Microchip Technology

SY89808LTI - 500MHz 1:9 Differential HSTL Buffer | Microchip

MPN: SY89808LTI ✓ פעיל
3.3 V Vdss 32-pin TQFP Package 500 MHz Speed
כמות הזמנה מינימלית: 1 |

SY89808LTI סקירה

The Microchip Technology SY89808LTI is a 3.3 V, 500 MHz, 1:9 differential HSTL fanout buffer and voltage translator in a 32-pin TQFP package. The device accepts one differential input and provides nine differential outputs, giving a total fanout ratio of 1:9. Its 1.5 V HSTL interface level supports high-speed digital signaling while the 3.3 V supply architecture separates interface voltage from the internal operating voltage.

A differential fanout buffer is a clock-and-timing semiconductor that preserves a differential clock or data signal while distributing it to multiple destinations. Its role in the hierarchy is clock buffer → fanout buffer → clock and timing IC → semiconductor. HSTL is a low-swing, source-terminated signaling method commonly used for high-speed digital interconnects. Translating and buffering the signal at the distribution point helps drive multiple loads without loading the original source.

The SY89808LTI’s principal specifications are its 500 MHz operating frequency, 1:9 fanout ratio, 3.3 V supply voltage, differential input and output architecture, and 1.5 V HSTL signal level. These characteristics make the device applicable where one high-speed differential source must reach multiple downstream circuits while maintaining a consistent voltage interface. The 1:9 ratio allows a single input branch to feed nine output branches without requiring nine separate source buffers.

The differential architecture is particularly useful when signal integrity depends on matched edge timing through a multi-drop board topology. A common source can drive the buffer input, while the nine outputs provide local distribution points for receivers, controllers, memory interfaces, or downstream clock-generating circuits. Because skew and return-loss performance depend on PCB topology, trace length matching, termination, and reference-plane continuity, the implementation around the device is as important as the stated operating frequency.

Typical uses include high-speed parallel-processing systems, networking and communications equipment, test and measurement systems, data-conversion platforms, and clock distribution around FPGAs or other digital controllers. A single high-speed differential clock can be distributed to multiple parallel destinations, while the translator function supports interfacing between 1.5 V HSTL logic and circuitry operating from a 3.3 V supply.

For a new layout, place the device so that input and output differential pairs have matched impedances and controlled length. Follow the manufacturer’s pin-description and layout guidance when assigning termination and decoupling. Avoid introducing long stubs between the outputs and their receivers because stubs can create reflections that reduce the usable bandwidth below the 500 MHz device capability.

This product page consolidates the verified SY89808LTI function, package, interface, and sourcing information with practical clock-distribution guidance. It also identifies where detailed electrical, pin-level, environmental, and lifecycle information must be confirmed in the manufacturer datasheet before a production design is released.

חלופות תחליף ישיר עבור SY89808LTI — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

SY89808LTG

✅ Drop-In
Microchip Technology
📦 TQFP-32
Clock fanout buffer and translator · 2 inputs · 9 differential output pairs · 2:9 · 500 MHz · 3.3 V · 1.8 V · Differential HSTL

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

SY89808LTI מפרטים

Product Type Differential HSTL fanout buffer/translator
מתח אספקה 3.3 V
Maximum Operating Frequency 500 MHz
Fanout Ratio 1:9
Signal Interface Differential HSTL
HSTL Signal Voltage 1.5 V
מספר יציאות 9 differential outputs
Input Configuration 1 differential input
Logic Family HSTL
מארז 32-pin TQFP
סוג הרכבה Surface mount

מדריך תצורת פינים של SY89808LTI 32-pin tqfp

תצורת פינים עבור SY89808LTI (מארזת 32-pin tqfp). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 32-pin tqfp עבור SY89808LTI

אין נתוני פריסת פינים מפורטים עבור SY89808LTI.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SY89808LTI מתאים עבור 6 יישוםs: High-Speed Clock Distribution, FPGA Parallel-Interface Support, Communications Equipment, Parallel Data Distribution, Test and Measurement Systems, Data-Conversion Platforms.

🖥️

High-Speed Clock Distribution

The SY89808LTI fits a single-source, nine-destination clock tree because its 1:9 differential HSTL fanout ratio can distribute one clock to nine branches at up to 500 MHz. Place the source at the input and route each differential output as a controlled-impedance pair to its assigned receiver. The 3.3 V supply and 1.5 V HSTL interface support low-swing distribution, while matched trace geometry and source termination help limit timing degradation.

🖥️

FPGA Parallel-Interface Support

The SY89808LTI can distribute a 500 MHz differential clock across nine parallel FPGA or controller domains. Its one-input, nine-output differential arrangement avoids combining multiple long loads directly at the clock source and gives each branch a defined fanout point. The HSTL interface operates at 1.5 V from a 3.3 V supply. Board implementation should preserve pair symmetry, provide continuous reference planes, and avoid stubs that could reflect clock energy.

🌐

Communications Equipment

The SY89808LTI is applicable in communications equipment that requires a high-speed differential source to reach multiple timing domains. Its 500 MHz capability and 1:9 fanout ratio suit central clock distribution in line cards, interface modules, and backplane-related logic. The 3.3 V-powered, 1.5 V HSTL interface provides a defined signaling method, while proper source termination and impedance-controlled routing are essential to preserve edge quality across the board.

🔧

Parallel Data Distribution

The SY89808LTI can translate and fan out a differential HSTL signal when multiple high-speed data paths require synchronized distribution. Its 1:9 architecture gives designers a practical way to separate nine destinations from one source, while the 500 MHz rating addresses demanding parallel interfaces. Because timing margin depends on skew and edge degradation, route each output as a matched pair and verify the complete channel against receiver thresholds and termination requirements.

📡

Test and Measurement Systems

The SY89808LTI is suited to clock distribution in test and measurement equipment where a common differential stimulus must reach multiple acquisition, capture, or processing paths. The 1:9 fanout ratio supports branched clock trees at up to 500 MHz, and the translator function provides a 1.5 V HSTL interface from a 3.3 V supply. Layout should minimize branch length differences and connector-related discontinuities so channel-to-channel timing remains predictable.

📺

Data-Conversion Platforms

The SY89808LTI can provide a common differential clock to multiple converters and digital processing blocks in a high-speed data-acquisition platform. Its nine differential outputs simplify fanout architecture, while the 3.3 V supply and 1.5 V HSTL level suit systems with compact high-speed interfaces. The device should be positioned centrally enough to limit trace lengths, and each pair requires matched geometry, suitable return paths, and termination selected from the manufacturer’s reference design.

What is the SY89808LTI?
The SY89808LTI is a 3.3 V differential HSTL fanout buffer and voltage translator operating up to 500 MHz. It converts one differential input into nine differential HSTL outputs, providing a 1:9 fanout ratio. The device is housed in a 32-pin TQFP package and is intended for high-speed clock or data distribution where multiple destinations require a low-swing 1.5 V differential interface.
What is the operating frequency of SY89808LTI?
The SY89808LTI supports operation up to 500 MHz. According to the manufacturer datasheet, its defining performance is a 1:9 differential HSTL fanout function implemented from a 3.3 V supply. Practical signal integrity at that frequency depends on controlled-impedance routing, correct source termination, matched differential trace geometry, and minimizing output stubs.
What is the fanout ratio of SY89808LTI?
The SY89808LTI has a 1:9 differential fanout ratio. One differential input feeds nine differential outputs, allowing a single high-speed source to serve nine downstream branches. This is a useful ratio for clock trees, parallel data paths, communications equipment, and digital test systems where a central source must be distributed without tying several long board traces directly together.
What voltage levels does SY89808LTI support?
The SY89808LTI operates from a 3.3 V supply and uses a 1.5 V HSTL signal level for its differential interface. The device combines clock fanout and voltage-translation functions so that a 1.5 V differential signal can be distributed to multiple receivers through a defined low-swing interface. Exact input thresholds, output levels, and supply-current limits should be taken from the manufacturer’s electrical-characteristics table.
Where can I download the SY89808LTI datasheet PDF?
The SY89808LTI datasheet is available from the Micrel datasheet listing at the product page identified on this record, while the manufacturer product page and the Microchip cross-reference search provide additional technical resources. The datasheet is the controlling document for pin assignments, recommended termination, decoupling, propagation delay, output skew, absolute maximum ratings, and environmental limits.
Where can I find the SY89808LTI pinout?
The SY89808LTI pinout is found in the pin-description and package-drawing sections of the manufacturer datasheet for the 32-pin TQFP package. Use that table to identify the differential input, nine differential outputs, supply pins, and ground pins before PCB routing. Pin assignments should not be inferred from package position alone because the exact ground and supply connectivity is essential for high-speed HSTL operation.
What can replace the SY89808LTI?
The closest documented drop-in replacement is the Microchip Technology SY89808LTG, which is identified in the cross-reference material as using a consistent 32-pin TQFP footprint and matching the SY89808LTI’s 2:9-versus-1:9 description context. The available records do not establish five electrically equivalent drop-in parts, so additional alternatives should not be selected solely from similar titles or package names.
Is SY89808LTG the same as SY89808LTI?
The SY89808LTG is the closest same-family alternative listed for the SY89808LTI, with a matching 32-pin TQFP package and comparable 500 MHz HSTL buffer functionality. The distinguishing suffix likely reflects a device-grade or ordering option, but the exact temperature and qualification differences must be checked in the manufacturer data before substitution. Confirm pinout, supply limits, timing, and production-grade requirements.
When should I choose SY89808LTI over SY89808LTG?
Choose the SY89808LTI when its exact ordering suffix and temperature grade match the production requirement and the same-family SY89808LTG does not. Both are associated with a 500 MHz differential HSTL buffer concept in a 32-pin TQFP footprint, so the deciding factors are documented grade, lifecycle, qualification, and ordering differences rather than a change in fanout architecture. Review the manufacturer cross-reference result before finalizing the substitution.
Is SY89808LTI suitable for a 500 MHz clock tree?
The SY89808LTI is suitable for a 500 MHz differential clock-distribution role when the board meets the required impedance, termination, return-path, and timing conditions. Its 1:9 ratio allows one source to feed nine destinations. The device rating alone does not guarantee system-level timing performance; output-to-output skew, additive jitter, trace length mismatch, and receiver loading must also be evaluated.
Does SY89808LTI require external HSTL termination?
The SY89808LTI is a differential HSTL buffer, so termination and output impedance must be implemented according to the manufacturer’s recommended circuit. HSTL interfaces commonly use source termination, but the exact resistor values and connection locations depend on the source, receiver, trace impedance, and topology. Use the reference circuit and PCB-layout guidance in the manufacturer datasheet rather than copying termination values from a different clock-buffer family.
Where can I buy SY89808LTI and check its price?
Use the Request a Quote form on this page to request the current SY89808LTI quotation, stock position, minimum order quantity, and lead time. Commercial terms can change independently of technical documentation, so the form is the appropriate place to obtain a current commitment for the exact 32-pin TQFP ordering code rather than relying on a stale product-page amount.
What is the lead time for SY89808LTI?
The current lead time for SY89808LTI should be requested through the Request a Quote form on this page. Lead time depends on the manufacturer’s inventory, date code, package configuration, order quantity, and supply status at the time of quotation. Use the quoted delivery information for production planning rather than inferring availability from a distributor category or comparison-tool page.
Is SY89808LTI in stock?
Current inventory for the exact SY89808LTI ordering code should be confirmed through the Request a Quote form on this page. The device is actively listed, but a live product-category result does not guarantee allocation for a specific package suffix or quantity. State the required quantity, date-code preference, and target delivery location when requesting the supply commitment.
What are the key specifications engineers should know about SY89808LTI?
The key SY89808LTI specifications are a 3.3 V supply, operation up to 500 MHz, one differential input, nine differential HSTL outputs, a 1:9 fanout ratio, a 1.5 V HSTL signal level, and a 32-pin TQFP package. These values define the device as a high-speed differential clock or data fanout stage. Timing, skew, current, temperature, and absolute maximum ratings require confirmation from the manufacturer datasheet.
What are the best applications for SY89808LTI?
The SY89808LTI is best suited to high-speed clock distribution, parallel digital interfaces, communications equipment, test systems, and FPGA or controller clock trees. Its 1:9 ratio serves nine branches from one source, while the differential HSTL interface supports point-to-point, source-terminated links. Choose it when nine destinations require a common timing source and the PCB can maintain controlled-impedance, matched, stub-free routing.

נתוני עזר הנדסיים עבור SY89808LTI — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SY89808LTI when the design requires one differential HSTL source to feed nine destinations at up to 500 MHz from a 3.3 V supply, particularly in parallel clock trees, communications equipment, test systems, and high-speed data-conversion platforms. Choose the SY89808LTG when the manufacturer cross-reference confirms that its exact temperature grade, qualification, lifecycle, and ordering conditions better match the production design while retaining the compatible TQFP-32 footprint. Neither part should be selected solely by the LTG or LTI suffix. Before substitution, compare the manufacturer’s pin-description tables, absolute maximum ratings, propagation delay, output skew, supply current, operating-temperature range, and recommended termination. The documented records do not establish five distinct drop-in equivalents, so production sourcing should use the Request a Quote form for the exact ordering code rather than accept a lower-information packaging or reel-code variant.

השוואה עם חלופות

פרמטר מוצר זה SY89808LTG
Brand Microchip Technology Microchip Technology
Package 32-pin TQFP 32-pin TQFP
Product Type Differential HSTL fanout buffer/translator Differential HSTL fanout buffer/translator
Operating Frequency 500 MHz 500 MHz
Signal Interface Differential HSTL Differential HSTL

מבדילים עיקריים

  • One-to-nine differential fanout in a single device (לעומתSY89808LTG)
  • Integrated HSTL translation and clock distribution (לעומתSY89808LTG)
  • High-speed differential distribution (לעומתSY89808LTG)

הערות תכנון

Route every differential pair with matched geometry, continuous reference planes, and the impedance specified by the manufacturer’s interface guidance. Keep the input pair and each output pair as short as practical, maintain consistent spacing between pair members, and avoid vias that unnecessarily disrupt return paths. At the 500 MHz capability of the SY89808LTI, trace discontinuities and reference-plane changes can degrade edge quality even when the nominal clock frequency is correct.

Use the manufacturer’s recommended HSTL source-termination and output configuration instead of applying generic low-voltage termination by analogy. Termination values depend on trace impedance, receiver topology, source resistance, and whether outputs are lightly loaded. Keep output stubs exceptionally short because a capacitive stub can act as a discontinuity and reflect energy back into the buffer, reducing rise time and potentially causing double-edge or ringing behavior.

Do not treat the 1:9 fanout rating as permission to create nine arbitrary long branches. Match branch topology where channel-to-channel timing matters, preserve differential symmetry, and verify source, output, and receiver loading in simulation. The SY89808LTI is a clock-and-timing distribution device, not a general-purpose logic buffer, and its HSTL interface requires deliberate termination and routing.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance attributes are not stated in the available product and distributor records. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status using the manufacturer’s current product documentation or declarations.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SY89808LTI datasheet SY89808LTI pinout SY89808LTI datasheet pdf SY89808LTI 500MHz SY89808LTI TQFP-32 SY89808LTI equivalent SY89808LTI replacement SY89808LTI cross reference SY89808LTI vs SY89808LTG SY89808LTI clock buffer SY89808LTI HSTL fanout SY89808LTI price Microchip SY89808LTI

רכיבים ומונחים קשורים

Microchip Technology SY89808LTI SY89808LTG clock fanout buffer clock buffer clock and timing IC semiconductor differential HSTL HSTL voltage translator 500 MHz 1:9 fanout ratio 3.3 V supply 1.5 V HSTL 32-pin TQFP TQFP package family surface-mount package source termination controlled impedance differential pair output-to-output skew FPGA clock distribution test and measurement equipment communications equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר