PIC16F676-E/ML - 8-Bit 20MHz 10-Bit ADC MCU | Microchip
料号: PIC16F676-E/ML ✓ 量产中PIC16F676-E/ML 概述
A PIC microcontroller is a compact embedded-control processor designed around a RISC architecture, program Flash, data RAM, and integrated peripherals. The PIC16F676 belongs to Microchip's 16F family and combines an 8-bit CPU, configurable I/O, ADC inputs, timer resources, and internal oscillator functions in one device. Its 35 single-word instructions and 200 ns instruction execution time provide a simple architecture for control, measurement, and monitoring products.
Key features include 1.75 KB of Flash organized as 1K x 14 words, 64 bytes of RAM, a 10-bit analog-to-digital converter, and 12 I/O pins. The 20 MHz maximum instruction clock supports time-sensitive control loops and communication routines. A 16-QFN 4 x 4 mm package reduces board area compared with leaded packages, while the exposed thermal pad improves heat transfer when the device operates at elevated clock or ambient temperatures.
The PIC16F676 architecture is suited to applications requiring more analog measurement capability than a basic digital controller but only modest program and data memory. Its integrated 10-bit ADC can measure resistive, voltage, and sensor signals through configurable analog inputs. The 8-bit CPU provides straightforward instruction execution, while internal oscillator options support economical designs that do not require an external crystal. The manufacturer datasheet also identifies the PIC16F630 and PIC16F676 as identical except for the ADC, making the PIC16F676 the appropriate choice when analog conversion is required.
Typical uses include compact industrial controllers, digital thermometers, analog sensor interfaces, LED and lighting controllers, appliance control panels, and low-cost embedded measurement systems. The device can be programmed in-circuit through its programming interface, supporting development, production programming, and field configuration workflows.
When laying out a 16-QFN board, route the exposed pad to a thermal and ground plane and follow the manufacturer land-pattern and soldering guidance. Decoupling should be placed directly across the supply pins, while analog and programming signals should be kept away from noisy switching nodes. Firmware should also include startup, ADC calibration, and input-protection checks appropriate to the final system.
直接替换替代料: PIC16F676-E/ML ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC16F676-E/ML (相同外形与封装尺寸) ——差异在于 Package, Timers, Operating Voltage Range, ADC, Data EEPROM.
PIC16F676-I/ML
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PIC16F676A-I/ML
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC16F676A-E/ML
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC16F676-E/ML 最大额定值与电气特性
| Device Type | 8-bit RISC Flash microcontroller |
| 最大时钟频率 | 20 MHz |
| Program Memory | 1.75 KB Flash (1K x 14 words) |
| Data Memory | 64 bytes RAM |
| Instruction Set | 35 single-word instructions |
| Instruction Execution Time | 200 ns |
| ADC Resolution | 10-bit |
| I/O Pin Count | 12 pins |
| Operating Voltage Range | 2 V to 5.5 V |
| 封装 | 16-QFN (4 x 4 mm) |
| Package Type | VQFN with exposed pad |
| 安装类型 | Surface mount |
| Shipping Format | Tube |
| RoHS 状态 | Compliant |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PIC16F676-E/ML vqfn with exposed pad 引脚配置指南
PIC16F676-E/ML(vqfn with exposed pad 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PIC16F676-E/ML.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC16F676-E/ML 适用于 6 应用s: Industrial Sensor Interface, Digital Thermometer and Meter, LED Lighting Controller, Appliance Control Board, Programmable Logic Controller, Battery-Powered Monitor.
Industrial Sensor Interface
The PIC16F676-E/ML fits compact sensor-conditioning products that need direct analog measurement without a larger mixed-signal processor. Its 10-bit ADC and 12 I/O pins can support switches, indicators, and several sensor inputs while the 20 MHz core handles acquisition sequencing and control logic. The 2 V to 5.5 V operating range also supports low-voltage industrial sensor buses and portable instruments. Firmware should average or filter ADC readings, calibrate offset and gain, and reject out-of-range inputs. Because the 16-QFN package has an exposed pad, the PCB should provide continuous ground and thermal copper beneath the device, while decoupling capacitors must be placed close to the supply pins.
推荐
Digital Thermometer and Meter
A PIC16F676-E/ML can implement a standalone digital thermometer or panel meter with a display, keypad, and resistive sensor. The 10-bit ADC provides sufficient resolution for many thermistor, potentiometer, and divider-based measurements, while the 20 MHz CPU supports responsive display updates and debounced user input. Its 1.75 KB of Flash is suitable for a focused application with calibration tables, display formatting, and a small state machine. Designers should calculate the sensor-divider current to balance resolution against self-heating, apply periodic offset calibration, and isolate analog input routing from display and switching signals. The exposed pad should connect to the ground plane to improve heat spreading.
推荐
LED Lighting Controller
The PIC16F676-E/ML can drive LED status indicators, decorative lighting sequences, or small constant-current LED modules. Twelve I/O pins provide enough connections for multiple channels, buttons, and fault signals, while the 20 MHz clock allows precise timing for dimming and effects. Its 64 bytes of RAM are adequate for channel state, counters, and basic animation parameters. Firmware should use timer-based scheduling rather than blocking delays, implement a default-off state after reset, and limit total LED current within system limits. Decoupling capacitors should be located at the MCU supply pins, and the QFN exposed pad should be tied to ground to reduce temperature gradients during repeated switching.
推荐
Appliance Control Board
The PIC16F676-E/ML is appropriate for compact appliance controls that combine a few inputs, an analog measurement channel, and simple actuator outputs. The 8-bit core and 35 single-word instructions simplify deterministic control of relays, indicators, heaters, or motor-control interfaces, while the 1.75 KB Flash can hold a focused state machine and safety checks. The 12 I/O pins allow external buttons, interlocks, and status LEDs to share the controller. Firmware should include debouncing, actuator timing, fault latching, and safe output states during startup or reset. Protect outputs against inductive transients and maintain separation between the exposed-pad ground return and noisy switching paths.
推荐
Programmable Logic Controller
The PIC16F676-E/ML can implement a small PLC or fixed-function controller for lighting panels, test equipment, pumps, and simple machines. Its 20 MHz execution rate supports responsive input scanning and timed outputs, while the 10-bit ADC adds analog supervision where required. Twelve I/O pins provide a useful mix of discrete and analog-capable channels for a compact embedded controller. A robust design should use timer interrupts, deterministic debounce logic, watchdogs where applicable, and explicit output states after reset. The 16-QFN land pattern requires careful assembly control, and the exposed pad must be connected to a solid thermal and ground plane for reliable operation over temperature.
推荐
Battery-Powered Monitor
The PIC16F676-E/ML can serve as the controller in a small battery-powered monitoring product because its 2 V to 5.5 V operating range accommodates common low-energy supply rails. The 10-bit ADC is useful for battery-voltage measurement, while the 20 MHz core can execute wake-up logic, threshold checks, and data logging between long idle periods. The 64 bytes of RAM limits how much history can be buffered at once, so persistent storage or a serial interface may be required for extended records. Firmware should select the lowest acceptable clock and disable unused peripherals where possible. The compact QFN footprint helps reduce board area, but its exposed pad requires careful assembly and thermal design.
推荐
推荐产品汇总
工程参考数据: PIC16F676-E/ML ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F676-I/ML | PIC16F676A-I/ML | PIC16F676A-E/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-QFN (4 x 4 mm) | 16-QFN (4 x 4 mm) | 16-QFN (4 x 4 mm) | 16-QFN (4 x 4 mm) |
| CPU Architecture | 8-bit RISC | 8-bit RISC | 8-bit RISC | 8-bit RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 1.75 KB Flash | 1.75 KB Flash | 1.75 KB Flash | 1.75 KB Flash |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit |
| Operating Voltage Range | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V |
| Temperature Grade | Extended /E | Industrial /I | Industrial /I | Extended /E |
| Silicon Revision | Original PIC16F676 | Original PIC16F676 | PIC16F676A revision | PIC16F676A revision |
| Programming Compatibility | PIC16F676 serial programming interface | Same family programming interface | Same family programming interface; validate revision | Same family programming interface; validate revision |
关键差异点
- Integrated conversion for compact analog-control designs (对比 PIC16F676-I/ML)
- Extended-temperature option within the same footprint (对比 PIC16F676-I/ML)
- Revision-qualified drop-in family option (对比 PIC16F676A-I/ML)
设计说明
Use the manufacturer land pattern for the 16-QFN 4 x 4 mm package and connect the exposed pad to the ground or designated thermal plane. Place input and output decoupling capacitors immediately adjacent to their supply pins. Keep programming-trace geometry away from ADC inputs and switching nodes, and provide adequate assembly clearance around the package edges for reliable solder joints.
Design the supply rail for the device's 2 V to 5.5 V operating range and account for startup current as well as active consumption. Place the primary bypass capacitor close to the supply pins and add bulk capacitance at the regulator output according to its stability behavior. Do not infer the internal oscillator or ADC reference accuracy from supply voltage without checking the manufacturer electrical characteristics.
Do not treat a same-package replacement as automatically firmware-compatible. PIC16F676 revision-qualified devices should be programmed and tested against the existing application, including ADC behavior, oscillator startup, watchdog settings, and configuration words. Verify the selected temperature grade against the enclosure's maximum and minimum ambient conditions before approving a substitution.
For analog measurements, route the sensor signal away from digital clocks and programming signals, keep the input impedance high, and calibrate gain and offset in firmware. The 10-bit ADC benefits from stable reference and supply conditions. If PWM, relays, or switching loads are present, synchronize their transitions away from precision acquisition windows where practical.
合规信息
The product listing identifies the device as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified.