ADC104S051CIMM vs ADC104S101CIMM Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADC104S051CIMM tarafından Texas Instruments ve ADC104S101CIMM tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
ADC104S051CIMM - 10-Bit 4-Ch 200-500ksps SAR ADC | Texas Instruments
ADC104S051CIMM ✓ AktifÖzellik Karşılaştırması
| Parametre | ADC104S051CIMM | ADC104S101CIMM |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Çözünürlük | 10 bit | 10 bit |
| Number of Input Channels | 4 (single-ended, multiplexed) | 4 |
| Converter Architecture | Successive Approximation (SAR) | — |
| Sample Rate | 200 ksps to 500 ksps | — |
| Analog Supply Voltage | 2.7 V to 5.25 V | — |
| Digital I/O Supply | Same as AVDD (single-supply operation) | — |
| Analog Input Voltage Range | 0 V to AVDD | — |
| Typical Power Consumption (3V) | 2.7 mW | — |
| Typical Power Consumption (5V) | 8.6 mW | — |
| Serial Interface | SPI / QSPI / MICROWIRE compatible, mode 0/3 | — |
| Output Data Format | Straight binary, 16-bit serial frame | — |
| İşletim Sıcaklığı Aralığı | -40 C to +85 C | -40 C to +85 C (Industrial) |
| Paket | 10-pin VSSOP (DGS), 3 mm x 3 mm | 10-pin VSSOP (DGS) |
| Montaj Türü | Surface Mount | Surface Mount |
| RoHS Durumu | Compliant | Compliant |
| MSL Seviyesi | [DATA_NEEDED: MSL level] | — |
| Screening Level | Industrial | — |
| Architecture | — | SAR (Successive Approximation Register) |
| Sample Rate Range | — | 500 ksps to 1 Msps |
| Input Type | — | Single-Ended |
| Supply Voltage (AVDD/DVDD) | — | 2.7 V to 5.25 V (single supply) |
| Supply Current (typ) | — | [DATA_NEEDED: supply current at 1 Msps] |
| Power Consumption (3 V supply) | — | 3.9 mW (typ) |
| Power Consumption (5 V supply) | — | 11.4 mW (typ) |
| Digital Interface | — | SPI, QSPI, MICROWIRE, DSP-compatible serial |
| Output Format | — | Straight Binary |
| INL (max) | — | [DATA_NEEDED: integral nonlinearity] |
| DNL (max) | — | [DATA_NEEDED: differential nonlinearity] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio] |