Microchip Technology

PIC16F676-E/ML - 8-Bit 20MHz 10-Bit ADC MCU | Microchip

MPN: PIC16F676-E/ML ✓ Active
2 V to 5.5 V Vdss 16-QFN (4 x 4 mm) Package 20 MHz Speed 1.75 KB Flash (1K x 14 words) Memory
MOQ: 1 |

PIC16F676-E/ML Overview

The Microchip Technology PIC16F676-E/ML is an 8-bit CMOS Flash PIC microcontroller rated for 20 MHz operation, with 1.75 KB of program Flash, 64 bytes of RAM, a 10-bit ADC, and 12 I/O pins in a 16-pin 4 x 4 mm QFN package with an exposed pad. The /E grade provides an extended-temperature option for industrial environments where operating temperature range matters more than the cost of the standard /I grade.

A PIC microcontroller is a compact embedded-control processor designed around a RISC architecture, program Flash, data RAM, and integrated peripherals. The PIC16F676 belongs to Microchip's 16F family and combines an 8-bit CPU, configurable I/O, ADC inputs, timer resources, and internal oscillator functions in one device. Its 35 single-word instructions and 200 ns instruction execution time provide a simple architecture for control, measurement, and monitoring products.

Key features include 1.75 KB of Flash organized as 1K x 14 words, 64 bytes of RAM, a 10-bit analog-to-digital converter, and 12 I/O pins. The 20 MHz maximum instruction clock supports time-sensitive control loops and communication routines. A 16-QFN 4 x 4 mm package reduces board area compared with leaded packages, while the exposed thermal pad improves heat transfer when the device operates at elevated clock or ambient temperatures.

The PIC16F676 architecture is suited to applications requiring more analog measurement capability than a basic digital controller but only modest program and data memory. Its integrated 10-bit ADC can measure resistive, voltage, and sensor signals through configurable analog inputs. The 8-bit CPU provides straightforward instruction execution, while internal oscillator options support economical designs that do not require an external crystal. The manufacturer datasheet also identifies the PIC16F630 and PIC16F676 as identical except for the ADC, making the PIC16F676 the appropriate choice when analog conversion is required.

Typical uses include compact industrial controllers, digital thermometers, analog sensor interfaces, LED and lighting controllers, appliance control panels, and low-cost embedded measurement systems. The device can be programmed in-circuit through its programming interface, supporting development, production programming, and field configuration workflows.

When laying out a 16-QFN board, route the exposed pad to a thermal and ground plane and follow the manufacturer land-pattern and soldering guidance. Decoupling should be placed directly across the supply pins, while analog and programming signals should be kept away from noisy switching nodes. Firmware should also include startup, ADC calibration, and input-protection checks appropriate to the final system.

Drop-in alternatives for PIC16F676-E/ML — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with PIC16F676-E/ML (same form factor and footprint) — differing in Package, Timers, Operating Voltage Range, ADC, Data EEPROM.

Microchip Technology
Package: 16-pin QFN (ML), 4x4 mm with exposed pad
Timers: Timer0 (8-bit), Timer1 (16-bit), WDT with dedicated oscillator
Data EEPROM: 128 bytes
Microchip Technology
Package: QFN-14 (ML), 4x4 mm
Timers: 1 x 8-bit, 1 x 16-bit
Operating Voltage Range: 2.0 V to 5.5 V
Microchip Technology
Package: 28-pin QFN (6x6 mm) with exposed pad
Timers: 2 (Timer0 8-bit, Timer1 16-bit)
Operating Voltage Range: 2.0 V to 5.5 V

PIC16F676-I/ML

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 16-QFN (4 x 4 mm)
PIC16F · 8-bit PIC RISC, 14-bit instruction word · 35 single-word instructions · 1.75 KB (1K x 14) · 64 bytes · 128 bytes · 20 MHz · 200 ns at 20 MHz

Contact for price

View Datasheet →

PIC16F676A-I/ML

✅ Drop-In ⚠️ Specs Unverified
📦 16-QFN (4 x 4 mm)
Revision-qualified PIC16F676A device in the industrial /I grade; retains the 20 MHz core, 1.75 KB Flash, 10-bit ADC, and 16-QFN footprint, with silicon revision changes requiring firmware qualification.

📋 Reference alternative (not in catalog)

PIC16F676A-E/ML

✅ Drop-In ⚠️ Specs Unverified
📦 16-QFN (4 x 4 mm)
Revision-qualified PIC16F676A device with the extended /E temperature option; key electrical ratings remain equivalent, while the revised silicon must be validated against the original firmware.

📋 Reference alternative (not in catalog)

PIC16F676-E/ML Maximum Ratings & Electrical Characteristics

Device Type 8-bit RISC Flash microcontroller
Maximum Clock Frequency 20 MHz
Program Memory 1.75 KB Flash (1K x 14 words)
Data Memory 64 bytes RAM
Instruction Set 35 single-word instructions
Instruction Execution Time 200 ns
ADC Resolution 10-bit
I/O Pin Count 12 pins
Operating Voltage Range 2 V to 5.5 V
Package 16-QFN (4 x 4 mm)
Package Type VQFN with exposed pad
Mounting Type Surface mount
Shipping Format Tube
RoHS Status Compliant
REACH Status unknown
AEC-Q100 Qualification not_applicable

PIC16F676-E/ML vqfn with exposed pad Pin Configuration Guide

Pin configuration for PIC16F676-E/ML (vqfn with exposed pad package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

vqfn with exposed pad package pinout diagram for PIC16F676-E/ML

No detailed pinout data available for PIC16F676-E/ML.

Refer to the datasheet for full pin configuration.

Typical Applications

PIC16F676-E/ML is suitable for 6 applications: Industrial Sensor Interface, Digital Thermometer and Meter, LED Lighting Controller, Appliance Control Board, Programmable Logic Controller, Battery-Powered Monitor.

🏭

Industrial Sensor Interface

The PIC16F676-E/ML fits compact sensor-conditioning products that need direct analog measurement without a larger mixed-signal processor. Its 10-bit ADC and 12 I/O pins can support switches, indicators, and several sensor inputs while the 20 MHz core handles acquisition sequencing and control logic. The 2 V to 5.5 V operating range also supports low-voltage industrial sensor buses and portable instruments. Firmware should average or filter ADC readings, calibrate offset and gain, and reject out-of-range inputs. Because the 16-QFN package has an exposed pad, the PCB should provide continuous ground and thermal copper beneath the device, while decoupling capacitors must be placed close to the supply pins.

📱

Digital Thermometer and Meter

A PIC16F676-E/ML can implement a standalone digital thermometer or panel meter with a display, keypad, and resistive sensor. The 10-bit ADC provides sufficient resolution for many thermistor, potentiometer, and divider-based measurements, while the 20 MHz CPU supports responsive display updates and debounced user input. Its 1.75 KB of Flash is suitable for a focused application with calibration tables, display formatting, and a small state machine. Designers should calculate the sensor-divider current to balance resolution against self-heating, apply periodic offset calibration, and isolate analog input routing from display and switching signals. The exposed pad should connect to the ground plane to improve heat spreading.

💡

LED Lighting Controller

The PIC16F676-E/ML can drive LED status indicators, decorative lighting sequences, or small constant-current LED modules. Twelve I/O pins provide enough connections for multiple channels, buttons, and fault signals, while the 20 MHz clock allows precise timing for dimming and effects. Its 64 bytes of RAM are adequate for channel state, counters, and basic animation parameters. Firmware should use timer-based scheduling rather than blocking delays, implement a default-off state after reset, and limit total LED current within system limits. Decoupling capacitors should be located at the MCU supply pins, and the QFN exposed pad should be tied to ground to reduce temperature gradients during repeated switching.

