Texas Instruments

TLV2765IN - Quad 3.6V 500kHz RRIO Op Amp | Texas Instruments

MPN: TLV2765IN ✓ פעיל
1.8 V Vdss 20 uA Id 14-pin rectangular DIP Package
כמות הזמנה מינימלית: 1 |

TLV2765IN סקירה

The Texas Instruments TLV2765IN is a quad, low-power, rail-to-rail input/output operational amplifier operating from a 1.8V minimum supply up to the 3.6V maximum recommended supply. It provides 500kHz gain-bandwidth product, approximately 20uA supply current per channel, and a shutdown function that reduces shutdown current to 10nA per channel. The device is supplied in a 14-pin through-hole DIP package.

An operational amplifier is a voltage-gain building block used to amplify, buffer, filter, compare, and control analog signals. The TLV2765 belongs to the operational-amplifier hierarchy, where rail-to-rail input and output operation helps the amplifier process signals near the positive and negative supply rails. The TLV2765 family combines this signal-handling capability with low quiescent current and shutdown control for portable and low-power systems.

Key features include four amplifier channels, CMOS-compatible rail-to-rail inputs, rail-to-rail outputs, a 500kHz gain-bandwidth product, and operation from 1.8V to 3.6V. The approximately 20uA per-channel supply current supports battery-powered equipment where every microampere affects useful runtime. A common shutdown pin can disable all four channels, while the 10nA per-channel shutdown current limits backup and standby consumption.

The wide common-mode input range makes the TLV2765 useful when signals approach either supply rail. Its 500kHz bandwidth supports low-frequency signal conditioning, sensor interfaces, filtering, and general instrumentation rather than high-speed video or RF amplification. The 3.6V maximum recommended supply also permits operation from two AA or AAA cells, although designers should account for cell-voltage variation and confirm the required headroom.

Typical applications include portable measurement systems, low-voltage sensor interfaces, battery-powered instrumentation, analog signal conditioning, and industrial control modules. Shutdown is particularly useful when a system must periodically enter a low-power state without completely losing its supply. In multi-amplifier designs, the common shutdown control can simplify state management across all four channels.

Designers should verify output current, output swing, input bias behavior, and stability against the specific load and signal amplitude. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased to a defined common-mode voltage to prevent unstable operation.

This page combines the manufacturer device information, package characteristics, application guidance, parameter comparisons, and practical design notes to support component selection and PCB implementation for the TLV2765IN quad rail-to-rail operational amplifier.

חלופות תחליף ישיר עבור TLV2765IN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

TLV2765IP

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 DIP-14
Same 14-pin DIP footprint and core 1.8V-to-3.6V, 500kHz amplifier function; industrial temperature-grade designation differs by order code, requiring temperature-range confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

TLV2765IN דירוגים מרביים ומאפיינים חשמליים

Number of Channels 4 circuits
Minimum Supply Voltage 1.8 V
Maximum Recommended Supply Voltage 3.6 V
Gain-Bandwidth Product 500 kHz
Quiescent Current per Channel 20 uA
Shutdown Current per Channel 10 nA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Control Common shutdown function
Temperature Grade Industrial
Terminal Form Through-hole
Number of Terminals 14 terminals
מארז 14-pin rectangular DIP
Technology CMOS
Amplifier Type Single supply, rail-to-rail input/output operational amplifier

מדריך תצורת פינים של TLV2765IN 14-pin rectangular dip

תצורת פינים עבור TLV2765IN (מארזת 14-pin rectangular dip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 14-pin rectangular dip עבור TLV2765IN

אין נתוני פריסת פינים מפורטים עבור TLV2765IN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TLV2765IN מתאים עבור 6 יישוםs: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Industrial Process Measurement, Low-Voltage Active Filtering, Precision Voltage Buffering, Standby and Monitoring Circuitry.

🧩

Portable Sensor Signal Conditioning

The TLV2765IN fits low-voltage sensor interfaces where four channels must operate from a 1.8V supply with limited battery capacity. Its approximately 20uA per-channel current and rail-to-rail input behavior help preserve signal range in compact systems. Place the amplifier close to the sensor and conditioning network, then validate the sensor output against the amplifier input range. Shutdown can reduce standby demand to 10nA per channel when the sensing subsystem is not being sampled.

🔧

Battery-Powered Instrumentation

The TLV2765IN is useful in handheld or field instrumentation operating from two AA or AAA cells. The 1.8V minimum supply, 500kHz gain-bandwidth product, and approximately 20uA per-channel consumption support analog measurement channels without requiring a high-voltage supply. The common shutdown control allows the instrument to enter a low-power state between readings. Confirm cell-regulation limits, sensor excitation requirements, and the complete analog signal path before finalizing the power architecture.

🏭

Industrial Process Measurement

The TLV2765IN supports four-channel analog conditioning in industrial process-measurement equipment when the signal and supply levels fall within its low-voltage range. Rail-to-rail inputs can accommodate sensor outputs near the supply rails, while 500kHz bandwidth is sufficient for many slow process signals and filters. The industrial temperature-grade ordering option suits extended ambient environments. Validation should include input common-mode behavior, output swing, noise, settling time, and isolation from adjacent switching circuitry.

⚡

Low-Voltage Active Filtering

The TLV2765IN can implement active low-pass, high-pass, and filtering stages in low-voltage measurement systems. Its 500kHz gain-bandwidth product provides useful closed-loop bandwidth for sensor noise reduction and signal conditioning at moderate frequencies. Four channels reduce component count when several filter sections are required. Keep input and feedback networks close to the relevant amplifier pins, check capacitor types for the intended signal bandwidth, and use the manufacturer stability guidance when driving capacitive loads.

📺

Precision Voltage Buffering

The TLV2765IN can buffer low-voltage sensor and divider outputs where rail-to-rail operation helps preserve signal amplitude. A voltage follower configuration uses the amplifier's high open-loop gain to reduce output loading while maintaining a 1.8V-to-3.6V operating range. The approximately 20uA per-channel supply current is useful in power-constrained designs. Verify offset, input bias current, output-current capability, and settling behavior against the source impedance and required settling time.

🖥️

Standby and Monitoring Circuitry

The TLV2765IN fits systems that need active analog monitoring during normal operation and very low standby consumption afterward. A common shutdown pin controls all four channels, and shutdown current is approximately 10nA per channel according to the Texas Instruments family documentation. This makes the amplifier useful in periodically sampled sensing systems, threshold monitors, and low-duty-cycle test equipment. Validate shutdown polarity and startup behavior in the system state machine rather than assuming the amplifier is immediately ready after shutdown release.

סיכום מוצרים מומלצים

TLV2765IP Same-family 14-pin DIP operational amplifier option בשימוש ב-: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Industrial Process Measurement, Low-Voltage Active Filtering, Precision Voltage Buffering, Standby and Monitoring Circuitry TLV2762 Related low-power single-supply amplifier family member בשימוש ב-: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Low-Voltage Active Filtering, Standby and Monitoring Circuitry TLV2765IPW Surface-mount member of the TLV2765 family בשימוש ב-: Industrial Process Measurement, Precision Voltage Buffering
What is the operating voltage of TLV2765IN?
The TLV2765IN operates from a 1.8V minimum supply to a 3.6V maximum recommended supply. According to the Texas Instruments TLV2765 family datasheet, the device is characterized at 1.8V and 2.4V, allowing operation from two AA or AAA cells where the usable cell voltage permits. Designers should keep the supply below the 3.6V maximum recommended operating voltage and retain suitable input and output headroom for the required signal range.
What are the key specifications of TLV2765IN that engineers should know?
The TLV2765IN is a four-channel, 1.8V-to-3.6V rail-to-rail input/output operational amplifier with a 500kHz gain-bandwidth product. According to the Texas Instruments TLV2765 product page, it draws approximately 20uA per channel in normal operation and supports shutdown at 10nA per channel. The 14-pin through-hole DIP package, common shutdown function, and low-voltage operation make it suitable for portable instrumentation and battery-powered analog signal-conditioning circuits.
Where can I download the TLV2765IN datasheet PDF?
The TLV2765IN datasheet can be downloaded from the Texas Instruments TLV2765 family document at https://www.ti.com/lit/ds/symlink/tlv2762.pdf. According to Texas Instruments, the document covers the TLV2760 through TLV2765 family of 1.8V micropower rail-to-rail input/output operational amplifiers. Use the ordering-information and pin-configuration sections to confirm the relationship between the TLV2765 function, shutdown control, and the 14-pin DIP package used by TLV2765IN.
Where can I find the TLV2765IN pinout?
The authoritative TLV2765IN pin configuration is shown in the pin-configuration table of the Texas Instruments TLV2765 family datasheet. The TLV2765IN uses a 14-terminal through-hole DIP package, with each channel providing its own input and output connections and a common shutdown connection. Before assigning PCB tracks, verify every signal against that pin table, including the orientation of pin 1 and the functional relationship between the shutdown terminal and supply rails.
Does TLV2765IN support rail-to-rail input and output?
Yes. The TLV2765IN supports rail-to-rail input and output operation, allowing it to process signals close to the supply limits. According to the Texas Instruments TLV2765 family description, it is a CMOS quad amplifier designed for 1.8V operation with a 500kHz gain-bandwidth product. Rail-to-rail behavior improves signal utilization in low-voltage systems, although the designer must still check output swing and output-current requirements for the selected load.
How much current does TLV2765IN consume?
The TLV2765IN consumes approximately 20uA per channel during normal operation, and shutdown reduces the current to 10nA per channel. According to the Texas Instruments TLV2765 family documentation, the four-channel device therefore provides low quiescent demand for portable and standby applications. Actual system consumption also includes input bias current, load current, external circuitry, and leakage, so battery-life calculations should include those additional contributions.
What can replace the TLV2765IN?
The TLV2765IP is the closest same-package replacement for a design using the 14-pin DIP TLV2765IN. It retains the quad, 3.6V, 500kHz rail-to-rail amplifier architecture and common shutdown arrangement, but its temperature-grade suffix differs from the industrial-grade TLV2765IN. Confirm the full pin list, temperature range, supply limits, and shutdown polarity in the manufacturer documentation before substituting it into equipment with extended thermal requirements.
Is TLV2765IPW the same as TLV2765IN?
No. The TLV2765IPW and TLV2765IN belong to the same Texas Instruments TLV2765 family and share the core amplifier function, but they use different packages. The TLV2765IN is a 14-terminal through-hole DIP, while the TLV2765IPW is a surface-mount package. According to the Texas Instruments ordering information, package interchange is not drop-in because the land patterns and pin arrangement differ; choose one based on PCB construction rather than treating the suffixes as equivalent.
TLV2765IN vs TLV2765IP - which is better for a new design?
Choose TLV2765IN for a new through-hole design requiring the industrial temperature grade, and choose TLV2765IP when that temperature-grade distinction is acceptable while retaining the 14-pin DIP format. The Texas Instruments TLV2765 family documentation identifies both as members of the same low-voltage, 500kHz amplifier family. PCB compatibility is the primary advantage of the DIP options, but engineers must still verify temperature qualification and all ordering details before release.
When should I choose TLV2765IN over a surface-mount operational amplifier?
Choose TLV2765IN when a new board uses through-hole construction, repairability is important, or the assembly process favors a 14-pin DIP package. According to the Texas Instruments TLV2765 ordering information, the device combines an industrial temperature grade with approximately 20uA per-channel operation and a 500kHz gain-bandwidth product. A surface-mount option may be preferable when board area, automated assembly, or reflow capability dominates the mechanical requirements.
Is TLV2765IN suitable for battery-powered sensor interfaces?
The TLV2765IN is suitable for many battery-powered sensor interfaces because it operates from 1.8V, consumes approximately 20uA per channel, and offers 10nA per-channel shutdown current. According to the Texas Instruments TLV2765 family datasheet, its rail-to-rail inputs help use a larger portion of the available supply voltage. Check the sensor output range, amplifier input bias requirements, noise performance, and leakage before selecting passive and biasing components.
Where to buy TLV2765IN online?
Use the Request a Quote form on this page to request TLV2765IN availability, unit pricing, and lead time from XAIPART. The exact orderable part is the Texas Instruments TLV2765IN in its industrial-grade 14-pin DIP configuration. Because availability and component condition can change, confirm the manufacturer part number, package, quantity, and any date-code requirements in the quote response before authorizing procurement or release to manufacturing.
What is the price of TLV2765IN?
The current TLV2765IN unit price can be requested through the Request a Quote form on this page. The quote can reflect the required quantity, package, component condition, and procurement quantity breaks without embedding a potentially stale price in technical content. For accurate purchasing, specify the complete Texas Instruments MPN TLV2765IN and state whether factory-sealed, date-code-controlled, or another condition is required for the receiving inspection process.
What is the lead time and stock status for TLV2765IN?
Current TLV2765IN stock status and lead time should be confirmed through the Request a Quote form on this page. The request should identify the quantity, the Texas Instruments TLV2765IN MPN, and any required traceability or date-code constraints. The manufacturer product page identifies the TLV2765 family as an active offering, but procurement timing can still vary by volume and inventory conditions, so obtain a current written quote before committing the schedule.
What lifecycle and compliance information applies to TLV2765IN?
The Texas Instruments product page identifies the TLV2765 family as an active offering, while the TLV2765IN ordering information identifies an industrial temperature-grade 14-pin DIP device. According to the manufacturer ordering information, the amplifier is categorized as a general-purpose rail-to-rail operational amplifier. Detailed RoHS, REACH, AEC-Q100, lead-free, and halogen-free classifications should be confirmed on the current manufacturer compliance documentation for the purchased lot and package.

נתוני עזר הנדסיים עבור TLV2765IN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the TLV2765IN for a new 14-pin DIP design that requires four rail-to-rail amplifier channels, operation from 1.8V to 3.6V, approximately 20uA per-channel operation, and an industrial temperature-grade ordering option. Its 500kHz bandwidth suits sensor buffering, low-voltage filtering, process measurement, and portable instrumentation rather than high-speed signal chains. TLV2765IP is the closest same-package option when the core amplifier and through-hole footprint are required, but its temperature-grade designation must be checked before using it in extended-temperature equipment. TLV2765IPW shares the amplifier function but requires a different surface-mount PCB footprint, so it is suitable only for a new board designed around that package. The common shutdown control is valuable in low-duty-cycle systems, while designs that require continuous operation can omit shutdown-specific sequencing. Before final selection, verify the complete pin configuration, output swing, input bias requirements, noise, stability, and lifecycle details against the manufacturer documentation.

השוואה עם חלופות

פרמטר מוצר זה TLV2765IP
Package DIP-14 DIP-14 - same
Brand Texas Instruments Texas Instruments
Number of Channels 4 circuits 4 circuits
Supply Voltage Range 1.8V to 3.6V 1.8V to 3.6V
Gain-Bandwidth Product 500kHz 500kHz
Quiescent Current per Channel 20uA 20uA
Shutdown Current per Channel 10nA 10nA
Input Common-Mode Range Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail
Shutdown Control Common shutdown function Common shutdown function

מבדילים עיקריים

  • Combines four channels with a common shutdown control (לעומתTLV2765IP)
  • Low-voltage operation with rail-to-rail signal handling (לעומתTLV2765IP)
  • Through-hole package supports repairable and conventionally assembled boards (לעומתTLV2765IPW)

הערות תכנון

Place the supply bypass capacitor and any additional decoupling directly between the supply pins and ground, with the shortest practical return path. Keep amplifier inputs, feedback components, and grounding close to the relevant channel to minimize noise pickup. Because the TLV2765IN is a through-hole DIP, preserve adequate spacing around the package for insertion, soldering, and inspection while keeping sensitive analog traces away from switching-node and high-current return paths.

Do not exceed the 3.6V maximum recommended supply voltage. The approximately 20uA per-channel operating current is suitable for low-power operation, but total supply demand also includes load current, input bias current, and external circuitry. Use the shutdown function for systems that spend significant time inactive, verify its polarity, and account for the time required for the amplifier to become signal-valid after shutdown is released.

Do not leave an unused amplifier input floating. Bias unused non-inverting inputs to a stable common-mode voltage within the input range, or use the manufacturer's recommended unused-channel configuration. Also verify that the intended output voltage remains inside the usable output swing; rail-to-rail inputs do not guarantee ideal rail-to-rail output behavior under every load, output-current, and temperature condition.

The 500kHz gain-bandwidth product makes the TLV2765IN appropriate for low-frequency sensor conditioning, buffering, and moderate-bandwidth filtering rather than high-speed waveform work. Select closed-loop gain and feedback components with the amplifier's frequency and stability characteristics in mind. If driving a capacitive load, add the isolation resistance specified in the manufacturer guidance and verify settling at the required signal bandwidth.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The component is an industrial-temperature-grade operational amplifier; detailed environmental and substance-compliance classifications were not stated on the manufacturer product-page excerpts. AEC-Q100 is marked not applicable because this ordering option is not identified as an automotive-qualified variant.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

TLV2765IN datasheet TLV2765IN pinout TLV2765IN datasheet pdf TLV2765IN equivalent TLV2765IN replacement TLV2765IN vs TLV2765IP TLV2765IN vs TLV2765IPW TLV2765IN DIP-14 op amp TLV2765IN application circuit Texas Instruments TLV2765IN TLV2765IN price TLV2765IN stock

רכיבים ומונחים קשורים

Texas Instruments TLV2765IN TLV2765IP TLV2765IPW TLV2765 TLV2762 operational amplifier quad operational amplifier rail-to-rail input rail-to-rail output low-dropout power management CMOS analog IC DIP-14 14-pin through-hole package surface mount 1.8V supply 3.6V maximum supply 500kHz gain-bandwidth product 20uA per-channel supply current 10nA per-channel shutdown current industrial temperature grade battery-powered instrumentation sensor signal conditioning active filter shutdown control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר