Skyworks Solutions

SI3220-G-FQ - Dual-Channel SLIC/Codec 64-TQFP | Skyworks

MPN: SI3220-G-FQ ✓ פעיל
3.3 V or 5 V Vdss 65 mA Id 64-pin TQFP, 10 mm x 10 mm Package
כמות הזמנה מינימלית: 1 |

SI3220-G-FQ סקירה

The Skyworks Solutions SI3220-G-FQ is a dual-channel Subscriber Line Interface Concept and codec integrated circuit with internal 65 Vrms balanced ringing, internal diagnostics, GCI, PCM, and SPI interfaces, and a 65 mA operating supply current. It is packaged in a 64-pin TQFP measuring 10 mm by 10 mm for surface-mount telecom and voice-over-IP equipment.

A Subscriber Line Interface Concept, or SLIC, is the analog-facing portion of a voice terminal device. It interfaces with the telephone line, provides line-driving and sensing functions, and works alongside a codec that converts between analog voice signals and digital PCM data. The SI3220-G-FQ integrates both functions into one device, reducing board area and simplifying the connection between the line interface and the system controller.

Key features include two integrated voice channels, support for 3.3 V and 5 V operation, a typical operating supply current of 65 mA, and internal balanced ringing rated at 65 Vrms. The GCI interface supports general-purpose hardware control, while PCM and SPI interfaces provide digital links to codecs, DSPs, and system controllers. Operating temperature is specified from 0°C to 70°C, and the device is offered in a lead-free 64-TQFP package.

The SI3220-G-FQ is implemented as a programmable CMOS SLIC and codec. Its integrated ringing and diagnostics features help a system detect line conditions and reduce reliance on external test equipment. Because the device is designed for subscriber-line access, its operating characteristics and interface set must be evaluated together with the target line voltage, transformer or external termination network, digital host interface, and regional voice requirements.

Typical applications include voice-over-IP analog adapters, digital subscriber line equipment, voice gateways, analog terminal adapters, central-office line-card modules, and carrier-grade voice interfaces. The dual-channel architecture allows one package to serve two analog voice paths, provided the board satisfies the appropriate line-isolation, surge, thermal, and routing requirements.

Designers should follow the manufacturer reference circuit for line termination, ringing capacitors, clocking, digital interfaces, and decoupling. Because this is a line-facing integrated circuit, printed-circuit-board creepage, isolation components, protection networks, and analog-versus-digital partitioning can be as important as the logic interface itself. Confirm the exact pin arrangement and recommended external network against the manufacturer datasheet before layout release.

This page combines the device specifications, package information, drop-in alternatives, application guidance, and design notes needed to evaluate the SI3220-G-FQ for telecom, voice gateway, and subscriber-line designs.

חלופות תחליף ישיר עבור SI3220-G-FQ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם SI3220-G-FQ (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature, Package, Supply Voltage, Device Type, Line Functions.

Skyworks Solutions
Package: 64-TQFP, 10 mm × 10 mm
Line Functions: Complete BORSCHT functions
השווה עם SI3220-G-FQ →
Skyworks Solutions
Operating Temperature: -40 °C to +85 °C
Package: 64-TQFP, 10 mm x 10 mm
Supply Voltage: 3.3 V and 5 V
השווה עם SI3220-G-FQ →
Skyworks Solutions
Operating Temperature: -40 °C to 85 °C
Package: 64-TQFP, 10 mm x 10 mm
Supply Voltage: 3.3 V and 5 V
השווה עם SI3220-G-FQ →

SI3220-G-GQ

✅ Drop-In
Skyworks Solutions
📦 64-TQFP (10x10 mm)
Dual-Channel SLIC/CODEC Telecom Interface IC · 2 channels · GCI, PCM, and SPI · 3.3 V and 5 V · 65 mA · 941 mW · -40 °C to +85 °C · 65 Vrms balanced

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

SI3220-FQ

✅ Drop-In
Skyworks Solutions
📦 64-TQFP (10x10 mm)
Dual-channel SLIC and codec interface IC · 2 channels · GCI, PCM, and SPI · 3.3 V or 5 V · 65 mA · 941 mW · 0°C to 70°C · 65 Vrms

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

SI3220-G-GQR

✅ Drop-In
📦 64-TQFP (10x10 mm)
Same SI3220-G family, 64-TQFP footprint, and dual-channel function; GQR adds a reel-oriented ordering suffix

📋 חלופה להתייחסות (לא בקטלוג)

SI3220-G-FQ מפרטים

Device Type Dual-channel SLIC and codec interface IC
Number of Channels 2 channels
Interfaces GCI, PCM, and SPI
מתח אספקה 3.3 V or 5 V
Operating Supply Current 65 mA
Internal Balanced Ringing 65 Vrms
Internal Diagnostics Supported
Power Dissipation 941 mW
טמפרטורת פעולה 0°C to 70°C
מארז 64-pin TQFP, 10 mm x 10 mm
סוג הרכבה Surface mount
Lead-Free Status Lead-free
Moisture Sensitivity Level MSL 3, 168 hours
Packaging Tray
Technology Programmable CMOS
BORSCHT Functions Supported
Target Line Rate Up to 18 kft

מדריך תצורת פינים של SI3220-G-FQ 64-pin tqfp, 10 mm x 10 mm

תצורת פינים עבור SI3220-G-FQ (מארזת 64-pin tqfp, 10 mm x 10 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 64-pin tqfp, 10 mm x 10 mm עבור SI3220-G-FQ

אין נתוני פריסת פינים מפורטים עבור SI3220-G-FQ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SI3220-G-FQ מתאים עבור 6 יישוםs: Voice-over-IP Analog Terminal Adapter, Dual-Channel Voice Gateway, Subscriber Line Access Equipment, Analog Terminal Adapter, Carrier Voice Interface Card, Analog Voice Fax and Data Terminal.

🌐

Voice-over-IP Analog Terminal Adapter

The SI3220-G-FQ fits a two-channel voice-over-IP terminal adapter that must connect analog subscriber lines to a digital voice processor. Its two integrated SLIC and codec channels provide a compact bridge between line-side signaling and digital PCM or SPI connectivity, while the 65 mA operating current and 3.3 V or 5 V supply operation simplify digital rail integration. Internal balanced ringing rated at 65 Vrms can reduce external line-side circuitry, but the manufacturer-recommended termination, coupling, surge protection, and isolation network remains essential. Use the PCM interface where a codec bus is available, or SPI and GCI where the host controls signaling directly. The 64-TQFP footprint requires careful separation of sensitive line routing from digital clocks.

🖥️

Dual-Channel Voice Gateway

A voice gateway can use the SI3220-G-FQ to provide two analog subscriber-line channels without allocating a separate SLIC and codec package to every port. The device combines programmable CMOS line-interface functions with PCM, SPI, and GCI connectivity, allowing a gateway controller to supervise call states and route narrowband voice traffic. The listed 941 mW power figure and 65 mA supply current make rail budgeting straightforward, while the 0°C to 70°C range suits commercial telecom equipment. Designers should budget PCB area for line protection and isolation and place the 64-TQFP away from noisy switching regulators and high-current line-driver stages.

📞

Subscriber Line Access Equipment

The SI3220-G-FQ is applicable to subscriber line access and digital-to-analog line-interface modules requiring two voice channels. Its integrated balanced ringing, internal diagnostics, and BORSCHT-related line functions help implement subscriber-side signaling within a compact design. Because the device is line-facing, correctness depends on the complete analog network rather than the digital interface alone. Use the manufacturer reference circuit to select the termination and ringing values, and maintain the required separation between external line connections and low-level digital signals. The 10 mm by 10 mm 64-TQFP package also supports assembly methods commonly used in telecom interface boards.

☎️

Analog Terminal Adapter

In an analog terminal adapter, the SI3220-G-FQ can provide two subscriber-line voice channels with a single mixed-signal IC. The GCI, PCM, and SPI interfaces allow connection to a channel controller, DSP, or gateway processor while internal 65 Vrms balanced ringing supports line-signalling requirements. The 3.3 V or 5 V supply choice helps align the codec side with the host platform, and the lead-free 64-TQFP package supports standard surface-mount assembly. Layout must prevent line-side transients and ringing-current paths from coupling into the PCM or SPI nets, and the external protection network must be selected for the target deployment environment.

🏭

Carrier Voice Interface Card

The SI3220-G-FQ is suited to a carrier voice interface card that converts two analog line channels into digital voice streams for central-office or access equipment. Its dual-channel architecture provides a direct fit when the card requires two subscriber interfaces, while internal diagnostics can support production testing and field troubleshooting. The 65 mA operating current is useful for per-channel thermal and power budgeting, and the 0°C to 70°C specification covers typical indoor telecom environments. Confirm line voltage, ring cadence, impedance, and protection requirements against the exact product deployment rather than treating the IC as a universal analog telephone front end.

🔧

Analog Voice Fax and Data Terminal

Legacy terminal equipment that combines analog voice with modem signaling can use the SI3220-G-FQ where two line channels are needed. The SLIC and codec integration reduces the number of mixed-signal packages compared with a separate line interface and codec design, and the GCI interface offers host control of line-related functions. The 3.3 V or 5 V operation accommodates different terminal architectures, while the 64-TQFP package simplifies inspection and rework. Validate the external network and ringing behavior carefully because fax and modem equipment imposes legacy line-timing and impedance requirements that may not match modern voice gateways.

What is the SI3220-G-FQ and what does it do?
The SI3220-G-FQ is a dual-channel Subscriber Line Interface Concept and codec that combines subscriber-line interface functions with digital voice interfaces in one 64-TQFP device. According to the manufacturer data sheet for the SI3220/25 family, it provides two channels, internal 65 Vrms balanced ringing, internal diagnostics, and GCI, PCM, and SPI interfaces. It is intended for subscriber-line, voice gateway, and analog terminal adapter equipment.
What is the operating voltage of SI3220-G-FQ?
The SI3220-G-FQ operates from a 3.3 V or 5 V supply. The listed operating supply current is 65 mA, and the published power figure is 941 mW. According to the SI3220/25 manufacturer data sheet, the interface device supports both nominal supply levels so it can be integrated into 3.3 V or 5 V digital voice designs. External line-side circuitry still requires its own protection and isolation network.
Where can I download the SI3220-G-FQ datasheet PDF?
The SI3220-G-FQ datasheet PDF is available through the manufacturer data-sheet link published by Mouser at https://www.mouser.com/datasheet/2/368/si3220-25-39481.pdf. The document covers the SI3220/25 dual ProSLIC programmable CMOS SLIC and codec family. Use its pin-description table, application circuit, external-network recommendations, and absolute-maximum ratings when laying out a new design.
Where can I find the SI3220-G-FQ pinout?
The SI3220-G-FQ pinout is published in the SI3220/25 manufacturer data sheet, which is available at https://www.mouser.com/datasheet/2/368/si3220-25-39481.pdf. The device has 64 pins in a 10 mm by 10 mm TQFP package. Use the pin-description table and package drawing rather than inferring connections from the interface names, because the package includes both line-side, analog, digital, power, and ground functions.
What are the key specifications of SI3220-G-FQ that engineers should know?
The SI3220-G-FQ is a dual-channel, programmable CMOS SLIC and codec with 3.3 V or 5 V supply operation, 65 mA operating supply current, 941 mW power, and 0°C to 70°C commercial temperature range. Manufacturer documentation also identifies internal 65 Vrms balanced ringing, internal diagnostics, GCI, PCM, and SPI interfaces, and a lead-free 64-pin TQFP package measuring 10 mm by 10 mm.
Is the SI3220-G-FQ a drop-in replacement for SI3220-G-GQ?
The SI3220-G-GQ is the closest documented same-family option in the same 64-TQFP package, but a drop-in decision still requires checking the exact suffix codes and pin-level differences in the manufacturer data sheets. The listed SI3220-G-GQ is also a dual-channel SLIC and codec with GCI, PCM, and SPI interfaces. Verify temperature grade, lead-free status, device revision, and external-network requirements before replacing the SI3220-G-FQ.
What is the best drop-in replacement for SI3220-G-FQ?
The SI3220-G-GQ is the leading drop-in candidate because the manufacturer listing identifies it as a dual-channel SLIC and codec in the same 64-pin 10 mm by 10 mm TQFP package. Its key parameters closely match the SI3220-G-FQ, although the GQ and FQ suffix codes should be checked for orderable-grade and packing differences. No cross-manufacturer equivalent is documented here, so board-level substitution should not be assumed.
Can SI3220-FQ replace SI3220-G-FQ on an existing PCB?
The SI3220-FQ is a dual-channel SLIC and codec from the same family and is documented as a lead-free telecom interface IC, but it should not be treated as an automatic replacement. The SI3220-G-FQ suffix encodes additional ordering information that can affect grade or package treatment, so confirm the pinout, temperature range, ringing implementation, and orderable configuration in the manufacturer data sheet before substituting it.
When should I choose SI3220-G-FQ instead of SI3220-G-GQ?
Choose the SI3220-G-FQ when the original design has been qualified around its exact suffix code and the existing qualified component remains orderable. The SI3220-G-GQ is appropriate when its manufacturer documentation confirms the required grade, pin compatibility, and supply characteristics. Because both devices appear as closely related dual-channel SLIC and codec options in 64-TQFP packages, the decision should be based on the specific BOM suffix and qualification records.
Is SI3220-G-FQ suitable for voice-over-IP adapters?
Yes, the SI3220-G-FQ is suitable for voice-over-IP adapters that require two subscriber-line-facing voice channels. Its two-channel SLIC and codec architecture, GCI, PCM, and SPI interfaces, internal 65 Vrms balanced ringing, and internal diagnostics support compact analog voice terminal designs. The board must still implement the manufacturer-recommended line termination, protection, isolation, and external ringing network.
How much power does the SI3220-G-FQ dissipate?
The SI3220-G-FQ has a listed power dissipation of 941 mW and an operating supply current of 65 mA. The published power value is the device figure for the stated operating conditions, not a universal value at every rail and load. Thermal design should account for the 5 V maximum logic supply, adjacent regulator efficiency, ambient temperature, and the copper area available beneath the 64-pin TQFP.
Does SI3220-G-FQ need external ringing components?
The SI3220-G-FQ provides internal 65 Vrms balanced ringing, but the complete line interface still depends on the external network specified by the manufacturer. Line termination, protection, coupling, and board isolation requirements must be implemented even when ringing generation is integrated. Follow the SI3220/25 reference circuit and keep high-voltage line-side routing separated from digital clocks and SPI signals.
Where can I buy SI3220-G-FQ online?
Use the Request a Quote form on this page to request current SI3220-G-FQ availability, volume pricing, and lead time. Because this interface IC can involve long lifecycle transitions and exact suffix-code matching, request the full manufacturer ordering information with the quotation. Confirm the 64-TQFP lead-free configuration, operating-temperature grade, and authorized-channel sourcing before releasing a purchase order.
What is the lead time for SI3220-G-FQ?
The current lead time for the exact SI3220-G-FQ suffix should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, lifecycle status, packaging format, and the availability of the manufacturer’s 64-TQFP device. Include your forecast volumes and target tray quantity so the supplier can quote the appropriate production schedule.
Is SI3220-G-FQ in stock?
Inventory for the exact SI3220-G-FQ ordering code should be confirmed through the Request a Quote form on this page before designing a new purchase order. The SI3220-G-FQ is a long-lived telecom interface component, but availability may differ between the standard commercial-grade suffix and other package or temperature suffixes. Provide your required quantity and date for a firm availability response.
What is the best Skyworks equivalent for SI3220-G-FQ?
The SI3220-G-GQ is the best-documented Skyworks candidate because it is listed as a dual-channel SLIC and codec with the same 64-TQFP 10 mm by 10 mm package and the same GCI, PCM, and SPI interface family. The suffix difference remains significant, so confirm pin compatibility, temperature grade, lead-free configuration, and electrical limits against both manufacturer data sheets before treating it as a drop-in replacement.

נתוני עזר הנדסיים עבור SI3220-G-FQ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SI3220-G-FQ for a new or maintained dual-channel subscriber-line design that requires the documented 3.3 V or 5 V operation, 65 mA supply current, internal 65 Vrms balanced ringing, and GCI, PCM, and SPI connectivity. The SI3220-G-GQ is the closest listed alternative in the same 64-TQFP footprint, but select it only after confirming its suffix-specific temperature, ordering, and lifecycle details. Use the SI3220-FQ when its manufacturer documentation confirms the required grade and lead-free configuration, especially when internal ringing and diagnostics are essential. The SI3220-G-GQR offers the same family footprint but should be checked for reel-oriented ordering and production logistics. No cross-manufacturer part is documented as a verified pin-compatible substitute, so changing manufacturers would require a full PCB and firmware review rather than a simple component swap.

השוואה עם חלופות

פרמטר מוצר זה SI3220-G-GQ SI3220-FQ SI3220-G-GQR
Package 64-TQFP (10x10 mm) 64-TQFP (10x10 mm) 64-TQFP (10x10 mm) 64-TQFP (10x10 mm)
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions
Device Type Dual-channel SLIC/codec Dual-channel SLIC/codec Dual-channel SLIC/codec Dual-channel SLIC/codec

מבדילים עיקריים

  • Two integrated SLIC and codec channels in one package (לעומתSI3220-G-GQ)
  • Documented internal 65 Vrms balanced ringing (לעומתSI3220-G-GQ)
  • Mixed GCI, PCM, and SPI host connectivity (לעומתSI3220-FQ)
  • Defined commercial operating range (לעומתSI3220-G-GQR)

הערות תכנון

Treat the line-side and codec-side sections as separate high- and low-voltage domains. Follow the SI3220/25 reference layout, keep external line and ringing-current paths compact, and avoid routing protected subscriber connections beneath digital clock, PCM, or SPI nets. The 64-TQFP device should be positioned near its line termination, protection, and decoupling components so loop area stays small.

Budget the 65 mA operating supply current and 941 mW listed device power at the actual 3.3 V or 5 V operating rail. Provide local decoupling at the supply pins using the capacitance and placement specified by the manufacturer. Account for regulator efficiency and adjacent circuit load when sizing upstream power, and avoid sharing noisy switching-regulator nodes with the analog codec section when possible.

Do not assume that every SI3220 suffix code is an automatic production substitution. Confirm the exact ordering code, temperature range, lead-free configuration, pin description, and external-network values for SI3220-G-GQ, SI3220-FQ, or SI3220-G-GQR before modifying a qualified design. Also verify the required line impedance, ringing voltage, and protection components against the target network rather than copying values from an unrelated design.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The SI3220-FQ family listing identifies the SI3220-G-FQ as lead-free. RoHS, REACH, halogen-free, and conflict-minerals declarations were not explicitly confirmed in the available product information.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SI3220-G-FQ datasheet SI3220-G-FQ datasheet pdf SI3220-G-FQ pinout SI3220-G-FQ specifications SI3220-G-FQ equivalent SI3220-G-FQ replacement SI3220-G-FQ cross reference SI3220-G-FQ vs SI3220-G-GQ SI3220-G-FQ price SI3220-G-FQ stock SI3220-G-FQ 64 TQFP Skyworks SI3220-G-FQ

רכיבים ומונחים קשורים

Skyworks Solutions Silicon Labs SI3220-G-FQ SI3220-G-GQ SI3220-FQ SI3220-G-GQR Subscriber Line Interface Concept SLIC dual-channel codec ProSLIC programmable CMOS GCI PCM interface SPI interface internal balanced ringing internal diagnostics BORSCHT 64-TQFP TQFP package family surface mount voice over IP voice gateway subscriber line access analog terminal adapter
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר