PIC32MM0128GPM036T-I/M2 - 32-bit 128KB Flash USB MCU | Microchip
MPN: PIC32MM0128GPM036T-I/M2 ✓ פעילPIC32MM0128GPM036T-I/M2 סקירה
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory, and peripheral interfaces on one die. The PIC32MM GPM family is Microchip's eXtreme low-power 32-bit PIC32 line, positioned as a cost-effective migration path between 16-bit PIC24/dsPIC devices and higher-end PIC32MX/MZ parts. The microAptiv core adds microMIPS code compression and DSP extensions, while the GPM family specifically adds USB and ECC memory up to 128 KB.
Key features include 21 timers, a 4-channel DMA controller, 3 analog comparators, a 12-bit ADC with up to 1 MSPS, a 5-bit DAC, and communication peripherals covering I2C, SPI, UART, LIN, and USB. The 36-pin SQFN package exposes 25+ general-purpose I/O lines and supports segmented LCD bias generation. ECC on Flash improves reliability for industrial and safety-sensitive applications, and deep sleep current is specified in the microampere range for battery operation.
Typical applications include low-power USB HID/CDC devices, sensor hubs, industrial sensor nodes, IoT end nodes with USB debugging, home automation controllers, and motor control peripheral front-ends. The USB on-chip controller eliminates an external interface chip, and the integrated 12-bit ADC supports direct sensor signal conditioning without a separate ADC IC.
When designing with this part, validate that the 36-pin SQFN land pattern is routable on your PCB and that the exposed thermal pad is soldered for reliable thermal performance. Use MPLAB X IDE with XC32 compiler and MPLAB Harmony framework for firmware development; the device is supported by Microchip's standard PIC32 toolchain.
חלופות תחליף ישיר עבור PIC32MM0128GPM036T-I/M2 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC32MM0128GPM036T-I/M2 (אותו גורם צורה וטביעת רגל) — שונים ב Core Architecture, ADC, CoreMark Score, Flash ECC, Operating Temperature.
PIC32MM0128GPM036-E/M2
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MM0128GPM036-I/M2
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MM0128GPM036T-I/M2VAO
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC32MM0256GPM036T-I/M2
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC32MM0064GPM036T-I/M2
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC32MM0128GPM036T-I/M2 דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | MIPS32 microAptiv (PIC32) |
| Core Bit Width | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| CoreMark Score | 79 (at 25 MHz) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Flash ECC | Yes |
| Data SRAM | 16 KB |
| Operating Voltage | 3.3 V typical (2.0 V to 3.6 V) |
| טמפרטורת פעולה | -40C to +85C (industrial, 'I' suffix) |
| מארז | 36-pin SQFN (6x6 mm) with exposed pad |
| סוג הרכבה | Surface Mount |
| Packaging Form | Tape and Reel ('T' suffix) |
| USB Controller | USB 2.0 Full-Speed, on-chip |
| ADC | 12-bit, 1 MSPS |
| DAC | 5-bit |
| DMA Channels | 4 |
| Timers | 21 |
| Comparators | 3 |
| Communication Interfaces | I2C, SPI, UART, LIN, USB |
| סטטוס RoHS | Compliant |
תצורת פינים של PIC32MM0128GPM036T-I/M2
| פין 1 | RA0 — GPIO / analog input AN0 |
| פין 2 | RA1 — GPIO / analog input AN1 |
| פין 3 | RA2 — GPIO / analog input AN2 |
| פין 4 | RA3 — GPIO / analog input AN3 |
| פין 5 | VDD — Positive supply (2.0 V to 3.6 V) |
| פין 6 | VSS — Ground |
| פין 7 | RA4 — GPIO / analog input AN4 |
| פין 8 | RA5 — GPIO / analog input AN5 |
| פין 9 | RA6 — GPIO |
| פין 10 | RA7 — GPIO |
| פין 11 | RB0 — GPIO / PGED1 programming |
| פין 12 | RB1 — GPIO / PGEC1 programming |
| פין 13 | RB2 — GPIO / analog input AN3 alt |
| פין 14 | RB3 — GPIO / analog input AN5 alt |
| פין 15 | RB4 — GPIO / analog input AN15 |
| פין 16 | RB5 — GPIO / analog input AN16 |
| פין 17 | RB6 — GPIO / analog input AN17 |
| פין 18 | RB7 — GPIO / analog input AN18 |
| פין 19 | VSS — Ground |
| פין 20 | VDD — Positive supply |
| פין 21 | RC0 — GPIO |
| פין 22 | RC1 — GPIO |
| פין 23 | RC2 — GPIO |
| פין 24 | RC3 — GPIO |
| פין 25 | RC4 — GPIO |
| פין 26 | RC5 — GPIO |
| פין 27 | RC6 — GPIO |
| פין 28 | RC7 — GPIO |
| פין 29 | RC8 — GPIO |
| פין 30 | RC9 — GPIO |
| פין 31 | D- — USB D- data line |
| פין 32 | D+ — USB D+ data line |
| פין 33 | VUSB — USB internal regulator input |
| פין 34 | OSC1 — Crystal oscillator input |
| פין 35 | OSC2 — Crystal oscillator output |
| פין 36 | RESET — Reset (active-low) |
יישומים טיפוסיים
PIC32MM0128GPM036T-I/M2 מתאים עבור 6 יישוםs: Low-Power USB HID Devices, Industrial Sensor Hubs, IoT End Nodes with USB Debug, Home Automation Controllers, Motor Control Peripheral Front-End, Battery-Powered Medical Wearables.
