Texas Instruments

MSP430F2101TPW - 16MHz Ultra-Low-Power MCU | Texas Instruments

MPN: MSP430F2101TPW ✓ פעיל
1.8 V to 3.6 V Vdss 250 µA at 1 MHz and 2.2 V Id 20-pin TSSOP (PW) Package 16 MHz Speed 1 KB Memory
כמות הזמנה מינימלית: 1 |

MSP430F2101TPW סקירה

Texas Instruments MSP430F2101TPW is an ultra-low-power 16-bit mixed-signal microcontroller with a 16 MHz MSP430 CPU, 1 KB Flash, 128 B SRAM, 16 GPIO pins, a 16-bit timer, and an analog comparator, packaged in a 20-pin TSSOP. It operates from a 1.8 V to 3.6 V supply, making it suitable for compact battery-powered measurement and sensing equipment.

An ultra-low-power mixed-signal microcontroller combines a low-power digital processing core with analog peripherals capable of measuring or comparing voltage signals. The MSP430F2101 belongs to the MSP430 family, where its 16-bit RISC CPU, 16-bit registers, and low-power operating modes support portable measurement systems that capture analog signals, convert them into digital information, and process or transmit the results.

Key features include a 16 MHz maximum clock speed, 1 KB of Flash memory, and 128 B of SRAM. The device has 16 I/O pins, a built-in 16-bit timer, and a versatile analog comparator. Low-power figures include 250 µA active current at 1 MHz and 2.2 V, 0.7 µA in standby mode, and 0.1 µA in off mode with RAM retention. Wake-up from standby takes less than 1 µs.

The MSP430 architecture uses a 16-bit RISC CPU with 16-bit registers and supports several low-power operating modes. Its fast standby wake-up allows a system to remain in a low-consumption state between measurements and quickly resume processing when a sensor, timer, or comparator event requires attention. The mixed-signal resources reduce the need for external analog and timing components in compact designs.

Typical applications include portable sensor systems, battery-powered instrumentation, low-level signal acquisition, threshold detection, and host-connected measurement equipment. The 20-pin TSSOP package also supports mixed-signal products that require analog comparison and timed control while keeping the component count low. Its 1.8 V minimum operating voltage supports compatibility with modern low-energy sensor and embedded-control systems.

PCB design should place decoupling capacitance close to the supply pins, route sensitive analog inputs away from fast digital switching paths, and preserve the recommended grounding and layout geometry from the manufacturer datasheet. Firmware should also use the MSP430 low-power modes deliberately, because sleep timing and retained peripheral state directly influence the achievable standby and off-mode current.

This product page combines the MSP430F2101TPW specifications, package details, application guidance, and verified same-family replacement options into an engineering-focused reference. It helps designers evaluate the 16 MHz mixed-signal MCU for low-power sensor, timer, comparator, and portable measurement designs without confusing pin-compatible options with unrelated microcontrollers.

חלופות תחליף ישיר עבור MSP430F2101TPW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MSP430F2101TPW (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory, SRAM, Product Type, Package, Timer.

Texas Instruments
Product Type: Mixed-signal ultra-low-power microcontroller
Timer: 1 integrated 16-bit timer
השווה עם MSP430F2101TPW →
Texas Instruments
Flash Memory: 2 KB
SRAM: 128 bytes
Product Type: 16-bit mixed-signal microcontroller
השווה עם MSP430F2101TPW →
Texas Instruments
Flash Memory: 4 KB (4 K x 8)
SRAM: 256 B
Product Type: 16-bit ultra-low-power mixed-signal microcontroller
השווה עם MSP430F2101TPW →
Texas Instruments
Flash Memory: 4 KB
SRAM: 256 bytes
Product Type: 16-bit mixed-signal microcontroller (MCU)
השווה עם MSP430F2101TPW →

MSP430F2101IPW

✅ Drop-In
Texas Instruments
📦 20-pin TSSOP (PW)
16-bit RISC · 16 MHz · 1 KB · 128 B · 16 pins · 1 integrated 16-bit timer · 1 integrated comparator · 3.3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F2121TPW

✅ Drop-In
Texas Instruments
📦 20-pin TSSOP (PW)
16-bit mixed-signal microcontroller (MCU) · 16 MHz · 16-bit RISC · 16-bit · 4 KB · 256 bytes · 1.8 V to 3.6 V · -40°C to +105°C

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F2121IPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 20-pin TSSOP (PW)
16-bit ultra-low-power mixed-signal microcontroller · 16-bit RISC · 16 MHz · 4 KB (4 K x 8) · 256 B · 16 bit · 62.5 ns · Integrated

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F2111TPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 20-pin TSSOP (PW)
16-bit mixed-signal microcontroller · MSP430 RISC · 16 MHz · 2 KB · 128 bytes · 16 pins · 1 integrated 16-bit timer · 1 integrated analog comparator

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F2111IPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 20-pin TSSOP (PW)
Same MSP430x21x1 mixed-signal family and 20-pin PW footprint, with a different memory configuration and orderable suffix.

📋 חלופה להתייחסות (לא בקטלוג)

MSP430F2101TPW דירוגים מרביים ומאפיינים חשמליים

CPU Architecture 16-bit RISC
תדר שעון מקסימלי 16 MHz
Flash Memory 1 KB
SRAM 128 B
Supply Voltage Range 1.8 V to 3.6 V
Active Current 250 µA at 1 MHz and 2.2 V
Standby Current 0.7 µA
Off Current 0.1 µA with RAM retention
Standby Wake-Up Time Less than 1 µs
GPIO Count 16 pins
Timer 16-bit timer
Analog Comparator 1 integrated analog comparator
מארז 20-pin TSSOP (PW)
Package Width 4.40 mm
Package Length 0.173 in
סוג הרכבה Surface mount

מדריך תצורת פינים של MSP430F2101TPW 0.173 in

תצורת פינים עבור MSP430F2101TPW (מארזת 0.173 in). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 0.173 in עבור MSP430F2101TPW

אין נתוני פריסת פינים מפורטים עבור MSP430F2101TPW.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MSP430F2101TPW מתאים עבור 6 יישוםs: Portable Sensor Measurement, Battery-Powered Industrial Monitoring, Threshold Detection and Control, Compact Data-Acquisition Module, Low-Power Utility Metering, Portable Medical Sensor Interface.

🧩

Portable Sensor Measurement

The MSP430F2101TPW fits portable sensor nodes that sample low-level signals, perform threshold decisions, and remain inactive between events. Its 16 MHz MSP430 CPU provides processing capacity for digital filtering and control, while the 16-bit timer supports periodic sampling. The low-power specification of 250 µA active at 1 MHz and 2.2 V, 0.7 µA standby, and 0.1 µA off with RAM retention helps reduce battery load. Its 16 GPIO pins and analog comparator permit sensor interfaces and local threshold detection without requiring a separate peripheral controller.

🏭

Battery-Powered Industrial Monitoring

The MSP430F2101TPW is appropriate for isolated industrial monitoring equipment that periodically measures a sensor and reports status. Its 1.8 V to 3.6 V operating range supports low-energy supply rails, and standby wake-up in less than 1 µs enables rapid response to timer or comparator events. The 16-bit timer can establish measurement intervals, while the analog comparator can detect threshold crossings. Firmware can use the low-power modes between samples, reducing the energy cost of maintaining an always-active acquisition system in factory or field instrumentation.

🔧

Threshold Detection and Control

The MSP430F2101TPW can act as a compact threshold-detection controller by using its integrated analog comparator to monitor a sensor signal. The 16 GPIO pins support digital inputs, alarm outputs, and external control functions, while the 16-bit timer provides repeatable event timing. With a 16 MHz CPU, the device can execute filtering, hysteresis, debounce, and communication logic after a comparator event. Its standby current of 0.7 µA helps preserve battery life while the controller waits continuously for a threshold crossing.

🖥️

Compact Data-Acquisition Module

The MSP430F2101TPW is suitable for compact data-acquisition modules that must acquire, validate, and forward measurements to a host. The 16-bit timer establishes accurate sampling intervals, the comparator supports range or threshold supervision, and the 16 GPIO pins provide digital interfaces. Although the 1 KB Flash and 128 B SRAM are modest, they are practical for small firmware images and short buffering workloads. The 20-pin TSSOP keeps the footprint compact, and the less-than-1-µs standby wake-up supports rapid duty-cycled acquisition sequences.

⚡

Low-Power Utility Metering

The MSP430F2101TPW can serve as the control core of a low-power utility or energy meter with limited computation requirements. Its 16-bit CPU can calculate consumption data, the timer can generate measurement windows, and the GPIO pins can support pulse, alarm, or status inputs. The microcontroller operates from a supply as low as 1.8 V and can remain in standby at 0.7 µA between measurement intervals. This makes the device useful for compact metering modules where continuous operation would waste energy, provided the selected memory variant satisfies the code and data-storage requirements.

💊

Portable Medical Sensor Interface

The MSP430F2101TPW can support a portable biomedical sensor interface when the design requires local signal supervision, timing, and control. The analog comparator can perform fast threshold detection, the 16-bit timer can coordinate sampling, and the 16 GPIO pins can connect sensor enables, status indicators, and digital controls. Its low-power operating modes are valuable in wearable or battery-operated monitoring equipment because standby current is 0.7 µA and wake-up is less than 1 µs. Clinical designs still require appropriate isolation, protection, accuracy validation, and regulatory review beyond the MCU specification.

What is the MSP430F2101TPW?
The MSP430F2101TPW is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz MSP430 CPU, 1 KB Flash memory, 128 B SRAM, 16 I/O pins, a 16-bit timer, and an analog comparator. According to the Texas Instruments MSP430F2101 product page and manufacturer datasheet, it is packaged in a 20-pin TSSOP and operates from 1.8 V to 3.6 V.
What are the key specifications of MSP430F2101TPW that engineers should know?
The MSP430F2101TPW combines a 16 MHz 16-bit RISC core with 1 KB Flash, 128 B SRAM, 16 GPIO pins, one 16-bit timer, and an analog comparator. According to the Texas Instruments manufacturer datasheet, its supply range is 1.8 V to 3.6 V, active current is 250 µA at 1 MHz and 2.2 V, standby current is 0.7 µA, and standby wake-up is less than 1 µs.
Where can I download the MSP430F2101TPW datasheet PDF?
The MSP430F2101TPW datasheet is available through the official Texas Instruments MSP430F2101 product page at https://www.ti.com/product/MSP430F2101. Use the datasheet link on that page for the manufacturer PDF, ordering information, pin descriptions, electrical characteristics, and recommended application details.
Where can I find the MSP430F2101TPW pinout and package information?
The MSP430F2101TPW uses a 20-pin TSSOP package with the TI PW package designation. Use the pin-description table and package drawings in the Texas Instruments manufacturer datasheet when assigning PCB nets, particularly for the supply, ground, reset, programming, and mixed-signal pins.
What is the power consumption of the MSP430F2101TPW?
The MSP430F2101TPW consumes 250 µA in active mode at a 1 MHz clock and 2.2 V supply, 0.7 µA in standby mode, and 0.1 µA in off mode with RAM retention. According to the Texas Instruments manufacturer datasheet, standby wake-up takes less than 1 µs, supporting short measurement intervals and duty-cycled battery-powered operation.
Is the MSP430F2101TPW suitable for battery-powered sensor systems?
The MSP430F2101TPW is suitable for battery-powered sensor systems because its active current can be 250 µA at 1 MHz and 2.2 V, while standby current is 0.7 µA. Its 16 GPIO pins, analog comparator, and 16-bit timer support sensor monitoring, threshold decisions, and periodic sampling without requiring a separate timing controller.
What can replace the MSP430F2101TPW?
The MSP430F2101IPW is a same-family pin-compatible option because it retains the MSP430F2101 device configuration in a 20-pin PW package and differs primarily in the orderable suffix. The MSP430F2121TPW and MSP430F2121IPW are also pin-compatible MSP430x21x1-family choices, but they provide different memory capacity, so firmware and memory requirements must be reviewed before substitution.
Is the MSP430F2101TPW the same as the MSP430F2101IPW?
The MSP430F2101TPW and MSP430F2101IPW are closely related MSP430F2101 variants in the 20-pin PW package, but their orderable suffixes must be checked against the required temperature and packaging conditions. According to the Texas Instruments ordering information, both belong to the MSP430F2101 family; use the manufacturer part-details table for the exact grade and shipment form.
What is the best drop-in replacement for MSP430F2101TPW?
The MSP430F2101IPW is the closest same-family drop-in candidate because it uses the same MSP430F2101 configuration and 20-pin PW package while changing the orderable suffix. Confirm the required temperature range, grade, and reel or tray shipment form in the Texas Instruments part-details table before approving the substitution.
When should I choose MSP430F2101TPW over MSP430F2121TPW?
Choose MSP430F2101TPW when the design requires the MSP430F2101 configuration with 1 KB Flash and 128 B SRAM and does not need the additional memory available in MSP430F2121TPW. MSP430F2121TPW may be preferable for more firmware or data-storage headroom, provided its memory changes and supply requirements are compatible with the application.
Is MSP430F2101TPW suitable for analog signal measurement applications?
The MSP430F2101TPW is suitable for basic analog measurement and threshold-detection applications because it includes a versatile analog comparator alongside a 16-bit timer and 16 I/O pins. According to the Texas Instruments product page, typical uses include capturing analog signals, converting them to digital values, and processing or transmitting the results to a host system.
MSP430F2101TPW vs MSP430F2121TPW — which is better for sensor systems?
MSP430F2101TPW is better when the sensor node fits within 1 KB Flash and 128 B SRAM, while MSP430F2121TPW is better when the firmware or data buffer needs additional memory. Both belong to the MSP430x21x1 mixed-signal family and use the 20-pin PW package, but the final choice should follow memory sizing and the exact ordering conditions.
Where can I buy MSP430F2101TPW and check its lead time?
Use the Request a Quote form on this page to request MSP430F2101TPW pricing, current stock, minimum order quantity, and production lead time. Texas Instruments identifies the device as an MSP430F2101 in a 20-pin TSSOP package, and the manufacturer part-details page provides ordering options and qualification information.
What is the price of MSP430F2101TPW?
The current unit price for MSP430F2101TPW should be obtained through the Request a Quote form on this page because quote-based commercial terms and availability can change. The manufacturer identifies MSP430F2101TPW as the 20-pin TSSOP orderable configuration with a 16 MHz mixed-signal MCU, 1 KB Flash, and 128 B SRAM.
Is MSP430F2101TPW in stock and what is its lead time?
Current MSP430F2101TPW stock and lead time should be confirmed through the Request a Quote form on this page. The Texas Instruments product page lists MSP430F2101TPW as the 20-pin PW package option, while its orderable configuration and production status determine the applicable supply and lead-time response.
What is the best Texas Instruments equivalent for MSP430F2101TPW?
The MSP430F2101IPW is the closest Texas Instruments equivalent because it preserves the MSP430F2101 configuration and 20-pin PW package while changing the orderable suffix. For designs needing more memory, MSP430F2121TPW offers another same-family option, but the memory increase must be treated as a controlled variant change rather than an identical substitution.

נתוני עזר הנדסיים עבור MSP430F2101TPW — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MSP430F2101TPW for compact, low-power mixed-signal designs that need a 16 MHz MSP430 core, 16 GPIO pins, an analog comparator, a 16-bit timer, 1 KB Flash, and 128 B SRAM. MSP430F2101IPW is the closest same-family option when the required orderable grade matches that suffix; review temperature and shipment information before approval. Select MSP430F2121TPW, MSP430F2121IPW, MSP430F2111TPW, or MSP430F2111IPW when the design benefits from additional memory within the MSP430x21x1 family, after confirming the exact memory ratings, electrical limits, and pin configuration. None of these choices should replace the requirement for a larger MSP430 device when the firmware, RAM, timer channels, analog resources, or communication peripherals exceed the F21x1 family's capability.

השוואה עם חלופות

פרמטר מוצר זה MSP430F2101IPW MSP430F2121TPW MSP430F2121IPW MSP430F2111TPW MSP430F2111IPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 20-pin TSSOP (PW) 20-pin TSSOP (PW) 20-pin TSSOP (PW) 20-pin TSSOP (PW) 20-pin TSSOP (PW) 20-pin TSSOP (PW)
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Analog Comparator Integrated Integrated Integrated Integrated Integrated Integrated

מבדילים עיקריים

  • Directly matches the MSP430F2101 configuration (לעומתMSP430F2101IPW)
  • Lower memory profile within the same mixed-signal family (לעומתMSP430F2121TPW)
  • Very low standby consumption for duty-cycled sensing (לעומתMSP430F2121TPW)
  • Fast recovery from standby (לעומתMSP430F2101IPW)

הערות תכנון

Place the supply decoupling capacitor immediately adjacent to the device supply and ground pins, and follow the manufacturer datasheet layout example for the 20-pin PW package. Keep the analog comparator input traces short, route them away from digital output edges, and use a continuous ground reference beneath the device where the package and board construction permit it.

Design the firmware around the MSP430 low-power modes rather than using a busy-wait loop. The device can consume 250 µA in active mode at 1 MHz and 2.2 V, compared with 0.7 µA in standby and 0.1 µA in off mode with RAM retention. Retain only the state needed after wake-up, disable unused peripherals, and confirm that timer or comparator events can restart the required measurement sequence.

Do not assume that every MSP430x21x1 memory variant is interchangeable without checking code size, RAM usage, and interrupt-vector requirements. The MSP430F2101TPW has 1 KB Flash and 128 B SRAM, so buffer-intensive or protocol-heavy firmware may require a larger-memory variant. Also verify reset, programming-test, clock, and supply pins against the exact manufacturer pin-description table before release.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance attributes were not explicitly stated in the manufacturer product-page snippets or distributor listings. Review the current Texas Instruments product and quality documentation before approving the device for a regulated design.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MSP430F2101TPW datasheet MSP430F2101TPW specifications MSP430F2101TPW pinout MSP430F2101TPW datasheet pdf Texas Instruments MSP430F2101TPW MSP430F2101TPW equivalent MSP430F2101TPW replacement MSP430F2101TPW vs MSP430F2101IPW MSP430F2101TPW vs MSP430F2121TPW MSP430F2101TPW price MSP430F2101TPW stock MSP430F2101 16MHz low power MCU

רכיבים ומונחים קשורים

Texas Instruments MSP430F2101TPW MSP430F2101IPW MSP430F2121TPW MSP430F2121IPW MSP430F2111TPW MSP430F2111IPW MSP430 MSP430F2xx MSP430x21x1 16-bit RISC CPU mixed-signal microcontroller ultra-low-power microcontroller analog comparator 16-bit timer GPIO TSSOP-20 PW package surface-mount package Flash memory SRAM low-power mode standby mode RAM retention portable measurement
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר