PCM3006T/2K - 16-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3006T/2K ✓ פעילPCM3006T/2K סקירה
An audio codec is a mixed-signal integrated circuit that combines ADC and DAC functions with the digital interface needed to exchange audio samples with a host processor. The PCM3006T/2K belongs to the broader hierarchy of audio codec, audio interface IC, mixed-signal semiconductor, and interface integrated circuit. Its single-ended inputs and outputs simplify connection to line-level analog circuitry without requiring balanced audio channels.
Key documented characteristics include 16-bit conversion resolution, a stereo 2-ADC/2-DAC arrangement, and single-ended analog signal paths. The 24-SSOP package supports compact surface-mount layouts, while the tape-and-reel ordering option suits automated assembly. The /2K suffix identifies the specific Texas Instruments orderable configuration and should be retained when comparing replacements or issuing procurement requests.
Technically, the PCM3006T/2K separates analog conversion from digital sample transport. Two ADC channels provide the digital audio data path from the analog input stage, while two DAC channels reconstruct stereo audio from digital samples received through the serial interface. This integrated arrangement reduces the number of discrete converters normally required for a stereo signal chain and keeps analog input, conversion, and output functions in one component.
Typical uses include consumer audio equipment, portable media systems, digital recording products, and embedded audio subsystems in which a 16-bit stereo codec with single-ended I/O is sufficient. The part can also sit between an analog audio front end and a digital audio processor, allowing the host to perform decoding, mixing, storage, or communication while the codec handles analog-to-digital and digital-to-analog conversion.
Designers should confirm the interface timing, analog signal levels, clocking, and required external support circuitry against the manufacturer datasheet before layout. Keep analog and digital return paths well controlled, place input and output capacitors near their associated pins, and route the exposed signal paths away from switching nodes. The 24-SSOP footprint is relatively narrow, so adequate escape routing and assembly clearances are important.
This product summary combines the exact orderable MPN, package information, codec configuration, verified distributor listings, replacement analysis, and application-oriented engineering guidance. It is designed to help engineers identify the correct audio converter and prepare a source request without relying on ambiguous family-level descriptions.
חלופות תחליף ישיר עבור PCM3006T/2K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PCM3006T/2K (אותו גורם צורה וטביעת רגל) — שונים ב Digital Audio Interface, Package, Product Type.
PCM3006T
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PCM3006T/2KG6
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM3006T/2K מפרטים
| Product Type | Stereo audio codec |
| Converter Resolution | 16 bit |
| ADC Channels | 2 |
| DAC Channels | 2 |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Digital Audio Interface | Serial |
| מארז | 24-pin SSOP |
| סוג הרכבה | Surface mount |
| Shipping Format | Tape and reel |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
מדריך תצורת פינים של PCM3006T/2K 24-pin ssop
תצורת פינים עבור PCM3006T/2K (מארזת 24-pin ssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור PCM3006T/2K.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PCM3006T/2K מתאים עבור 6 יישוםs: Stereo Line-Level Audio Interface, Portable Media Player, Digital Audio Recording Product, Consumer Audio Equipment, Industrial Audio Control Module, Communication and Conferencing Audio.
Stereo Line-Level Audio Interface
The PCM3006T/2K fits a stereo line-level interface because it combines 2 ADC channels, 2 DAC channels, and 16-bit conversion in one 24-pin SSOP device. A host processor can receive digital samples from the single-ended analog inputs, process them, and return playback audio for conversion through the two single-ended DAC outputs. This integration reduces the number of separate converter packages and keeps the audio signal path compact. The main design consideration is matching input and output levels so the converters operate within their specified ranges without external clipping or excessive attenuation.
מומלץ
Portable Media Player
PCM3006T/2K is suitable for portable media systems that require two analog channels for recording and playback in a compact surface-mount design. Its 16-bit stereo conversion supports a straightforward digital-audio architecture in which analog input is sampled, stored or processed, and later reconstructed through the DAC outputs. The 24-pin SSOP package reduces occupied board area compared with separate ADC and IC packages. Designers should prioritize low-noise supply routing, stable clocking, and short analog traces to preserve performance in a compact, potentially mobile enclosure.
מומלץ
Digital Audio Recording Product
The PCM3006T/2K can serve as the stereo conversion stage in a digital recorder by digitizing two single-ended analog inputs through its ADC channels. The resulting 16-bit samples can be routed to a storage or communications processor, while the DAC channels support monitoring or line playback. Integrating both converter directions in one codec reduces board partitioning and simplifies firmware control. For reliable recording, use the manufacturer timing diagrams to configure the serial interface and verify input range, clock stability, and grounding before the capture path is enabled.
מומלץ
Consumer Audio Equipment
PCM3006T/2K provides a compact stereo conversion function for consumer equipment with both input and playback requirements. Two ADC channels can capture left and right analog sources, while two DAC channels produce corresponding analog playback signals through the serial digital interface. The 16-bit resolution and integrated 2-ADC/2-DAC arrangement align with cost-conscious audio products that do not require balanced channels. Designers should account for the 24-pin SSOP footprint, route analog signals away from digital clock lines, and confirm output filtering requirements in the manufacturer application guidance.
מומלץ
Industrial Audio Control Module
The PCM3006T/2K can support an industrial audio-control module that accepts analog monitoring signals and provides analog playback through a digital processor. Its 2-ADC and 2-DAC topology handles stereo monitoring in a compact module, while the serial interface allows the controller to exchange samples over a controlled digital bus. The 24-SSOP package supports standard surface-mount assembly but leaves little routing flexibility, so component placement, analog-ground partitioning, and clock-routing discipline are critical. Confirm environmental and supply requirements against the manufacturer documentation before deploying the codec in industrial equipment.
מומלץ
Communication and Conferencing Audio
PCM3006T/2K is applicable to communication equipment requiring local stereo capture and playback. A conferencing terminal can digitize microphone or line-level sources through the ADC channels, process or packetize the 16-bit samples, and reconstruct monitoring audio through the DAC outputs. The integrated codec reduces external converter count while the SSOP package helps maintain a compact terminal layout. Because communications systems can mix fast digital activity with sensitive analog signals, isolate codec ground currents, keep clock routing short, and validate the complete audio path for echo and noise margin.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PCM3006T/2K — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PCM3006T | PCM3006T/2KG6 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-SSOP | 24-SSOP | 24-SSOP |
| Product Type | Stereo audio codec | Stereo audio interface | 16-bit single-ended stereo audio codec |
| Converter Resolution | 16 bit | 16 bit | 16 bit |
| ADC Channels | 2 | 2 | 2 |
| DAC Channels | 2 | 2 | 2 |
מבדילים עיקריים
- Exact /2K orderable configuration (לעומתPCM3006T)
- Integrated stereo capture and playback (לעומתPCM3006T/2KG6)
- Single-ended analog architecture simplifies integration (לעומתPCM3006T/2KG6)
הערות תכנון
Route the two analog input channels and two analog output channels as compact, symmetric paths, keeping analog traces away from the serial clock and data lines. Place the associated input and output capacitors adjacent to their associated pins, and terminate unused inputs and outputs according to the manufacturer recommendations. This layout discipline reduces susceptibility to clock coupling, ground-current injection, and channel-to-channel crosstalk in the 24-pin SSOP footprint.
Do not infer the complete pinout or analog signal levels from the PCM3006 family name alone. The visible product information confirms the 16-bit stereo codec configuration and 24-SSOP package, but clock formats, supply limits, control pins, and analog input ranges must be taken from the manufacturer datasheet. Using the wrong control state or serial format can prevent valid samples from transferring even when the analog inputs are correctly connected.
Treat clock, serial data, and serial word-select traces as a related digital interface group and route them away from the analog pins. Use a continuous ground reference beneath and around the device, minimize loop area for return currents, and verify the interface timing against the processor that drives the codec. The 24-pin SSOP has limited spacing, so careful escape routing and assembly-aware placement are important for preserving signal margin.
מידע על תאימות
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 is not applicable to this general-purpose audio codec based on the available product classification.