XC7K325T-3FBG676E - 326K Logic Cell Kintex-7 FPGA | AMD
MPN: XC7K325T-3FBG676E ✓ פעילXC7K325T-3FBG676E סקירה
A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA > field-programmable gate array > programmable logic device > semiconductor. Unlike a fixed-function ASIC or processor, an FPGA combines programmable logic blocks, programmable I/O, embedded memory, clocking resources, and dedicated hardware resources in one configurable device. This combination allows parallel datapaths, protocol handling, signal processing, and interface bridging to be implemented in a single integrated circuit.
The XC7K325T device provides 326,080 logic cells and 164,480 registers, according to its product listings. Its 28 nm Kintex-7 architecture is positioned between lower-cost Artix-7 devices and higher-capacity Virtex-7 devices. The -3 grade is identified as the highest-performance Kintex-7 speed option, while the extended-temperature suffix supports designs operating across an extended industrial temperature range. The device is supplied in a 676-pin lidless FCBGA package.
The FBG676 package provides a dense ball-grid footprint and requires a multilayer PCB with controlled escape routing and power-plane integrity. A high-pin-count BGA also makes thermal management, solder-paste printing, X-ray inspection, and assembly rework important manufacturing considerations. The exact electrical limits, I/O standards, memory quantities, clock resources, and recommended operating conditions should be confirmed in the AMD Kintex-7 documentation before schematic capture or PCB release.
Typical applications include high-speed signal processing, industrial control, communications infrastructure, test and measurement, machine vision, and embedded systems requiring deterministic parallel logic. The 326,080-cell device is appropriate when multiple pipelines, lookup tables, block RAM, serial transceivers, and general-purpose I/O must be combined in a compact reconfigurable platform. It is especially useful where firmware-only updates cannot accommodate changing algorithms or interface combinations.
For new designs, preserve the FBG676 footprint and verify every power rail, decoupling requirement, configuration interface, clock topology, and high-speed I/O constraint before substitution. Pin-compatible alternatives may differ in speed grade or temperature grade, so their power characteristics, timing margins, and qualification requirements must be reviewed independently rather than treated as automatically equivalent.
This product page consolidates the verified Kintex-7 device identity, package information, sourcing links, drop-in alternatives, and engineering guidance. It also distinguishes true same-footprint choices from options that require a larger package or a different device architecture, helping designers shortlist replacements without overlooking timing, thermal, or PCB constraints.
חלופות תחליף ישיר עבור XC7K325T-3FBG676E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7K325T-3FBG676E (אותו גורם צורה וטביעת רגל) — שונים ב Speed Grade, Mounting Type, Core Voltage, Logic Cells, Operating Temperature.
XC7K325T-2FBG676I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K325T-2FBG676C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K325T-1FBG676I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K325T-1FBG676C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K325T-3FBG676C
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7K325T-3FBG676E דירוגים מרביים ומאפיינים חשמליים
| Device Type | Kintex-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 326,080 cells |
| Registers | 164,480 registers |
| Maximum Stated Frequency | 1,098 MHz |
| Process Technology | 28 nm |
| Speed Grade | -3 |
| Temperature Grade | Extended |
| Core Supply Voltage | 1 V |
| Package Type | 676-ball FCBGA |
| Package Designation | FBG676 |
| Package Form | 676-BBGA, lidless FCBGA |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
| Shipping Format | Tray |
מדריך תצורת פינים של XC7K325T-3FBG676E 676-bbga, lidless fcbga
תצורת פינים עבור XC7K325T-3FBG676E (מארזת 676-bbga, lidless fcbga). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7K325T-3FBG676E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7K325T-3FBG676E מתאים עבור 6 יישוםs: High-Speed Communications Processing, Industrial Control and Automation, Digital Signal Processing, Test and Measurement Equipment, Machine Vision and Image Processing, Aerospace and Defense Systems.
High-Speed Communications Processing
The XC7K325T-3FBG676E fits communications systems requiring parallel packet processing, protocol conversion, and deterministic control logic. Its 326,080 logic cells and 164,480 registers provide substantial configurable capacity, while the -3 grade is positioned for higher performance than the -1 and -2 Kintex-7 options. The FBG676 package provides a high pin count for external memory and high-speed interfaces. In implementation, engineers can build parallel lanes around dedicated I/O resources while programmable logic handles framing, buffering, and control. The principal trade-off is thermal and timing validation: replacing the -3 grade with a lower-speed device requires recompilation and timing review.
מומלץ
Industrial Control and Automation
The XC7K325T-3FBG676E is suitable for industrial controllers that combine multiple machine-control loops, sensor acquisition, communications gateways, and safety-monitoring logic. The extended-temperature E designation is the relevant distinction when selecting this configuration for industrial environments. Its 326,080-cell Kintex-7 resource level allows parallel datapaths to execute concurrently rather than serializing work in a processor. The 676-ball FCBGA also offers more I/O connectivity than a lower-pin-count package. Design teams should use the official FBG676 pinout file to assign differential, single-ended, and configuration pins, and must verify timing, isolation, and power requirements for the deployed temperature range.
מומלץ
Digital Signal Processing
The XC7K325T-3FBG676E can implement parallel filtering, modulation, correlation, and fixed-function acceleration using programmable logic, block RAM, and dedicated processing resources. The -3 grade is appropriate when a Kintex-7 implementation is intended to outperform lower-speed grades, and 326,080 logic cells permit multiple independent pipelines to operate concurrently. Designers can place data acquisition, preprocessing, and control in one device while using the FBG676 package for high-speed memory and peripheral connectivity. Before layout, confirm the exact block-RAM, DSP, clock, and I/O quantities in the AMD family tables, then validate external memory timing because package transitions and board loss can constrain sustained throughput.
מומלץ
Test and Measurement Equipment
The XC7K325T-3FBG676E fits instrument-control and pattern-generation systems that need deterministic timing, flexible acquisition logic, and numerous peripheral connections. Programmable logic can combine trigger handling, data formatting, sequence control, and interface management without relying entirely on a general-purpose processor. Its 1,098 MHz stated maximum frequency and -3 speed grade provide performance margin for demanding timing paths, although board-level timing must be constrained and verified. The FBG676 footprint supports external converters, memory, and clocking resources through its extensive I/O network. Thermal design is important because sustained logic utilization can raise junction temperature even when no individual interface operates at a maximum data rate.
מומלץ
Machine Vision and Image Processing
The XC7K325T-3FBG676E is well suited to machine-vision pipelines that must capture, transform, and classify image data with predictable latency. Its 326,080 logic cells support parallel pixel operations, while 164,480 registers support buffering, line processing, and pipeline control. The -3 grade is attractive for image pipelines sensitive to frame latency, and the FBG676 package supplies enough connections for sensors, memory, and high-speed output interfaces. A practical implementation separates acquisition, preprocessing, and decision logic into timed parallel paths. Designers should match camera and memory interfaces to supported I/O standards, apply AMD timing constraints, and confirm that PCB signal integrity remains adequate when sensor, memory, and control traffic share the same FBG676 device.
מומלץ
Aerospace and Defense Systems
The XC7K325T-3FBG676E can support reconfigurable embedded systems in aerospace, defense, and ruggedized equipment where parallel processing and deterministic behavior are valuable. Its extended-temperature designation distinguishes it from the commercial-temperature XC7K325T-3FBG676C option, while the -3 grade offers the highest Kintex-7 performance class. Engineers can use programmable logic for interface adaptation, real-time data paths, and fault-monitoring functions. However, AEC-Q100 qualification is not established for this ordering code, so the exact product must be reviewed against the applicable program requirements. Board-level considerations include controlled impedance, multilayer power distribution, thermal analysis, and exact configuration-data handling.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7K325T-3FBG676E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7K325T-2FBG676I | XC7K325T-2FBG676C | XC7K325T-1FBG676I | XC7K325T-1FBG676C | XC7K325T-3FBG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBG676, 676-ball lidless FCBGA | FBG676, 676-ball lidless FCBGA | FBG676, 676-ball lidless FCBGA | FBG676, 676-ball lidless FCBGA | FBG676, 676-ball lidless FCBGA | FBG676, 676-ball lidless FCBGA |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| Registers | 164,480 registers | 164,480 registers | 164,480 registers | 164,480 registers | 164,480 registers | 164,480 registers |
| Speed Grade | -3 | -2 | -2 | -1 | -1 | -3 |
| Temperature Designation | Extended | Industrial | Commercial | Industrial | Commercial | Commercial |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
מבדילים עיקריים
- Highest Kintex-7 speed grade in the listed alternatives (לעומתXC7K325T-2FBG676I)
- Extended-temperature designation with the -3 speed grade (לעומתXC7K325T-3FBG676C)
- Higher performance class than the -1 alternatives (לעומתXC7K325T-1FBG676I)
הערות תכנון
Use the official AMD FBG676 package pinout and UG475-format package files when defining the symbol and footprint. Route every power and ground ball according to the device power architecture, keep decoupling branches short, and reserve continuous return-path geometry below high-speed interfaces. A generic 676-ball land pattern should not be substituted because ball pitch, pad construction, and power-ball assignments must match the Kintex-7 package exactly.
Analyze the FPGA, memory, and adjacent regulators together because the XC7K325T-3FBG676E can consume substantial power under high logic utilization. Use the power distribution network with adequate copper and thermal-via density to spread heat across the 676-ball package. Validate the board in the intended airflow and temperature environment, and ensure that the extended-temperature product grade covers every internal operating condition rather than only the external enclosure temperature.
Keep configuration interfaces, clocks, reset, and JTAG debug connections away from high-speed signal regions where possible. Apply the AMD clocking recommendations for each external and internally generated clock domain, constrain input delays and output delays, and verify board-level timing after the exact speed grade is selected. Migration from -3 to a -2 or -1 alternative requires rerunning timing analysis because a pin-compatible footprint does not preserve timing margin.
Do not treat package compatibility as complete device equivalence. The -3, -2, and -1 speed grades can have different timing characteristics and power behavior, while C, E, and I suffixes identify different temperature grades. Before approving a replacement, compare the complete ordering code, operating-temperature limits, configuration data, power estimates, security features, and qualification requirements. Also avoid moving to an FBG900 option unless the PCB is physically redesigned.
מידע על תאימות
RoHS compliance is identified for the exact device in Kintex-7 comparison information. REACH, halogen-free, conflict-minerals, and AEC-Q100 status are not established for this ordering code.