth capability. It is a practical choice for sensor buffering, process-control feedback, active filtering, and instrumentation where internal compensation simplifies the closed-loop design. Use LM2904B when an upgraded family option is acceptable and its revised electrical characteristics are documented for the required application. Consider STMicroelectronics, onsemi, or NXP LM2904N devices when a second source is needed, but verify package dimensions, pinout, common-mode range, output swing, and temperature requirements. Choose a precision or rail-to-rail amplifier instead when input offset, bias current, output swing near the rails, or settling performance dominates the design.

השוואה עם חלופות

פרמטר מוצר זה LM2904B LM2904N LM2904N LM2904N
Package 8-PDIP 8-PDIP 8-Mini DIP 8-PDIP 8-PDIP
Brand Texas Instruments Texas Instruments STMicroelectronics onsemi NXP Semiconductors
Amplifier Configuration Dual Dual Dual Dual Dual
General-Purpose Application Standard dual operational amplifier Standard dual operational amplifier Standard dual operational amplifier General-purpose dual operational amplifier General-purpose dual operational amplifier

מבדילים עיקריים

  • Two independent general-purpose amplifiers in one through-hole package (לעומתSingle-amplifier alternatives)
  • Single-supply and split-supply operating flexibility (לעומתRail-to-rail precision amplifiers)
  • Through-hole integration in the 8-PDIP format (לעומתSTMicroelectronics LM2904N)

הערות תכנון

Place the power-supply bypass capacitor immediately between pins 8 and 4, with the capacitor and IC close to the device. Keep the high-current return path away from sensitive input and feedback traces. For single-supply operation, connect the bypass return directly to the appropriate ground reference and avoid routing analog input return through digital or switching-current paths.

Keep the inverting-input node physically short because feedback resistance and stray capacitance can alter gain and stability. Use a small isolation resistor close to the amplifier input when driving high-capacitance loads or sampling nodes. Avoid long unshielded traces from high-impedance sensors, and maintain a clean analog ground reference to reduce offset coupling.

Do not assume that every LM2904-family marking is interchangeable. Verify the exact manufacturer, package dimensions, pin numbering, supply rating, common-mode range, output swing, input offset, and bias current. The LM2904N/NOPB is a Texas Instruments 8-PDIP device; a similarly named part from another manufacturer may use a related but different DIP package and may have different electrical limits.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The LM2904-N product family is identified as a general-purpose dual operational amplifier. Automotive qualification and specific environmental compliance declarations are not established by the listed information.

חיפושים קשורים

lm2904n nopb lm2904n datasheet lm2904n pinout lm2904n datasheet pdf lm2904n pdf lm2904n fsc lm2904n equivalent lm2904n replacement lm2904n drop-in replacement lm2904n 8-pdip pinout lm2904n dual 1mhz op amp texas instruments lm2904n nopb

רכיבים ומונחים קשורים

Texas Instruments LM2904N/NOPB LM2904-N LM2904B STMicroelectronics LM2904N onsemi LM2904N NXP LM2904N dual operational amplifier general-purpose amplifier analog amplifier amplifier IC semiconductor single-supply operation split-supply operation internal frequency compensation 26 V maximum supply voltage 1 MHz gain-bandwidth product input common-mode voltage input offset voltage input bias current output swing slew rate 8-PDIP DIP family through-hole package industrial sensor conditioning
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר