Texas Instruments

SN74LS242D - Quad Bus Transceiver | Texas Instruments | SOIC-14

MPN: SN74LS242D ✓ פעיל
14-pin SOIC Package
כמות הזמנה מינימלית: 1 |

SN74LS242D סקירה

The Texas Instruments SN74LS242D is a quadruple bus transceiver integrated circuit in a 14-pin SOIC package, with a stated operating temperature range of 0°C to 70°C. It combines four transceiver sections for connecting two independent buses, supporting bidirectional signal transfer where the direction of each channel must be controlled by the surrounding system.

A bus transceiver is a logic-interface device that combines driver and receiver functions in one package. In the broader semiconductor hierarchy, the SN74LS242D belongs to the logic IC family, specifically the 74LS bus-buffer and transceiver category. Its four sections can help reduce the number of discrete buffers required when a system exchanges data between incompatible bus directions or separates a source from a receiving device.

The principal device-level facts are its quadruple-transceiver configuration, 14-pin SOIC package, and 0°C-to-70°C operating range. Pin functions, supply voltage, propagation delay, output-current capability, input and output thresholds, and enable-control logic should be confirmed in the Texas Instruments SN74LS242 datasheet before schematic capture or timing analysis. The SOIC form factor supports conventional through-hole PCB assembly and automated insertion.

As a member of the SN74LS logic family, the device is intended for digital bus-interface applications rather than precision analog, high-speed memory, or RF signal conditioning. The four channels provide a practical way to implement buffered, direction-controlled interconnects in equipment built with TTL-compatible logic. PCB designers should preserve the manufacturer's connection and decoupling recommendations to avoid introducing bus-contention or signal-integrity problems.

Typical uses include general-purpose digital bus isolation, data acquisition, industrial control interfaces, instrumentation, computer peripherals, and test-equipment signal routing. In each case, the transceiver's direction-control and enable behavior must be coordinated with the logic driving the bus so that drivers are never simultaneously commanded in opposite directions.

The principal design consideration is bus contention. Before enabling either side of a channel, confirm that all external devices connected to that side are disabled or high-impedance. Keep data and direction traces short, provide a stable supply reference, and place the required bypassing capacitance close to the device. The 0°C-to-70°C rating makes this part appropriate for commercial-temperature equipment rather than extended industrial or automotive environments.

This page organizes the SN74LS242D's function, package, environmental limits, sourcing information, replacement constraints, and application guidance. It also distinguishes verified ordering information from engineering assumptions, helping designers determine whether the 14-pin SOIC device fits an existing board and which signal-integrity checks are required before deployment.

חלופות תחליף ישיר עבור SN74LS242D — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

SN74LS242D דירוגים מרביים ומאפיינים חשמליים

Device Type Quad bus transceiver
Number of Transceiver Elements 4 elements
Logic Family 74LS
מארז 14-pin SOIC
סוג הרכבה Through-hole SOIC
טווח טמפרטורת פעולה 0°C to 70°C

מדריך תצורת פינים של SN74LS242D 14-pin soic

תצורת פינים עבור SN74LS242D (מארזת 14-pin soic). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 14-pin soic עבור SN74LS242D

אין נתוני פריסת פינים מפורטים עבור SN74LS242D.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SN74LS242D מתאים עבור 6 יישוםs: General-Purpose Digital Bus Buffering, Data Acquisition Interface, Industrial Control Interface, Test and Measurement Equipment, Computer Peripheral Interconnect, Instrumentation Signal Routing.

🔧

General-Purpose Digital Bus Buffering

The SN74LS242D fits general-purpose digital bus buffering because it combines four transceiver sections in one 14-pin SOIC package. Each section can support a direction-controlled interface between a bus source and a bus receiver, reducing the number of separate buffer packages required on a board. The confirmed commercial temperature range of 0°C to 70°C suits room-temperature control and instrumentation equipment. During implementation, verify the enable and direction truth table in the manufacturer datasheet, prevent simultaneous opposing drive from connected devices, and route the bus so that disabled outputs do not contend with active logic.

📊

Data Acquisition Interface

The SN74LS242D can be used at the interface between a data-acquisition system and external digital equipment when the system requires four controlled transceiver channels rather than four separate devices. Its 14-pin SOIC format keeps the circuit compact, while the quad organization provides a consistent way to isolate or buffer two sides of a digital connection. Because the device is a logic transceiver rather than an analog front end, it should remain behind the converter that represents each measurement. Confirm the direction controls and signal thresholds against the Texas Instruments datasheet, and design the analog section to prevent bus activity from disturbing sensitive conversion circuitry.

🏭

Industrial Control Interface

The SN74LS242D is applicable to commercial-temperature industrial control equipment that uses TTL-compatible logic and requires four direction-controlled bus paths. The quad arrangement can connect a controller to external modules while keeping driver and receiver functions in one standardized package. Its stated 0°C-to-70°C range suits controlled indoor installations, but it does not by itself establish suitability for extended industrial temperatures. Designers should include system-level bus isolation where required, control enable states during reset, and verify that all connected outputs are high impedance before enabling a driver. PCB placement should minimize loop area and preserve a common ground reference between the transceiver and communicating devices.

🖥️

Test and Measurement Equipment

The SN74LS242D can support internal digital routing in test and measurement instruments where four TTL-compatible transceiver sections are needed between test-control logic and external connectors or fixtures. Combining four sections in one 14-pin SOIC can simplify PCB area planning, while the controlled operating range of 0°C to 70°C aligns with laboratory and production-test environments. Engineers should treat the transceiver as a digital route, not as an instrument input or analog buffer. Use the datasheet timing information when establishing setup and hold requirements, avoid reflective stubs on long cable connections, and ensure that connected test equipment remains disabled during mode changes to prevent bus contention.

💻

Computer Peripheral Interconnect

The SN74LS242D is suitable for legacy-style computer peripheral interconnects that use TTL-compatible bidirectional digital buses and require four controlled channels. Its four transceiver sections can support routing between a controller and multiple peripheral-side buses when direction is managed by the host logic. The 14-pin SOIC package is convenient for conventional through-hole board assembly and does not require a fine-pitch surface-mount footprint. The key integration risk is contention at power-up or during reset. Hold the transceiver disabled until every connected device has reached a defined state, and use the manufacturer enable and direction truth table to avoid driving two outputs against each other.

🧩

Instrumentation Signal Routing

The SN74LS242D can route digital control and status signals inside instrumentation systems where separate source and destination logic domains must be connected through a direction-controlled transceiver. Its four channels offer a consolidated interface for enable, mode, interlock, or status paths while preserving the familiar 74LS logic family. The device should be used only for compatible digital signals; it is not a substitute for precision analog buffers or isolation amplifiers. Use short, properly referenced traces and follow the datasheet recommendations for bypassing and enable sequencing. Where safety or high-voltage isolation matters, add the required isolation barrier rather than relying on the transceiver package for protection.

What is the SN74LS242D?
The SN74LS242D is a Texas Instruments quadruple bus transceiver in a 14-pin SOIC package. According to the Texas Instruments SN74LS242D datasheet, the device contains four bus-transceiver sections for digital interfaces and has a stated operating range of 0°C to 70°C. It is categorized as a logic IC and is intended for TTL-compatible bus-routing and buffering applications.
What package does the SN74LS242D use?
The SN74LS242D uses a 14-pin SOIC package. The Texas Instruments SN74LS242D datasheet identifies the package as 14-SOIC, allowing engineers to select a matching PCB footprint and verify pin orientation before assembly. Because the component has through-hole leads, standard through-hole layout and soldering processes can be used rather than a surface-mount reflow-only process.
What is the operating temperature range of the SN74LS242D?
The SN74LS242D operates from 0°C to 70°C. This commercial-temperature range is stated in the Texas Instruments SN74LS242D datasheet and is suitable for equipment expected to operate in controlled indoor environments. The device should not be assumed suitable for extended industrial temperatures, automotive environments, or freezing conditions without additional device-specific qualification.
Where can I download the SN74LS242D datasheet PDF?
The SN74LS242D datasheet PDF can be accessed through the linked Texas Instruments document page at Alldatasheet. The document identifies SN74LS242D as a quadruple bus transceiver and provides the authoritative pin assignments, electrical characteristics, and operating information needed for design review. Use the four-page SN74LS242D document associated with this exact ordering code.
Where can I find the SN74LS242D pinout?
The SN74LS242D pinout is documented in the Texas Instruments SN74LS242D datasheet. Use the package-pin table and functional diagram together when assigning the 14 SOIC pins to transceiver data inputs, outputs, enables, direction controls, power, and ground. The public search data confirms the 14-SOIC package but does not reproduce the individual pin names, so the datasheet is the required design reference.
What are the key specifications of SN74LS242D that engineers should know?
The principal confirmed specifications are a quadruple bus-transceiver configuration, four transceiver elements, a 14-pin SOIC package, and an operating range of 0°C to 70°C. The Texas Instruments SN74LS242D datasheet should also be used for supply voltage, propagation delay, enable timing, input thresholds, output levels, and current ratings before the device is approved for a new design.
Can the SN74LS242D be used for bidirectional data transfer?
Yes, the SN74LS242D can support bidirectional bus-interface implementations because its transceiver sections combine driver and receiver functions. The surrounding circuitry must control each channel's direction and ensure that connected devices do not drive a bus simultaneously in opposing directions. Verify the exact direction and enable truth table in the Texas Instruments SN74LS242D datasheet for the selected board configuration.
Where to buy SN74LS242D online?
Use the Request a Quote form on this page to request SN74LS242D availability, current commercial terms, and order quantities. The form connects buyers with the appropriate supply channel without requiring price figures to be repeated in static product text. Confirm the exact SN74LS242D ordering code, 14-pin SOIC package, and delivery requirements before releasing a purchase order.
What is the price of SN74LS242D?
The current SN74LS242D commercial price should be requested through the Request a Quote form on this page. Pricing can vary with quantity, packaging, inventory, and market conditions, so a static unit figure may not reflect a purchasable offer. Submit the required quantity and target package information with the quote request for a current response.
What is the lead time for SN74LS242D?
The current SN74LS242D lead time should be confirmed through the Request a Quote form on this page. Lead time depends on available inventory, the requested quantity, and the exact package and shipping requirements. For production planning, include the required delivery date and stocking policy in the request so the supply response reflects the actual procurement need.
Is SN74LS242D in stock?
Stock status for the exact SN74LS242D ordering code should be checked through the Request a Quote form on this page. A request can specify the quantity and package required, allowing the supply channel to confirm current availability rather than presenting an unverified stock claim. For production builds, request lot traceability and delivery scheduling at the same time.
SN74LS242D vs 74LS242D - which is better?
The SN74LS242D and 74LS242D listings refer to the same functional family and may differ only in manufacturer ordering convention, but a valid substitution must still be checked for manufacturer, package, pinout, electrical limits, and lifecycle status. The SN74LS242D is specifically identified as a Texas Instruments 14-SOIC quadruple bus transceiver with a 0°C-to-70°C operating range.
When should I choose the SN74LS242D over another 74LS bus transceiver?
Choose the SN74LS242D when the design needs four bus-transceiver sections, a 14-pin SOIC footprint, and a commercial operating range of 0°C to 70°C. It is preferable when the PCB and bill of materials are already committed to the SN74LS242D ordering code. A different transceiver should be selected only after matching enable timing, direction logic, supply voltage, and propagation delay.
What is the best drop-in replacement for SN74LS242D?
No independently verified drop-in replacement is established for the SN74LS242D in the available cross-reference information. A replacement must use the same 14-pin SOIC footprint, preserve all enable and direction functions, and meet the original electrical and timing requirements. Do not substitute a 14-pin plastic DIP or a different bus-transceiver function based only on the 74LS family name.
What can replace SN74LS242D?
The SN74LS242D can be replaced only by a part with a verified 14-SOIC footprint, identical pin functions, compatible supply voltage, equivalent enable and direction timing, and acceptable propagation delay. The available cross-reference listings do not identify a confirmed drop-in substitute. For a redesign, compare a non-inverting or inverting transceiver family against the complete truth table rather than relying on the number of channels alone.

נתוני עזר הנדסיים עבור SN74LS242D — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SN74LS242D when a design requires four TTL-compatible bus-transceiver sections in a single 14-pin SOIC package and operates within the confirmed 0°C-to-70°C range. It is particularly suitable for legacy digital interfaces, general-purpose bus buffering, test equipment, instrumentation, and commercial industrial control products where through-hole assembly is preferred. The main selection checks are the enable and direction truth table, supply-voltage compatibility, propagation delay, output-current capability, and whether connected devices can be disabled safely. Do not select it for extended-temperature, automotive, high-speed differential, or precision analog applications without confirming additional requirements. A replacement must preserve the 14-SOIC footprint and exact pin functions. Parts with different enable logic, inverted data behavior, altered timing, or another package should be treated as redesign candidates rather than drop-in substitutions.

השוואה עם חלופות

פרמטר מוצר זה
Device Type Quad bus transceiver
Number of Elements 4
Logic Family 74LS
Package 14-pin SOIC
Brand Texas Instruments
Operating Temperature Range 0°C to 70°C

הערות תכנון

Prevent bus contention by keeping every transceiver channel disabled until all devices connected to the bus have reached a defined output state. Two outputs driving opposite logic levels through a low-impedance path can produce excessive current, undefined voltage, and possible component damage. Use the manufacturer's enable and direction truth table, hold the device inactive during reset, and ensure external devices provide a defined disable state before the transceiver becomes active.

Place the transceiver close to the digital interface it serves and keep data and direction traces short enough to limit propagation delay, ringing, and susceptibility to crosstalk. Provide a continuous ground plane and follow the datasheet's supply-bypassing recommendations. Because the SN74LS242D is a 14-pin SOIC, verify the PCB's through-hole pad pattern, pin-one orientation, and component clearance against the actual package drawing before releasing the board layout.

Treat each transceiver channel as a bidirectional logic connection rather than two independent point-to-point links. Direction-control traces should not be allowed to change while the corresponding outputs are actively driving. Check propagation-delay and enable timing from the datasheet against the clocking rate of the connected system, and add termination or series damping only when required by the complete board topology and edge rate.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No compliance declarations were identified in the available product and distributor information. AEC-Q100 is not applicable to this commercial-temperature 74LS logic device.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SN74LS242D datasheet SN74LS242D pinout SN74LS242D datasheet pdf SN74LS242D specifications SN74LS242D equivalent SN74LS242D replacement SN74LS242D cross reference SN74LS242D price SN74LS242D stock Texas Instruments SN74LS242D SN74LS242D SOIC-14 footprint SN74LS242D bus transceiver application

רכיבים ומונחים קשורים

Texas Instruments SN74LS242D SN74LS242 74LS242D quad bus transceiver logic transceiver logic IC semiconductor 74LS logic family TTL-compatible logic bidirectional bus bus buffering direction control enable control digital signal interface data acquisition industrial control test and measurement computer peripheral instrumentation 14-pin SOIC SOIC package through-hole technology commercial temperature grade bus contention
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר