ADC104S051CIMM vs ADC104S101CIMM तुलना
विस्तृत दोनों ओर की तुलना ADC104S051CIMM द्वारा Texas Instruments और ADC104S101CIMM द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ADC104S051CIMM - 10-Bit 4-Ch 200-500ksps SAR ADC | Texas Instruments
ADC104S051CIMM ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADC104S051CIMM | ADC104S101CIMM |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 10 bit | 10 bit |
| Number of Input Channels | 4 (single-ended, multiplexed) | 4 |
| Converter Architecture | Successive Approximation (SAR) | — |
| Sample Rate | 200 ksps to 500 ksps | — |
| Analog Supply Voltage | 2.7 V to 5.25 V | — |
| Digital I/O Supply | Same as AVDD (single-supply operation) | — |
| Analog Input Voltage Range | 0 V to AVDD | — |
| Typical Power Consumption (3V) | 2.7 mW | — |
| Typical Power Consumption (5V) | 8.6 mW | — |
| Serial Interface | SPI / QSPI / MICROWIRE compatible, mode 0/3 | — |
| Output Data Format | Straight binary, 16-bit serial frame | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C | -40 C to +85 C (Industrial) |
| पैकेज | 10-pin VSSOP (DGS), 3 mm x 3 mm | 10-pin VSSOP (DGS) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | [DATA_NEEDED: MSL level] | — |
| Screening Level | Industrial | — |
| Architecture | — | SAR (Successive Approximation Register) |
| Sample Rate Range | — | 500 ksps to 1 Msps |
| Input Type | — | Single-Ended |
| Supply Voltage (AVDD/DVDD) | — | 2.7 V to 5.25 V (single supply) |
| Supply Current (typ) | — | [DATA_NEEDED: supply current at 1 Msps] |
| Power Consumption (3 V supply) | — | 3.9 mW (typ) |
| Power Consumption (5 V supply) | — | 11.4 mW (typ) |
| Digital Interface | — | SPI, QSPI, MICROWIRE, DSP-compatible serial |
| Output Format | — | Straight Binary |
| INL (max) | — | [DATA_NEEDED: integral nonlinearity] |
| DNL (max) | — | [DATA_NEEDED: differential nonlinearity] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio] |