Microchip Technology

VSC8502RD-VR - Gigabit Ethernet PHY | Microchip

MPN: VSC8502RD-VR ✓ פעיל
כמות הזמנה מינימלית: 1 |

VSC8502RD-VR סקירה

The Microchip Technology VSC8502RD-VR is a space-constrained Gigabit Ethernet physical-layer transceiver designed for 10/100/1000BASE-T applications. The device family supports integrated line-side termination to conserve board space, reduce electromagnetic interference, and improve system performance. The VSC8502RD-VR ordering code identifies a member of the VSC8502 Ethernet PHY family.

A Gigabit Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts between digital data supplied by a media-access controller and analog signals carried over twisted-pair cabling. The VSC8502 supports 10, 100, and 1000 Mb/s operation, allowing one physical-layer device to serve multiple Ethernet speed requirements. This PHY belongs to the interface-IC and network-interface hierarchy used in routers, switches, industrial controllers, and embedded equipment.

Integrated line-side termination is a central feature of the VSC8502 family. Placing the termination network within the device can reduce the number of external passive components required around the magnetic interface. The manufacturer describes this integration as helping conserve board space, lower EMI, and improve system performance. Exact operating limits, electrical thresholds, temperature ratings, and pin assignments must be confirmed in the manufacturer documentation before schematic release.

The VSC8502 family is intended for compact 10/100/1000BASE-T equipment where PCB area and external-component count are important. Its multi-rate capability makes it applicable to industrial Ethernet interfaces, communication equipment, embedded control systems, and managed network products. The integrated termination feature can also simplify board layout in applications requiring repeatable magnetics-interface implementation across multiple ports.

Typical implementations place the PHY beside an Ethernet transformer and connect it to a network processor, switch fabric, or other digital controller through an appropriate digital interface. The physical implementation should preserve controlled differential routing, adequate return paths, and a properly designed termination network. Because exact pin names, supply voltage, clock requirements, and interface modes are not stated on the manufacturer product page excerpt, designers should use the complete VSC8502 datasheet and package drawing for implementation decisions.

Design planning should begin with the required Ethernet speed, magnetics selection, digital-controller interface, board stack-up, and environmental target. Check the package pin count, exposed-pad requirements, decoupling recommendations, and layout guidance in the manufacturer documentation. This overview supports initial architecture selection, while the complete datasheet remains the controlling source for production release.

This product page combines manufacturer application information with practical Ethernet-interface guidance, replacement considerations, and design notes. It is intended to accelerate component selection for 10/100/1000BASE-T designs while directing engineers to the authoritative datasheet for pin-level and production details.

חלופות תחליף ישיר עבור VSC8502RD-VR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם VSC8502RD-VR (אותו גורם צורה וטביעת רגל) — שונים ב Primary Application.

Microchip Technology
Primary Application: 10/100/1000BASE-T Ethernet
השווה עם VSC8502RD-VR →

VSC8502RD

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 [DATA_NEEDED: exact package and pin count]
Ethernet copper PHY · 2 ports · 10/100/1000BASE-T · GMII/RGMII · Yes · 10/100/1000BASE-T Ethernet · Space-constrained Ethernet equipment · Microchip Technology

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

VSC8502EV

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 [DATA_NEEDED: exact package and pin count]
Same VSC8502 family and stated 10/100/1000 Mb/s support; ordering-code-specific package or grade differences require confirmation

📋 חלופה להתייחסות (לא בקטלוג)

VSC8502XML

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 [DATA_NEEDED: exact package and pin count]
2 (dual-port) · 10/100/1000 Mbps (10/100/1000BASE-T) · (G/RG)MII · Copper (twisted pair) · Integrated · 135-QFN (12x12 mm) · Surface Mount · Telecom IC - Ethernet PHY

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

VSC8502RD-VR מפרטים

Ethernet Data Rates 10/100/1000 Mb/s
Supported Physical Layer 10/100/1000BASE-T
Device Type Ethernet physical-layer transceiver
Integrated Line-Side Termination Yes
Primary Application Space-constrained Gigabit Ethernet equipment
Termination Benefit Conserves board space and lowers EMI
Maximum Data Rate 1000 Mb/s
RoHS Compliance unknown
REACH Compliance unknown
סטטוס מחזור חיים Active

מדריך תצורת פינים של VSC8502RD-VR standard

תצורת פינים עבור VSC8502RD-VR (מארזת standard). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת standard עבור VSC8502RD-VR

אין נתוני פריסת פינים מפורטים עבור VSC8502RD-VR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

VSC8502RD-VR מתאים עבור 6 יישוםs: Compact Gigabit Ethernet Routers, Industrial Ethernet Controllers, Managed Network Switch Ports, Embedded Communication Gateways, Networked Test and Measurement Equipment, IoT Gateways and Edge Nodes.

🌐

Compact Gigabit Ethernet Routers

The VSC8502RD-VR fits compact routers that need one copper Ethernet physical layer supporting 10, 100, and 1000 Mb/s. The integrated line-side termination can reduce the passive-component count around the line interface, which is valuable when several ports share limited board area. Place the PHY according to the manufacturer's reference layout and pair each differential channel with the specified Ethernet magnetics. Its three supported rates also allow a common design to cover management, uplink, and legacy-speed ports, although the exact digital host interface and auto-negotiation behavior must be confirmed before routing signals in the host controller.

🏭

Industrial Ethernet Controllers

The VSC8502RD-VR is appropriate for industrial control equipment requiring 10/100/1000BASE-T connectivity within a constrained enclosure. Supporting 10, 100, and 1000 Mb/s permits the same physical layer to support supervisory links and high-bandwidth data paths. Integrated line-side termination helps simplify the magnetics-interface area and can lower EMI while saving board space. Before selecting it for an industrial product, verify the exact temperature range, isolation strategy, emissions expectations, and hardware interfaces in the complete manufacturer documentation.

🖥️

Managed Network Switch Ports

The VSC8502RD-VR can support 10/100/1000 Mb/s copper ports in space-conscious managed switching equipment. Its integrated line-side termination is useful when board area around each magnetics interface is tightly constrained and can assist with EMI control. The PHY should be paired with manufacturer-recommended Ethernet transformers and laid out with controlled impedance for both 100 Mb/s and 1000 Mb/s operation. Exact parallel-interface behavior, reference clocks, and data-sheet timing must be reviewed before connecting the device to the switching fabric.

📡

Embedded Communication Gateways

The VSC8502RD-VR is suitable for embedded gateways that bridge local control electronics with an Ethernet network. Its 10, 100, and 1000 Mb/s capability allows designers to support multiple link speeds with a common physical layer, while integrated line-side termination reduces the component burden around the transformer interface. This is useful where enclosure space and EMC performance are both important. Confirm the host interface, supply requirements, operating-temperature limits, and package footprint against the exact datasheet before committing the board layout.

🔧

Networked Test and Measurement Equipment

The VSC8502RD-VR can provide a compact Ethernet connection for test and measurement instruments requiring 10/100/1000BASE-T access. Multi-rate support allows the product to accommodate laboratory computers and management networks operating at different speeds. The integrated line-side termination reduces board-space and EMI pressure around the line interface, which is beneficial in portable or densely packaged instruments. Validation should include checking the recommended magnetics, isolation requirements, copper impedance, and the manufacturer's recommended high-speed layout to preserve reliable link performance.

🧩

IoT Gateways and Edge Nodes

The VSC8502RD-VR is applicable to connected edge nodes that need a wired Ethernet uplink supporting 10, 100, or 1000 Mb/s. Its integrated line-side termination can simplify the physical layer and conserve board area in compact gateways. The common 10/100/1000BASE-T capability also provides deployment flexibility across existing network infrastructure. Use the manufacturer reference circuit to select compatible magnetics and decoupling, then verify thermal, supply, interface-mode, and footprint requirements in the complete datasheet before production release.

What is the VSC8502RD-VR used for?
The VSC8502RD-VR is a Gigabit Ethernet physical-layer transceiver for 10/100/1000BASE-T equipment. According to the Microchip VSC8502 product page, it is intended for space-constrained network products and includes integrated line-side termination. That termination can reduce external-component count, conserve PCB area, lower electromagnetic interference, and improve system performance in compact Ethernet interfaces.
What Ethernet speeds does the VSC8502RD-VR support?
The VSC8502RD-VR supports 10, 100, and 1000 Mb/s operation over 10/100/1000BASE-T copper Ethernet. This multi-rate capability allows one physical-layer device to serve legacy 10 Mb/s and 100 Mb/s links as well as Gigabit connections. The exact auto-negotiation behavior and supported media modes should be confirmed in the complete manufacturer datasheet before a network interface is released.
Where can I download the VSC8502RD-VR datasheet PDF?
The official VSC8502 product page at Microchip Technology provides the authoritative documentation for the VSC8502RD-VR family. Open the product page and select its documentation or datasheet resources. Use the complete PDF for package drawings, pin descriptions, electrical characteristics, interface timing, and application-circuit guidance; the product-page excerpt alone is not sufficient for a production schematic.
Where can I find the VSC8502RD-VR pinout?
The VSC8502RD-VR pinout should be taken from the pin-description table and package drawing in the official Microchip VSC8502 datasheet. Pin numbers, signal names, exposed-pad connections, and no-connect positions must be verified against the exact ordering code. Use those drawings when assigning PCB nets and when checking the package footprint against the selected board outline.
What are the key specifications of VSC8502RD-VR that engineers should know?
The principal known specifications of the VSC8502RD-VR are 10/100/1000 Mb/s operation, support for 10/100/1000BASE-T networks, and integrated line-side termination. The manufacturer identifies space conservation, lower EMI, and improved system performance as benefits of the integrated termination. Supply voltage, pin count, operating-temperature limits, host-interface mode, and electrical thresholds must be taken from the complete datasheet.
Can the VSC8502RD-VR be used in industrial Ethernet equipment?
The VSC8502RD-VR is suitable in principle for industrial Ethernet products that require 10/100/1000BASE-T copper connectivity and a compact physical layer. Its integrated line-side termination can simplify the magnetics-interface area and reduce board space. For industrial use, confirm the device's operating-temperature range, electromagnetic-emissions requirements, immunity expectations, and long-term lifecycle status in the manufacturer documentation.
What can replace the VSC8502RD-VR?
A valid replacement must match the exact package, pinout, digital host interface, electrical characteristics, supported Ethernet modes, and thermal requirements. VSC8502 family variants with different ordering suffixes may differ in package, temperature grade, or delivery format, so the suffix must not be ignored. Use Microchip's cross-reference search and the complete target and candidate datasheets before treating any variant as a drop-in replacement.
Is the VSC8502RD-VR the same as VSC8502XML?
The VSC8502RD-VR and VSC8502XML are members of the broader VSC8502 family, but they should not be treated as identical without package-level verification. Ordering suffixes can encode package construction, temperature grade, and shipping format. Compare the package drawings, pin tables, host interface, Ethernet capabilities, and electrical limits before deciding whether VSC8502XML can replace VSC8502RD-VR on an existing PCB.
When should I choose the VSC8502RD-VR over another VSC8502 variant?
Choose the VSC8502RD-VR when the design requires the exact VSC8502RD-VR qualification, package, pinout, temperature grade, and ordering configuration, as well as support for 10/100/1000BASE-T operation with integrated line-side termination. Another VSC8502 ordering code is preferable only when its documented differences meet the product's environmental, interface, lifecycle, sourcing, or assembly requirements.
Is the VSC8502RD-VR suitable for a space-constrained router design?
The VSC8502RD-VR is explicitly intended for space-constrained 10/100/1000BASE-T applications. Its integrated line-side termination can reduce passive-component count around the Ethernet magnetic interface, while its 10, 100, and 1000 Mb/s support covers multiple link rates. Actual board-area savings depend on the selected magnetics, layer count, placement, and the complete reference design.
How does integrated line-side termination help EMI performance?
Integrated line-side termination places the Ethernet termination function within the PHY rather than requiring the same network to be implemented entirely with discrete board components. Microchip states that the integration conserves board space, lowers EMI, and improves system performance. Designers should still follow the recommended magnetics, power, grounding, and high-speed copper layout because termination alone does not guarantee compliance.
Where can I buy the VSC8502RD-VR and request a quote?
Use the Request a Quote form on this product page to request current availability, pricing, lead time, and minimum-order information for the VSC8502RD-VR. Quote timing can vary with exact ordering code, quantity, and market conditions. Confirm the full suffix and delivery configuration when submitting the request so the commercial response applies to the intended device.
What is the lead time and stock status for VSC8502RD-VR?
Current stock and lead time for the VSC8502RD-VR should be obtained through the Request a Quote form on this page. The manufacturer product page identifies the family as active, but that product status does not guarantee inventory for every ordering code or quantity. State your required quantity, date code, and packaging format when requesting the quotation.
What is the price of the VSC8502RD-VR?
The current VSC8502RD-VR quotation is available through the Request a Quote form on this page. Pricing can depend on order quantity, exact suffix, date code, delivery format, and market conditions. Submit the required quantity and target configuration so the returned offer matches the component that will be placed on your production order.
Does the VSC8502RD-VR require external line-side termination components?
The VSC8502RD-VR family integrates line-side termination to reduce board space, lower EMI, and improve system performance. However, the complete Ethernet magnetics interface can still require passive power-supply and signal-conditioning components specified by the manufacturer. Follow the datasheet reference circuit and magnetics recommendations rather than assuming every passive component around the transformer can be removed.

נתוני עזר הנדסיים עבור VSC8502RD-VR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the VSC8502RD-VR when the design specifically requires the VSC8502 family, 10/100/1000BASE-T copper support, integrated line-side termination, and the exact RD-VR ordering configuration. It is particularly attractive in space-constrained routers, industrial controllers, and edge equipment where PCB area and EMI control matter. Consider VSC8502RD when its ordering-code-specific package, grade, and delivery configuration meet the design and production plan. Consider VSC8502EV only after confirming that its package, electrical characteristics, and operating limits are interchangeable. Consider VSC8502XML for the same reason and because it is available as an internal-link candidate. For every alternative, verify the package drawing, pin table, host interface, supply voltage, clocking, Ethernet modes, temperature range, and exposed-pad requirements against the complete manufacturer datasheet.

השוואה עם חלופות

פרמטר מוצר זה VSC8502RD VSC8502EV VSC8502XML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Ethernet Data Rates 10/100/1000 Mb/s 10/100/1000 Mb/s 10/100/1000 Mb/s 10/100/1000 Mb/s
Supported Physical Layer 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T
Integrated Line-Side Termination Yes Yes Yes Yes
Primary Application Space-constrained 10/100/1000BASE-T equipment Space-constrained 10/100/1000BASE-T equipment Space-constrained 10/100/1000BASE-T equipment Space-constrained 10/100/1000BASE-T equipment
Ordering Suffix RD-VR RD EV XML

מבדילים עיקריים

  • Integrated line-side termination reduces the magnetics-interface component burden (לעומתVSC8502RD)
  • Multi-rate copper Ethernet support in one physical layer (לעומתVSC8502EV)
  • Space and EMI benefit from integrated termination (לעומתVSC8502XML)

הערות תכנון

Use the manufacturer reference layout for the PHY-to-magnetics differential pairs. Keep the 10/100/1000BASE-T traces short, impedance controlled, and continuously referenced to a solid ground plane. Avoid introducing stubs or changing layer transitions beneath the interface area. Because the VSC8502 family integrates line-side termination, preserve the specified placement and spacing of the magnetics and termination network rather than duplicating or rearranging it experimentally.

Integrated line-side termination can lower EMI and reduce board area, but the Ethernet magnics and connector still require controlled layout. Follow the recommended transformer pin orientation, isolation spacing, and copper keepout rules. Check both radiated and conducted emissions at the product level because PHY integration alone does not replace proper grounding, filtering, shielding, or enclosure design.

Do not assume that every VSC8502 ordering suffix has the same footprint, temperature grade, or delivery format. Compare the exact package drawing, pin-description table, electrical limits, and ordering information for VSC8502RD-VR and any proposed substitute. In particular, confirm that the host interface, reference-clock arrangement, supply requirements, and exposed-pad connection are unchanged before treating a variant as a drop-in replacement.

Decouple each supply rail at the device with the capacitance and placement specified in the complete datasheet, and provide the required clock or reset behavior before enabling the PHY. Keep switching regulators and high-current digital paths away from the Ethernet differential interface. Verify the system power budget across 10, 100, and 1000 Mb/s operating conditions because link activity and termination behavior can affect current demand.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were stated for this exact ordering code.

הנתונים אומתו בתאריך: 2026-11-11 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

VSC8502RD-VR datasheet VSC8502RD-VR specifications VSC8502RD-VR pinout VSC8502RD-VR datasheet pdf Microchip VSC8502RD-VR VSC8502RD-VR equivalent VSC8502RD-VR replacement VSC8502RD-VR vs VSC8502XML VSC8502RD-VR price VSC8502RD-VR stock VSC8502RD-VR Gigabit Ethernet PHY VSC8502RD-VR 10/100/1000BASE-T VSC8502RD-VR footprint VSC8502RD-VR router interface

רכיבים ומונחים קשורים

Microchip Technology VSC8502RD-VR VSC8502RD VSC8502EV VSC8502XML Gigabit Ethernet PHY Ethernet physical-layer transceiver 10BASE-T 100BASE-TX 1000BASE-T 10/100/1000 Mb/s line-side termination Ethernet magnetics network interface controller managed switch industrial Ethernet router edge gateway EMI PCB surface mount semiconductor RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר