ADC104S051CIMM vs ADC104S101CIMM موازنہ
تفصیلی ساتھ ساتھ موازنہ از ADC104S051CIMM بذریعہ Texas Instruments اور ADC104S101CIMM بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
ADC104S051CIMM - 10-Bit 4-Ch 200-500ksps SAR ADC | Texas Instruments
ADC104S051CIMM ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ADC104S051CIMM | ADC104S101CIMM |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | ADC/DAC | ADC/DAC |
| لائف سائیکل کی حالت | فعال | فعال |
| ریزولوشن | 10 bit | 10 bit |
| Number of Input Channels | 4 (single-ended, multiplexed) | 4 |
| Converter Architecture | Successive Approximation (SAR) | — |
| Sample Rate | 200 ksps to 500 ksps | — |
| Analog Supply Voltage | 2.7 V to 5.25 V | — |
| Digital I/O Supply | Same as AVDD (single-supply operation) | — |
| Analog Input Voltage Range | 0 V to AVDD | — |
| Typical Power Consumption (3V) | 2.7 mW | — |
| Typical Power Consumption (5V) | 8.6 mW | — |
| Serial Interface | SPI / QSPI / MICROWIRE compatible, mode 0/3 | — |
| Output Data Format | Straight binary, 16-bit serial frame | — |
| آپریٹنگ درجہ حرارت رینج | -40 C to +85 C | -40 C to +85 C (Industrial) |
| پیکیج | 10-pin VSSOP (DGS), 3 mm x 3 mm | 10-pin VSSOP (DGS) |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface Mount |
| RoHS اسٹیٹس | Compliant | Compliant |
| MSL لیول | [DATA_NEEDED: MSL level] | — |
| Screening Level | Industrial | — |
| Architecture | — | SAR (Successive Approximation Register) |
| Sample Rate Range | — | 500 ksps to 1 Msps |
| Input Type | — | Single-Ended |
| Supply Voltage (AVDD/DVDD) | — | 2.7 V to 5.25 V (single supply) |
| Supply Current (typ) | — | [DATA_NEEDED: supply current at 1 Msps] |
| Power Consumption (3 V supply) | — | 3.9 mW (typ) |
| Power Consumption (5 V supply) | — | 11.4 mW (typ) |
| Digital Interface | — | SPI, QSPI, MICROWIRE, DSP-compatible serial |
| Output Format | — | Straight Binary |
| INL (max) | — | [DATA_NEEDED: integral nonlinearity] |
| DNL (max) | — | [DATA_NEEDED: differential nonlinearity] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio] |