ADM485AQ vs ADM485ARZ तुलना

विस्तृत दोनों ओर की तुलना ADM485AQ द्वारा Analog Devices और ADM485ARZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM485AQ ADM485AQ - 5 V Low-Power RS-485/422 Transceiver | Analog Devices

ADM485AQ - 5 V Low-Power RS-485/422 Transceiver | Analog Devices

ADM485AQ ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM485AQ ADM485ARZ
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Differential RS-485/RS-422 line transceiver —
सप्लाई वोल्टेज 5 V 5 V (single supply)
Maximum Data Rate 5 Mbit/s —
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Communication Standards EIA RS-485 and RS-422 —
टोपोलॉजी Bidirectional multipoint bus transmission lines —
ऑपरेटिंग तापमान रेंज Commercial and industrial temperature range -40 C to +85 C
पैकेज 8-pin ceramic DIP SOIC-8 (SO-8) / SO-8
Package Designation AQ —
Switching Speed Extremely fast switching speed —
Driver Propagation Delay Minimal —
Differential Signaling Balanced data transmission —
EMI Behavior Low skew is designed to minimize EMI interference —
माउंटिंग स्टाइल Through-hole —
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] Unaffected
Automotive Qualification [DATA_NEEDED: AEC-Q100 status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Absolute Maximum Ratings [DATA_NEEDED: absolute maximum ratings] —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
सप्लाई करंट [DATA_NEEDED: supply current] —
Differential Output Voltage [DATA_NEEDED: differential output voltage] —
Receiver Input Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Power Dissipation [DATA_NEEDED: power dissipation] —
Type — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
डेटा दर — 5 Mbps (max)
Receiver Hysteresis — [DATA_NEEDED: receiver hysteresis]
Common-Mode Range — -7 V to +12 V
Driver Differential Output — [DATA_NEEDED: VOD min/max]
माउंटिंग प्रकार — Surface Mount
ESD Protection — [DATA_NEEDED: ESD HBM rating]
MSL स्तर — 1 (Unlimited)
Compliance — ROHS3 Compliant
Enable Pins — Yes (DE driver enable, RE receiver enable, active-low/GPIO logic)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध