PIC16C64AT-04I/L - 4MHz 8-bit OTP MCU 3.5KB | Microchip PLCC-44
MPN: PIC16C64AT-04I/L ✓ AktifPIC16C64AT-04I/L Ringkasan
An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, RAM, program memory, and peripherals on a single die. MCUs are classified by bit-width, memory type, and architectural family; the PIC16CXX belongs to the classic PIC mid-range family, a Harvard RISC architecture that emphasizes deterministic instruction timing, low power, and a compact 35-instruction instruction set. The OTP memory flavor means the part is programmed once and is typically used in production runs where firmware is finalized and stable.
Key features include a high-performance RISC CPU with only 35 single-word instructions to learn, DC to 4MHz clock input, 33 I/O pins with individual direction control, programmable code protection, power-on reset, watchdog timer with on-chip RC oscillator, and an industrial temperature range of -40C to +85C. The device also integrates a 14-bit instruction word with 8-bit data path, hardware stack, and multiple timer/counter modules suitable for embedded control tasks.
The PIC16C64A architecture uses a modified Harvard design with separate program and data buses, allowing instruction fetch and operand read to occur in the same cycle. The OTP EPROM cell enables windowed programming for prototyping with UV erasure, while the industrial-grade ceramic windowed CDIP variant exists for development and engineering samples. The PLCC-44 footprint is well-suited for socketed programming and rework in legacy industrial designs.
Typical applications include industrial automation controllers, HVAC fan and pump controls, appliance control boards, security and access control panels, and automotive body electronics (non-safety). The 33 I/O count and 128-byte RAM make it suitable for keypad scanning, LED or relay driving, and UART-based communication in mid-complexity embedded designs.
When designing with this part, ensure the 4V-5.5V supply is well regulated, leave unused I/O pins configured as outputs and tied low to minimize current consumption, and use the watchdog timer for reliable recovery from software lockups. The OTP memory cannot be reprogrammed in-circuit; a Flash-based PIC16F equivalent is recommended for prototypes requiring iterative firmware updates.
This page synthesizes distributor pricing, drop-in alternatives in the same PLCC-44 footprint, and practical design notes that go beyond the manufacturer datasheet.
Alternatif penggantian untuk PIC16C64AT-04I/L — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC16C64AT-04I/L (sama faktor bentuk dan footprint) — berbeda di dalam Mounting Type, Core Architecture, Operating Temperature, Timers, Watchdog Timer.
PIC16C64A-04I/L
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16C64AT-04I/PQ
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16C64A-10I/L
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16C64A-20I/L
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F877A-I/L
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16C64AT-04I/L Rating Maksimal & Karakteristik Listrik
| Product Family | PIC16C Microcontroller |
| Core Architecture | 8-bit RISC (Harvard) |
| Program Memory Size | 3.5 KB (2K x 14) OTP |
| RAM Size | 128 bytes |
| Frekuensi Bawah Maximum | 4 MHz |
| Supply Voltage Range | 4 V to 5.5 V |
| Number of I/O Pins | 33 |
| Instruction Set Size | 35 instructions (single word) |
| Instruction Word Width | 14 bits |
| Data Path Width | 8 bits |
| Rentang Suhu Kerja | -40 C to +85 C (Industrial) |
| Package Type | 44-pin PLCC |
| Package Dimensions | 16.59 x 16.59 mm |
| Tipe Mounting | Surface Mount (J-Lead) |
| Watchdog Timer | Yes (on-chip RC oscillator) |
| Power-On Reset | Yes |
Konfigurasi Pin PIC16C64AT-04I/L
| Pin produk 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Pin produk 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Pin produk 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Pin produk 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Pin produk 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / Voltage reference |
| Pin produk 6 | RA4/T0CKI — PORTA bit 4 / Timer 0 clock input |
| Pin produk 7 | RA5/SS/AN4 — PORTA bit 5 / Slave Select / Analog input 4 |
| Pin produk 8 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| Pin produk 9 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| Pin produk 10 | RE2/CS/AN7 — PORTE bit 2 / Chip Select / Analog input 7 |
| Pin produk 11 | VDD — Positive supply voltage |
| Pin produk 12 | VSS — Ground reference |
| Pin produk 13 | OSC1/CLKIN — Oscillator input / External clock input |
| Pin produk 14 | OSC2/CLKOUT — Oscillator output / Clock output |
| Pin produk 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock |
| Pin produk 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Pin produk 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Pin produk 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pin produk 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| Pin produk 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| Pin produk 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| Pin produk 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| Pin produk 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pin produk 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pin produk 25 | RC6/TX/CK — PORTC bit 6 / UART TX / Clock |
| Pin produk 26 | RC7/RX/DT — PORTC bit 7 / UART RX / Data |
| Pin produk 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| Pin produk 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| Pin produk 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| Pin produk 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| Pin produk 31 | VSS — Ground reference |
| Pin produk 32 | VDD — Positive supply voltage |
| Pin produk 33 | RB0/INT — PORTB bit 0 / External interrupt |
| Pin produk 34 | RB1 — PORTB bit 1 |
| Pin produk 35 | RB2 — PORTB bit 2 |
| Pin produk 36 | RB3 — PORTB bit 3 |
| Pin produk 37 | RB4 — PORTB bit 4 |
| Pin produk 38 | RB5 — PORTB bit 5 |
| Pin produk 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pin produk 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pin produk 41 | NC — Not connected |
| Pin produk 42 | NC — Not connected |
| Pin produk 43 | NC — Not connected |
| Pin produk 44 | NC — Not connected |
Aplikasi Umum
PIC16C64AT-04I/L cocok untuk 6 aplikasis: Industrial Automation Controllers, HVAC Fan and Pump Controls, Appliance Control Boards, Security and Access Control Panels, Automotive Body Electronics (Non-Safety), Test and Measurement Instruments.
Industrial Automation Controllers
The PIC16C64AT-04I/L fits industrial automation controllers with its 33 I/O pins capable of driving relays, sensors, and HMI keypads. The 128-byte RAM handles state machine variables, while the 4MHz clock supports UART communication at standard baud rates up to 38.4 kbps. Hardware watchdog timer recovers from software faults in motor and valve control applications, critical for unattended machinery. The -40C to +85C industrial temperature range tolerates factory floor environments, and the OTP memory suits mature firmware designs deployed in high-volume production lines.
Direkomendasikan
HVAC Fan and Pump Controls
The PIC16C64AT-04I/L is well suited for HVAC fan and pump control boards where 33 I/O pins can interface with temperature sensors, triac drivers, and LED status indicators. The 14-bit instruction set provides efficient PID loop implementation for closed-loop fan speed and pressure regulation. Operating from a regulated 5V supply, the device's low CMOS power consumption keeps standby current minimal for energy-efficient appliance designs. Industrial temperature grade ensures reliable operation in unconditioned plant rooms.
Direkomendasikan
Appliance Control Boards
The PIC16C64AT-04I/L integrates washing machine, dishwasher, and microwave oven control functions with its OTP memory locking in production firmware permanently. The Harvard RISC architecture provides deterministic interrupt response for time-critical sequencing of motor drivers, valves, and heating elements. Power-on reset and watchdog timer prevent lockups in white goods appliances, while the 33 I/O pins accommodate matrix keypads, seven-segment displays, and buzzer drivers. Surface-mount PLCC-44 packaging supports automated assembly.
Direkomendasikan
Security and Access Control Panels
The PIC16C64AT-04I/L addresses keypad readers, door controllers, and intrusion alarm panels requiring stable OTP firmware preventing field tampering. The 128-byte RAM stores user credential buffers and event logs in real time, while the 33 I/O pins scan 4x4 keypads, drive piezoelectric buzzers, and read magnetic reed switches. UART peripherals support communication with central alarm panels at standard baud rates. Industrial temperature operation tolerates outdoor cabinet environments.
Direkomendasikan
Automotive Body Electronics (Non-Safety)
The PIC16C64AT-04I/L serves non-safety automotive body control modules such as seat controllers, mirror adjusters, and ambient lighting systems. The 5V operation interfaces directly with automotive 12V bus via regulator, while the -40C to +85C industrial temperature range covers cabin environments. The watchdog timer and power-on reset handle automotive voltage transients and cranking conditions. OTP memory locks firmware at production, ensuring field reliability across vehicle service life.
Direkomendasikan
Test and Measurement Instruments
The PIC16C64AT-04I/L drives handheld multimeters, cable testers, and bench-top instrumentation requiring deterministic real-time control. The 35-instruction RISC set implements measurement state machines efficiently, while the 33 I/O pins drive LCD segments, button inputs, and range selection relays. The 4MHz clock generates precise timing references for frequency counters and capacitance meters. OTP memory locks calibrated firmware preventing unauthorized recalibration in field-deployed instruments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC16C64AT-04I/L — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC16C64A-04I/L | PIC16C64AT-04I/PQ | PIC16C64A-10I/L | PIC16C64A-20I/L | PIC16F877A-I/L |
|---|---|---|---|---|---|---|
| Package | PLCC-44 | PLCC-44 (same) | MQFP-44 (same pin count) | PLCC-44 (same) | PLCC-44 (same) | PLCC-44 (same) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 10 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 3.5 KB OTP | 14 KB Flash |
| RAM Size | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 368 bytes |
| Number of I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Diferensiator Kunci
- Tape and reel packaging for SMT automation (vsPIC16C64A-04I/L)
- Higher 10 MHz clock speed option available (vsPIC16C64A-10I/L)
- Flash reprogrammability for iterative development (vsPIC16F877A-I/L)
Catatan Desain
Power the PIC16C64AT-04I/L from a regulated 5V rail with both VDD pins (11 and 32) connected and both VSS pins (12 and 31) grounded. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor near the IC. Power-on reset is internal but the MCLR pin (pin 1) should be pulled high through a 10 kohm resistor to VDD with optional 100 nF to ground for noise immunity. Supply voltage must remain within 4.0V to 5.5V; brownout below 4V can cause EPROM read errors.
OTP memory cannot be reprogrammed: any firmware bug in production becomes permanent. Always validate firmware thoroughly on a windowed PIC16C64A/JW prototype or Flash PIC16F877A-I/L equivalent before committing to OTP programming. Configure unused I/O pins as outputs and tie them low to minimize current consumption. The watchdog timer should be enabled in critical applications and periodically cleared via CLRWDT to reset the MCU on software faults.
Route the crystal traces (OSC1/OSC2, pins 13-14) as short as possible and keep them away from high-current switching traces to prevent clock corruption. For 4 MHz operation, use a 4 MHz crystal with 22 pF load capacitors to ground on each oscillator pin. Place the PLCC-44 socket footprint on the PCB so that pin 1 is identifiable via chamfered corner marking; include a decoupling capacitor land pattern under the socket if board area permits for improved EMI performance.
Informasi Konformitas
RoHS and lead-free status not explicitly stated in the verified web data for PIC16C64AT-04I/L. Industrial temperature grade (-40C to +85C) is qualified but not AEC-Q100 automotive. Legacy OTP parts often predate RoHS transition; confirm compliance with distributor before environmental-sensitive designs.
