PIC16F676-E/ML - 8-Bit 20MHz 10-Bit ADC MCU | Microchip
MPN: PIC16F676-E/ML ✓ פעילPIC16F676-E/ML סקירה
A PIC microcontroller is a compact embedded-control processor designed around a RISC architecture, program Flash, data RAM, and integrated peripherals. The PIC16F676 belongs to Microchip's 16F family and combines an 8-bit CPU, configurable I/O, ADC inputs, timer resources, and internal oscillator functions in one device. Its 35 single-word instructions and 200 ns instruction execution time provide a simple architecture for control, measurement, and monitoring products.
Key features include 1.75 KB of Flash organized as 1K x 14 words, 64 bytes of RAM, a 10-bit analog-to-digital converter, and 12 I/O pins. The 20 MHz maximum instruction clock supports time-sensitive control loops and communication routines. A 16-QFN 4 x 4 mm package reduces board area compared with leaded packages, while the exposed thermal pad improves heat transfer when the device operates at elevated clock or ambient temperatures.
The PIC16F676 architecture is suited to applications requiring more analog measurement capability than a basic digital controller but only modest program and data memory. Its integrated 10-bit ADC can measure resistive, voltage, and sensor signals through configurable analog inputs. The 8-bit CPU provides straightforward instruction execution, while internal oscillator options support economical designs that do not require an external crystal. The manufacturer datasheet also identifies the PIC16F630 and PIC16F676 as identical except for the ADC, making the PIC16F676 the appropriate choice when analog conversion is required.
Typical uses include compact industrial controllers, digital thermometers, analog sensor interfaces, LED and lighting controllers, appliance control panels, and low-cost embedded measurement systems. The device can be programmed in-circuit through its programming interface, supporting development, production programming, and field configuration workflows.
When laying out a 16-QFN board, route the exposed pad to a thermal and ground plane and follow the manufacturer land-pattern and soldering guidance. Decoupling should be placed directly across the supply pins, while analog and programming signals should be kept away from noisy switching nodes. Firmware should also include startup, ADC calibration, and input-protection checks appropriate to the final system.
חלופות תחליף ישיר עבור PIC16F676-E/ML — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16F676-E/ML (אותו גורם צורה וטביעת רגל) — שונים ב Package, Timers, Operating Voltage Range, ADC, Data EEPROM.
PIC16F676-I/ML
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F676A-I/ML
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PIC16F676A-E/ML
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
PIC16F676-E/ML דירוגים מרביים ומאפיינים חשמליים
| Device Type | 8-bit RISC Flash microcontroller |
| תדר שעון מקסימלי | 20 MHz |
| Program Memory | 1.75 KB Flash (1K x 14 words) |
| Data Memory | 64 bytes RAM |
| Instruction Set | 35 single-word instructions |
| Instruction Execution Time | 200 ns |
| ADC Resolution | 10-bit |
| I/O Pin Count | 12 pins |
| Operating Voltage Range | 2 V to 5.5 V |
| מארז | 16-QFN (4 x 4 mm) |
| Package Type | VQFN with exposed pad |
| סוג הרכבה | Surface mount |
| Shipping Format | Tube |
| סטטוס RoHS | Compliant |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
מדריך תצורת פינים של PIC16F676-E/ML vqfn with exposed pad
תצורת פינים עבור PIC16F676-E/ML (מארזת vqfn with exposed pad). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור PIC16F676-E/ML.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PIC16F676-E/ML מתאים עבור 6 יישוםs: Industrial Sensor Interface, Digital Thermometer and Meter, LED Lighting Controller, Appliance Control Board, Programmable Logic Controller, Battery-Powered Monitor.
Industrial Sensor Interface
The PIC16F676-E/ML fits compact sensor-conditioning products that need direct analog measurement without a larger mixed-signal processor. Its 10-bit ADC and 12 I/O pins can support switches, indicators, and several sensor inputs while the 20 MHz core handles acquisition sequencing and control logic. The 2 V to 5.5 V operating range also supports low-voltage industrial sensor buses and portable instruments. Firmware should average or filter ADC readings, calibrate offset and gain, and reject out-of-range inputs. Because the 16-QFN package has an exposed pad, the PCB should provide continuous ground and thermal copper beneath the device, while decoupling capacitors must be placed close to the supply pins.
מומלץ
Digital Thermometer and Meter
A PIC16F676-E/ML can implement a standalone digital thermometer or panel meter with a display, keypad, and resistive sensor. The 10-bit ADC provides sufficient resolution for many thermistor, potentiometer, and divider-based measurements, while the 20 MHz CPU supports responsive display updates and debounced user input. Its 1.75 KB of Flash is suitable for a focused application with calibration tables, display formatting, and a small state machine. Designers should calculate the sensor-divider current to balance resolution against self-heating, apply periodic offset calibration, and isolate analog input routing from display and switching signals. The exposed pad should connect to the ground plane to improve heat spreading.
מומלץ
LED Lighting Controller
The PIC16F676-E/ML can drive LED status indicators, decorative lighting sequences, or small constant-current LED modules. Twelve I/O pins provide enough connections for multiple channels, buttons, and fault signals, while the 20 MHz clock allows precise timing for dimming and effects. Its 64 bytes of RAM are adequate for channel state, counters, and basic animation parameters. Firmware should use timer-based scheduling rather than blocking delays, implement a default-off state after reset, and limit total LED current within system limits. Decoupling capacitors should be located at the MCU supply pins, and the QFN exposed pad should be tied to ground to reduce temperature gradients during repeated switching.
מומלץ
Appliance Control Board
The PIC16F676-E/ML is appropriate for compact appliance controls that combine a few inputs, an analog measurement channel, and simple actuator outputs. The 8-bit core and 35 single-word instructions simplify deterministic control of relays, indicators, heaters, or motor-control interfaces, while the 1.75 KB Flash can hold a focused state machine and safety checks. The 12 I/O pins allow external buttons, interlocks, and status LEDs to share the controller. Firmware should include debouncing, actuator timing, fault latching, and safe output states during startup or reset. Protect outputs against inductive transients and maintain separation between the exposed-pad ground return and noisy switching paths.
מומלץ
Programmable Logic Controller
The PIC16F676-E/ML can implement a small PLC or fixed-function controller for lighting panels, test equipment, pumps, and simple machines. Its 20 MHz execution rate supports responsive input scanning and timed outputs, while the 10-bit ADC adds analog supervision where required. Twelve I/O pins provide a useful mix of discrete and analog-capable channels for a compact embedded controller. A robust design should use timer interrupts, deterministic debounce logic, watchdogs where applicable, and explicit output states after reset. The 16-QFN land pattern requires careful assembly control, and the exposed pad must be connected to a solid thermal and ground plane for reliable operation over temperature.
מומלץ
Battery-Powered Monitor
The PIC16F676-E/ML can serve as the controller in a small battery-powered monitoring product because its 2 V to 5.5 V operating range accommodates common low-energy supply rails. The 10-bit ADC is useful for battery-voltage measurement, while the 20 MHz core can execute wake-up logic, threshold checks, and data logging between long idle periods. The 64 bytes of RAM limits how much history can be buffered at once, so persistent storage or a serial interface may be required for extended records. Firmware should select the lowest acceptable clock and disable unused peripherals where possible. The compact QFN footprint helps reduce board area, but its exposed pad requires careful assembly and thermal design.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16F676-E/ML — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16F676-I/ML | PIC16F676A-I/ML | PIC16F676A-E/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-QFN (4 x 4 mm) | 16-QFN (4 x 4 mm) | 16-QFN (4 x 4 mm) | 16-QFN (4 x 4 mm) |
| CPU Architecture | 8-bit RISC | 8-bit RISC | 8-bit RISC | 8-bit RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 1.75 KB Flash | 1.75 KB Flash | 1.75 KB Flash | 1.75 KB Flash |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit |
| Operating Voltage Range | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V |
| Temperature Grade | Extended /E | Industrial /I | Industrial /I | Extended /E |
| Silicon Revision | Original PIC16F676 | Original PIC16F676 | PIC16F676A revision | PIC16F676A revision |
| Programming Compatibility | PIC16F676 serial programming interface | Same family programming interface | Same family programming interface; validate revision | Same family programming interface; validate revision |
מבדילים עיקריים
- Integrated conversion for compact analog-control designs (לעומתPIC16F676-I/ML)
- Extended-temperature option within the same footprint (לעומתPIC16F676-I/ML)
- Revision-qualified drop-in family option (לעומתPIC16F676A-I/ML)
הערות תכנון
Use the manufacturer land pattern for the 16-QFN 4 x 4 mm package and connect the exposed pad to the ground or designated thermal plane. Place input and output decoupling capacitors immediately adjacent to their supply pins. Keep programming-trace geometry away from ADC inputs and switching nodes, and provide adequate assembly clearance around the package edges for reliable solder joints.
Design the supply rail for the device's 2 V to 5.5 V operating range and account for startup current as well as active consumption. Place the primary bypass capacitor close to the supply pins and add bulk capacitance at the regulator output according to its stability behavior. Do not infer the internal oscillator or ADC reference accuracy from supply voltage without checking the manufacturer electrical characteristics.
Do not treat a same-package replacement as automatically firmware-compatible. PIC16F676 revision-qualified devices should be programmed and tested against the existing application, including ADC behavior, oscillator startup, watchdog settings, and configuration words. Verify the selected temperature grade against the enclosure's maximum and minimum ambient conditions before approving a substitution.
For analog measurements, route the sensor signal away from digital clocks and programming signals, keep the input impedance high, and calibrate gain and offset in firmware. The 10-bit ADC benefits from stable reference and supply conditions. If PWM, relays, or switching loads are present, synchronize their transitions away from precision acquisition windows where practical.
מידע על תאימות
The product listing identifies the device as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified.