SI3220-G-FQ - Dual-Channel SLIC/Codec 64-TQFP | Skyworks
부품 번호: SI3220-G-FQ ✓ 활성SI3220-G-FQ 개요
A Subscriber Line Interface Concept, or SLIC, is the analog-facing portion of a voice terminal device. It interfaces with the telephone line, provides line-driving and sensing functions, and works alongside a codec that converts between analog voice signals and digital PCM data. The SI3220-G-FQ integrates both functions into one device, reducing board area and simplifying the connection between the line interface and the system controller.
Key features include two integrated voice channels, support for 3.3 V and 5 V operation, a typical operating supply current of 65 mA, and internal balanced ringing rated at 65 Vrms. The GCI interface supports general-purpose hardware control, while PCM and SPI interfaces provide digital links to codecs, DSPs, and system controllers. Operating temperature is specified from 0°C to 70°C, and the device is offered in a lead-free 64-TQFP package.
The SI3220-G-FQ is implemented as a programmable CMOS SLIC and codec. Its integrated ringing and diagnostics features help a system detect line conditions and reduce reliance on external test equipment. Because the device is designed for subscriber-line access, its operating characteristics and interface set must be evaluated together with the target line voltage, transformer or external termination network, digital host interface, and regional voice requirements.
Typical applications include voice-over-IP analog adapters, digital subscriber line equipment, voice gateways, analog terminal adapters, central-office line-card modules, and carrier-grade voice interfaces. The dual-channel architecture allows one package to serve two analog voice paths, provided the board satisfies the appropriate line-isolation, surge, thermal, and routing requirements.
Designers should follow the manufacturer reference circuit for line termination, ringing capacitors, clocking, digital interfaces, and decoupling. Because this is a line-facing integrated circuit, printed-circuit-board creepage, isolation components, protection networks, and analog-versus-digital partitioning can be as important as the logic interface itself. Confirm the exact pin arrangement and recommended external network against the manufacturer datasheet before layout release.
This page combines the device specifications, package information, drop-in alternatives, application guidance, and design notes needed to evaluate the SI3220-G-FQ for telecom, voice gateway, and subscriber-line designs.
드롭인 대체품: SI3220-G-FQ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SI3220-G-FQ (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Supply Voltage, Device Type, Line Functions.
SI3220-G-GQ
✅ 드롭인가격 문의
데이터시트 보기 →SI3220-FQ
✅ 드롭인가격 문의
데이터시트 보기 →SI3220-G-GQR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SI3220-G-FQ 사양
| Device Type | Dual-channel SLIC and codec interface IC |
| Number of Channels | 2 channels |
| Interfaces | GCI, PCM, and SPI |
| 공급 전압 | 3.3 V or 5 V |
| Operating Supply Current | 65 mA |
| Internal Balanced Ringing | 65 Vrms |
| Internal Diagnostics | Supported |
| Power Dissipation | 941 mW |
| 동작 온도 | 0°C to 70°C |
| 패키지 | 64-pin TQFP, 10 mm x 10 mm |
| 실장 유형 | Surface mount |
| Lead-Free Status | Lead-free |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| Packaging | Tray |
| Technology | Programmable CMOS |
| BORSCHT Functions | Supported |
| Target Line Rate | Up to 18 kft |
SI3220-G-FQ 64-pin tqfp, 10 mm x 10 mm 핀 구성 가이드
SI3220-G-FQ(64-pin tqfp, 10 mm x 10 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: SI3220-G-FQ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SI3220-G-FQ 적합 용도: 6 애플리케이션s: Voice-over-IP Analog Terminal Adapter, Dual-Channel Voice Gateway, Subscriber Line Access Equipment, Analog Terminal Adapter, Carrier Voice Interface Card, Analog Voice Fax and Data Terminal.
Voice-over-IP Analog Terminal Adapter
The SI3220-G-FQ fits a two-channel voice-over-IP terminal adapter that must connect analog subscriber lines to a digital voice processor. Its two integrated SLIC and codec channels provide a compact bridge between line-side signaling and digital PCM or SPI connectivity, while the 65 mA operating current and 3.3 V or 5 V supply operation simplify digital rail integration. Internal balanced ringing rated at 65 Vrms can reduce external line-side circuitry, but the manufacturer-recommended termination, coupling, surge protection, and isolation network remains essential. Use the PCM interface where a codec bus is available, or SPI and GCI where the host controls signaling directly. The 64-TQFP footprint requires careful separation of sensitive line routing from digital clocks.
추천
Dual-Channel Voice Gateway
A voice gateway can use the SI3220-G-FQ to provide two analog subscriber-line channels without allocating a separate SLIC and codec package to every port. The device combines programmable CMOS line-interface functions with PCM, SPI, and GCI connectivity, allowing a gateway controller to supervise call states and route narrowband voice traffic. The listed 941 mW power figure and 65 mA supply current make rail budgeting straightforward, while the 0°C to 70°C range suits commercial telecom equipment. Designers should budget PCB area for line protection and isolation and place the 64-TQFP away from noisy switching regulators and high-current line-driver stages.
추천
Subscriber Line Access Equipment
The SI3220-G-FQ is applicable to subscriber line access and digital-to-analog line-interface modules requiring two voice channels. Its integrated balanced ringing, internal diagnostics, and BORSCHT-related line functions help implement subscriber-side signaling within a compact design. Because the device is line-facing, correctness depends on the complete analog network rather than the digital interface alone. Use the manufacturer reference circuit to select the termination and ringing values, and maintain the required separation between external line connections and low-level digital signals. The 10 mm by 10 mm 64-TQFP package also supports assembly methods commonly used in telecom interface boards.
추천
Analog Terminal Adapter
In an analog terminal adapter, the SI3220-G-FQ can provide two subscriber-line voice channels with a single mixed-signal IC. The GCI, PCM, and SPI interfaces allow connection to a channel controller, DSP, or gateway processor while internal 65 Vrms balanced ringing supports line-signalling requirements. The 3.3 V or 5 V supply choice helps align the codec side with the host platform, and the lead-free 64-TQFP package supports standard surface-mount assembly. Layout must prevent line-side transients and ringing-current paths from coupling into the PCM or SPI nets, and the external protection network must be selected for the target deployment environment.
추천
Carrier Voice Interface Card
The SI3220-G-FQ is suited to a carrier voice interface card that converts two analog line channels into digital voice streams for central-office or access equipment. Its dual-channel architecture provides a direct fit when the card requires two subscriber interfaces, while internal diagnostics can support production testing and field troubleshooting. The 65 mA operating current is useful for per-channel thermal and power budgeting, and the 0°C to 70°C specification covers typical indoor telecom environments. Confirm line voltage, ring cadence, impedance, and protection requirements against the exact product deployment rather than treating the IC as a universal analog telephone front end.
추천
Analog Voice Fax and Data Terminal
Legacy terminal equipment that combines analog voice with modem signaling can use the SI3220-G-FQ where two line channels are needed. The SLIC and codec integration reduces the number of mixed-signal packages compared with a separate line interface and codec design, and the GCI interface offers host control of line-related functions. The 3.3 V or 5 V operation accommodates different terminal architectures, while the 64-TQFP package simplifies inspection and rework. Validate the external network and ringing behavior carefully because fax and modem equipment imposes legacy line-timing and impedance requirements that may not match modern voice gateways.
추천
추천 제품 요약
엔지니어링 참조 데이터: SI3220-G-FQ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SI3220-G-GQ | SI3220-FQ | SI3220-G-GQR |
|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) |
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Device Type | Dual-channel SLIC/codec | Dual-channel SLIC/codec | Dual-channel SLIC/codec | Dual-channel SLIC/codec |
주요 차별점
- Two integrated SLIC and codec channels in one package (vs SI3220-G-GQ)
- Documented internal 65 Vrms balanced ringing (vs SI3220-G-GQ)
- Mixed GCI, PCM, and SPI host connectivity (vs SI3220-FQ)
- Defined commercial operating range (vs SI3220-G-GQR)
설계 노트
Treat the line-side and codec-side sections as separate high- and low-voltage domains. Follow the SI3220/25 reference layout, keep external line and ringing-current paths compact, and avoid routing protected subscriber connections beneath digital clock, PCM, or SPI nets. The 64-TQFP device should be positioned near its line termination, protection, and decoupling components so loop area stays small.
Budget the 65 mA operating supply current and 941 mW listed device power at the actual 3.3 V or 5 V operating rail. Provide local decoupling at the supply pins using the capacitance and placement specified by the manufacturer. Account for regulator efficiency and adjacent circuit load when sizing upstream power, and avoid sharing noisy switching-regulator nodes with the analog codec section when possible.
Do not assume that every SI3220 suffix code is an automatic production substitution. Confirm the exact ordering code, temperature range, lead-free configuration, pin description, and external-network values for SI3220-G-GQ, SI3220-FQ, or SI3220-G-GQR before modifying a qualified design. Also verify the required line impedance, ringing voltage, and protection components against the target network rather than copying values from an unrelated design.
규정 준수 정보
The SI3220-FQ family listing identifies the SI3220-G-FQ as lead-free. RoHS, REACH, halogen-free, and conflict-minerals declarations were not explicitly confirmed in the available product information.