ROHM Semiconductor

LMR341G-GTR - 2MHz Low-Power Ground-Sense Op Amp | ROHM

MPN: LMR341G-GTR ✓ פעיל
2.7 V to 5.5 V Vdss 80 µA typical Id 6-pin SSOP Package
כמות הזמנה מינימלית: 1 |

LMR341G-GTR סקירה

The ROHM Semiconductor LMR341G-GTR is a single CMOS operational amplifier designed for low-voltage, low-power ground-sense applications. It operates from 2.7 V to 5.5 V, provides a 2 MHz gain-bandwidth product and 1 V/µs slew rate, and is supplied in a 6-pin SSOP package. Its low 80 µA supply current, MOSFET input stage, shutdown function, and full-swing output make it suitable for battery-powered sensor and signal-conditioning systems.

A ground-sense operational amplifier is a rail-to-rail-input-and-output amplifier optimized for measuring small voltages relative to ground. In the broader component hierarchy, it belongs to the operational-amplifier family, then to amplifier ICs and analog semiconductors. Its low-noise CMOS input stage provides low input bias current, while the full-swing output allows the amplifier to operate close to the positive or negative supply limits without requiring a separate output-bias arrangement.

The LMR341G combines a 2 MHz gain-bandwidth product with a 1 V/µs slew rate in a low 2.7 V to 5.5 V supply range. Typical supply current is 80 µA, reducing power consumption in continuously powered equipment. The shutdown function provides a controlled low-power operating state, while the low-bias MOSFET input stage helps minimize source-current loading on high-impedance sensors. These characteristics are particularly useful when sensing battery voltage, resistive sensor outputs, or low-level analog signals.

The amplifier is designed for general-purpose low-voltage analog signal conditioning. Its CMOS input stage supports low input bias current, and its output can swing fully across the supply range for improved measurement utilization. A 2 MHz bandwidth is adequate for sensor signals that do not require high-frequency signal processing, while the 1 V/µs slew rate allows the output to track moderate input steps without requiring a larger, higher-power package.

Typical uses include battery monitoring, portable instrumentation, sensor-interface circuits, industrial control modules, and low-voltage data-acquisition systems. In a battery-powered design, the shutdown pin can reduce consumption when the measurement function is not required. For high-impedance sensor nodes, the low input bias current helps avoid input-voltage errors caused by leakage through source impedances.

PCB implementation should keep the input and feedback components close to their corresponding pins, and the decoupling capacitor should be placed directly between the supply and ground pins. Because ground-sense accuracy depends on the reference plane, connect the sensor return and amplifier ground using a low-impedance layout. Avoid long input traces and unnecessary copper around high-impedance input nodes to reduce leakage and susceptibility to interference.

This page combines the manufacturer’s device description, distributor identification, electrical characteristics, package information, sourcing guidance, and practical design considerations. It also identifies family-level drop-in candidates while clearly separating confirmed functions from parameters that require final datasheet and qualification review before a design is released to production.

חלופות תחליף ישיר עבור LMR341G-GTR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

LMR321G

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 6-pin SSOP
Same 6-pin family footprint and low-power ground-sense positioning; shutdown-function details differ, with a 0% difference in the verified 2.7 V to 5.5 V supply range.

📋 חלופה להתייחסות (לא בקטלוג)

LMR331G

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 6-pin SSOP
Same 6-pin family footprint; shutdown availability differs, while the family supply range remains within the same 2.7 V to 5.5 V class.

📋 חלופה להתייחסות (לא בקטלוג)

LMR351G

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 6-pin SSOP
Same 6-pin family footprint and low-voltage amplifier positioning; voltage and current ratings require comparison, with a 0% difference in the shared 2.7 V to 5.5 V supply class.

📋 חלופה להתייחסות (לא בקטלוג)

LMR361G

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 6-pin SSOP
Same 6-pin family footprint and shutdown-capable ground-sense architecture; supply-current and dynamic-rating differences require final verification.

📋 חלופה להתייחסות (לא בקטלוג)

LMR365G

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 6-pin SSOP
Same 6-pin family footprint and low-power ground-sense position; the shared supply range differs by 0%, while output-current and shutdown details require confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

LMR341G-GTR דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Single CMOS operational amplifier
Number of Circuits 1 circuit
Supply Voltage Range 2.7 V to 5.5 V
Gain-Bandwidth Product 2 MHz
Slew Rate 1 V/µs
זרם אספקה 80 µA typical
Output Current 45 mA typical
Input Stage MOSFET input
Output Swing Full swing
Shutdown Function Yes
טווח טמפרטורת פעולה -40 °C to 85 °C
מארז 6-pin SSOP
Packaging Option Tape and reel
סוג הרכבה Surface mount

מדריך תצורת פינים של LMR341G-GTR 6-pin ssop

תצורת פינים עבור LMR341G-GTR (מארזת 6-pin ssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 6-pin ssop עבור LMR341G-GTR

אין נתוני פריסת פינים מפורטים עבור LMR341G-GTR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LMR341G-GTR מתאים עבור 6 יישוםs: Battery Voltage Monitoring, Portable Sensor Signal Conditioning, High-Impedance Sensor Interface, Low-Voltage Data Acquisition, Industrial Control Signal Conditioning, Battery-Powered Instrumentation.

⚡

Battery Voltage Monitoring

The LMR341G-GTR fits battery-powered voltage monitoring because it operates from 2.7 V to 5.5 V and draws 80 µA typical supply current. It can amplify a small voltage-divider signal referenced to ground while its full-swing output improves use of the available supply range. The MOSFET input stage presents low input bias current, reducing errors when the divider contains high-value resistors. Its shutdown function can also isolate the sensing path when measurements are not needed, helping reduce overall consumption in portable equipment.

📱

Portable Sensor Signal Conditioning

For portable sensor interfaces, the LMR341G-GTR combines a 2 MHz gain-bandwidth product with a low-bias MOSFET input stage. This allows small sensor outputs to be amplified without loading the source heavily, while the 1 V/µs slew rate provides adequate response for many temperature, pressure, and light-sensor signals. Its 80 µA typical supply current is appropriate for continuously powered equipment, and shutdown control can be used during inactive measurement intervals.

🧩

High-Impedance Sensor Interface

The MOSFET input stage makes the LMR341G-GTR useful for high-impedance sensor nodes where input leakage could shift the measured voltage. With operation from 2.7 V to 5.5 V and a 2 MHz gain-bandwidth product, it can provide local gain close to the sensor while remaining within a compact 6-pin SSOP package. Keep input traces short, guard the sensitive node where appropriate, and confirm the actual input bias current in the manufacturer datasheet for the selected production lot and temperature range.

🖥️

Low-Voltage Data Acquisition

The LMR341G-GTR is appropriate for conditioning channels in a compact low-voltage data-acquisition system. Its 2 MHz gain-bandwidth product supports moderate-bandwidth signals, and the 1 V/µs slew rate allows the output to follow changing sensor levels. The 6-pin SSOP format simplifies routing on space-constrained boards, while shutdown control can reduce power when selected channels are inactive. The amplifier should be paired with careful grounding and local supply bypassing to maintain accurate measurements.

🏭

Industrial Control Signal Conditioning

In an industrial control module, the LMR341G-GTR can condition low-level voltage inputs before they reach an analog-to-digital converter or controller. Its 2.7 V to 5.5 V range is compatible with common low-voltage control rails, and its full-swing output allows the signal to occupy more of the available analog range. The 80 µA typical supply current supports low-power auxiliary channels, while shutdown control can suppress a channel during inactive operating states.

🔧

Battery-Powered Instrumentation

The LMR341G-GTR supports portable instrumentation requiring low supply voltage and low quiescent consumption. Its 2.7 V lower operating limit accommodates single-cell-derived rails, while the 80 µA typical supply current limits amplifier overhead in continuously active measurement paths. The shutdown function can reduce consumption between readings, and the MOSFET input stage helps preserve the accuracy of high-impedance probes. Layout should prioritize a quiet ground reference and short feedback paths.

סיכום מוצרים מומלצים

LMR321G Same-brand low-power ground-sense family candidate בשימוש ב-: Battery Voltage Monitoring, High-Impedance Sensor Interface, Battery-Powered Instrumentation LMR331G Same-brand low-power operational-amplifier family candidate בשימוש ב-: Battery Voltage Monitoring, Low-Voltage Data Acquisition, Battery-Powered Instrumentation LMR341G Base low-power ground-sense amplifier בשימוש ב-: Portable Sensor Signal Conditioning, Industrial Control Signal Conditioning LMR351G Same-brand amplifier family candidate בשימוש ב-: Portable Sensor Signal Conditioning, Industrial Control Signal Conditioning LMR361G Shutdown-capable family candidate בשימוש ב-: High-Impedance Sensor Interface LMR365G Low-power family candidate בשימוש ב-: Low-Voltage Data Acquisition
What is the operating voltage range of LMR341G-GTR?
The LMR341G-GTR operates from 2.7 V to 5.5 V. According to the ROHM product description, it is a low-supply-current ground-sense operational amplifier, and its input stage uses MOSFETs to provide low input bias current. The 5.5 V maximum makes it suitable for 3.3 V and 5 V systems, while the 2.7 V lower limit supports low-voltage battery-powered equipment.
What are the key specifications of LMR341G-GTR that engineers should know?
The LMR341G-GTR is a single CMOS operational amplifier with 2 MHz gain-bandwidth product, 1 V/µs slew rate, 80 µA typical supply current, and operation from 2.7 V to 5.5 V. The manufacturer also identifies a shutdown function, full-swing output, and MOSFET input stage. These characteristics place it between general-purpose op amps and more specialized low-power sensor amplifiers.
Where can I download the LMR341G-GTR datasheet PDF?
The official LMR341G-GTR documentation is available through the ROHM product page at https://www.rohm.com/products/amplifiers-and-linear/operational-amplifiers/low-power/ground-sense/lmr341g-product. Use the manufacturer datasheet for the complete pin-description table, electrical limits, recommended operating conditions, typical performance curves, and package drawings before finalizing a PCB design.
Where can I find the LMR341G-GTR pinout?
The LMR341G-GTR pin assignments are identified in the ROHM datasheet, which is linked from the official LMR341G product page. The device is identified in distributor records as a 6-pin SSOP, but the individual terminal names are not reproduced here because they were not stated in the retrieved product records. Assign PCB tracks and verify no-connect or shutdown functions against the manufacturer pin-description table.
Is LMR341G-GTR suitable for battery-powered sensor applications?
Yes, the LMR341G-GTR is well suited to battery-powered sensor interfaces because it operates down to 2.7 V, consumes 80 µA typical supply current, and has a MOSFET input stage with low input bias current. The shutdown function can further control power use when measurements are not continuously required, although total battery life also depends on the sensor and external load.
What can replace LMR341G-GTR?
A replacement must use the same 6-pin footprint and preserve the 2.7 V to 5.5 V supply range, 2 MHz bandwidth, 1 V/µs slew rate, shutdown behavior, and pin functions. The LMR321G and LMR331G are family-level candidates because they use the same low-power ground-sense amplifier platform, but production substitution requires confirmation of pin assignments, shutdown polarity, output swing, input bias current, and electrical limits from each manufacturer’s datasheet.
Is LMR341G-GTR the same as LMR331G?
No, the LMR341G-GTR and LMR331G are related low-power CMOS operational amplifiers but are not the same ordered device. The LMR341G includes a shutdown function, while the functional differences between the two family members must be checked against their individual pinouts. Treat the LMR331G as a candidate only after confirming pin compatibility and the required operating mode.
LMR341G-GTR vs LMR351G - which is better for a low-voltage sensor interface?
The LMR341G-GTR is the stronger default choice when a 2.7 V to 5.5 V rail, 2 MHz bandwidth, 1 V/µs slew rate, low 80 µA supply current, and shutdown control are required. The LMR351G may suit different voltage, current, or shutdown requirements, but it should not replace the LMR341G-GTR unless its pinout, supply limits, and dynamic performance match the existing design.
When should I choose LMR341G-GTR over LMR351G?
Choose the LMR341G-GTR when the design specifically benefits from its 2.7 V to 5.5 V operating range, 2 MHz gain-bandwidth product, 1 V/µs slew rate, and shutdown function. Select the LMR351G instead when its wider voltage range or different electrical ratings are required and the footprint remains unchanged. The final choice should be based on the power rail and sensor bandwidth.
Is LMR341G-GTR suitable for a 3.3 V application?
Yes, a 3.3 V supply lies within the LMR341G-GTR’s 2.7 V to 5.5 V operating range. Its 2 MHz gain-bandwidth product is appropriate for many low-frequency sensor signals, and its 80 µA typical supply current supports power-conscious designs. Check the datasheet’s output-swing and input-common-mode limits at 3.3 V to ensure the required signal remains inside the linear operating region.
Where to buy LMR341G-GTR online?
Use the Request a Quote form on this page to request availability, current pricing, order quantities, and lead time for the exact LMR341G-GTR ordering code. The identified part number includes the manufacturer’s package and tape-and-reel configuration, so confirm that the quoted suffix matches LMR341G-GTR before releasing a purchase order.
What is the price of LMR341G-GTR?
The current commercial terms for LMR341G-GTR are shown through the Request a Quote form on this page. Submit the required quantity and packaging details to obtain a current quotation rather than relying on an aging catalog amount. This process also confirms exact MPN matching, stock status, minimum order quantity, and expected delivery.
What is the lead time for LMR341G-GTR?
The current lead time for LMR341G-GTR should be confirmed through the Request a Quote form on this page. Provide the required quantity, reel format, and target delivery date so the supplier can confirm allocation and logistics. The tape-and-reel ordering suffix GTR should be included in the quotation request to avoid package ambiguity.
Is LMR341G-GTR in stock?
Current stock for the exact LMR341G-GTR ordering code is best confirmed through the Request a Quote form on this page. Distributor listings can change quantity and lead time rapidly, so request a live response for your required order quantity. Specify whether full reels, cut tape, or another approved packing format is needed.
Does LMR341G-GTR support shutdown and full-swing output?
Yes. The ROHM product description identifies the LMR341G as a single CMOS operational amplifier with a shutdown function, full-swing output, and MOSFET input stage. In circuit design, verify the shutdown control polarity and active state from the manufacturer pin table, then confirm that the required output voltage remains within the load-dependent swing limits.

נתוני עזר הנדסיים עבור LMR341G-GTR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LMR341G-GTR for 2.7 V to 5.5 V systems that need a low-power, single CMOS amplifier, low input bias current, full-swing output, and shutdown control. It is particularly appropriate for battery-powered monitoring, high-impedance sensors, and portable instrumentation where 80 µA typical supply current is useful. The LMR321G is a family-level candidate when its shutdown behavior and electrical limits satisfy the design, while the LMR331G may be considered when shutdown functionality is unnecessary. Evaluate the LMR351G, LMR361G, and LMR365G when their individual voltage, current, and dynamic ratings better match the required operating condition. In every case, final substitution requires verification of the manufacturer pin table, package drawing, input/output limits, shutdown polarity, and production qualification status; package similarity alone does not establish drop-in compatibility.

השוואה עם חלופות

פרמטר מוצר זה LMR321G LMR331G LMR351G LMR361G LMR365G
Brand ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor
Package 6-pin SSOP 6-pin SSOP 6-pin SSOP 6-pin SSOP 6-pin SSOP 6-pin SSOP

מבדילים עיקריים

  • Low-voltage operation with integrated shutdown (לעומתLMR331G)
  • Low-power MOSFET-input ground-sense architecture (לעומתLMR321G)
  • Balanced dynamic performance for sensor signals (לעומתLMR351G)
  • Full-swing output improves analog range utilization (לעומתLMR361G)

הערות תכנון

Place the supply bypass capacitor directly between the amplifier supply and ground pins, and keep the input and feedback traces short. Ground-sense accuracy depends on a low-impedance return path; route sensor ground and analog ground without current-sharing with motors, relays, or switching-converter returns. For a high-impedance sensor node, minimize exposed copper and use a suitable guard arrangement.

Estimated: with a 3.3 V supply and 80 µA typical supply current, amplifier supply consumption is approximately 0.264 mW before sensor and load current is included. This estimate uses 3.3 V and 80 µA and excludes output-current dissipation and external circuit losses. Shutdown can reduce consumption when the measurement path is not continuously required, but its active polarity must be confirmed from the manufacturer pin description.

Use feedback-gain values that preserve stability with the amplifier’s 2 MHz gain-bandwidth product and account for parasitic capacitance in the feedback network. The 1 V/µs slew rate supports moderate signal slopes, but very fast inputs can trigger slew-rate distortion. Avoid placing high-speed digital traces beneath sensitive input or feedback nodes, and use a quiet analog ground reference.

Do not assume every 6-pin amplifier in the same family has identical shutdown polarity, output behavior, or enable thresholds. Before substituting a family member, compare the official pin table, supply range, input common-mode limits, output swing, quiescent current, and package drawing. Also verify that the GTR ordering code represents the required tape-and-reel configuration for production.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The retrieved product information does not explicitly state the regulatory status of LMR341G-GTR. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with ROHM before production release.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LMR341G-GTR datasheet LMR341G-GTR pinout LMR341G-GTR datasheet pdf LMR341G-GTR equivalent LMR341G-GTR replacement LMR341G-GTR drop-in replacement LMR341G-GTR vs LMR331G LMR341G-GTR 6 pin SSOP LMR341G-GTR 2.7V 5.5V LMR341G-GTR battery sensor amplifier LMR341G-GTR price LMR341G-GTR stock ROHM LMR341G-GTR LMR341G ground sense op amp LMR341G shutdown full swing amplifier

רכיבים ומונחים קשורים

ROHM Semiconductor LMR341G-GTR LMR341G LMR321G LMR331G LMR351G LMR361G LMR365G ground-sense operational amplifier operational amplifier CMOS amplifier amplifier IC analog semiconductor MOSFET input stage low-dropout voltage shutdown function full-swing output gain-bandwidth product slew rate supply current input bias current 6-pin SSOP surface-mount package battery-powered sensor interface
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר