XC6SLX9-L1FT256I - Spartan-6 LX FPGA, 186 I/O | Xilinx
MPN: XC6SLX9-L1FT256I ✓ פעילXC6SLX9-L1FT256I סקירה
A field-programmable gate array is a programmable digital semiconductor whose logic and interconnect resources are configured after manufacture. The Spartan-6 LX family belongs to the broader FPGA hierarchy, where FPGAs sit between fixed-function logic ICs and larger programmable systems. This device therefore combines the flexibility of software-programmable logic with the parallel processing performance and deterministic I/O behavior required by embedded control systems.
The XC6SLX9-L1FT256I provides 9,152 logic cells, 186 user I/O, and 589,824 equivalent logic gates. Its -1L speed and temperature designations distinguish it from faster Spartan-6 grades and commercial-temperature variants. The 256-ball package supports dense board-level integration without relying on a leaded package. Because FPGA utilization depends on the implemented architecture, timing closure, pin constraints, and I/O standards, not only the nominal cell count, designers should evaluate each design against its actual resource map.
Spartan-6 devices use configurable logic blocks connected by programmable routing and include dedicated resources for memories, multipliers, clock management, and signal processing. This architecture allows parallel datapaths to execute multiple operations per clock cycle and makes the device suitable for deterministic control and high-throughput digital signal processing. The supplied verified data confirms the device family and resources but does not provide detailed block-RAM, DSP-slice, PLL, or maximum I/O-frequency figures for this exact ordering code.
Typical uses include industrial control, embedded instrumentation, communications gateways, data acquisition, digital signal processing, and general-purpose programmable logic. The 186 available user I/O allow external memory, sensors, converters, transceivers, and status or control signals to be integrated close to the FPGA fabric. The compact 256-ball package is especially useful when board area is constrained but a large pin count is required.
Designers should preserve the package-specific pinout and power architecture, assign pins through the supported Xilinx toolchain, and validate all I/O standards against the device constraints. They should also confirm timing, supply requirements, temperature limits, and tool support for the production design before committing the obsolete-capable package to a new platform.
This page combines verified distributor data, same-family drop-in alternatives, application guidance, and practical migration considerations. It highlights where engineers can preserve an existing PCB and where speed-grade, temperature, resource, or toolchain differences still require qualification.
חלופות תחליף ישיר עבור XC6SLX9-L1FT256I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC6SLX9-L1FT256I (אותו גורם צורה וטביעת רגל) — שונים ב Speed Grade, Operating Temperature, Package, Logic Cells, Process Technology.
XC6SLX9-2FT256I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC6SLX9-2FTG256I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC6SLX9-L1FTG256I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC6SLX9-1FT256I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC6SLX9-3FT256I
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC6SLX9-L1FT256I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LX |
| Logic Cells | 9,152 cells |
| Equivalent Logic Gates | 589,824 gates |
| User I/O | 186 I/O |
| מארז | 256-ball LBGA |
| Total Package Balls | 256 balls |
| Logic Architecture | 6-input LUT |
| Speed Grade | -1L |
| Temperature Grade | Industrial |
מדריך תצורת פינים של XC6SLX9-L1FT256I 256 balls
תצורת פינים עבור XC6SLX9-L1FT256I (מארזת 256 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC6SLX9-L1FT256I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC6SLX9-L1FT256I מתאים עבור 6 יישוםs: Industrial Programmable Control, Data Acquisition and Signal Conditioning, Communications Gateway, Digital Signal Processing, Embedded Instrumentation, General-Purpose Embedded Logic.
Industrial Programmable Control
The XC6SLX9-L1FT256I fits industrial programmable control because it combines 9,152 logic cells with 186 user I/O in a 256-ball package. Those resources can implement state machines, interlocks, sequencing, diagnostic logic, and communication handling while retaining deterministic parallel behavior. The -1L industrial ordering code is appropriate when the original design was qualified around that specific device. Implementation should use constrained Xilinx project settings, and designers should verify the exact industrial temperature limits and timing margin from the production documentation.
מומלץ
Data Acquisition and Signal Conditioning
The XC6SLX9-L1FT256I can implement parallel data acquisition, filtering, thresholding, and data formatting because its 9,152 logic cells and 186 user I/O support multiple simultaneous channels. A 256-ball package permits direct connection to converters, sensors, memory, and interface transceivers without a large leaded footprint. Engineers should build the acquisition pipeline around parallel I/O, pipeline registers, and clock-domain controls. The verified data does not state maximum I/O frequencies or ADC-specific functions, so timing closure and converter compatibility must be established in the implementation tools.
מומלץ
Communications Gateway
The XC6SLX9-L1FT256I is suitable for low-to-medium interface aggregation in industrial communications gateways, where 186 user I/O can connect several serial or parallel peripheral interfaces to programmable framing and protocol logic. Its parallel FPGA fabric allows transmit and receive paths to operate concurrently, while the 256-ball package supports a compact board layout. The implementation must define clock domains, constrain I/O timing, and validate protocol behavior against the chosen electrical interface. Because the supplied records do not specify transceiver resources or maximum interface rates, those values must be checked before architecture freeze.
מומלץ
Digital Signal Processing
The XC6SLX9-L1FT256I can support digital signal processing pipelines using its 9,152 logic cells, six-input LUT architecture, and parallel I/O capability. Suitable tasks include filtering, correlation, waveform generation, and fixed-point arithmetic where independent operations benefit from parallel execution. Designers should map multiplies and memory into the appropriate Spartan-6 resources, then check timing closure at the required sample rate. Exact DSP-slice and block-RAM quantities were not included in the verified records, so the available implementation resources must be confirmed from the device data and synthesis results.
מומלץ
Embedded Instrumentation
The XC6SLX9-L1FT256I fits embedded instrumentation that combines sensor conditioning, digital filtering, calibration tables, status reporting, and a host interface. With 186 user I/O and a 256-ball package, it can consolidate interface logic around an FPGA-based measurement engine while keeping the assembly compact. Designers should partition the design into clock domains, use deterministic register stages, and reserve resources for calibration and diagnostics. The -1L industrial identity makes the exact original device preferable when maintaining an existing qualified platform, subject to confirming its complete environmental limits.
מומלץ
General-Purpose Embedded Logic
The XC6SLX9-L1FT256I can act as a general-purpose embedded logic platform for legacy expansion cards, test equipment, custom interface adapters, and specialized controllers. Its 186 user I/O and 9,152 logic cells provide enough parallel connectivity for multi-function glue logic without a processor, while the 256-ball package remains compatible with dense board assembly. A new design should avoid assuming that an FPGA can replace a soft processor automatically; it must define the boot configuration, clocking scheme, memory interface, and programming method. The legacy Spartan-6 toolchain should also be locked and archived for production maintenance.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC6SLX9-L1FT256I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC6SLX9-2FT256I | XC6SLX9-2FTG256I | XC6SLX9-L1FTG256I | XC6SLX9-1FT256I | XC6SLX9-3FT256I |
|---|---|---|---|---|---|---|
| Package | 256-LBGA (FTBGA-256) | 256-LBGA (FTBGA-256) | 256-LBGA (FTBGA-256) | 256-LBGA (FTBGA-256) | 256-LBGA (FTBGA-256) | 256-LBGA (FTBGA-256) |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 9,152 cells | 9,152 cells | 9,152 cells | 9,152 cells | 9,152 cells | 9,152 cells |
| Equivalent Logic Gates | 589,824 gates | 589,824 gates | 589,824 gates | 589,824 gates | 589,824 gates | 589,824 gates |
| User I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O |
| Speed Grade | -1L | -2 | -2 | -1L | -1 | -3 |
| Programming Tool Support | Xilinx ISE Design Suite | Xilinx ISE Design Suite | Xilinx ISE Design Suite | Xilinx ISE Design Suite | Xilinx ISE Design Suite | Xilinx ISE Design Suite |
מבדילים עיקריים
- Exact original -1L device identity (לעומתXC6SLX9-2FT256I)
- Same 256-ball integration level (לעומתXC6SLX9-2FTG256I)
- No resource-count change across the listed alternatives (לעומתXC6SLX9-3FT256I)
הערות תכנון
Treat the 256-ball package as a package-specific BGA rather than a generic 256-ball land pattern. According to the verified DigiChip record, the package is 17 mm by 17 mm with 1 mm pitch. Use AMD's published Spartan-6 package pinout files to verify every ball assignment, including dedicated configuration, clock, power, and ground balls. Do not derive the pinout from a visually similar XC6 device because unused or dedicated balls can differ even when the package dimensions match.
A same-family MPN with the same 256-ball package is not automatically a drop-in replacement. The target uses the -1L ordering code, while alternatives can use -1, -2, or -3 grades and different FT/FTG suffixes. Compare the exact package pinout, supported temperature range, speed grade, bitstream configuration, and timing closure before substitution. For an existing Spartan-6 design, preserve the original Xilinx ISE project and device constraints as the baseline.
Plan the FPGA's supply rails and decoupling from the exact device power table rather than from generic Spartan-6 guidance. The supplied verified records confirm the FPGA family and 256-ball package but do not include the XC6SLX9-L1FT256I core voltage, I/O voltage, current limits, power-up sequencing, or decoupling values. Those parameters must be obtained from the manufacturer document before schematic layout and power-budget review.
Reserve clean routing for configuration pins and clock inputs, and keep sensitive interfaces away from likely switching-current paths. Although the verified data does not provide the detailed package ball map, the AMD Spartan-6 package files provide the authoritative assignments. During layout review, verify that every assigned pin supports the intended I/O standard and that unused pins follow the manufacturer's termination requirements. Preserve those checks as part of manufacturing and board bring-up procedures.
מידע על תאימות
The supplied verified records identify an industrial Spartan-6 LX FPGA but do not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable to the industrial-grade ordering code identified in the supplied data.
