PIC16C64AT-04I/L - 4MHz 8-bit OTP MCU 3.5KB | Microchip PLCC-44
MPN: PIC16C64AT-04I/L ✓ פעילPIC16C64AT-04I/L סקירה
An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, RAM, program memory, and peripherals on a single die. MCUs are classified by bit-width, memory type, and architectural family; the PIC16CXX belongs to the classic PIC mid-range family, a Harvard RISC architecture that emphasizes deterministic instruction timing, low power, and a compact 35-instruction instruction set. The OTP memory flavor means the part is programmed once and is typically used in production runs where firmware is finalized and stable.
Key features include a high-performance RISC CPU with only 35 single-word instructions to learn, DC to 4MHz clock input, 33 I/O pins with individual direction control, programmable code protection, power-on reset, watchdog timer with on-chip RC oscillator, and an industrial temperature range of -40C to +85C. The device also integrates a 14-bit instruction word with 8-bit data path, hardware stack, and multiple timer/counter modules suitable for embedded control tasks.
The PIC16C64A architecture uses a modified Harvard design with separate program and data buses, allowing instruction fetch and operand read to occur in the same cycle. The OTP EPROM cell enables windowed programming for prototyping with UV erasure, while the industrial-grade ceramic windowed CDIP variant exists for development and engineering samples. The PLCC-44 footprint is well-suited for socketed programming and rework in legacy industrial designs.
Typical applications include industrial automation controllers, HVAC fan and pump controls, appliance control boards, security and access control panels, and automotive body electronics (non-safety). The 33 I/O count and 128-byte RAM make it suitable for keypad scanning, LED or relay driving, and UART-based communication in mid-complexity embedded designs.
When designing with this part, ensure the 4V-5.5V supply is well regulated, leave unused I/O pins configured as outputs and tied low to minimize current consumption, and use the watchdog timer for reliable recovery from software lockups. The OTP memory cannot be reprogrammed in-circuit; a Flash-based PIC16F equivalent is recommended for prototypes requiring iterative firmware updates.
This page synthesizes distributor pricing, drop-in alternatives in the same PLCC-44 footprint, and practical design notes that go beyond the manufacturer datasheet.
חלופות תחליף ישיר עבור PIC16C64AT-04I/L — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16C64AT-04I/L (אותו גורם צורה וטביעת רגל) — שונים ב Mounting Type, Core Architecture, Operating Temperature, Timers, Watchdog Timer.
PIC16C64A-04I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16C64AT-04I/PQ
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16C64A-10I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16C64A-20I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F877A-I/L
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16C64AT-04I/L דירוגים מרביים ומאפיינים חשמליים
| Product Family | PIC16C Microcontroller |
| Core Architecture | 8-bit RISC (Harvard) |
| Program Memory Size | 3.5 KB (2K x 14) OTP |
| RAM Size | 128 bytes |
| תדר שעון מקסימלי | 4 MHz |
| Supply Voltage Range | 4 V to 5.5 V |
| Number of I/O Pins | 33 |
| Instruction Set Size | 35 instructions (single word) |
| Instruction Word Width | 14 bits |
| Data Path Width | 8 bits |
| טווח טמפרטורת פעולה | -40 C to +85 C (Industrial) |
| Package Type | 44-pin PLCC |
| Package Dimensions | 16.59 x 16.59 mm |
| סוג הרכבה | Surface Mount (J-Lead) |
| Watchdog Timer | Yes (on-chip RC oscillator) |
| Power-On Reset | Yes |
תצורת פינים של PIC16C64AT-04I/L
| פין 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| פין 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| פין 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| פין 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| פין 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / Voltage reference |
| פין 6 | RA4/T0CKI — PORTA bit 4 / Timer 0 clock input |
| פין 7 | RA5/SS/AN4 — PORTA bit 5 / Slave Select / Analog input 4 |
| פין 8 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| פין 9 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| פין 10 | RE2/CS/AN7 — PORTE bit 2 / Chip Select / Analog input 7 |
| פין 11 | VDD — Positive supply voltage |
| פין 12 | VSS — Ground reference |
| פין 13 | OSC1/CLKIN — Oscillator input / External clock input |
| פין 14 | OSC2/CLKOUT — Oscillator output / Clock output |
| פין 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock |
| פין 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| פין 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| פין 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| פין 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| פין 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| פין 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| פין 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| פין 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| פין 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| פין 25 | RC6/TX/CK — PORTC bit 6 / UART TX / Clock |
| פין 26 | RC7/RX/DT — PORTC bit 7 / UART RX / Data |
| פין 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| פין 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| פין 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| פין 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| פין 31 | VSS — Ground reference |
| פין 32 | VDD — Positive supply voltage |
| פין 33 | RB0/INT — PORTB bit 0 / External interrupt |
| פין 34 | RB1 — PORTB bit 1 |
| פין 35 | RB2 — PORTB bit 2 |
| פין 36 | RB3 — PORTB bit 3 |
| פין 37 | RB4 — PORTB bit 4 |
| פין 38 | RB5 — PORTB bit 5 |
| פין 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| פין 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| פין 41 | NC — Not connected |
| פין 42 | NC — Not connected |
| פין 43 | NC — Not connected |
| פין 44 | NC — Not connected |
יישומים טיפוסיים
PIC16C64AT-04I/L מתאים עבור 6 יישוםs: Industrial Automation Controllers, HVAC Fan and Pump Controls, Appliance Control Boards, Security and Access Control Panels, Automotive Body Electronics (Non-Safety), Test and Measurement Instruments.
Industrial Automation Controllers
The PIC16C64AT-04I/L fits industrial automation controllers with its 33 I/O pins capable of driving relays, sensors, and HMI keypads. The 128-byte RAM handles state machine variables, while the 4MHz clock supports UART communication at standard baud rates up to 38.4 kbps. Hardware watchdog timer recovers from software faults in motor and valve control applications, critical for unattended machinery. The -40C to +85C industrial temperature range tolerates factory floor environments, and the OTP memory suits mature firmware designs deployed in high-volume production lines.
מומלץ
HVAC Fan and Pump Controls
The PIC16C64AT-04I/L is well suited for HVAC fan and pump control boards where 33 I/O pins can interface with temperature sensors, triac drivers, and LED status indicators. The 14-bit instruction set provides efficient PID loop implementation for closed-loop fan speed and pressure regulation. Operating from a regulated 5V supply, the device's low CMOS power consumption keeps standby current minimal for energy-efficient appliance designs. Industrial temperature grade ensures reliable operation in unconditioned plant rooms.
מומלץ
Appliance Control Boards
The PIC16C64AT-04I/L integrates washing machine, dishwasher, and microwave oven control functions with its OTP memory locking in production firmware permanently. The Harvard RISC architecture provides deterministic interrupt response for time-critical sequencing of motor drivers, valves, and heating elements. Power-on reset and watchdog timer prevent lockups in white goods appliances, while the 33 I/O pins accommodate matrix keypads, seven-segment displays, and buzzer drivers. Surface-mount PLCC-44 packaging supports automated assembly.
מומלץ
Security and Access Control Panels
The PIC16C64AT-04I/L addresses keypad readers, door controllers, and intrusion alarm panels requiring stable OTP firmware preventing field tampering. The 128-byte RAM stores user credential buffers and event logs in real time, while the 33 I/O pins scan 4x4 keypads, drive piezoelectric buzzers, and read magnetic reed switches. UART peripherals support communication with central alarm panels at standard baud rates. Industrial temperature operation tolerates outdoor cabinet environments.
מומלץ
Automotive Body Electronics (Non-Safety)
The PIC16C64AT-04I/L serves non-safety automotive body control modules such as seat controllers, mirror adjusters, and ambient lighting systems. The 5V operation interfaces directly with automotive 12V bus via regulator, while the -40C to +85C industrial temperature range covers cabin environments. The watchdog timer and power-on reset handle automotive voltage transients and cranking conditions. OTP memory locks firmware at production, ensuring field reliability across vehicle service life.
מומלץ
Test and Measurement Instruments
The PIC16C64AT-04I/L drives handheld multimeters, cable testers, and bench-top instrumentation requiring deterministic real-time control. The 35-instruction RISC set implements measurement state machines efficiently, while the 33 I/O pins drive LCD segments, button inputs, and range selection relays. The 4MHz clock generates precise timing references for frequency counters and capacitance meters. OTP memory locks calibrated firmware preventing unauthorized recalibration in field-deployed instruments.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16C64AT-04I/L — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16C64A-04I/L | PIC16C64AT-04I/PQ | PIC16C64A-10I/L | PIC16C64A-20I/L | PIC16F877A-I/L |
|---|---|---|---|---|---|---|
| Package | PLCC-44 | PLCC-44 (same) | MQFP-44 (same pin count) | PLCC-44 (same) | PLCC-44 (same) | PLCC-44 (same) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 10 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 14 KB Flash |
| RAM Size | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 368 bytes |
| Number of I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
מבדילים עיקריים
- Tape and reel packaging for SMT automation (לעומתPIC16C64A-04I/L)
- Higher 10 MHz clock speed option available (לעומתPIC16C64A-10I/L)
- Flash reprogrammability for iterative development (לעומתPIC16F877A-I/L)
הערות תכנון
Power the PIC16C64AT-04I/L from a regulated 5V rail with both VDD pins (11 and 32) connected and both VSS pins (12 and 31) grounded. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor near the IC. Power-on reset is internal but the MCLR pin (pin 1) should be pulled high through a 10 kohm resistor to VDD with optional 100 nF to ground for noise immunity. Supply voltage must remain within 4.0V to 5.5V; brownout below 4V can cause EPROM read errors.
OTP memory cannot be reprogrammed: any firmware bug in production becomes permanent. Always validate firmware thoroughly on a windowed PIC16C64A/JW prototype or Flash PIC16F877A-I/L equivalent before committing to OTP programming. Configure unused I/O pins as outputs and tie them low to minimize current consumption. The watchdog timer should be enabled in critical applications and periodically cleared via CLRWDT to reset the MCU on software faults.
Route the crystal traces (OSC1/OSC2, pins 13-14) as short as possible and keep them away from high-current switching traces to prevent clock corruption. For 4 MHz operation, use a 4 MHz crystal with 22 pF load capacitors to ground on each oscillator pin. Place the PLCC-44 socket footprint on the PCB so that pin 1 is identifiable via chamfered corner marking; include a decoupling capacitor land pattern under the socket if board area permits for improved EMI performance.
מידע על תאימות
RoHS and lead-free status not explicitly stated in the verified web data for PIC16C64AT-04I/L. Industrial temperature grade (-40C to +85C) is qualified but not AEC-Q100 automotive. Legacy OTP parts often predate RoHS transition; confirm compliance with distributor before environmental-sensitive designs.
