Microchip Technology

MCP602T-E/ST - Dual 2.8MHz RRIO Op Amp | Microchip

MPN: MCP602T-E/ST ✓ פעיל
<2 mV Vdss 230 uA Id 8-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

MCP602T-E/ST סקירה

Microchip Technology MCP602T-E/ST is a dual operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and an input offset voltage below 2 mV, packaged in an 8-pin TSSOP. It operates from a single supply of 2.7 V to 6.0 V and provides rail-to-rail output swing, making it suitable for compact, low-power analog signal-conditioning circuits.

An operational amplifier, or op amp, is a voltage-controlled differential amplifier that uses feedback to shape gain, filtering, buffering, and signal conversion. The MCP602 family combines two amplifiers in one package, placing it in the hierarchy of dual CMOS op amps, analog amplifiers, and general-purpose analog semiconductors. Its low operating current supports battery-powered equipment, while the rail-to-rail output stage improves dynamic range in low-voltage systems.

Key characteristics include a 2.8 MHz gain-bandwidth product, less than 2 mV input offset voltage, and 230 uA typical operating current. The 2.7 V to 6.0 V single-supply range accommodates common 3.3 V and 5 V rails. Rail-to-rail output swing allows the output to approach the supply limits more closely than a conventional fixed-output amplifier, although designers should account for the output limits at the selected voltage and load.

Microchip's advanced CMOS process supports low bias current, high open-loop gain, and low-power operation in the MCP602 family. Each amplifier is independently usable, allowing the two channels to perform different functions such as signal amplification and active filtering. Noise-gain and feedback networks determine the closed-loop bandwidth, while input bias current, common-mode range, output swing, and stability constrain the practical application.

Typical uses include portable sensor interfaces, low-speed data acquisition, analog filtering, buffer stages, and general-purpose embedded signal conditioning. The dual configuration is especially useful when a design needs matched channel functions, such as differential sensing or cascaded filtering. A 5 V application still requires verification of input and output ranges at the actual signal amplitude and load.

The primary design consideration is power-rail headroom. Input signals must remain inside the amplifier's common-mode range, and outputs must remain within the usable output swing. Place bypass capacitors close to the supply pins, use short feedback paths, and avoid capacitive loading that can reduce stability. Confirm the gain-bandwidth margin for the selected closed-loop gain.

This product overview combines the manufacturer device specifications, package identification, cross-reference options, application guidance, and practical design notes needed to evaluate the MCP602T-E/ST for low-voltage analog systems.

חלופות תחליף ישיר עבור MCP602T-E/ST — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MCP602T-E/ST (אותו גורם צורה וטביעת רגל) — שונים ב Package, Gain-Bandwidth Product, Package Width, Amplifier Type, Input Offset Voltage.

Microchip Technology
Package: 8-lead TSSOP
Package Width: 4.40 mm
Amplifier Type: Dual operational amplifier
Microchip Technology
Package: 8-TSSOP
Gain-Bandwidth Product: 2.8 MHz typical
Package Width: 4.40 mm

MCP602T-I/ST

✅ Drop-In
📦 8-pin TSSOP
Same 2.8 MHz bandwidth, 230 uA typical current, and <2 mV offset; 0 V, 0 MHz, and 0 uA core electrical differences, with only the temperature-grade suffix differing.

📋 חלופה להתייחסות (לא בקטלוג)

MCP602-E/ST

✅ Drop-In
Microchip Technology
📦 8-pin TSSOP
Dual operational amplifier · 2 channels · CMOS · 2.8 MHz · 230 uA · <2 mV · Rail-to-rail · 2.7 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP602-I/ST

✅ Drop-In
Microchip Technology
📦 8-pin TSSOP
2 channels · CMOS operational amplifier · 2.7 V to 5.5 V · 2.8 MHz typical · 230 uA typical per amplifier · Less than 2 mV · 60 uA maximum · 90 dB typical

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP6022-E/ST

✅ Drop-In
📦 8-pin TSSOP
Related dual rail-to-rail family with the same 8-pin TSSOP interface; channel-specific bandwidth and offset differences are bounded by 30% for the cross-reference rating.

📋 חלופה להתייחסות (לא בקטלוג)

MCP6024-E/ST

✅ Drop-In
📦 8-pin TSSOP
Related dual rail-to-rail family with the same 8-pin TSSOP interface; performance differences are bounded by 30% for the cross-reference rating, so closed-loop stability must be rechecked.

📋 חלופה להתייחסות (לא בקטלוג)

MCP602T-E/ST דירוגים מרביים ומאפיינים חשמליים

Amplifier Type General-purpose CMOS operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Input Offset Voltage <2 mV
Supply Voltage Range 2.7 V to 6.0 V
Output Swing Rail-to-rail
מארז 8-pin TSSOP
Package Width 4.4 mm
סוג הרכבה Surface mount
Process Technology Advanced CMOS

תצורת פינים של MCP602T-E/ST

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
פין 1 OUTA — Amplifier A output
פין 2 IN A- — Inverting input for amplifier A
פין 3 IN A+ — Non-inverting input for amplifier A
פין 4 V- — Negative supply or ground connection
פין 5 IN B+ — Non-inverting input for amplifier B
פין 6 IN B- — Inverting input for amplifier B
פין 7 OUTB — Amplifier B output
פין 8 V+ — Positive supply connection

יישומים טיפוסיים

MCP602T-E/ST מתאים עבור 6 יישוםs: Battery-Powered Sensor Signal Conditioning, Portable Medical Sensor Interface, Industrial Low-Level Signal Amplification, Active Filters and Audio-Style Buffers, Portable Data-Acquisition Front End, IoT Sensor Node Conditioning.

🔋

Battery-Powered Sensor Signal Conditioning

The MCP602T-E/ST fits battery-powered sensor front ends because its 2.7 V minimum supply and 230 uA typical operating current suit low-energy systems. Place one channel in a non-inverting configuration and the other in an inverting configuration when the sensor output requires referenced amplification. The 2.8 MHz gain-bandwidth product provides more bandwidth than many low-frequency sensors require, while the less-than-2 mV input offset limits signal error. Confirm the sensor output range against the amplifier's common-mode limits and check whether the total battery load is dominated by sensor excitation or external circuitry.

💊

Portable Medical Sensor Interface

The MCP602T-E/ST can condition low-level signals from portable medical sensors where low power, small package size, and rail-to-rail output are useful. Its 230 uA typical operating current limits amplifier overhead, and the less-than-2 mV input offset reduces error around small sensor outputs. Two independent channels can amplify a differential sensor signal or provide gain and buffering in separate stages. The 2.7 V to 6.0 V supply range supports compact battery rails, although safety-critical designs require the appropriate medical qualification, protection, isolation, and validation beyond the amplifier's core electrical specifications.

🏭

Industrial Low-Level Signal Amplification

The MCP602T-E/ST is suitable for industrial measurement circuits that amplify low-level sensor or transducer signals without requiring a high-speed amplifier. The less-than-2 mV input offset and 2.8 MHz gain-bandwidth product support precision gain stages around 1 kHz to tens of kilohertz, depending on closed-loop gain. Its dual channel permits one stage for excitation or filtering and another for output buffering. The 230 uA typical operating current benefits low-power acquisition nodes, but grounding, input protection, supply filtering, and calibration determine overall measurement accuracy in industrial environments.

🎧

Active Filters and Audio-Style Buffers

The MCP602T-E/ST can implement active low-pass, high-pass, or notch-filter stages where low power and rail-to-rail output are more important than very high bandwidth. The 2.8 MHz gain-bandwidth product supports moderate-frequency filters, and the dual package lets one channel perform filtering while the other buffers the source or output. Use low-noise resistor and capacitor selections when component values become large relative to the 230 uA bias-current contribution. Verify the output swing at the worst-case load and confirm stability with the selected feedback network and any capacitive input or output loading.

🖥️

Portable Data-Acquisition Front End

The MCP602T-E/ST fits a compact data-acquisition front end that must amplify sensor outputs before conversion. Its 2.8 MHz gain-bandwidth product preserves signal amplitude across moderate-frequency channels, while the 2.7 V to 6.0 V range supports common portable supply rails. Two channels allow simultaneous gain and driver functions without increasing the number of amplifier packages. Design the input network to avoid excessive capacitance, keep feedback traces short, and account for the less-than-2 mV offset when calculating accuracy. Rail-to-rail output improves range utilization but does not eliminate output-swing restrictions.

🧩

IoT Sensor Node Conditioning

The MCP602T-E/ST is appropriate for IoT sensor nodes that condition analog measurements before an embedded ADC or radio interface. Its 230 uA typical operating current and single 2.7 V to 6.0 V supply simplify power budgeting in compact devices. The two amplifier channels can implement a gain stage and an active filter, while the 2.8 MHz gain-bandwidth product is sufficient for many slow environmental sensors. Keep the analog path physically separated from switching and radio circuitry, bypass the supply at the pins, and verify the common-mode range at startup because sensor outputs may move close to either rail.

סיכום מוצרים מומלצים

MCP602T-I/ST Same-family dual amplifier for alternate temperature-grade configurations בשימוש ב-: Battery-Powered Sensor Signal Conditioning, Industrial Low-Level Signal Amplification, Portable Data-Acquisition Front End MCP6022-E/ST Related dual rail-to-rail amplifier option בשימוש ב-: Battery-Powered Sensor Signal Conditioning, Industrial Low-Level Signal Amplification, IoT Sensor Node Conditioning MCP602-E/ST Microchip Technology בשימוש ב-: Portable Medical Sensor Interface, Active Filters and Audio-Style Buffers, IoT Sensor Node Conditioning MCP6024-E/ST Related dual rail-to-rail amplifier family בשימוש ב-: Portable Medical Sensor Interface, Active Filters and Audio-Style Buffers MCP602-I/ST Microchip Technology בשימוש ב-: Portable Data-Acquisition Front End
What is the operating voltage range of MCP602T-E/ST?
The MCP602T-E/ST operates from a single supply of 2.7 V to 6.0 V. According to the Microchip MCP602 product information, this range supports both 3.3 V and 5 V analog systems. The dual amplifier can operate from the same supply, although each channel's input voltage must remain inside the specified common-mode range.
What are the key specifications of MCP602T-E/ST that engineers should know?
The MCP602T-E/ST combines two CMOS operational amplifiers in an 8-pin TSSOP, with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, input offset voltage below 2 mV, and rail-to-rail output. The manufacturer identifies the MCP602 family as a general-purpose, low-power amplifier suitable for single-supply operation from 2.7 V to 6.0 V.
Where can I download the MCP602T-E/ST datasheet PDF?
The official MCP602T-E/ST technical information is available through the Microchip MCP602 product page, which links to the manufacturer documentation. The same MPN is also identified on datasheet repositories as an 8-pin TSSOP dual amplifier. Use the manufacturer documentation for final pin, electrical-limit, and application details.
Where can I find the MCP602T-E/ST pinout?
The MCP602T-E/ST uses an 8-pin TSSOP, and its complete pin assignment appears in the MCP602 manufacturer documentation. Pins 1 through 4 form the first amplifier's output and inputs with its ground connection, while pins 5 through 8 provide the second amplifier's inputs, output, and supply connection. Use the pin-description table when assigning PCB tracks.
Is MCP602T-E/ST suitable for battery-powered sensor interfaces?
Yes, the MCP602T-E/ST is suitable for battery-powered sensor interfaces because its typical operating current is 230 uA and its single-supply range begins at 2.7 V. The 2.8 MHz gain-bandwidth product also accommodates low-bandwidth sensing, filtering, and buffering. Sensor excitation current, leakage, and total system demand must still be evaluated separately.
What is the gain-bandwidth product of MCP602T-E/ST?
The MCP602T-E/ST has a 2.8 MHz gain-bandwidth product. According to the Microchip MCP602 product information, this value determines the approximate closed-loop bandwidth when operating at unity gain. A higher closed-loop gain reduces usable bandwidth, so applications requiring faster settling need to account for the selected feedback network.
MCP602T-E/ST vs MCP602T-I/ST: which temperature grade should I choose?
The two MCP602 dual amplifiers use the same core device family and 8-pin TSSOP interface, but their suffix codes identify different temperature grades. The MCP602T-E/ST is the E-grade ordering option, while MCP602T-I/ST is the I-grade option. Choose according to the required ambient temperature and qualification requirements in the manufacturer ordering table.
What is the difference between MCP602T-E/ST and MCP602-E/ST?
The MCP602T-E/ST and MCP602-E/ST belong to the same MCP602 family and use the 8-pin TSSOP package, but their ordering suffixes distinguish their configurations or grades. The core 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and less-than-2 mV offset family characteristics remain associated with MCP602. Confirm the exact suffix against the ordering table.
When should I choose MCP602T-E/ST over MCP6022-E/ST?
Choose the MCP602T-E/ST when a 2.8 MHz general-purpose amplifier with less-than-2 mV input offset and 230 uA typical operating current is sufficient. MCP6022-E/ST belongs to a related dual rail-to-rail amplifier family but may offer different channel or performance characteristics. Select it only after comparing the full electrical limits and stability requirements.
Is MCP602T-E/ST suitable for active filtering and signal conditioning?
Yes, the MCP602T-E/ST is appropriate for active filtering and signal conditioning at frequencies compatible with its 2.8 MHz gain-bandwidth product. Its dual-channel configuration permits two related filter sections or one filter plus a buffer. Check the closed-loop gain, output loading, common-mode limits, and required phase margin before finalizing the design.
What can replace MCP602T-E/ST?
The MCP602T-E/ST can be replaced by a pin-compatible device only after verifying package, pin function, supply range, offset voltage, bandwidth, output swing, and temperature grade. Same-family options include MCP602-E/ST, MCP602-I/ST, and MCP602T-I/ST, while MCP6022-E/ST and MCP6024-E/ST require closer electrical review. An identical package alone does not guarantee equivalent performance.
Where to buy MCP602T-E/ST online?
Use the Request a Quote form on this page to inquire about MCP602T-E/ST availability, lot handling, and order quantities. The form is the appropriate channel for obtaining a current quotation and confirming lead time for the exact 8-pin TSSOP ordering code without relying on an obsolete or mismatched catalog entry.
What is the lead time for MCP602T-E/ST?
Lead time depends on current manufacturer inventory, order quantity, and the exact suffix. Request a current lead-time confirmation through the Request a Quote form on this page and include the required quantity, date code criteria, and shipment destination. The manufacturer product page can be used to verify that MCP602 remains a current family.
Is MCP602T-E/ST in stock?
Current inventory should be confirmed through the Request a Quote form on this page. The form accepts the exact MCP602T-E/ST ordering code and requested quantity so XAIPART can check matching supply. Avoid substituting a related MCP602 suffix because temperature grade, qualification, and ordering options can differ.
How much does MCP602T-E/ST cost?
Use the Request a Quote form on this page for the current MCP602T-E/ST quotation and quantity breaks. Commercial terms can vary with order quantity, date code, packaging, and delivery requirements, so a static unit figure would not reliably represent the current offer. Provide the required quantity and packaging preference with the inquiry.
What is the best cross-brand equivalent for MCP602T-E/ST?
A cross-brand equivalent should be selected only after its 8-pin TSSOP pinout, 2.7 V to 6.0 V supply compatibility, offset voltage, gain-bandwidth product, output swing, and temperature grade are verified against MCP602T-E/ST. The available cross-reference results establish the target family's parameters but do not establish a cross-brand drop-in substitute, so a specific competing MPN would require separate validation.

נתוני עזר הנדסיים עבור MCP602T-E/ST — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the MCP602T-E/ST when a design needs two low-power, rail-to-rail CMOS amplifiers, a 2.8 MHz gain-bandwidth product, and a 2.7 V to 6.0 V supply range. It is a strong fit for portable sensor interfaces, low-speed data acquisition, active filtering, and embedded signal conditioning where the less-than-2 mV offset and 230 uA typical current are important. Select MCP602T-I/ST or MCP602-I/ST when their specified grade better matches the deployment while retaining the same core performance. Consider MCP602-E/ST when its suffix configuration satisfies the design without the T-E ordering option. Use MCP6022-E/ST or MCP6024-E/ST only after confirming their channel-specific bandwidth, offset, current, and stability requirements; they are related family options rather than automatic identical substitutes. No cross-brand drop-in replacement is established because package equality alone does not guarantee equivalent common-mode range, output behavior, or pin-level compatibility.

השוואה עם חלופות

פרמטר מוצר זה MCP602T-I/ST MCP602-E/ST MCP602-I/ST MCP6022-E/ST MCP6024-E/ST
Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Number of Channels 2 2 2 2 2 2
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Ordering Suffix T-E/ST T-I/ST -E/ST -I/ST 2-E/ST 4-E/ST

מבדילים עיקריים

  • Low operating current for a 2.8 MHz dual amplifier (לעומתMCP6022-E/ST)
  • Two rail-to-rail amplifiers in one 8-pin TSSOP (לעומתMCP6024-E/ST)
  • Matched core specifications within the MCP602 family (לעומתMCP602T-I/ST)

הערות תכנון

The MCP602 family operates from 2.7 V to 6.0 V with 230 uA typical operating current. Place the supply bypass capacitor close to pin 8 and connect pin 4 to the circuit ground plane with a short return path. This is especially important in portable and IoT designs because long supply traces add resistance and can couple noise into the amplifier inputs. Confirm total current under the maximum expected load because the 230 uA figure represents typical amplifier operating current.

Keep the two amplifier inputs, feedback components, and output routes compact. Place feedback resistors close to the relevant inverting-input pins to minimize parasitic capacitance, which can affect stability and bandwidth. The MCP602's 2.8 MHz gain-bandwidth product provides substantial margin in many low-frequency circuits, but high closed-loop gain or capacitive loading still requires a stability check.

Do not assume rail-to-rail output means the output can reach either supply rail under every load. Check the output-voltage limits, input common-mode range, output-current capability, and temperature range in the manufacturer datasheet. Keep the two channels electrically independent unless the circuit intentionally ties them together, and verify that each selected suffix preserves the required temperature grade and pin configuration.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance status must be confirmed for the exact MCP602T-E/ST ordering code using the manufacturer's product page or declaration documentation.

חיפושים קשורים

mcp602t i sn datasheet MCP602T-E/ST datasheet MCP602T-E/ST datasheet pdf MCP602T-E/ST pinout MCP602T-E/ST equivalent MCP602T-E/ST replacement MCP602T-E/ST price MCP602T-E/ST stock Microchip MCP602T-E/ST MCP602 2.8MHz dual amplifier MCP602T-E/ST vs MCP602T-I/ST MCP602T-E/ST TSSOP footprint

רכיבים ומונחים קשורים

Microchip Technology MCP602T-E/ST MCP602 MCP602T-I/ST MCP602-E/ST MCP602-I/ST MCP6022-E/ST MCP6024-E/ST dual operational amplifier CMOS op amp general-purpose amplifier analog amplifier semiconductor rail-to-rail output gain-bandwidth product input offset voltage operating current common-mode input range 8-pin TSSOP TSSOP package family surface-mount package single-supply operation sensor signal conditioning active filtering industrial instrumentation
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר