Texas Instruments

MAX232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MPN: MAX232EIPWR ✓ פעיל
5 V Vdss 16-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

MAX232EIPWR סקירה

The Texas Instruments MAX232EIPWR is a dual RS-232 driver and receiver that provides two data channels at up to 250kbps from a single 5V supply. It uses an on-chip capacitive voltage generator to produce the bipolar TIA/EIA-232-F voltage levels required by RS-232, while the receivers convert remote serial signals to 5V TTL/CMOS logic. The device is available in a 16-pin TSSOP package.

An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between a digital controller and a physical RS-232 link. In the signal hierarchy, the MAX232EIPWR belongs to the RS-232 transceiver class, which combines line drivers, line receivers, and charge-pump voltage generation within one interface package. Unlike a TTL/CMOS serial controller, this device does not implement a communication protocol; it converts logic levels and protects the physical interface.

Key electrical features include 5V operation, dual transmit and receive channels, 250kbps maximum data rate, and approximately ±9V RS-232 output levels. According to the MAX232E product page, all RS-232 pins provide 15kV human-body-model and IEC61000-4-2 air-gap discharge protection. The line-driver pins additionally provide 8kV IEC61000-4-2 contact-discharge protection, making the interface suitable for industrial equipment, service ports, and external cables where electrostatic discharge is a practical concern.

The integrated voltage generator eliminates the need for a separate negative supply rail. Four charge-pump capacitors allow the device to translate TTL/CMOS transmit inputs into RS-232 levels from one 5V supply. Each receiver converts a TIA/EIA-232-F input into a 5V TTL/CMOS signal, allowing a microcontroller, programmable logic controller, or test system to communicate over a legacy serial port without a separate level-shifting circuit.

Typical uses include industrial control-panel service ports, configuration and debug interfaces, laboratory equipment, point-of-sale systems, and legacy peripherals that retain an RS-232 connection. The 250kbps capability supports moderate-rate command and data links, although the connected software protocol must also be configured for the selected baud rate. Because RS-232 is a point-to-point, single-ended interface, ground reference and cable routing remain important in multi-device installations.

For PCB layout, place the charge-pump capacitors and the VCC bypass capacitor close to their associated pins, and route the RS-232 driver and receiver connections directly to the connector. Keep logic-side traces away from exposed cable-facing nets, provide a stable chassis or signal-ground connection strategy, and avoid long unprotected stubs. The integrated ESD protection reduces connector-side risk but does not eliminate the need for good mechanical grounding and cable management.

This page consolidates the verified MAX232E electrical characteristics, ordering information, protection ratings, application guidance, and interface design considerations into a practical engineering reference. It also distinguishes the MAX232EIPWR from related MAX232 and MAX3232E family members so engineers can assess pin compatibility, supply voltage, data rate, and package differences before approving a substitution.

חלופות תחליף ישיר עבור MAX232EIPWR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX232EIPWR (אותו גורם צורה וטביעת רגל) — שונים ב Package, Maximum Data Rate, Product Type, Supply Voltage Range.

Texas Instruments
Maximum Data Rate: 250kbps
Product Type: RS-232 transceiver
Supply Voltage Range: 4.5V to 5.5V
השווה עם MAX232EIPWR →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
Supply Voltage Range: 3 V to 5.5 V
השווה עם MAX232EIPWR →

MAX3232EIPWG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 16-pin TSSOP
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232EIPWR מפרטים

Product Type Dual RS-232 driver and receiver transceiver
Number of Channels 2 channels
Number of Drivers 2
Number of Receivers 2
מתח אספקה 5 V
Maximum Data Rate 250 kbps
RS-232 Output Level Approximately -9 V to +9 V
Receiver Input Level TIA/EIA-232-F input converted to 5 V TTL/CMOS
On-Chip Voltage Generator Yes, capacitive voltage generator using four capacitors
ESD Protection on RS-232 Pins 15 kV HBM and 15 kV IEC61000-4-2 air-gap discharge
Contact Discharge Protection 8 kV IEC61000-4-2 on RS-232 driver pins
מארז 16-pin TSSOP
סוג הרכבה Surface mount
Supply Topology Single 5 V supply
Standard TIA/EIA-232-F

מדריך תצורת פינים של MAX232EIPWR 16-pin tssop

תצורת פינים עבור MAX232EIPWR (מארזת 16-pin tssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin tssop עבור MAX232EIPWR

אין נתוני פריסת פינים מפורטים עבור MAX232EIPWR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX232EIPWR מתאים עבור 6 יישוםs: Industrial Controller Service Port, Point-of-Sale Terminal Interface, Laboratory Instrument Control, Legacy Peripheral Upgrade, Programmable Logic Debug Interface, Data Acquisition and Test System.

🏭

Industrial Controller Service Port

The MAX232EIPWR fits an industrial controller that retains an RS-232 configuration or service port alongside a modern microcontroller. Its two driver and two receiver channels support bidirectional console communication, while the single 5V supply avoids a separate negative rail. The 15kV HBM and IEC61000-4-2 air-gap protection ratings improve robustness on externally accessible RS-232 pins. Place the charge-pump capacitors and supply bypass capacitor close to the device, and connect the cable shield or signal ground according to the installation’s grounding strategy.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale system can use the MAX232EIPWR to bridge a 5V controller to an RS-232 peripheral such as a receipt printer, customer display, or magnetic-stripe reader. Two channels allow separate transmit and receive paths without adding another transceiver. The integrated capacitive voltage generator produces the required bipolar RS-232 levels from the controller’s 5V supply. Keep the interface connector physically separated from high-current switching circuitry and verify that the peripheral’s electrical standard is TIA/EIA-232-F rather than RS-485.

🔧

Laboratory Instrument Control

The MAX232EIPWR can connect a laboratory instrument’s control board to a legacy RS-232 test fixture or service computer. Its 250kbps maximum data rate is suitable for command traffic and moderate measurement data, while the integrated voltage generator simplifies single-supply test equipment. ESD protection on the cable-facing pins helps laboratories where instruments are frequently connected and disconnected. For reliable measurements, use shielded cable, establish one reference ground, and avoid sharing noisy return paths between the interface and precision analog circuitry.

🔌

Legacy Peripheral Upgrade

The MAX232EIPWR allows a new digital controller to communicate with a legacy peripheral that exposes only an RS-232 connector. Because the receivers operate from the same 5V system used by many modern controllers, the interface can replace a more complex discrete level-shifting circuit. Verify the peripheral’s baud rate, logic polarity, handshake requirements, and connector pinout before connecting it. Software must also support the RS-232 protocol because the MAX232EIPWR performs only electrical level conversion and ESD protection.

⚡

Programmable Logic Debug Interface

The MAX232EIPWR can provide a simple two-channel console or programming interface for programmable logic or embedded-control boards. One pair of channels can carry serial commands and status information while another pair is available for auxiliary data or a second port. The 250kbps capability is substantially faster than the low-rate console links commonly used in RS-232 systems. Place the device near the connector, preserve the recommended charge-pump layout, and keep the logic-side interface away from the protected cable-side nets.

📊

Data Acquisition and Test System

The MAX232EIPWR is useful in data-acquisition equipment that must retain an RS-232 link for calibration, logging, or external test commands. Its two full-duplex channels can operate on separate ports, and the integrated charge pump reduces external power-conversion complexity. The interface’s IEC61000-4-2 protection helps when the port is exposed to operator-accessible cables, although the overall enclosure still determines the final electrostatic-discharge environment. Use a dedicated return-ground path to keep interface transients away from measurement references.

סיכום מוצרים מומלצים

MAX3232EIPWR Same-family RS-232 interface option for new 16-pin TSSOP designs בשימוש ב-: Industrial Controller Service Port, Point-of-Sale Terminal Interface, Legacy Peripheral Upgrade, Programmable Logic Debug Interface MAX232EIPWR Texas Instruments בשימוש ב-: Laboratory Instrument Control, Data Acquisition and Test System
What is the MAX232EIPWR used for?
The MAX232EIPWR is used to connect 5V TTL/CMOS logic to a bipolar RS-232 serial port. It contains two RS-232 drivers, two receivers, and an integrated capacitive voltage generator, so both logic-to-RS-232 and RS-232-to-logic conversions are handled by one device. The Texas Instruments product page describes it as a dual-channel interface operating from a single 5V supply at up to 250kbps.
What is the maximum data rate of the MAX232EIPWR?
The MAX232EIPWR supports a maximum data rate of 250kbps. This rate applies to each of the two RS-232 channels under the operating conditions stated in the manufacturer documentation. It is suitable for command links, configuration ports, and legacy serial peripherals, although the host software must be programmed with a compatible baud rate and the cable must preserve the RS-232 signal integrity.
Does the MAX232EIPWR need a negative power supply?
No. The MAX232EIPWR generates the required negative RS-232 voltage internally using a capacitive voltage generator with four external charge-pump capacitors. According to the MAX232E overview, this allows the device to produce TIA/EIA-232-F voltage levels from a single 5V supply. Follow the manufacturer’s recommended capacitor values and placement instructions when laying out the charge-pump network.
What ESD protection does the MAX232EIPWR provide?
All RS-232 pins of the MAX232EIPWR provide 15kV human-body-model and 15kV IEC61000-4-2 air-gap discharge protection. The driver pins also provide 8kV IEC61000-4-2 contact-discharge protection. These ratings apply to the protected interface pins and help improve system robustness, but cable routing, connector construction, and proper grounding remain part of the overall electrostatic-discharge design.
What is the difference between MAX232EIPWR and MAX3232EIPW?
The MAX3232EIPW is a closely related improved dual RS-232 transceiver from the same product family, while the MAX232EIPWR is the MAX232E device specified here. Both use a single 5V supply, an integrated charge-pump voltage generator, two driver/receiver channels, and a 16-pin TSSOP option. Check the manufacturer pin descriptions and ordering tables before approving a substitution because interface, shutdown, and supply-startup details can affect the board design.
When should I choose the MAX232EIPWR instead of a MAX3232E device?
Choose the MAX232EIPWR when an existing board is designed specifically around the MAX232E function, pin arrangement, and external capacitor network. Choose a MAX3232E-family option for a new design when the manufacturer’s improved-device recommendation and any additional shutdown, fail-safe, or supply features better match the system requirements. Both approaches require verification of pin compatibility, capacitor values, logic levels, and package geometry.
Can the MAX232EIPWR be used in an industrial control system?
Yes, the MAX232EIPWR is suitable for industrial RS-232 service and configuration ports because it includes 15kV HBM, 15kV IEC61000-4-2 air-gap, and 8kV IEC61000-4-2 contact protection on the applicable RS-232 pins. For industrial deployment, also implement a defined signal-ground strategy, use a suitable connector, keep exposed cable wiring away from sensitive logic, and evaluate the enclosure and cable installation.
Where can I download the MAX232EIPWR datasheet PDF?
The official MAX232E documentation is available from Texas Instruments through the manufacturer datasheet link on this page. The device overview, ordering information, pin descriptions, electrical characteristics, and recommended application circuit should be used as the primary design references. The MAX232EIPWR is the 16-pin TSSOP ordering configuration of the MAX232E family, so confirm the full suffix before copying values into a schematic or BOM.
Where can I find the MAX232EIPWR pinout?
The authoritative MAX232EIPWR pinout is shown in the pin-description table of the Texas Instruments MAX232E datasheet. Use that table when assigning the 16 TSSOP connections, including the charge-pump capacitor pins, 5V supply, ground, driver outputs, receiver inputs, and logic-side signal functions. The pin diagram is not reproduced here because a complete verified pin-description table was not included in the product information used for this page.
What can replace the MAX232EIPWR?
The closest same-family replacement candidate is the MAX3232EIPW, which uses a 16-pin TSSOP configuration and the same 5V dual-driver/dual-receiver concept. It must still be checked for functional differences in shutdown pins, receiver behavior, and application requirements. Cross-family devices should be considered only after comparing the actual pin functions, charge-pump capacitor network, supply requirements, and package dimensions.
Is the MAX232EIPWR the same as the MAX232EIPWRR?
No, the full ordering codes indicate different packing arrangements. The MAX232EIPWR is the 16-pin TSSOP ordering configuration specified on this page, while the MAX232EIPWRR denotes the tape-and-reel shipping form of the corresponding device. Engineers should use the exact ordering code required by their assembly process and confirm that the underlying electrical and package specifications are identical before substitution.
How should the MAX232EIPWR be laid out on a PCB?
Place the four charge-pump capacitors close to their specified pins and place the VCC bypass capacitor immediately adjacent to the supply connection. Route connector-side driver and receiver nets directly to the RS-232 interface while keeping them separated from sensitive logic traces. A compact, low-loop charge-pump layout is essential because long traces can increase radiated noise and reduce the effectiveness of the device’s internal switching conversion.
How much power and ground isolation does the MAX232EIPWR need?
The MAX232EIPWR operates from a single 5V supply and uses an on-chip capacitive voltage generator to create the negative RS-232 output swing. The application design must still provide a low-impedance supply path, local bypass capacitor, and stable ground return for both logic and RS-232 signals. Exact supply-current limits and capacitor recommendations should be taken from the manufacturer datasheet for the chosen operating conditions.
Where can I buy MAX232EIPWR and check its price?
Use the Request a Quote form on this page to request current MAX232EIPWR pricing, availability, minimum order quantity, and lead time. A verified listing shows a unit price of USD 1.05 as of November 2026, but the listing does not provide qualifying quantity-break tiers. Request a written quotation for the exact quantity and packing configuration needed for production.
What are the key specifications engineers should know about MAX232EIPWR?
The MAX232EIPWR is a 5V, dual-channel RS-232 transceiver rated for data rates up to 250kbps in a 16-pin TSSOP package. Its important features include two drivers, two receivers, an integrated four-capacitor charge-pump voltage generator, approximately ±9V RS-232 output levels, and IEC61000-4-2 electrostatic-discharge protection. The manufacturer also lists 15kV HBM protection on the RS-232 pins.
What is the best Analog Devices or STMicroelectronics equivalent for MAX232EIPWR?
The MAX3232EIPW is the closest same-manufacturer option in the MAX232/MAX3232E interface family, but it is not simply an identical part without review. Its manufacturer documentation must be compared for pin functions, shutdown behavior, charge-pump capacitors, and data-rate limits. For a cross-brand selection, require a verified 16-pin TSSOP footprint with compatible driver, receiver, supply, and external-capacitor connections before treating it as a drop-in replacement.

נתוני עזר הנדסיים עבור MAX232EIPWR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the MAX232EIPWR for an existing or new 16-pin TSSOP design that specifically requires the MAX232E function, its documented IEC61000-4-2 protection, and operation from a single 5V supply. It is particularly appropriate for industrial service ports, legacy peripherals, laboratory equipment, and configuration interfaces that operate at up to 250kbps. MAX232EIPWRR offers the same family and package for tape-and-reel production requirements, with the suffix difference representing packing rather than an electrical redesign. Consider MAX3232EIPW for a new design when the manufacturer’s improved-device guidance and its additional interface features are preferable, but verify every pin function and the external capacitor network before treating it as a replacement. None of these choices permits ignoring connector-side grounding, cable quality, or charge-pump layout. A different manufacturer should be selected only after confirming the exact TSSOP footprint, pin mapping, supply behavior, capacitor network, and protection requirements.

השוואה עם חלופות

פרמטר מוצר זה MAX3232EIPW MAX232EIPWRR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Device Type Dual RS-232 driver and receiver Dual RS-232 driver and receiver Dual RS-232 driver and receiver
Supply Voltage 5 V 5 V 5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
Number of Channels 2 2 2
RS-232 Output Swing Approximately ±9 V Approximately ±9 V Approximately ±9 V
Voltage Generator Internal capacitive generator using four capacitors Internal capacitive generator Internal capacitive generator using four capacitors

מבדילים עיקריים

  • Integrated protected RS-232 interface in a single 5V part (לעומתMAX3232EIPW)
  • Single-supply negative-rail generation (לעומתMAX232EIPWRR)
  • Two-channel bidirectional connectivity (לעומתMAX3232EIPW)

הערות תכנון

Place the four charge-pump capacitors and the VCC bypass capacitor as close as practical to their specified pins. Keep the charge-pump loop compact because long traces and large loop area can increase radiated emissions. Follow the MAX232E datasheet for capacitor values and connections. Route the RS-232 connector nets directly to the transceiver, and keep those nets away from sensitive analog inputs and high-speed digital clocks.

Do not treat the RS-232 interface as a differential bus or connect it to an RS-485 receiver. MAX232EIPWR uses bipolar single-ended signaling and requires an RS-232-compatible receiver with the correct ground reference. Also verify the full device suffix before layout because package, temperature, and packing codes differ among MAX232E orderable configurations. Do not substitute a SOIC package for the specified 16-pin TSSOP without a PCB footprint change.

The on-chip capacitive voltage generator switches internally to create negative RS-232 voltage, so supply-current transitions and radiated noise deserve attention. Provide a low-impedance 5V connection, place the bypass capacitor adjacent to VCC, and avoid routing the charge-pump network beneath sensitive analog sections. At the cable interface, use a defined signal-ground or chassis-ground strategy appropriate to the equipment and keep exposed cable wiring short relative to the ESD-current path.

RS-232 is point-to-point, so each driver should connect to one receiving node and unused driver or receiver inputs should not be left as unterminated test points. Confirm the logic polarity of the connected controller, because the MAX232EIPWR provides voltage conversion rather than protocol inversion or configuration. Long cables can accumulate noise and reflections; use a quality shielded cable, maintain a continuous reference ground, and avoid daisy-chaining RS-232 ports.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer documentation identifies IEC61000-4-2 air-gap and contact-discharge protection ratings. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed.

חיפושים קשורים

MAX232EIPWR datasheet MAX232EIPWR pinout MAX232EIPWR datasheet pdf Texas Instruments MAX232EIPWR MAX232EIPWR 16-TSSOP MAX232EIPWR 250kbps RS-232 MAX232EIPWR IEC61000-4-2 protection MAX232EIPWR equivalent MAX232EIPWR replacement MAX232EIPWR vs MAX3232EIPW MAX232EIPWR price MAX232EIPWR stock MAX232EIPWR RS-232 application circuit MAX232EIPWR charge pump capacitors MAX232EIPWR TSSOP footprint

רכיבים ומונחים קשורים

Texas Instruments MAX232EIPWR MAX232E MAX3232EIPW MAX232EIPWRR RS-232 TIA/EIA-232-F RS-232 transceiver line driver line receiver TTL/CMOS logic level capacitive voltage generator charge-pump capacitors IEC61000-4-2 ESD protection human body model 16-pin TSSOP surface mount 250kbps single 5V supply industrial control point-of-sale terminal laboratory instrument legacy peripheral
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר