ADC104S051CIMM vs ADC104S101CIMM مقایسه
مقایسه دقیق کنار به کنار ADC104S051CIMM توسط Texas Instruments و ADC104S101CIMM توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
ADC104S051CIMM - 10-Bit 4-Ch 200-500ksps SAR ADC | Texas Instruments
ADC104S051CIMM ✓ فعالمقایسه مشخصات
| پارامتر | ADC104S051CIMM | ADC104S101CIMM |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | ADC/DAC | ADC/DAC |
| وضعیت چرخه عمر | فعال | فعال |
| رزولوشن | 10 bit | 10 bit |
| Number of Input Channels | 4 (single-ended, multiplexed) | 4 |
| Converter Architecture | Successive Approximation (SAR) | — |
| Sample Rate | 200 ksps to 500 ksps | — |
| Analog Supply Voltage | 2.7 V to 5.25 V | — |
| Digital I/O Supply | Same as AVDD (single-supply operation) | — |
| Analog Input Voltage Range | 0 V to AVDD | — |
| Typical Power Consumption (3V) | 2.7 mW | — |
| Typical Power Consumption (5V) | 8.6 mW | — |
| Serial Interface | SPI / QSPI / MICROWIRE compatible, mode 0/3 | — |
| Output Data Format | Straight binary, 16-bit serial frame | — |
| محدوده دمای کاری | -40 C to +85 C | -40 C to +85 C (Industrial) |
| بسته‌بندی | 10-pin VSSOP (DGS), 3 mm x 3 mm | 10-pin VSSOP (DGS) |
| نوع نصب | Surface Mount | Surface Mount |
| وضعیت RoHS | Compliant | Compliant |
| سطح MSL | [DATA_NEEDED: MSL level] | — |
| Screening Level | Industrial | — |
| Architecture | — | SAR (Successive Approximation Register) |
| Sample Rate Range | — | 500 ksps to 1 Msps |
| Input Type | — | Single-Ended |
| Supply Voltage (AVDD/DVDD) | — | 2.7 V to 5.25 V (single supply) |
| Supply Current (typ) | — | [DATA_NEEDED: supply current at 1 Msps] |
| Power Consumption (3 V supply) | — | 3.9 mW (typ) |
| Power Consumption (5 V supply) | — | 11.4 mW (typ) |
| Digital Interface | — | SPI, QSPI, MICROWIRE, DSP-compatible serial |
| Output Format | — | Straight Binary |
| INL (max) | — | [DATA_NEEDED: integral nonlinearity] |
| DNL (max) | — | [DATA_NEEDED: differential nonlinearity] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio] |