🔧

Appliance Control Board

The PIC16F676-E/ML is appropriate for compact appliance controls that combine a few inputs, an analog measurement channel, and simple actuator outputs. The 8-bit core and 35 single-word instructions simplify deterministic control of relays, indicators, heaters, or motor-control interfaces, while the 1.75 KB Flash can hold a focused state machine and safety checks. The 12 I/O pins allow external buttons, interlocks, and status LEDs to share the controller. Firmware should include debouncing, actuator timing, fault latching, and safe output states during startup or reset. Protect outputs against inductive transients and maintain separation between the exposed-pad ground return and noisy switching paths.

🏭

Programmable Logic Controller

The PIC16F676-E/ML can implement a small PLC or fixed-function controller for lighting panels, test equipment, pumps, and simple machines. Its 20 MHz execution rate supports responsive input scanning and timed outputs, while the 10-bit ADC adds analog supervision where required. Twelve I/O pins provide a useful mix of discrete and analog-capable channels for a compact embedded controller. A robust design should use timer interrupts, deterministic debounce logic, watchdogs where applicable, and explicit output states after reset. The 16-QFN land pattern requires careful assembly control, and the exposed pad must be connected to a solid thermal and ground plane for reliable operation over temperature.

⚡

Battery-Powered Monitor

The PIC16F676-E/ML can serve as the controller in a small battery-powered monitoring product because its 2 V to 5.5 V operating range accommodates common low-energy supply rails. The 10-bit ADC is useful for battery-voltage measurement, while the 20 MHz core can execute wake-up logic, threshold checks, and data logging between long idle periods. The 64 bytes of RAM limits how much history can be buffered at once, so persistent storage or a serial interface may be required for extended records. Firmware should select the lowest acceptable clock and disable unused peripherals where possible. The compact QFN footprint helps reduce board area, but its exposed pad requires careful assembly and thermal design.

What is the PIC16F676-E/ML?
The PIC16F676-E/ML is a Microchip 8-bit Flash PIC microcontroller with a 20 MHz maximum clock, 1.75 KB of program memory, 64 bytes of RAM, 12 I/O pins, and a 10-bit ADC in a 16-QFN package. According to the Microchip PIC16F630/676 data sheet, it uses 35 single-word instructions and executes each instruction in as little as 200 ns.
Where can I download the PIC16F676 datasheet PDF?
The official PIC16F630/676 data sheet is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/40039F.pdf. It covers the PIC16F676 architecture, Flash memory, ADC, electrical characteristics, package variants, and the relevant device pin descriptions. Use the manufacturer document when assigning PCB pins or designing the programming interface.
What does the PIC16F676 pinout diagram show?
The PIC16F676 pinout identifies the power pins, ground connections, programmable I/O pins, oscillator-related pins, and ADC-capable inputs for the selected package. The PIC16F676-E/ML uses a 16-QFN 4 x 4 mm footprint with an exposed pad, so the pad must also be connected according to the manufacturer land-pattern guidance. Confirm each signal against the package-specific pin table before routing copper.
How do I program a PIC16F676-E/ML?
The PIC16F676-E/ML is programmed through its serial programming interface, with programming and debug activity connected to designated I/O pins. The device uses 35 single-word instructions and can execute an instruction in 200 ns according to the Microchip data sheet. For production designs, use the supported programmer and programming specification matching the exact package and device variant.
What are the key specifications of PIC16F676-E/ML that engineers should know?
The PIC16F676-E/ML combines a 20 MHz 8-bit RISC core, 1.75 KB of Flash, 64 bytes of RAM, 12 I/O pins, a 10-bit ADC, and a 2 V to 5.5 V operating range. It is offered in a compact 16-QFN 4 x 4 mm package with an exposed pad. These values make it appropriate for small embedded-control and analog-measurement designs.
Where can I buy PIC16F676-E/ML and check its availability?
Use the Request a Quote form on this page to request current PIC16F676-E/ML pricing, stock, lot-size information, and delivery schedule. Quote requests allow the order to be matched to the exact 16-QFN tube-packaged MPN and any required production quantities. Availability and lead time should be confirmed for the current order rather than inferred from historic inventory.
What is the price of PIC16F676-E/ML?
Current pricing for the PIC16F676-E/ML is best requested through the Request a Quote form on this page. The form should identify the exact MPN, package, tube packaging, target quantity, and required delivery date. This avoids publishing a stale market price while allowing the quotation to reflect current component availability and volume.
What is the lead time for PIC16F676-E/ML?
The current lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. State the required production quantity, desired shipment date, and whether additional assembly or inspection documentation is needed. The device is identified as a 16-QFN tube-packaged part, so the quotation will preserve that package and ordering configuration.
Is PIC16F676-E/ML currently in stock?
Current stock for PIC16F676-E/ML should be confirmed through the Request a Quote form on this page. Submit the exact MPN and quantity so inventory can be matched to the correct 16-QFN package and tube configuration. Avoid treating a catalog listing as a firm stock commitment without written confirmation for the requested lot.
What can replace PIC16F676-E/ML?
A true drop-in replacement must use the same 16-QFN footprint, preserve pin functions, and match the controller's memory, ADC, clock, and voltage requirements. PIC16F676-I/ML and revision-qualified PIC16F676A variants are the closest same-family choices, but temperature grade or device revision must be checked against the original qualification. Use the manufacturer pin and cross-reference tools before approving a substitution.
Is PIC16F676-E/ML the same as PIC16F676-I/ML?
The PIC16F676-E/ML and PIC16F676-I/ML use the same 16-QFN 4 x 4 mm package and belong to the same PIC16F676 family, but their temperature-grade options differ. The /E version is the extended-temperature choice, while /I identifies the industrial grade. Verify the required ambient range, existing PCB footprint, and programmer settings before treating them as interchangeable.
PIC16F676-E/ML vs PIC16F676-I/ML: which is better for industrial control?
The PIC16F676-E/ML is generally the stronger choice when the operating environment extends beyond the standard industrial-temperature qualification, while the PIC16F676-I/ML is suitable when the required ambient range stays within the /I limits. Both retain the 20 MHz 8-bit architecture, 1.75 KB Flash, 10-bit ADC, and 16-QFN footprint. The decision should follow the enclosure temperature and reliability requirements.
When should I choose PIC16F676-E/ML over an ATTINY44A-MUR?
Choose the PIC16F676-E/ML when its 10-bit ADC, 20 MHz clock, 35-word instruction set, and 1.75 KB Flash match an existing PIC code base or design requirement. The ATTINY44A-MUR offers a different AVR architecture, so a board-level substitution also requires firmware, toolchain, and timing review. The package fit alone does not make the two controllers software-compatible.
What is the best Microchip equivalent for PIC16F676-E/ML?
The closest Microchip-family alternatives are PIC16F676-I/ML and the PIC16F676A revision-qualified variants in the same 16-QFN package. The preferred choice depends on temperature range, silicon revision, qualification status, and whether the original firmware has been validated against the newer revision. A package-compatible part is not automatically a complete functional replacement.
Can PIC16F676-E/ML be used for an analog sensor circuit?
Yes, the PIC16F676-E/ML is suitable for compact analog sensor interfaces because it includes a 10-bit ADC, 12 I/O pins, and a 2 V to 5.5 V operating range. The sensor output must remain within the ADC input limits, and the firmware should include calibration and filtering. The exposed pad should also be tied to a suitable ground or thermal plane.
How should a PIC16F676-E/ML QFN PCB be laid out?
Place the exposed pad on a connected copper area and follow the manufacturer's 16-QFN land pattern to preserve solderability and thermal performance. Put supply decoupling close to the device and provide a clean ground return for the ADC and oscillator circuitry. Keep programming, analog, and switching signals separated where noise could affect measurement accuracy.

Engineering reference data for PIC16F676-E/ML — comparison, design guidance, and compliance information.

Selection Guide

Choose PIC16F676-E/ML for a compact embedded-control design that needs a 20 MHz 8-bit PIC core, 1.75 KB of Flash, a 10-bit ADC, and the extended /E temperature option in a 16-QFN footprint. PIC16F676-I/ML is appropriate when the industrial /I temperature range is sufficient and its original PIC16F676 silicon is preferred. PIC16F676A-I/ML or PIC16F676A-E/ML can serve as same-package options, but their revised silicon should be qualified with the original firmware, configuration words, ADC measurements, and timing tests. None of these alternatives changes the fundamental pin arrangement, so a software and qualification review is necessary even when the PCB footprint matches. Parts in other packages or with different architectures may require board changes or a complete firmware port and therefore are not direct replacements.

Comparison with Alternatives

Parameter This Product PIC16F676-I/ML PIC16F676A-I/ML PIC16F676A-E/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 16-QFN (4 x 4 mm) 16-QFN (4 x 4 mm) 16-QFN (4 x 4 mm) 16-QFN (4 x 4 mm)
CPU Architecture 8-bit RISC 8-bit RISC 8-bit RISC 8-bit RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Program Memory 1.75 KB Flash 1.75 KB Flash 1.75 KB Flash 1.75 KB Flash
ADC Resolution 10-bit 10-bit 10-bit 10-bit
Operating Voltage Range 2 V to 5.5 V 2 V to 5.5 V 2 V to 5.5 V 2 V to 5.5 V
Temperature Grade Extended /E Industrial /I Industrial /I Extended /E
Silicon Revision Original PIC16F676 Original PIC16F676 PIC16F676A revision PIC16F676A revision
Programming Compatibility PIC16F676 serial programming interface Same family programming interface Same family programming interface; validate revision Same family programming interface; validate revision

Key Differentiators

  • Integrated conversion for compact analog-control designs (vs PIC16F676-I/ML)
  • Extended-temperature option within the same footprint (vs PIC16F676-I/ML)
  • Revision-qualified drop-in family option (vs PIC16F676A-I/ML)

Design Notes

Use the manufacturer land pattern for the 16-QFN 4 x 4 mm package and connect the exposed pad to the ground or designated thermal plane. Place input and output decoupling capacitors immediately adjacent to their supply pins. Keep programming-trace geometry away from ADC inputs and switching nodes, and provide adequate assembly clearance around the package edges for reliable solder joints.

Design the supply rail for the device's 2 V to 5.5 V operating range and account for startup current as well as active consumption. Place the primary bypass capacitor close to the supply pins and add bulk capacitance at the regulator output according to its stability behavior. Do not infer the internal oscillator or ADC reference accuracy from supply voltage without checking the manufacturer electrical characteristics.

Do not treat a same-package replacement as automatically firmware-compatible. PIC16F676 revision-qualified devices should be programmed and tested against the existing application, including ADC behavior, oscillator startup, watchdog settings, and configuration words. Verify the selected temperature grade against the enclosure's maximum and minimum ambient conditions before approving a substitution.

For analog measurements, route the sensor signal away from digital clocks and programming signals, keep the input impedance high, and calibrate gain and offset in firmware. The 10-bit ADC benefits from stable reference and supply conditions. If PWM, relays, or switching loads are present, synchronize their transitions away from precision acquisition windows where practical.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The product listing identifies the device as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified.

Related Searches

PIC16F676-E/ML datasheet PIC16F676-E/ML pinout PIC16F676-E/ML programming PIC16F676-E/ML equivalent PIC16F676-E/ML price PIC16F676 pinout diagram PIC16F676 circuit diagram PIC16F676 projects with source code PIC16F676 vs PIC16F676-I/ML Microchip PIC16F676-E/ML PIC16F676 replacement PIC16F676 16-QFN application circuit

Related Components & Terms

Microchip Technology PIC16F676-E/ML PIC16F676-I/ML PIC16F676A-I/ML PIC16F676A-E/ML PIC16F676 PIC16F630 PIC16 8-bit RISC microcontroller Flash memory 10-bit ADC 20 MHz instruction clock 64-byte RAM 16-QFN VQFN exposed pad surface mount RoHS REACH AEC-Q100 in-circuit programming industrial control sensor interface embedded control
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details