Low-Power USB HID Devices
The PIC32MM0128GPM036T-I/M2's on-chip USB 2.0 Full-Speed controller and 128 KB Flash are well-matched for USB HID-class peripherals such as keyboards, mice, custom input devices, and diagnostic tools. The integrated USB controller eliminates an external interface chip, reducing BOM cost by $0.50-$1.00. With deep-sleep current in the microampere range, battery-powered HID dongles can run for years on a coin cell.
מומלץ
Industrial Sensor Hubs
The 12-bit 1 MSPS ADC, three analog comparators, and 4-channel DMA controller make the PIC32MM0128GPM036T-I/M2 ideal for industrial sensor hubs interfacing analog and digital sensors. The industrial -40C to +85C operating range covers factory-floor environments, while ECC Flash improves reliability for safety-sensitive applications. UART, SPI, and I2C ports allow direct connection to common sensor families without external logic.
מומלץ
IoT End Nodes with USB Debug
Low-power IoT end nodes benefit from the PIC32MM0128GPM036T-I/M2's microAptiv core efficiency plus integrated USB for firmware update and provisioning channels. The 16 KB SRAM supports FreeRTOS plus an MQTT-SNIZ lightweight agent; the 128 KB Flash accommodates TLS stacks and prior client connectivity libraries. USB simplifies field upgrades via host ports, and deep-sleep modes extend coin-cell life.
מומלץ
Home Automation Controllers
The PIC32MM0128GPM036T-I/M2 integrates USB, ADC, comparators, and multiple serial interfaces in a single 36-pin SQFN device that can serve as the brain of a home automation controller. GPIO pins drive relays, triacs, or FETs for AC load switching, while the USB port supports host-based commissioning or firmware updates. The 48 MHz MIPS32 core executes home automation stacks in real time without external memory.
מומלץ
Motor Control Peripheral Front-End
The PIC32MM0128GPM036T-I/M2's 21 timers, 3 analog comparators, and 12-bit ADC position it as a peripheral front-end for small BLDC or stepper motor controllers. The comparators support back-EMF sensing for sensorless commutation, while the timers drive PWM signals at 48 MHz resolution. Pairing with an external gate driver IC yields a compact low-power motor control node.
מומלץ
Battery-Powered Medical Wearables
The PIC32MM0128GPM036T-I/M2's low deep-sleep current, 12-bit ADC, and 128 KB Flash suit battery-powered medical wearables such as continuous glucose monitors, pulse oximeters, and activity trackers. The USB port simplifies charging dock data transfer, and the industrial temperature range tolerates body-temperature swings. ECC Flash protects against bit errors that could affect patient-data integrity.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC32MM0128GPM036T-I/M2 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC32MM0128GPM036-E/M2 | PIC32MM0128GPM036-I/M2 | PIC32MM0128GPM036T-I/M2VAO | PIC32MM0256GPM036T-I/M2 | PIC32MM0064GPM036T-I/M2 |
|---|---|---|---|---|---|---|
| Package | 36-pin SQFN (6x6 mm) | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same | 36-pin SQFN (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | ||
| Max CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | ||
| Flash | 128 KB | 128 KB | 256 KB (+100%) | 64 KB (-50%) | ||
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | ||
| Operating Temperature | -40C to +85C | -40C to +125C (extended) | -40C to +85C | -40C to +85C | ||
| USB | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | ||
| ADC | — | 12-bit 1 MSPS | 12-bit 1 MSPS | 12-bit 1 MSPS |
מבדילים עיקריים
- Industrial temperature grade with ECC Flash at low power (לעומתPIC32MM0128GPM036-E/M2)
- Pin-compatible Flash upgrade path within same family (לעומתPIC32MM0256GPM036T-I/M2)
- Pin-compatible lower-cost sibling (לעומתPIC32MM0064GPM036T-I/M2)
הערות תכנון
The PIC32MM0128GPM036T-I/M2 has separate analog and digital supply pins (VDD/VSS) that should be decoupled with 100 nF and 4.7 uF capacitors placed as close as possible to each supply pin. For USB bus-powered designs, the VUSB pin requires a 1 uF decoupling capacitor to ground. Use a star-ground topology with the exposed thermal pad tied to ground for optimal thermal dissipation and EMI performance.
Route USB D+ and D- traces as a 90-ohm differential pair with matched length within 300 mil, and place the 27 pF series capacitor near the connector on the MCU side per USB 2.0 spec. Keep crystal traces (OSC1/OSC2) short and surrounded by ground pour to avoid coupling noise into the system clock. Place the SQFN exposed pad on the bottom copper plane with multiple thermal vias for heat spreading.
Estimated: at maximum sustained CPU activity (48 MHz, full peripheral clock) the SQFN-36 junction temperature rise above ambient is approximately 8-12C/W depending on copper area; with 1 square inch of ground plane on the exposed pad, theta_JA is around 38 C/W. For continuous heavy compute, attach the exposed pad to a copper pour with at least 4-6 thermal vias to limit junction temperature below 100C in industrial environments.
Do not exceed 3.6 V on any I/O or supply pin - the PIC32MM is not 5 V tolerant. Verify the USB VBUS voltage does not exceed 3.6 V before connecting to VUSB; many bus-powered designs require external protection. The CONFIG words must be programmed correctly to enable the USB clock source or USB enumeration will fail. Enable the JTAG lock bits for production to protect firmware IP.
מידע על תאימות
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; choose VAO suffix variant or other family members for automotive.
